FM Or BAPI to get County Code
Hi,
Is there's any FM or BAPI to return the County Code associated with County Name?
Thzs for the help
regards
Jaime Cordeiro
Hi
County or Region both are stored in the same field ADRC-REGION
try the fun mdule
I_SMPM_ADDRESS_GET
which returns the address fields like REGION etc for the given address number
Reward points for useful Answers
Regards
Anji
Similar Messages
-
Is there any FM or BAPI to get list of all sales orders
Hello all,
I have the requirement like below.
Is there any FM if i Pass Drawing document no, type,part,revision level which gives
the output list as.
1) all sales orders, where the above drawing document no is attached to the materials
and these materials are used as one of the lower level components in the Sales order BOM,
I need to show all those sales orders along with SO number,item,Material,Plant and BOM Item no,
2)all sales orders, where the above drawing document no is attached to the materials
and the same material is one of the item in sales order.
3)all sales orders, where the above drawing document no is used as one of the component in Sales order BOm's
Addition of 1,2,3 will be the o/p.
are there any FM or BAPI to get the above list.
Basically the above report is concatenation of report outputs of t-code CSD5 and CS15.
Awaiting reply.
Thanks.Hi venkatesh,
You can use the BAPI
BAPISDORDER_GETDETAILEDLIST
to get list of all sales orders.
Here is a lik which provides you BAPI'S regarding everything.
[http://www.saptechies.com/sap-bapi-list/]
Hope this will help you.
Regards,
Pavan. -
A Function or BAPI to get Material Standard Price?
Hi All,
I need a Function or BAPI to get the Material Standard Price when the following Criteria is given;
1. Material Code
2. Plant
3. Period
4. Year
5. Company Currency (Optional)
I need only the Standard Price and Price Unit. Please give me a example with sample values.
Thanks,
KishanSri:
I need only the Standard Price and Price Unit
there is no specific FM for that.
you need to write small select query in FM than use this custom FM into your program.
Amit. -
BAPI To get GL Line items (Open Item Managed GL)
Hi,
I am looking for a BAPI to get GL open line items that usually I can download from FBL3N. This is required for Open Item managed GLs. The BAPI can be similar to that of BAPI_AP_ACC_GETOPENITEMS or BAPI_AR_ACC_GETOPENITEMS.
Thanks in advance for your response.
Best Regards,
DusmantaHi Maple,
Try out with the following BAPI's:
BAPI_GL_ACC_GETDETAIL : G/L Account Details
BAPI_GL_ACC_GETLIST : List of G/L Account for each company code
Hope this will be helpful.
Regards,
A.Fahrudeen -
BAPI to get the Material in Stock
Hi Experts,
I have requirement in which I have to call the function module(RFC Enabled) or BAPI which give the following fields as listed below
1.Plant
2.Material
3.Material description
4.Batch number
5.Material type
6.Basic unit of measure
7.Storage location
8.Unrestricted quantity (not consignment)
9.Reserved quantity
10.Quantity under inspection,
11.Blocked
12.Returns
13.Stock in transit
Please help me out soon.
Thanks and regards,
Kuldeep VermaHi,
BAPI_MATERIAL_AVAILABILITY is the correct BAPI to get the details.
here is the sample code:
REPORT ZREPORT_MAT.
data: ENDLEADTME type BAPICM61M-WZTER,
AV_QTY_PLT type BAPICM61V-WKBST,
DIALOGFLAG type BAPICM61V-DIAFL,
RETURN type BAPIRETURN,
WMDVSX type table of BAPIWMDVS,
WMDVEX type table of BAPIWMDVE.
CALL FUNCTION 'BAPI_MATERIAL_AVAILABILITY'
EXPORTING
plant = '1100'
material = '000000000300000292'
unit = 'EA'
CHECK_RULE =
STGE_LOC =
BATCH =
CUSTOMER =
DOC_NUMBER =
ITM_NUMBER =
WBS_ELEM =
STOCK_IND =
DEC_FOR_ROUNDING =
DEC_FOR_ROUNDING_X =
READ_ATP_LOCK =
READ_ATP_LOCK_X =
MATERIAL_EVG =
IMPORTING
ENDLEADTME = ENDLEADTME
AV_QTY_PLT = AV_QTY_PLT
DIALOGFLAG = DIALOGFLAG
RETURN = RETURN
tables
wmdvsx = WMDVSX
wmdvex = WMDVEX
break developer.
write:/ AV_QTY_PLT.
