FM - Period problem while block the Sale Order
We are trying to block sales order by using transaction code VA02 with below error message.
1. Posting in fis yr2009 is not possible in FM open doc 1234 in year2008
2. Document item 1234/00010 has not yet been carried forward to the current year.
The details of screen shot error is given below for reference.
Posting in Fis. Year 2009 is not possible; in FM open doc 0000xxxxx in fis. year 2008
Message no.FMCF102
Diagnosis
It is not possible to change document 00000xxxxx is fiscal year 2009 because the document was updated as open commitment in fiscal year 2008 in Funds Management.
System Response
The posting is not carried out.
Procedure
To change the document
If the fiscal year 2009 is later than 2008
Carry document 00000xxxx forward to fiscal year 2009 using program closing operations: Carry forward of Open Items
If the fiscal year 2009 is earlier than 2008 and document 0000xxxx was carried forward already
Reset the commitment carryforward using program Closing Opeations: Reset Carryforward of Open items
Then you can make the change to document 0000xxxxx.
Can any one guide me how to proceed further - block the sale order.
Thanks in advance
Regards,
SS
Hi,
Apparently, you have PBET regime in your FM update profile and, thus, have to use the same year for the following FM documents. You have to carry-forward your sales order (via FMJ2) to 2009 and only then you will be able to process it.
Regards,
Eli
Similar Messages
-
Quantity problem while creating the sales order
Dear Experts,
Need your inputs for the following case,
the sales order has to accept only quantity 1, if more than 1 qty it has to show error message.
how to control this,as i know not through incompletion log.
Please let us know your valuable suggestions urgently.
Thanks
RajuHi
J Raju
Go to SPRO
Sales and Distribution- --- Sales Documents -- Sales Document Item - -- - Sales Document Item--Select yr sales doc item category view the same there u will find -- general control -- put tick on order qty=1
Hope this will help you.
Thx -
Material Listing Error while creating the sales order
Hi Guru's
I have mantained a material in the lisitng for A002 combiantion for SO/DC/Pric. ref. material
While creating the sales order is throwing an error as material is not listed so the transaction is not possible.
I have done the basic invetingation on the folowing aspects
1)checking the material in the listing
2)Validity periods
3)Material not blcoked
4)Mateial is extened for the respective sales org
Kindly help ASAP.
Thanks & Regards
TarakaramDear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja -
Error while creating the sales order with billing reference
hi alll
i am getting error while creating the sales order with billing reference.The line items are coming in grey.I am not able to change the items as well as the quantity field.Can u guide me
cheers
shalsa007........Dear SAP SD 007
I can confidently tell that an enhancement or an user exit has been applied in your scenario
You have to check that
Normally when creating a sales order with respect or referring billing documents the qty will be in editable mode and it is standard problem
Your people has solved the standard problem by enhancement
Usually OR--LF-PGI----F2 (SAY THE QTY IS 25 UNITS)
Now you are creating returns order with reference to F2 in the return order type Re there is a standard issue that user can edit the qty to 30 from the original 25
To solve this only your people have used userexit
Line items and qty greyed out means definately there is some enhancement or user exit applied
You have to check that
Regards
Raja -
CO-PA document is not created while doing the sale order cycle
Dear Experts,
I have 4 company codes in my controlling area. I did all CO-PA configuration. But CO-PA Document is generated in Only one company code. Remaining company codes CO-PA document is not created while doing the sale order cycle
Ive carried a standard sales cycle that contains sales order (VA01),
and (VF04,VF02). System should generate 4
documents as follows
1) FI Document
2) CO Document
3) Profit Center Accounting Document
4) COPA Document
But in my case for 3 company codes only 3 documents are generated instead of CO-PA. But for one company code 4 documents are generated.
In my case i did all settings Operation concern level and assign to controlling area. I can,t Understood why system is generating CO-PA document for Only one company
Please suggest me where i miss the settings..
Regards,
Krishna.VDear Ajay,
Cost element category is 01. Because hear is one another company they have FI only all transactions they maintain through FI only. so hear we maintain Cost elements category 01.
I think it is not a problem. because hear i got CO-PA document from one company. Remaining 3 company is not generated.
Hear we maintained all gl's chart of acc level and cost elements also.
Please suggest me...
Regards,
Krishna. v -
Can we block the sales order after creating ?
Can we block the sales order after creating ?
If how to do.
