FM to fetch BUOM and PUOM for catcha weight materials

Hi,
Any body know the FMs to fetch BUOM(Base unit of measure) Quantity and PUOM(Parllel unit of measure) quantity.
Please pass it to me.
Thanks in advance,
Sada

Hi,
BUOM is the Unit of measure in which stocks of the material are managed and it is also called as stock keeping unit.
Order unit is the unit of measure in which u r going to place the order.In sales,it is called as sales unit.In purchasing,it is purchasing unit.You need to maintain alternate unit of conversion if you are maintaing these order units.
In your case wt unit in basic data 1 is the unit of the gross wt maintained.If u want maintain any wt in under dimensions of the material,you have to define wt unit.For this no necessary to maintain alternate unit of measure
Hope it helps

Similar Messages

Difference between open,fetch,close and a for loop

Is there much difference in looping a query using fetch loop or a for loop?
Example:
For x in (select * from ....) loop
end loop;
and
OPEN c_cursor;
LOOP
FETCH c_cursor INTO myVar;
EXIT WHEN c_cursor%NOTFOUND;
END LOOP;
close c_cursor;
Let's say we have a few thousand users using a function that uses this code. Would you see much difference in speed? Suppose i forget to close the cursor in the second example. Will that be a major issue if we have a very large userbase or with oracle close the cursor themself after a while? The cursor wont lock the record, right? So even if we forget to close the cursor we won't get a deadlock i suppose. Only if we declare the cursor for update but that's not the case.

simple test case to prove the point
SQL> create or replace function myFunc return number
2 is
3     cursor mycursor
4     is
5     select * from dual;
6
7     myvar dual.dummy%type;
8 Begin
9     open myCursor;
10
11     fetch myCursor into myVar;
12
13
14     if myCursor%found
15     then
16
17             return 1;
18     else
19             return 0;
20     end if;
21
22
23     close myCursor;
24 end;
25 /
Function created.
SQL> show parameter open_cursor
NAME                                 TYPE        VALUE
open_cursors                         integer     300
SQL>
SQL> select myfunc from dual connect by level <= 350
2 /
    MYFUNC
         1
         1
         1
         1
         1
         1
         1
         1
         1
         1
         1
350 rows selected.
SQL>See i dont hit any error

How to format to show pounds (lbs) and stone, for UK weight?

As the title suggests, I want to have a weight loss table, to show the date in one column, and my weight in another. I know there is already a template available in Numbers '09, but it does not display the weight in the format I am used to- ie pounds and stone. As this system is awkward (14 lbs in 1 stone) I am not sure if there is a way to display it AND display that information correctly on a chart in the same spreadsheet.
Any ideas?

Actually I have just made my table work very well with my chart, which shows the amount of the D column (which is the total sum of (Stones*14)+Pounds). However, when I proceed to hide column D, the chart loses its data and doesn't show the bars based on that data anymore. It only shows the bars when I have the D column unhidden. Is there a way for the chart to work with hidden columns?
EDIT: Never mind. Still learning, and just found the option in the Chart Inspector to show hidden data

Catch Weight Management UD

Hi gurus.
I'm trying to post stock to unrestricted from giving usage decision to various inspection lots, but I simply can't. When I try to save the UD, the next message appears:
Material 100003 is not a catch weight material
Message no. /CWM/MD009
There are catch weight materials and non catch weight as well, does this mean that I can't have QM inspections in all material types? There wasn't any problem with creation of inspection plan or inspection setup at any moment.
Thanks in advance for you help.
Arturo

1)It happens with status
INSP RREC SPRQ
and
REL CALC SPRQ
2)The quantity in QA02 is 300 UN.
The quantity to post in unrestricted is also 300 UN.
We just found the note 1490528:
"When determining conversion factors using alternative units of measure from
the material master, the system does not take into account that Catch
Weight Management (CWM) is activated. As a result, following the processing
of the load file, there are times when you may receive the message
/CWM/MD009 "Material _ is not a catch weight Material."."
I'll let you know if this helped.
Greetings.

MDX to fetch record from 1st of current month to 5th of next month and same for previous year

In my date dimension I have a attribute CalendarDate. I do have a hierarchy [Date].[Year].[Quarter].[Month].[CalendarDate] as well. I need to fetch data starting from 1st working day of current month to 5th working day of next month by MDX. I do have a attribute
to filter working day as IsWorkingDay. How can we get a dynamic MDX that will find the current month first and than it will filter the record from 1st working day of current month to 5th working day of next month. And same for the previous year same month
to compare.
Thanks in advance!
Palash

Hi P,
You can use a calculated member to dynamically add all the days in the current month and the first 5 in the following month. You will need to change measure, cube and hierarchy names.
with member measures.ThisMonthAnd5 as
sum([Date].[Year].parent.children,Measures.[Sales])
+sum(Head([Date].[Year].parent.nextmember.children,5),Measures.[Sales])
select
{Measures.[Sales]
,Measures.ThisMonthAnd5
} on 0,
non empty [Date].[Year].[CalendarDate]
on 1
from MyCube
Richard