Reward points if useful. -
BAPI to get the Sales order line item details
Hi,
My program gets Sale sorder and item as the input and I need to fetch all the item (Given item) details for this Sales Order from VBAP. Is there any BAPI to get the item details?Hi,
This is a sample code of BAPI.Try to map it to your requirement.This is not related to vendor.This is related to sales order.
Constants
CONSTANTS: c_contract LIKE vbak-vbeln VALUE '0020000720',
c_item LIKE vbap-posnr VALUE '000010'.
Structures
Structure to hold BAPI Header
DATA: st_bapisdhd1 LIKE bapisdhd1.
Internal Tables
Sales Order Create BAPI Return Messages
DATA: tbl_return TYPE STANDARD TABLE OF bapiret2
WITH HEADER LINE.
Sales Order BAPI Line Item
DATA: tbl_bapisditm TYPE STANDARD TABLE OF bapisditm
WITH HEADER LINE.
Sales Order BAPI Line Item
DATA: tbl_bapisditmx TYPE STANDARD TABLE OF bapisditmx
WITH HEADER LINE.
Sales Order BAPI Pricing Conditions
DATA: tbl_bapicond TYPE STANDARD TABLE OF bapicond
WITH HEADER LINE.
Sales Order BAPI Partner Functions
DATA: tbl_bapiparnr TYPE STANDARD TABLE OF bapiparnr
WITH HEADER LINE.
Sales Order BAPI Schedule Lines
DATA: tbl_bapischdl TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
Sales Order BAPI Schedule Lines
DATA: tbl_bapischdlx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
Sales Order BAPI Pricing Conditions
DATA: tbl_bapicondx TYPE STANDARD TABLE OF bapicondx
WITH HEADER LINE.
Customer Enhancement for VBAK, VBAP, VBEP
DATA: tbl_bapiparex TYPE STANDARD TABLE OF bapiparex
WITH HEADER LINE.
Table to hold BAPI Detail Conditions
DATA: tbl_bapisdcond TYPE STANDARD TABLE OF bapisdcond
WITH HEADER LINE.
Table to hold Return Messages from Sales Order Change BAPI
DATA: tbl_return_chg TYPE STANDARD TABLE OF bapiret2
WITH HEADER LINE.
Variables
DATA: g_vbeln_created LIKE vbak-vbeln,
g_valid_contract TYPE c,
g_cont_price_date TYPE d.
Start of Selection
START-OF-SELECTION.
PERFORM validate_contract.
PERFORM create_sales_ord.
PERFORM update_sales_ord.
End of Selection
END-OF-SELECTION.
PERFORM write_output_report.
Subroutines
*& Form create_sales_ord
Create the Sales Order
FORM create_sales_ord .
PERFORM populate_bapi_tables.
PERFORM call_create_sales_ord_bapi.
ENDFORM. " create_sales_ord
*& Form populate_bapi_tables
Fill up the BAPI Tables
FORM populate_bapi_tables .
PERFORM populate_bapi_header.
PERFORM build_bapi_partners.
PERFORM build_bapi_items.
PERFORM build_bapi_sched_lines.
ENDFORM. " populate_bapi_tables
*& Form populate_bapi_header
Build BAPI Header Details
FORM populate_bapi_header .
CLEAR st_bapisdhd1.
st_bapisdhd1-doc_type = 'ZOC'. "Order type
st_bapisdhd1-sales_org = '026'. "Sales Org
st_bapisdhd1-distr_chan = '00'. "Dist Channel
st_bapisdhd1-division = '00'. "Division
st_bapisdhd1-purch_no_c = 'Cust Po No'. "Cust PO No
st_bapisdhd1-name = 'Orderer'. "Name of Orderer
st_bapisdhd1-ord_reason = ''. "Order Reason
st_bapisdhd1-sales_off = '3001'. "Sales Office
st_bapisdhd1-sales_grp = '301'. "Market Area
IF g_valid_contract = 'X'.
st_bapisdhd1-price_date = g_cont_price_date.
ENDIF.
ENDFORM. " populate_bapi_header
*& Form build_bapi_partners
Build BAPI Partner Functions
FORM build_bapi_partners .
CLEAR tbl_bapiparnr.
tbl_bapiparnr-partn_role = 'AG'.
tbl_bapiparnr-partn_numb = '0000100750'.