Thanks
nareshHi
Naresh
If you want to block the sales order then go to
>Header -- shipping tab
There u will find the column of delivery block there u put any reason. This way u block the sales order.
Another way u can give reason for rejectioon this way also u block the order and as and when u want to desp u can remove the reason/block.
Hope this will help you.
Thx. -
Block the sale order on item level
by default,how to block the sale order on item level?
where do i configure the setting in system?
hhhDear,
Goto the Transaction code MASS and enter the OBJECT TYPE as BUS2032 and Hit enter.
Now in the next screen select the table for SALES ORDER ITEM DATA and in the fileds select billing block mass with field
MASSSDHEAD_S-FAKSK and execute, it will lead to another screen in which you can enter all the Sales documents and execute, there u can assign billing block for all the Items at a time
or
Sit with ABAPer and develop a BDC program (Hardly take 1 hour). This will be for future as well.
Just pass a file having all the sales order number, execute it in background.
When system is providing automatic way then why to go manual?
Please check this and revert back.
Regards
AJIT K SINGH -
Error while saving the Sales Order
Hi experts,
i am getting a runtime error while saving a sales order stating: SAPSQL_EMPTY_TABNAME. It says the field T681-KOTAB could be empty. I would give in more inputs. Someone plz help.
Thanks.I would expect that KOTN521 would be a Database table defined in the ABAP Dictionary that relates to the condition implemented in 521 for the usage specified in that record.
You should be able to go into the info system, SE84, and search under ABAP Dictionary / Database Tables to see what KOTN521 is.
Also, since the only Keys to T681 are KVEWE and KOTABNR, and there are two KOTABNR entries with a value of 521, then there must be two different usages (KVEWE) associated with that table.
If you see what they are, you can check to see what the usages represent. Based on a lookup, it appears that a usage of N is for Free Goods, A is for Pricing etc. In our system, we only have A entries.
What are the usages for the 521 entries? Do they relate to Free Goods/Pricing???
Does the table KOTN521 exist in the ABAP Dictionary?
Answering these questions may get you closer to the answer.
Can you compare the values in these entries to what you have in different SIDs?
Is this problem happening in Production, or is it still in a development or Quality Assurance client?
If it is still in development or Q, then it may be that a recent customization change was made.
Compare the entries across your systems, if possible.
Good luck
Brian -
ERROR WHILE CREATING THE SALES ORDER
Hi,
When creating the sales order i am entering "mode of transport"in TSW details and while trying to save it im getting a message saying "Express document "update was terminated"" recieved from the author "Rahul". If i dont enter the TSW detail while creating i am able to save the order and later in change mode i can enter the mode of transport.
When i check the inbox, it says "definately cannot transfer message to node SMTP due to connection error".
This is hapenning for only one user.
What could be the problem?
Regards,
Rahul.Hi Rahul,
I think you need to enter the mode of transport in external details where it will take for further processing. TSW is different process.
Thanks
Pravin -
Error while changing the sales order
hi,
Thanks in advance.i am trying to change already created sales order in va02.system is throwing an err "the sales document cannot be blocked".my purpose is to create a delivery with reference to this sales order..when i try to create delivery with this same order it gives the err "you cannot block the transaction at the moment".
Thanks
RaksDear friend,
As our friend says check the schedule line first is it confirmed order qty and try delivery before that see if you have any delivery block in order if you don't have any block in sales order, once you get that error double click and see what response you get from performance assistant, see if you could locate the area were u get the problem.
Regards,
Arun. -
Performance issue while saving the sales order
Hi Guys,
I am facing some problem in creation of sales order with 100 line items while i tried to save, it is taking too much of time to save the order. I had taken the trace and found that method Call M." /SAPSLL/CL_CUHD=>GET_OBJECT_PK" is taken 43.9 % of Net value. can any body tell me that what is the purpose of this method..??
CAll : Call M. /SAPSLL/CL_CUHD=>GET_OBJECT_PK
Number : 6,321
Gross: 37,042,153
Net:37,042,153
gross(%) : 43.9%
NET(%):43.9%
Program called: /SAPSLL/CL_CUHD===============CP
<< Moderator message - Please do not promise rewards>>
Thanks in advance..
Mak.
Edited by: Rob Burbank on Jun 2, 2011 9:44 AMplease run the SE30 again, first switch on everything in measurement restrictions including internal tables.