How the data is fetched from the cube for reporting - with and without BIA

hi all,
I need to understand the below scenario:(as to how the data is fetched from the cube for reporting)
I have a query, on a multiprovider connected to cubes say A and B. A is on BIA index, B is not. There are no aggregates created on both the cubes.
CASE 1: I have taken RSRT stats with BIA on, in aggregation layer it says
Basic InfoProvider     *****Table type      ***** Viewed at      ***** Records, Selected     *****Records, Transported
Cube A     ***** blank ***** 0.624305      ***** 8,087,502      ***** 2,011
Cube B     ***** E ***** 42.002653 ***** 1,669,126      ***** 6
Cube B     ***** F ***** 98.696442 ***** 2,426,006 ***** 6
CASE 2:I have taken the RSRT stats, disabling the BIA index, in aggregation layer it says:
Basic InfoProvider     *****Table Type     *****Viewed at     *****Records, Selected     *****Records, Transported
Cube B     *****E     *****46.620825     ****1,669,126****     6
Cube B     *****F     ****106.148337****     2,426,030*****     6
Cube A     *****E     *****61.939073     *****3,794,113     *****3,499
Cube A     *****F     ****90.721171****     4,293,420     *****5,584
now my question is why is here a huge difference in the number of records transported for cube A when compared to case 1. The input criteria for both the cases are the same and the result output is matching. There is no change in the number of records selected for cube A in both cases.It is 8,087,502 in both cases.
Can someone pls clarify on this difference in records being selected.

Hi,
yes, Vitaliy could be guess right. Please check if FEMS compression is enabled (note 1308274).
What you can do to get more details about the selection is to activate the execurtion plan SQL/BWA queries in data manager. You can also activate the trace functions for BWA in RSRT. So you need to know how both queries select its data.
Regards,
Jens

IPhone 4S Battery Life: Best solutions and procedures for 1st time user: 1-Do you have a battery life issue (learn first what the usage time spec is about) 2-What can you try to remedy the situation without reading 500 pages of posts