APPEND tbl_bapiparnr.
CLEAR tbl_bapiparnr.
tbl_bapiparnr-partn_role = 'WE'.
tbl_bapiparnr-partn_numb = '0000504472'.
APPEND tbl_bapiparnr.
ENDFORM. " build_bapi_partners
*& Form build_bapi_items
Build The BAPI Line Items
FORM build_bapi_items .
DATA: l_matnr LIKE mara-matnr.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = '10000072'
IMPORTING
output = l_matnr.
CLEAR tbl_bapisditm.
tbl_bapisditm-itm_number = c_item.
IF g_valid_contract = 'X'.
tbl_bapisditm-ref_doc = c_contract.
tbl_bapisditm-ref_doc_it = c_item.
tbl_bapisditm-ref_doc_ca = 'G'. "Contract
ENDIF.
tbl_bapisditm-material = l_matnr.
tbl_bapisditm-plant = '3012'.
tbl_bapisditm-target_qty = '5.000'.
tbl_bapisditm-target_qu = 'M3'.
tbl_bapisditm-item_categ = 'ZZOC'.
tbl_bapisditm-sales_dist = '301'.
tbl_bapisditm-dlv_prio = '02'.
tbl_bapisditm-prc_group5 = '080'.
tbl_bapisditm-cust_mat35 = 'kdmat'.
tbl_bapisditm-route = 'TESYS'.
tbl_bapisditm-usage_ind = 'CIV'.
APPEND tbl_bapisditm.
CLEAR tbl_bapisditmx.
tbl_bapisditmx-itm_number = c_item.
tbl_bapisditmx-ref_doc = 'X'.
tbl_bapisditmx-ref_doc_it = 'X'.
tbl_bapisditmx-ref_doc_ca = 'X'.
tbl_bapisditmx-material = 'X'.
tbl_bapisditmx-updateflag = 'I'.
tbl_bapisditmx-plant = 'X'.
tbl_bapisditmx-target_qty = 'X'.
tbl_bapisditmx-target_qu = 'X'.
tbl_bapisditmx-item_categ = 'X'.
tbl_bapisditmx-sales_dist = 'X'.
tbl_bapisditmx-dlv_prio = 'X'.
tbl_bapisditmx-prc_group5 = 'X'.
tbl_bapisditmx-cust_mat35 = 'X'.
tbl_bapisditmx-usage_ind = 'X'.
tbl_bapisditmx-route = 'X'.
APPEND tbl_bapisditmx.
ENDFORM. " build_bapi_items
*& Form build_bapi_sched_lines
Build the BAPI Schedule Lines
FORM build_bapi_sched_lines .
CLEAR tbl_bapischdl.
tbl_bapischdl-itm_number = c_item.
tbl_bapischdl-req_qty = '1'.
tbl_bapischdl-req_date = sy-datum.
APPEND tbl_bapischdl.
ENDFORM. " build_bapi_sched_lines
*& Form build_bapi_conditions
Pull the BAPI Pricing Conditions from the Contract
FORM build_bapi_conditions .
LOOP AT tbl_bapisdcond.
CLEAR tbl_bapicond.
MOVE-CORRESPONDING tbl_bapisdcond TO tbl_bapicond.
APPEND tbl_bapicond.
CLEAR tbl_bapicondx.
tbl_bapicondx-itm_number = tbl_bapicond-itm_number.
tbl_bapicondx-cond_st_no = tbl_bapicond-cond_st_no.
tbl_bapicondx-cond_count = tbl_bapicond-cond_count.
tbl_bapicondx-cond_type = tbl_bapicond-cond_type.
tbl_bapicondx-updateflag = 'I'.
tbl_bapicondx-cond_value = 'X'.
tbl_bapicondx-currency = 'X'.
tbl_bapicondx-cond_unit = 'X'.
tbl_bapicondx-cond_p_unt = 'X'.
tbl_bapicondx-varcond = tbl_bapicond-varcond.
APPEND tbl_bapicondx.
ENDLOOP.
ENDFORM. " build_bapi_conditions
*& Form call_create_sales_ord_bapi
Call the Sales Order Create BAPI
FORM call_create_sales_ord_bapi .
CLEAR g_vbeln_created.