Then measure 3 (!!) times. Do you always get the same time for the gross time? Or is there some variance?
The net time should be reduced because I would assume internal tables to need some or most of the time. If so then I would guess that you have a suboptimal internal table processing, quadartic coding. -
How to block the sales order for not creating requirement
Dear All,
My client want that whenever a sales order is raise, that should not go create requirement for production unless until account department check whether the prices etc are correctly put or not
how can i do this
thanksI suggest you can try to use the functionality of Status Profile.
Create one Status Profile with 2 line items-
1: First line : Pricing Approval or PR and check what all you want to block if this status is assigned to the order type.
2: Second line : Released and check what all you want to be released once the Approval is done.
So by default the status profile - Pricing Approval will be assigned to the Sales Order during order creation. Then after your accounts department check the pricing and approves , they can change the status to Released and the order can be processed further.
Regards
Sai -
Different message in va01: Defect in ECC6 server while saving the sales order .
Hi ABAP gurus,
I am in to upgrade Project In ECC6 server I am getting the different message when saving the sales order in va01 compare to old sever(4.7) .
I have to make it to the same message as it is in the 4.7 server.
plz help me .
Regards,
vanamaala kashavenaHi,
IF xvbap-uepos IS INITIAL AND
xvbap-zzhrs_conf <> 'X'.
MESSAGE ID 'ZOTC' TYPE 'E' NUMBER '067' WITH
'Please select Hours Confirmed in Additional data B'(302) 'for item'(303) xvbap-posnr.
ENDIF.
this is the code in the PARTICULAR INCLUDE PROGRAM .
this is same in both the system ,but in ecc6 server,in message
popup it is not giving 'Please select Hours Confirmed in Additional data B' .
it is giving ORDER QTY FORMAT PERIOD (ITEM NUMBER(0010))
Regards,
vanamaala k -
Send Mail to Customer while saving the Sales Order
Dear Friends,
My Requirment is to send the mail to Customer automaticaly when create any Sales Order.
While sending the mail given three points reqired.
1. Send the attachment of Order Conformation along with the mail.
2. There must be The title text as "Order Confirmation refrence of your PO <Customer PO No> <PO Date>"
3. There must be some body text like some terms and conditions with variables of Order data.
Can any body help me one this step by step.
Kindly suggest me how to do this.
Thanks in Advance.
D Tarun Kumar
Moderator message : Spec dumping not allowed, duplicate post. Thread locked.
Edited by: Vinod Kumar on Jul 12, 2011 11:30 AMWhile saving the sales order through Va01 and Va02 and email has to send
-
While saving the sales order through Va01 and Va02 and email has to send
Hi Experts,
My requirement is to send an email with PDF formatted display of the Sales order to the sold to party's email id while saving the Salesorder through Va01 and Va02.
I need the following .
How to send an email with PDF formatted attachment of Salesorder display ? (we have done the formatting of display through SMARTFORMS )
I think we can do it by userexits program name is MV45AFZZ while saving the document.
Please suggest me the best possible way.
Thanks ,
SarithaHi, there is no need for a customer devlopment on this. A standard smartform output will do with output medium '5' (external send). Then the smartform output will be send as PDF to the e-mail address in the output partner. Have a look at transaction NACE.
Regards Jack
Maybe you are looking for
-
I am a teacher and use my personal ipad to teach in my class. My school has set up a separate itunes account for teachers to download shows for use in class. How do i download from a different itunes account than i use personally?
-
How to connect to a 2006 macbook?
seems like this would be simple. but the only physical connection seemingly possible between a 2006 macbook and the 2011 imac is an ethernet cable. I started transfering user to the new mac, but said it would take 42 hours. I found an old backup hard
-
Java.lang.OutOfMemoryError: PermGen space - help pl
Hello I am getting this error when i run the servlet... 2005-05-16 21:10:11 StandardWrapperValve[server_flt]: Servlet.service() for servlet server_flt threw exception java.lang.OutOfMemoryError: PermGen space What causes this exception and how do you
-
I need to set a alarm for school but I have no idea, it's not like they have the clock app like iOS 4 did! Please help
-
When I lock my iPhone 5c, the clock stops running.
Hi. I have a Green iPhone 5c (GSM). Every time I lock the phone, it - without fail - stops keeping time. The clock just stops. Also, my WiFi and Bluetooth crash, and "flicker" often. Thanks, Will.