What follows is a grouping of some of the most fruitful procedures - from what I've seen in the biggest battery life issue thread - and some background information and discussion for solving or improving the battery life with the iPhone 4S and may be applicable also to devices on which iOS 5.0/5.0.1 has been applied. Credit goes to the respective users who contributed this information to the forum and they should be commended for doing so. This is not a final listing. The goal here is to provide a first stop sort of knowledge base document for newcomers instead of having them perusing the never ending threads where the wheel is reinvented on every page...
Please don't post your questions, usage screenshots, or claims that it worked or not for you or anything here except PROCEDURES/DEBUG STEPS/SOLUTIONS or improvements to the procedures already listed here. Try to use point form and to be as concise and clear as possible. Hope all this helps.
Thank you and good luck!
General info and specs
First, take a look Apple's battery tips, info and specs(obligatory reading for all Iphone 4S users - read it once and for all):
http://www.apple.com/batteries/iphone.html
http://www.apple.com/batteries/
... you didn't read it? loll Always remember this i.e. the definition of "usage":
Usage: Amount of time iPhone has been awake and in use since the last full charge. The phone is awake when you’re on a call, using email, listening to music, browsing the web, or sending and receiving text messages, or during certain background tasks such as auto-checking email.
I'm still not convinced you read the links so here's what Apple has to say in terms of fine tuning your battery life:
Optimize your settings
Depending on how they are configured, a few features may decrease your iPhone battery life. For example, the frequency with which you retrieve email and the number of email accounts you auto-check can both affect battery life. The tips below apply to an iPhone running iOS 5.0 or later and may help extend your battery life.
Minimize use of location services: Applications that actively use location services such as Maps may reduce battery life. To disable location services, go to Settings > General > Location Services or use location services only when needed.
Turn off push notifications: Some applications from the App Store use the Apple Push Notification service to alert you of new data. Applications that extensively rely on push notifications (such as instant messaging applications) may impact battery life. To disable push notifications, go to Settings > Notifications and set Notifications to Off. Note that this does not prevent new data from being received when the application is opened. Also, the Notifications setting will not be visible if you do not have any applications installed that support push notifications.
Fetch new data less frequently: Applications such as Mail can be set to fetch data wirelessly at specific intervals. The more frequently email or other data is fetched, the quicker your battery may drain. To fetch new data manually, from the Home screen choose Settings > Mail, Contacts, Calendars > Fetch New Data and tap Manually. To increase the fetch interval, go to Settings > Mail, Contacts, Calendars > Fetch New Data and tap Hourly. Note that this is a global setting and applies to all applications that do not support push services.
Turn off push mail: If you have a push mail account such as Yahoo! or Microsoft Exchange, turn off push when you don’t need it. Go to Settings > Mail, Contacts, Calendars > Fetch New Data and set Push to Off. Messages sent to your push email accounts will now be received on your phone based on the global Fetch setting rather than as they arrive.
Auto-check fewer email accounts: You can save power by checking fewer email accounts. This can be accomplished by turning off an email account or by deleting it. To turn off an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and set Account to Off. To remove an account, go to Settings > Mail, Contacts, Calendars, choose an email account, and tap Delete Account.
Turn off Wi-Fi: If you rarely use Wi-Fi, you can turn it off to save power. Go to Settings > Wi-Fi and set Wi-Fi to Off. Note that if you frequently use your iPhone to browse the web, battery life may be improved by using Wi-Fi instead of cellular data networks.
Turn off Bluetooth: If you rarely use a Bluetooth headset or car kit, you can turn off Bluetooth to save power. Go to Settings > General > Bluetooth and set Bluetooth to Off.
Use Airplane Mode in low- or no-coverage areas: Because your iPhone always tries to maintain a connection with the cellular network, it may use more power in low- or no-coverage areas. Turning on Airplane Mode can increase battery life in these situations; however, you will be unable to make or receive calls. To turn on Airplane Mode, go to Settings and set Airplane Mode to On.
Adjust brightness: Dimming the screen is another way to extend battery life. Go to Settings > Brightness and drag the slider to the left to lower the default screen brightness. In addition, turning on Auto-Brightness allows the screen to adjust its brightness based on current lighting conditions. Go to Settings > Brightness and set Auto-Brightness to On.
Turn off EQ: Applying an equalizer setting to song playback on your iPhone can decrease battery life. To turn EQ off, go to Settings > iPod > EQ and tap Off. Note that if you’ve added EQ to songs directly in iTunes, you’ll need to set EQ on iPhone to Flat in order to have the same effect as Off because iPhone keeps your iTunes settings intact. Go to Settings > iPod > EQ and tap Flat.
Usage specs for the 4S - http://www.apple.com/iphone/specs.html:
Talk time: Up to 8 hours (12.5% per hour drain) on 3G, up to 14 hours (7.1% per hour drain) on 2G (GSM)
Standby time: Up to 200 hours (0.5% per hour drain)
Internet use: Up to 6 hours on 3G (16.6% per hour drain), up to 9 hours (11.1% per hour drain) on Wi-Fi
Video playback: Up to 10 hours (10% per hour drain)
Audio playback: Up to 40 hours (2.5% per hour drain)
So a scenario of normal usage could be for example: 4 heavy hours of 3G internet browsing (66.4%), with one hour of call on 3G (12.5%) and 22 hours of standby (11%) = 100%
A battery life issue is a problem where the drain is really out of spec either during usage or standby or both. For example, multi-% per minute drain during usage or a 10% drain per hour during standby is problematic. Browsing the internet on 3G during one hour and losing 16-17% is not.
Apple's test methodology for claiming the specs:
http://www.apple.com/iphone/battery.html
Procedures
davidch tips (reset+full discharge recharge):
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (tilll it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
In my experience this improves the Standby battery drain issue significantly in most cases. It reduces drain from 2-4% or more per hr to 0.5% or less. It has worked for many, many users now. If it does not work after a few try's you may have a real battery or hardware issue and should contact Apple. Good Luck!
ram130's variant of davidch i.e. additional steps:
Now using davidch original steps and attaching the tweaks I made to get me more usage. As shown on page 29.
Go through these steps to address the battery after updating to iOS 5.0.1:
1. Reset all settings (settings app-> general-> reset)
2. Go through initial setup steps (lang, wifi, siri, enable location, etc) and choose setup as new phone (don't worry your apps, data, contacts, mail will still be there). Do NOT restore from iCloud or iTunes (It can copy back corrupt settings)
3. Turn off system location services timezone and iAd
4. Fully discharge battery (till it shuts off with the spinning wheel)
5. Fully recharge battery (overnight if possible)
6. Disable Siri 'Raise To Speak' and REBOOT *( if possible use another camera to verify the                 infrared is off after the reboot).
7. Set emails, icloud and calendars to fetch. ** test. Mines on hourly.
8. If your in a no signal and your phone is saying "Searching..." even after 10mins, reboot while in that area and after 1-2min it should say "No Service". This mainly applies to Verizon customers and improve battery life in these areas.
9. *optional* Goto Settings > General > Network and you will see "Hotspot.." loading something, wait a few seconds and it should say "setup personal hotspot" then exit out.
* I notice a great improvement after disabling this and rebooting. This increased my "screen on" usage or at least helped it. Make the change.
** I have not tested push yet to narrow down the drain but I had this change on my phone. I believe exchange push is responsible for some stand by drain. As for icloud, haven't notice much of a difference. Just try it for a day. My email still came in fast most times. Again still testing, will report back on these..
buxbuster tips(wifi sync, iCloud):
These are my own tested workarounds that worked for my iPhone 4S and seemed to have worked for others as well :
Workaround number 1. Deselect wifi-sync in iTunes and press sync.
If that doesn't work try :
Workaround number 2 : Remove iCloud, reset network settings. ( I guess this won't work for you since you don't have it enabled ).
If both workarounds fail, you can always try to completely wipe your phone. That also solved some of the cases out there.
rolandomerida tips - i.e. buxbuster and additional steps:
Finally, I solved the syncing error loop. My contacts are syncing flawessly again between my devices and iCloud, and yes, the battery stopped draining, which is the main topic here.
I followed instructions from buxbuster (check his workaround a few pages up!) and an additional BIG step to restore contacts and syncing, as seen in a MacRumors forum.
This is what I did:
1. Make a backup of your Address Book, using the vCard option (or both, it doesn't hurt). Save it for later.
2. In your iPhone, delete iCloud account. When it asks, accept both: delete AND delete from my iPhone.
3. Reset network settings. The iPhone will restart, then will ask you to unlock the SIM card.
4.Turn Wi-Fi on.
5. Add the iCloud account again.