CALL FUNCTION 'BAPI_SALESORDER_CREATEFROMDAT2'
EXPORTING
order_header_in = st_bapisdhd1
IMPORTING
salesdocument = g_vbeln_created
TABLES
return = tbl_return
order_items_in = tbl_bapisditm
order_items_inx = tbl_bapisditmx
order_partners = tbl_bapiparnr
order_schedules_in = tbl_bapischdl.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDFORM. " call_create_sales_ord_bapi
*& Form update_sales_ord
Update the newly created Sales Order with the Pricing Conditions
from the Contract
FORM update_sales_ord .
CHECK g_valid_contract EQ 'X'.
PERFORM get_contract_details.
PERFORM build_bapi_conditions.
PERFORM call_change_sales_ord_bapi.
ENDFORM. " update_sales_ord
*& Form get_contract_details
Get Contract Details
FORM get_contract_details .
Need to manually get the relevant Pricing Conditions as the BAPI
BAPISDORDER_GETDETAILEDLIST causes problems when we call the BAPI
BAPI_SALESORDER_CREATEFROMDAT2 and BAPI_SALESORDER_CHANGE (I think
this is due to the fact that these BAPIs belong to the same Function
Group and there must be some common structures that are not cleared
causing us all sorts of grief when we try and call the next BAPI)
DATA: tbl_konv TYPE STANDARD TABLE OF konv WITH HEADER LINE.
DATA: tbl_komv TYPE STANDARD TABLE OF komv WITH HEADER LINE.
DATA: tbl_vbak TYPE STANDARD TABLE OF vbak WITH HEADER LINE.
Pricing Condition Master
DATA: BEGIN OF tbl_t685a OCCURS 0,
kschl LIKE t685a-kschl,
kaend_wrt LIKE t685a-kaend_wrt,
END OF tbl_t685a.
SELECT *
INTO TABLE tbl_vbak
FROM vbak
WHERE vbeln = c_contract.
READ TABLE tbl_vbak INDEX 1.
SELECT *
INTO TABLE tbl_konv
FROM konv
WHERE knumv = tbl_vbak-knumv AND
kposn = c_item.
CHECK sy-subrc EQ 0.
We now need to make sure we only bring across the Condition Types that
are EDITABLE. If we bring across non editable conditions (such as
'ZPR1') the Change Sales Order BAPI will fail
SELECT kschl kaend_wrt
INTO TABLE tbl_t685a
FROM t685a
FOR ALL ENTRIES IN tbl_konv
WHERE kappl EQ 'V' AND "Sales
kschl EQ tbl_konv-kschl AND
kaend_wrt EQ 'X' AND "Value is Editable
kmanu NE 'D'. "Process manually
Prepare for Binary Search
SORT tbl_t685a BY kschl.
LOOP AT tbl_konv.
READ TABLE tbl_t685a WITH KEY kschl = tbl_konv-kschl BINARY SEARCH.
IF sy-subrc EQ 0.
MOVE-CORRESPONDING tbl_konv TO tbl_komv.
APPEND tbl_komv.
ENDIF.
ENDLOOP.
CHECK NOT tbl_komv[] IS INITIAL.
Map KOMV into the more BAPI friendly BAPISDCOND structure
CALL FUNCTION 'MAP_INT_TO_EXT_STRUCTURE'
TABLES
fxvbak = tbl_vbak
fxkomv = tbl_komv
fxbapikomv = tbl_bapisdcond
EXCEPTIONS
entry_missing = 1
OTHERS = 2.
ENDFORM. " get_contract_details
*& Form call_change_sales_ord_bapi
Call the Change Sales Order BAPI
FORM call_change_sales_ord_bapi .
DATA: st_head_chg LIKE bapisdh1x,
st_logic_switch TYPE bapisdls.
CHECK NOT g_vbeln_created IS INITIAL.
CHECK g_valid_contract EQ 'X'.
st_head_chg-updateflag = 'U'.
st_logic_switch-cond_handl = 'X'.
CALL FUNCTION 'BAPI_SALESORDER_CHANGE'
EXPORTING
salesdocument = g_vbeln_created
order_header_inx = st_head_chg
logic_switch = st_logic_switch
TABLES
return = tbl_return_chg
conditions_in = tbl_bapicond
conditions_inx = tbl_bapicondx.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
EXPORTING
wait = 'X'.
ENDFORM. " call_change_sales_ord_bapi
*& Form write_output_report
Produce Output Report
FORM write_output_report .
IF NOT g_vbeln_created IS INITIAL.
WRITE:/ 'Success! Sales Order', g_vbeln_created, 'was created!'.
ELSE.
WRITE:/ 'Failure! Sales Order was not created!'.
ENDIF.
SKIP.
WRITE:/ 'Sales Order Create Log'.
LOOP AT tbl_return.
WRITE:/ tbl_return-type, tbl_return-id, tbl_return-number,
tbl_return-message.
ENDLOOP.
SKIP.
WRITE:/ 'Sales Order Change Log'.
LOOP AT tbl_return_chg.
WRITE:/ tbl_return_chg-type, tbl_return_chg-id,
tbl_return_chg-number, tbl_return_chg-message.
ENDLOOP.
ENDFORM. " write_output_report
*& Form validate_contract
Make sure that the Contract is Valid
FORM validate_contract .
DATA: l_gueen LIKE vbak-gueen,
l_prsdt LIKE vbkd-prsdt.
SELECT SINGLE vbakgueen vbkdprsdt
INTO (l_gueen, l_prsdt)
FROM vbak
INNER JOIN vbkd
ON vbakvbeln = vbkdvbeln
WHERE vbak~vbeln = c_contract AND
vbkd~posnr = '000000'.
IF sy-datum LE l_gueen.
Contract is valid! Set Order Price Date
g_valid_contract = 'X'.
g_cont_price_date = l_prsdt.
ENDIF.
ENDFORM. " validate_contract
Regards
Rajesh Kumar -
BAPI to get Leading Position of Org unit
Hi,
I need a BAPI to get the
Leading Position of Org unit.
I also need the job title for a leading position.
Any suggestions?
regards, AndreHi Andre,
I don't know if a BAPI is available.. but you can copy RH_GET_LEADING_POSITION into a Z version... make it RFC enaled & add code to get the title..
Regards,
Suresh Datti -
Dear experts!
Now, I'm getting some issues about fill parameters for BAPI: BAPI_ACC_STAT_KEY_FIG_POST with t.code 9KE5.
Really, I want to perform the bapi with t.code 9KE5.
Help me, please!
Best regards, Huy!Hi Huy
If you go to SE37 you have to set the following parameters to make it work:
1-For Parameter section, Doc Header you have to set:
CO_AREA 1000
DOCDATE 08.11.2011
POSTGDATE 08.11.2011
VERSION 0
DOC_NO
VARIANT
DOC_HDR_TX
USERNAME X1FREDRA
OBJ_KEY
OBJ_TYPE
OBJ_SYS
VAL_PERIOD 000
VAL_FISYEAR
For table DOC_ITEMS you have to set:
STATKEYFIG BRSAPU
STAT_QTY 10,000
PERSON_NO 00000000
SEG_TEXT
REC_CCTR MS1010
ACTTYPE
REC_ORDER
REC_WBS_EL
RECSALEORD
RECITEM 000000
Then you run and it will post. But there is no profit center line, maybe you have to use the parameter RECCOSTOBJ.
Regards
Fred -
BAPI to get inbound delivery from material serial number
BAPI to get inbound delivery number from material serial number?
input---material serial number.
output--inbound delivery number.Perhaps instead of using a BAPI you can code it like this.
DATA:serial(10) TYPE n VALUE '0000340078',
pos TYPE i VALUE 1.
START-OF-SELECTION.
WHILE pos <= 10 AND serial+pos(1) = 0.
pos = pos + 1.
ENDWHILE.
REPLACE ALL OCCURRENCES OF '0' IN serial(pos) WITH space.
WRITE serial. -
Function, BAPI to get the children form a Network Activity in a Project (PS)
Hi everyone,
I have a Project in TCode CJ20N with PEPs, Networks and all the components that It has.
I'm doing a program which input "Network Activity" and the result have to be all the children for this Network Activity (Material Components) including the information for each Material Component because What I'm looking for is to check if at list one of the children for a Network Aciviti have a Purchase Requisition linked to it as I show in the Attached File.
To do this, I need to execute a function, BAPI, BADI or any code to get the children to look for a PR.
Thanks a Lot.
Regards
Felipe UribeHi Arun...
thanks a lot, I think it could work fine!!!.
I'll try using this BAPI.
Regards
Felipe Uribe -
Hello All,
We have downloaded the Tax jurisdiciton codes from R/3 to CRM.
When a consumer is trying to register(B2C shop) a field called COUNTY(Not Country)(And a refresh button next to it) appears when the consumer chooses to save.