That's for Buxbuster's workaround. For some, it might work just like that. My iPhone repopulated from iCloud after step 5, but I still had that "server error" on iCloud. I had to do some extra steps, since my Mac was not syncing to iCloud and couldn't edit anything on my Mac or iCloud. Syncing back had to be fixed, too. If not, the syncing loop would continue from my iPhone, and the battery would drain awfully again.
1. In System Preferences -> iCloud, I turned Contacts off. I chose "keep on My Mac" those contacts, but I got an empty Address Book after a while. And a few minutes later, iCloud contacts were empty and my iPhone also. It is scary at first! Now, before importing that vCard backup...
2. Turn Wi-Fi off. This is important, since your contact-empty iCloud will attempt to wipe your Address Book from your Mac in seconds after importing.
3. Import your vCard backup to Address Book. Just drag it to your blank Address Book window; it asks if you want to import "x" number of cards. Of course, say yes.
4. Turn Wi-Fi on, and then iCloud contacts on again (System Preferences -> iCloud). It will offer to merge your newly populated Address Book with iCloud (which is empty at this point). It should upload every single contact to iCloud, and then to your iDevices. If not, a fifth step would be to import the vCard file to iCloud, but it shouldn't be necessary.
So, with iCloud syncing working correctly, there is no battery draining! Again, that was my particular issue.
I can't tell if this is the single answer to the widely spread battery draining problem, but it sure can be fixed with these workarounds, and yes, Apple should address the problem with a future update, for we affected customers don't need workarounds in the first place
This is the MacRumors discussion:
http://forums.macrumors.com/showthread.php?t=1256807
And dont' forget to check buxbuster's fix, video, and THANK him!
Miless tips (full 800mb release of 5.0.1 and sanitizing a restore):
As for 4S battery life. Try doing this,
1. Settings>Location Service ... disable all location services you do not need. In particularly Facebook because it drains the battery a lot.
Scroll down to the bottom at Settings>Location services>System Services ... Disable Setting Time zone, location based iAds, Diagnostic & Usage.
2. Settings>Notification>Calendar ... turn off the Notification Centre.
3. Settings>General>Reset ... do Reset All Settings. Doing this will not wipe out your iPhone. It will just Reset the network settings, location warning, keyboard dictionary, etc... but it will clear up some corrupted data there. Generally this will help.
Try these 3 steps first... if it still drains a lot, try the following,
4. Drain your battery down to 1%. Then charge it up using USB from PC ... not the charger. The charger output 1.0 A ( x 5V from USB ... you get 5W power). From PC, output is only 0.5A x 5V = 2.5W power. Charging is slower but trickle charge 4S helps the battery retain its charge better. I think it takes about 3-3.5 hours to charge full from USB/PC compared to slightly below 2 hours using iPhone charger.
If after doing the above still could not solve your battery issues (mine with iOS 5.0 was ok up to step 4, but not iOS 5.0.1).... plug you iPhone to a charger (any charger), from iPhone, access your iCloud ... set it up if you havent. Back up your iPhone data to iCloud. if you do not have enough storage (only 5GB is free), go to details and select the apps you need its data backup, choose only those you really need and leave those unnecessary ones out. Back up your camera roll to your PC/Mac manually as it could be too big to backup to iCloud.... once you have it setup, make sure you are on Wifi ... tap backup to iCloud from your iPhone. It will take a while if the file is huge.
Once backup to iCloud is completed, plug your iPhone to PC/Mac and launch iTunes 10.5.1 (make sure you have 10.5.1)
Click Restore. It will automatically initiate a download of iOS 5.0.1 ipsw for iPhone 4S. Wait for the whole process to finish, ie. download, restore software/firmware.
Once its done, do not set up your iPhone from iTunes. Set it up on your iPhone. Go through the selection. When prompted, select restore from iCloud (from your iphone backup earlier). Keep your iphone plugged into iTunes while restoring backup from iCloud. Because while restoring from iClouds, some data will be synced from iTunes if you plug in, e.g. music, video, etc... unless you bought these content from iTunes store. Apps will be downloaded from App Store from the cloud.
Once it's all done restored. Turn off your iPhone,.. and turn it on again.
Now, hopefully your battery wont be draining so fast anymore. Usually it wont after this. But you need to charge your battery at least 4-5 cycles to stabilize the charge on the battery. I dont know why... but battery life seems to get better and better for me after a few charge cycles after all the above work.
Good luck. Let us know if it works for you.
W. Raider tips (Sirii):
Bottom line for me of things that helped battery life are:
1. Turing off Siri and Rebooting the phone by holding the Home button and Top button down, ignoring the slider, until the phone shut down. (turn off Siri, reboot, and check top front of iPhone 4S against a lesser camera like the front-facing camera on an iPad2 - making sure the IR sensor is off)
2. Fully draining the battery, meaning using the phone until it shuts itself off from a drained battery and then recharging it to 100% about 4, maybe 5 times. I charged it both with a Mac and a wall charger.
Hope this is helpful!
Comments
jmm514 remarks (Twitter):
I may have found something. I had Twitter disabled in my notifications, but got a tweet today that popped up on my home screen. Didn't know I had this enabled. At the bottom of the Twitter notification settings is the home scrren toggle. Since disabling this, battery life seems better. Considering there is no setting for frequency of checking for tweets, it appears the phone is continually connecting to wifi to check for new tweets.
tmksnyder comments (notifications, corrupt data in iCloud):
For me, I found my iphone on wifi mysteriously connecting to my mac. I eventually narrowed it down to the Apple Move Trailers app which keeps a file in iCloud. The phone was trying to sync the file with the mac in the background even when the Movie Trailers app was closed (hitting the red x). Based on my macosx logs the iCloud process that was trying to sync was working directly between the phone and the mac without using itunes by connecting to an https address hosted on the phone. It was connecting every 3 minutes and failing (while phone was awake or awake during during a notification). I also found that iCloud control panel on OSX would error if I tried to delete the file. I fixed it by removing the App and doing a hard reset which stopped the sync. I probably could have turned off iCloud document sync in the phone but didn't think of that. My battery life has greatly improved while at home on wifi.    I am now at 28 hrs standby, 2 hrs 20 minutes of usage, and 68% battery. It was ok before where I could get 20-30 hrs standby and 6 -8 hrs usage. My usage today was phone calls, 3g surfing, and music via bluetooth in the car.
I also found even with Itunes iMatch, if I mass updated tages, art work etc, it would hit the phone on wifi even in standby. I was amazed.   Granted if I am not doing updates, Match won't hot the phone so this was a once in awhile event. I could drop my percentage by 5-10% in a matter of minutes when doing updates.   I think a lot of our problems are background processes, associated with iCloud, notification, and apps. More features means more battery.   I think the key thing is to keep track of what has recently been added or changed if battery life gets worse all of a sudden.   It may be an app that was recently installed and if possible you may want to completely remove it and not just quit it.
With twitter, i think it uses push notifications so it doesn't need to be running and actively poll on the phone. For instance , if i quit the mail app, i still will get mail notifications and can swipe the message and load mail. Apple Push Notifications servics maintain the connection to the phone and there are likely pings or connection checks that occur for the service on an os level not an app level. This minimizes the load so there arent a bunch of apps all runing and constantly checking. The notification service , if it is contacted from twitter or another service with data, will check the settings you have registered to the with the apple push service and send the notification to your phone. No matter what, there is a drain with notifications. M hunch is once one application is configured to receive notifications, connection checking occurs betwen the push service and the phone so it knows where it is on the network. If it is implemented correctly, these checks arent frequent if you are still and more frequent as you move. The other drain is for when the noification hits and is processsed. If i get 9 emails over night, my screen just popped up for 20 seconds or so to process each message using battery. I would even think that just go from low power to turning n the screen uses more juice than if the device was already on and i get the message. On nights I get no notifications, I see a 3 or 4 percent drop. On nights with a number of notifications, i have seen up to a 10 percent drop. Besides notifications, wifi sync and icloud will poll on the local network and use up battery if the host computer is on and running itunes or trying to sync a data file that is corrupt (which i had with the apple movie trailers app causing my phone to drain). For me turning off wifi sync and remving a corrupt file in icloud solved my battery issues and I get over 24 hrs of standby with 6 to 9 hrs of use and this is with all the normal location services and push serivices turned on.
See http://developer.apple.com/library/mac/ipad/#documentation/NetworkingInternet/Co nceptual/RemoteNotificationsPG/ApplePushService/ApplePushService.html for more info. I think it has a good overview of how the notifications work.

Well seems like that rumor of iOS 5.0.1 is finally gone the way of the dogs since developers got a beta of 5.1. So as stated earlier in the master discussion-> I suspect if you are filling up this thread with false post or creating a master set of links to various post that are unreliable you are wasting your time. Press is not going to touch the story due to poor or inaccurate sources which may be links from the master thread. This can include inaccurate information, combination of conflicting post or postings from users which may not own the device. Reputable press organizations have policies that require discloser and strict rules about what is a reliable source for a story. It is clear that many of the post in the master thread, which are links presented here are questionable.
Sorry to say that postings taken without any analysis of their totality have been propagated via various sites, for example sites such as http://www.2012federalbudget(dot)com. (Do not visit but I suspect that this is not the 2012 federal-budget site you would expect based on analysis of the records. There are plenty of sites like http://www.2012federalbudget(dot)com propagating questionable post in these threads.) One site for example in the discussion thread used a self signed certificate, the site had a log in to allow users to enter their OpenID. Seems many of these sites are pop and drop drupel configurations.
So remember this is how the really bad rumor of iOS 5.0.2 got started, the 5.1 memory leak issue, iCloud Issues, call quality, address book, etc.
Some of the postings have been very comical, I think the latest now is a dropbox issue. Seems that the length of the previous thread has resulted in various app engines of some proxy servers/tools reaching their limits.
So I would make sure to know the source of any information you link to. Make sure you avoid entering any information to outside links such as OpenID or Apple ID, these are big prize items for anyone with malicious intent. If you have issues and are a valid user contact APPLE CARE. (Note link is using McAfee Secure Short URL Service, and is https.)
http://mcaf.ee/ricdt
The original solution still represents a high level of success for users having any battery issues.
Install 5.0.1 on your iPhone 4s. Some users posting they are still using older versions, bad fake serial numbers, etc.
Make sure your device can run iOS 5.0.1 and is not altered.
Make sure you use a new Sim, not some cut down version which many users admit to doing. (Again, worth confirming what people are posting.)
Reset the device doing a hard reset and software reset.
Let battery drain and then charge for the full cycle, which is 24 hours.
I think you will find you will get the battery usage that APPLE has stated for the device.
Best of luck, stay safe and thanks