Without maintainig a COUNTY(not a country) the jurisdiction code pertaining to the region is not getting determined for the consumer.
Does any one suggest where can we maintaint the same in IMG?
Thanks in Advance
SastriYou asked ...
Yes the COUNTRY is US and COUNTY is mandatory to determine tax jurisdiction code, where in IMG do we maintain COUNTY (codes).
You said in your first mail
We have downloaded the Tax jurisdiction codes from R/3 to CRM.
If you are using Vertex or Taxware, the jurisdiction codes are checked using that software. The "master data" of the State, County, City, Zipcode come as a part of the tax software. Check if you are using such third-party software. If so, you have maintain the settings for this. But, If you are not using third-party tax software, then you must maintain them yourself.
Look into the definition for Tax jurisdiction code and see how to - Define Structure of Tax Jurisdiction Codes - in IMG - comes under Cross-Application Components --> SAP Business partner --> Business Partner -->Basic Settings --> Tax Jurisdictions.
Here you maintain either tax with SAP software or using third-party. -
County Code and City Code in CRM
Hi Guru,
We are having big issue now. Our CRM is fully integrated with ERP, our user want to have the county code and city code in CRM customer master creation. Seems these two fields are not available in CRM, please advice.
Rgs, MichelleHello Michelle,
IN BP Transaction code if you expand the Addess Tab you will find "City/State/ZIP Code"
Here you will get City code.
You can use ZIP Code to map the Country code.
Regards,
Rajendra Sonawane -
While activating a request in DSO getting error code 10
While activating a request in DSO getting error code 10
Hi All,
I am trying to load data into Billing: Condition Data (0SD_O06) using 2LIS_13_VDKON. First while loading data I am getting error
Record 8778 :InfoObject SOLD_TO does not contain alpa-conforming value 100000 which I changed manually in PSA maintenence and tried to load data again and now I am getting an error (Error 10 in the update) ID:RSAR No119.
I have checked the formula in Transformation and it works fine. Still I am not able to load data.
Please help.
Thanks and regards
Vishal PardeshiCheck the log for the request from the manage screen of the DSO, it will be there next to the monitor button.
Otherwise you can check the error from the monitor screen of the request in Details tab.
Veerendra. -
I've tried everything. Cloud Cleaner, removed all Adobe products from computer, ran in Administrator Deleted everything still get error code 1 noting in all the troubleshoots have helped.
Error Code 1: "Failed to install" | Creative Cloud Desktop :
https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html -
When I try to open Photoshop CS6 I get "Error Code 16"
When I try to open Photoshop CS6 I get "Error Code 16"
I have researched Internet - ADOBE and others - to find a solution, but no luck! (see under)
The problem started around one year ago but I was able to open Bridge and go to Photoshop from there until recently.
Now I get "Error Code 16" in Bridge too when I am trying to go to Photoshop.
I have tried everything I could think of (including creating a new Administrator-user) with help from my Internet research and my own pretty good experience (I started working with computer systems as a Systems Analysts 1968...... - now it is only PCs)
I miss my Photoshop and Bridge a lot - it is very frustrating to have this problem, but I can see I am not the only one!!!
I also have these Adobe products:
Adobe Photoshop
1045-1297-1724-5553-8938-xxxx
Adobe InDesign
1037-1476-0290-3491-8464-xxxx
Adobe Audition
1137-1169-5106-2253-7226-xxxx
Adobe Photoshop
1045-1007-5934-1160-3319-xxxx
Adobe Photoshop Elements
1057-4535-7945-2468-2014-xxxx
and some more.
I am grateful for all help.
/// Björn Andrén - [email protected] (member ID)
=======================================================================
Configuration error 16 when you start a Creative Cloud (CC) or Creative Suite (CS) application
https://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html
========================================================================
Adobe CC/CS6 - Error 16 and no SLStore or PCD File
https://forums.adobe.com/message/7157810
https://forums.adobe.com/thread/1243845?tstart=0
=========================================================================
How to Erase an Adobe Registration File
http://smallbusiness.chron.com/erase-adobe-registration-file-45714.html
=========================================================================
Why can't I open Photoshop CS6? Missing Adobe PCD and SLstore folders!?