Sales text and config for a material

Hi,
I need to know on which table are the maintained Sales text, languages and configuration for a material are stored on R/3
Thanks for any comments
Kamran

Hi vahed kamran,
As said by Aparna, the text are stored in table STXH. we need to fetch them by using the fields
TDOBJECT     Texts: Application Object
TDNAME             Name
TDID             Text ID
TDSPRAS             Language Key
we can use READ_TEXT Function module to get the text.
For Example
CALL FUNCTION 'READ_TEXT'
EXPORTING
       ID = '0001'
       LANGUAGE = 'E'
       NAME = XNAME
       OBJECT = 'VBBP'
TABLES
       LINES = i_XTLINE
EXCEPTIONS
      ID = 1
      LANGUAGE = 2
      NAME = 3
      NOT_FOUND = 4
     OBJECT = 5
    REFERENCE_CHECK = 6.
Best regards,
raam

Fetching month and year from CV of Time dim

Hi,
I am working on BPC 7 MS version, SP3. I need to fetch Month and Year values from my Current View (i.e., %TIME_SET%) .... and if the month is AUG and year is Current I then want a logic to run... Is this possible??
I have written the following code, and only if i hardcode the time (WHEN TIME IS 2009.AUG) the logic seems to work. But I want it to be dynamic
*XDIM_MEMBERSET ACCOUNT=INC_REC_IN_AD
*XDIM_MEMBERSET TIME=%YEAR%.AUG,%TIME_SET%
*XDIM_MEMBERSET CATEGORY=ACTUAL
*WHEN ACCOUNT
*IS *
*WHEN TIME.MONTHNUM
*IS 8
*FOR %YEAR%=%TIME_SET%.YEAR
*FOR %MONTH%=AUG,SEP,OCT,NOV,DEC
*REC(FACTOR=1/5,TIME="%YEAR%.%MONTH%",ACCOUNT="TEMPSTUDYEDU")
*NEXT
*NEXT
*ENDWHEN
*ENDWHEN
*COMMIT
Thanks,
Prasanth.

I think your formula is correc the %YEAR% is not a valid, Can you trap that and see what is being passed, you may also try to split the year out of %TIME%
hope it helps.

Exchange account verified and configured for sync, but no messages show up

I think I'm having what appears to be, based on my reading of the threads on problems with Exchange set-up, a unique problem. Wondering if anyone else is in the same boat and has advice.
I am able to verify and configure my Exchange mail account for sync (using my company's OWA server), but when I go into the mail application I see only my mail folders. The e-mails themselves do not appear. When I tap on a folder to access the messages inside I get a blank screen and a "connecting" message on the bottom.
When I have SSL on, the phone continually prompts me for my password and no matter how many times I enter the correct password it tells me it's wrong. I later get a message that mail cannot be accessed or sent because the "username or password" for the account is incorrect.
When I turn SSL off, I don't get the password prompt, but my messages still don't appear. The phone goes through the whole "connecting" cycle and then says "updated" but there are no e-mails visible and I cannot send.
I was able to set up the account as IMAP but this requires fetching messages and I really want to be able to configure push using Exchange ActiveSync. The company that runs our work email server (we are a small business and don't house the server internally) says it has other iPhones up and running using ActiveSync and the same information I've entered, so they're stumped as to what the problem is.
Please help!!!
Thanks in advance.