https://answers.yahoo.com/question/index?qid=20130608085953AAuWzEA
========================================================================
Issue with getting an Error code '16' if trying to install Adobe Photoshop CS5
http://thedailybuggle.com/forum/issue-getting-error-code-16-if-trying-install-adobe-photos hop-cs5-66.html
========================================================================
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Mon Feb 09 17:24:22 2015] ---------------------------------------------------------
[Mon Feb 09 17:24:22 2015] *=*=*=*=*=*=*=*=* :: Start Session :: *=*=*=*=*=*=*=*=*=*
[Mon Feb 09 17:24:22 2015] ---------------------------------------------------------
[Mon Feb 09 17:24:22 2015] Win OS Version: 6.1
[Mon Feb 09 17:24:22 2015] Cleaner Tool version : 2.0.0.0
[Mon Feb 09 17:24:22 2015] Cleanup source directory : C:\Program Files (x86)\Common Files\Adobe\AdobeCreativeCloudCleanerTool
[Mon Feb 09 17:24:22 2015] [AdobeProgramFiles] : C:\Program Files (x86)\Adobe
[Mon Feb 09 17:24:22 2015] [AdobeProgramFiles_x64] : C:\Program Files\Adobe
[Mon Feb 09 17:24:22 2015] [AdobeCommon] : C:\Program Files (x86)\Common Files\Adobe
[Mon Feb 09 17:24:22 2015] [AdobeCommon_x64] : C:\Program Files\Common Files\Adobe
[Mon Feb 09 17:24:22 2015] [UserRoamingAppData] : C:\Users\BEAR2\AppData\Roaming
[Mon Feb 09 17:24:22 2015] [UserLocalAppData] : C:\Users\BEAR2\AppData\Local
[Mon Feb 09 17:24:22 2015] [StartMenu] : C:\ProgramData\Microsoft\Windows\Start Menu\Programs
[Mon Feb 09 17:24:22 2015] [System32Folder] : C:\Windows\system32
[Mon Feb 09 17:24:22 2015] [SharedApplicationData] : C:\ProgramData
[Mon Feb 09 17:24:28 2015] Language selected: English
[Mon Feb 09 17:24:28 2015] Displaying the Adobe End User License Agreement
ADOBE
Gen_WWCombined-en_US-20121017_1230
[Mon Feb 09 17:24:28 2015] Please enter (y) for Yes or (n) for No. ... >>
[Mon Feb 09 17:24:38 2015] Choose from one of the following options to clean up :
[Mon Feb 09 17:24:38 2015] 1. All
[Mon Feb 09 17:24:38 2015] 2. Adobe Flash Player 10.2
[Mon Feb 09 17:24:38 2015] 3. Creative Cloud 2014 , Creative Cloud & CS6 Products
[Mon Feb 09 17:24:38 2015] 4. Creative Cloud 2014 only
[Mon Feb 09 17:24:38 2015] 5. Creative Cloud only
[Mon Feb 09 17:24:38 2015] 6. CS6 only
[Mon Feb 09 17:24:38 2015] 7. CS5-CS5.5-CS6
[Mon Feb 09 17:24:38 2015] 8. CS5-CS5.5
[Mon Feb 09 17:24:38 2015] 9. CS3, CS4
[Mon Feb 09 17:24:38 2015] 10. Adobe Id credentials
[Mon Feb 09 17:24:38 2015] 11. Quit
[Mon Feb 09 17:24:38 2015] Choice :>
[Mon Feb 09 17:24:44 2015] User selected: CS6 Only
[Mon Feb 09 17:24:44 2015] Executed the command : call copy /Y "C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db" "C:\Program Files (x86)\Common Files\Adobe\backup20150209T172444\pdb.db"
[Mon Feb 09 17:24:44 2015] Executed the command : call copy /Y "C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db" "C:\Program Files (x86)\Common Files\Adobe\backup20150209T172444\Media_db.db"
[Mon Feb 09 17:24:44 2015] Opened DB connection with path: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
[Mon Feb 09 17:24:44 2015] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Mon Feb 09 17:24:44 2015] List of products installed on this machine
[Mon Feb 09 17:24:44 2015] Listing products for cleanup:
[Mon Feb 09 17:24:44 2015] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
[Mon Feb 09 17:25:02 2015] response 1
[Mon Feb 09 17:25:02 2015] Are you sure you want to clean all the listed products and associated files?