Justin - try this
For those of you experiencing problems using OWA through Exchange on iPhone, I may have found a solution. Symptoms I had and have read about -
1. You enter all your account information on iPhone (webmail.company.com, user name p-word, etc)
2. You can see only your folders on iPhone but with no emails inside them
3. you keep getting asked for your password on iPhone over and over
Maddening to get so close to only see folders. I fixed mine and the answer was right in front of my face the whole time. Before entering username and password on iPhone, the format of how it's supposed to be is ghosted - Domain\Name
When I was having the "folders only" issue I had username set up as Domain/Name
Turns out the slash is the difference, for me anyway. As soon I changed from front slash to back slash, entered my password (once) all my folders populated with emails. A miracle !
So to recap, here's my setup
Email - [email protected]
Server - [email protected]
Username - companyorg\name
Password - normal outlook password
Description - My Email Account
Use SSL - ON
I know there are many variations with Exchange and OWA depending on server setup, but the moral my story is back slash instead of front slash in the Domain\username field

Performance on Select Single&Write AND Select*(For All Entries)&Read&Write

Hi Experts,
I got a code review problem & we are in a argument.
I need the best performance code out of this two codes. I have tested this both on 5 & 1000 & 3000 & 100,000 & 180,000 records.
But still, I just need a second opinion of experts.
TYPES : BEGIN OF ty_account,
        saknr   TYPE   skat-saknr,
        END OF ty_account.
DATA : g_txt50      TYPE skat-txt50.
DATA : g_it_skat    TYPE TABLE OF skat,       g_wa_skat    LIKE LINE OF g_it_skat.
DATA : g_it_account TYPE TABLE OF ty_account, g_wa_account LIKE LINE OF g_it_account.
Code 1.
SELECT saknr INTO TABLE g_it_account FROM skat.
LOOP AT g_it_account INTO g_wa_account.
SELECT SINGLE txt50 INTO g_txt50 FROM skat
    WHERE spras = 'E'
      AND ktopl = 'XXXX'
      AND saknr = g_wa_account-saknr.
WRITE :/ g_wa_account-saknr, g_txt50.
CLEAR : g_wa_account, g_txt50.
ENDLOOP.
Code 2.
SELECT saknr INTO TABLE g_it_account FROM skat.
SELECT * INTO TABLE g_it_skat FROM skat
FOR ALL ENTRIES IN g_it_account
      WHERE spras = 'E'
        AND ktopl = 'XXXX'
        AND saknr = g_it_account-saknr.
LOOP AT g_it_account INTO g_wa_account.
READ TABLE g_it_skat INTO g_wa_skat WITH KEY saknr = g_wa_account-saknr.
WRITE :/ g_wa_account-saknr, g_wa_skat-txt50.
CLEAR : g_wa_account, g_wa_skat.
ENDLOOP.
Thanks & Regards,
Dileep .C

Hi Dilip.
from you both the code I have found that you are selecting 2 diffrent fields.
In Code 1.
you are selecting SAKNR and then for these SAKNR you are selecting TXT50 from the same table.
and in Code 2 you are selecting all the fields from SAKT table for all the values of SAKNR.
I don't know whats your requirement.
Better you declare a select option on screen and then fetch required fields from SAKT table for the values entered on screen for SAKNR.
you only need TXT50 and SAKNR fields.
so declare two types one for SAKNR and another for TXT50.
Points to be remember.
1. while using for all entries always check the for all entries table should not be blank.
2. you will have to fetch all the key fields in table while applying for all entries,
    you can compare key fields with a constant which is greater than initial value.
3. while reading the table sort the table by the field on which you are going to read it.
try this:
TYPES : BEGIN OF ty_account,
saknr TYPE skat-saknr,
END OF ty_account.
TYPES : begin of T_txt50,
      saknr type saknr,
      txt50 type txt50,
end of t_txt50.
DATA: i_account type table of t_account,
      w_account type t_account,
      i_txt50 type table t_txt50,
      w_txt50 type t_txt50.
select SAKNR from SKAT into table i_account.
if sy-subrc = 0.
sort i_account by saknr.
select saknr txt50 from SKAT into table i_txt50
for all entries in i_account
where SAKNR = i_account-SAKNR
here mention al the primary keys and compare them with their constants.
endif.
Note; here you need to take care that, you will have to fetch all the key fields in table i_txt50.
and compare those fields with there constants which should be greater than initial values.
they should be in proper sequence.
now for writing.
loop at i_account into w_account.
clear w_txt50.
sort i_txt50 by saknr.
read table i_txt50 into w_txt50 with key SAKNR = w_account-saknr
if sy-subrc = 0.
write: w_txt50-saknr, w-txt50-txt50.
clear w_txt50, w_account.
endif.
endloop.
Hope it wil clear your doubts.
Thanks
Lalit

How do I do use the custom code and format for a percentage with 2 decimals in Report Builder 3.0?

In Report Builder 3.0, I have the following custom code entered:
Public Function SafeDivide(Numerator as String, Denominator as String) as String
Try
If Numerator = “” or Denominator = “” then
Return “-“
End if
If Numerator = “-“ or Denominator = “-“ then
Return “-“
End If
If CDbl(Numerator) =0 or CDbl(Denominator) = 0 then
Return “-“
End if
If IsNothing(Numerator) or IsNothing(Denominator) then
Return "-"
End if
Return Val( ( (CDbl(Numerator) / CDbl(Denominator) )*100 ) )
Catch
Return "-"
End Try
End Function
I call the custom code in the cell with the following equation:
=Code.SafeDivide(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value),sum(Fields!LY_UNITS.Value))
I have the format for the cell set to 0.00%, but it’s not being followed.
I want the result to be formatted as a Percentage, but instead I get values like:
-78.9473684210
80
300
-100
I have the format for the cell set to 0.00%, but it’s not being followed.
How do I do use the custom code and format for a percentage with 2 decimals?

Hi AngP,
After testing the issue in my local environment, I can reproduce it. Based on my research, I find this issue is caused by the type of Units_VAR_Percentage cell is string, while the type of CDbl(Parameters!Var_Threshold.Value) is double, so they cannot be
compared.
To fix this issue, we can add a hidden column (Textbox91) next to the Units_VAR_Percentage column, and type =(sum(Fields!TY_UNITS.Value)-sum(Fields!LY_UNITS.Value)) /sum(Fields!LY_UNITS.Value) as the expression. Then use the expression below to control the
BackgroundColor:
=iif(iif(reportitems!Units_VAR_Percentage.Value=CStr(format(reportitems!Textbox91.Value,"0.00%")),reportitems!Textbox91.Value,0)>CDbl(Parameters!Var_Threshold.Value),"Yellow","PaleTurquoise")
If there are any other questions, please feel free to ask.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

For CS6 is there an easier way to redirect all my files and folders for all of the programs?

Hey adobe people, Im wondering, I know you can setup each preference individually, but I want to redirect all the catched space, storage of brushes, and etc for all my programs into another disk volume as in changing c/ to e/. Is there a way to do this with in one program to make it easier? I don't want to accidently delete files that all the adobe programs can't find.
The reason is I don't want to store anything other then the programs on the SSD, and in theory I want the other drive, so it can run faster.

There is no global option for this.
Mylenium

For abap-hr i need datatype and length for the fields which i selected

hi seniors,
      I got one task for which i have to get the data type and length for the fields of a table in abap-hr. I am using dd03l table, but my team leader told me to not to use this. So, please anybody can help, i will be thankfull.
      I have to select PA30 fields in which pernr and choic, subty and whatever i have selected the infotypes fields. If there is any function module to find data type and length or else any other table.
thanks,
sekhar.

Hi,
Try using the Function Module "DDIF_FIELDINFO_GET". You can use this for fetching the complete details of a structure or, a specific field.
Input:->
TABNAME        PA0001
FIELDNAME     PERNR
Output:->
Check the DFIES_TAB it will contain all the details you need for the specific field.
Sample--->
CALL FUNCTION 'DDIF_FIELDINFO_GET'
EXPORTING
    TABNAME              = 'PA0001'
*   FIELDNAME            = ' '
*   LANGU                = SY-LANGU
*   LFIELDNAME           = ' '
*   ALL_TYPES            = ' '
*   GROUP_NAMES          = ' '
*   UCLEN                =
*   DO_NOT_WRITE         = ' '
* IMPORTING
*   X030L_WA             =
*   DDOBJTYPE            =
*   DFIES_WA             =
*   LINES_DESCR          =
TABLES
   DFIES_TAB            = MY_DFIES_TAB
*   FIXED_VALUES         =
* EXCEPTIONS
*   NOT_FOUND            = 1
*   INTERNAL_ERROR       = 2
*   OTHERS               = 3.
Hope this was of some help.
Best regards,
Sagar.

Standard script and code for output control ticket in IW32

Hi,
I am working on a output control ticket which gets printed using transaction IW32.
I have to create Z driver program and z form and attach it to shop paper.
I just wanted to make sure that RIPRCT00 and PM_COMMON are the standard program and form for this output control ticket.
Because even though if I keep a break point in the program RIPRCT00 to see the data its fetching, when I do the print preview after going in IW32 I don't go inside the standard program RIPRCT00.
So I am wondering if RIPRCT00 and PM_COMMON are the standard prohgram and form attcahed with output control ticket ?

You must enter something in the form. The reason for this is because in the program when it is going to execute the print of the papers, it is call the subroutine(form) of the print program. It gets these values from your configuration in SPRO. It is doing something like this.
perform print_paper in program zriprct00.
Of course, "print_paper" and "zriprct00" are variables retrieved from the configuration.
So, in summary, In SPRO, configure the output type to use the PRINT_PAPER form of program "ZRIPRCT00" and the sapscript form ZPM_COMMON.
If you are developing a completely new "Z" print program, you must have an entry point in which the program is executed. You will have to have a subroutine(form) very simular to PRINT_PAPER, or you can just copy and paste that code into your new program.
Make sense?
Regards,
Rich Heilman

FM to fetch BUOM and PUOM for catcha weight materials

Similar Messages

Maybe you are looking for