[Mon Feb 09 17:25:02 2015] Type (y) to confirm and remove or (n) to quit ... >>
[Mon Feb 09 17:25:07 2015] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
[Mon Feb 09 17:25:07 2015] User selected: 'Clean All'
[Mon Feb 09 17:25:07 2015] *-*-*-*-*-*-* Start removing product : ALL *-*-*-*-*-*-*
[Mon Feb 09 17:25:07 2015] *-*-*-*-*-*-* Finished removing product : ALL *-*-*-*-*-*-*
[Mon Feb 09 17:25:07 2015] Action : Deleting the C:\Program Files (x86)\Common Files\Adobe\backup20150209T172444 folder as there is no product deleted.
[Mon Feb 09 17:25:07 2015] LOG FILE SAVED TO: C:\Users\BEAR2\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
[Mon Feb 09 17:25:07 2015] Adobe Creative Cloud Cleaner Tool completed successfully
[Mon Feb 09 17:25:07 2015]
[Mon Feb 09 17:25:07 2015] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
[Mon Feb 09 17:24:44 2015] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
[Mon Feb 09 17:25:07 2015] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
[Mon Feb 09 17:25:07 2015] ---------------------------------------------------------
[Mon Feb 09 17:25:07 2015] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*
[Mon Feb 09 17:25:07 2015] ---------------------------------------------------------
[Mon Feb 09 17:28:53 2015] ---------------------------------------------------------
[Mon Feb 09 17:28:53 2015] *=*=*=*=*=*=*=*=* :: Start Session :: *=*=*=*=*=*=*=*=*=*
[Mon Feb 09 17:28:53 2015] ---------------------------------------------------------
[Mon Feb 09 17:28:53 2015] Win OS Version: 6.1
[Mon Feb 09 17:28:53 2015] Cleaner Tool version : 2.0.0.0
[Mon Feb 09 17:28:53 2015] Cleanup source directory : C:\Program Files (x86)\Common Files\Adobe\AdobeCreativeCloudCleanerTool
[Mon Feb 09 17:28:53 2015] [AdobeProgramFiles] : C:\Program Files (x86)\Adobe
[Mon Feb 09 17:28:53 2015] [AdobeProgramFiles_x64] : C:\Program Files\Adobe
================================================================================
OS Name Microsoft Windows 7 Professional
Version 6.1.7601 Service Pack 1 Build 7601
Other OS Description Not Available
OS Manufacturer Microsoft Corporation
System Name BEAR-PC
System Manufacturer System manufacturer
System Model System Product Name
System Type x64-based PC
Processor Intel(R) Core(TM) i7-2600K CPU @ 3.40GHz, 3401 Mhz, 4 Core(s), 8 Logical Processor(s)
BIOS Version/Date American Megatrends Inc. 0801, 2011-08-15
SMBIOS Version 2.6
Windows Directory C:\Windows
System Directory C:\Windows\system32
Boot Device \Device\HarddiskVolume1
Locale United States
Hardware Abstraction Layer Version = "6.1.7601.17514"
User Name BEAR-PC\BEAR2
Time Zone Eastern Standard Time
Installed Physical Memory (RAM) 16.0 GB
Total Physical Memory 16.0 GB
Available Physical Memory 12.1 GB
Total Virtual Memory 31.9 GB
Available Virtual Memory 28.1 GB
Page File Space 16.0 GB
Page File C:\pagefile.sysRun the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium
Maybe you are looking for
-
My ITunes gift card I brought, the Reemdem code had bin wide out so I can no longer see that code what do I do?
-
I have a list which has a underlying infopath form for insert and edit a record. The list has various views spread across different pages . Now depending on different pages "New Item", a value for the form will have a corresponding value. If there is
-
How to make guides on a master page more effective
I have a grid of guides on a master page. They are visible in my working pages, but they don't have that "magnetic" quality that I expect - things don't snap to them. I have layers in the master page and layers in my working pages. Can someone help m
-
Contacts shown on ipad facetime won't transfer to my recently restored iphone
My iphone had been playing up of late, and resulted in me having to restore the factory settings, before I could back everything up properly. I'm now left with a basic iphone, and all my contacts etc backed up on my ipad. For some reason these won't
-
Sun VDI 3.0 Patch 3 is now available at SunSolve
Hi folks, we just released a third patch revision for Sun VDI 3.0. The patch binaries are available at SunSolve: [Patch ID 141481-03 (Solaris 10 sparc) |http://sunsolve.sun.com/search/document.do?assetkey=1-21-141481-03-1] [Patch ID 141482-03 (Solari