Standard script and code for output control ticket in IW32

Hi,
I am working on a output control ticket which gets printed using transaction IW32.
I have to create Z driver program and z form and attach it to shop paper.
I just wanted to make sure that RIPRCT00 and PM_COMMON are the standard program and form for this output control ticket.
Because even though if I keep a break point in the program RIPRCT00 to see the data its fetching, when I do the print preview after going in IW32 I don't go inside the standard program RIPRCT00.
So I am wondering if RIPRCT00 and PM_COMMON are the standard prohgram and form attcahed with output control ticket ?

You must enter something in the form. The reason for this is because in the program when it is going to execute the print of the papers, it is call the subroutine(form) of the print program. It gets these values from your configuration in SPRO. It is doing something like this.
perform print_paper in program zriprct00.
Of course, "print_paper" and "zriprct00" are variables retrieved from the configuration.
So, in summary, In SPRO, configure the output type to use the PRINT_PAPER form of program "ZRIPRCT00" and the sapscript form ZPM_COMMON.
If you are developing a completely new "Z" print program, you must have an entry point in which the program is executed. You will have to have a subroutine(form) very simular to PRINT_PAPER, or you can just copy and paste that code into your new program.
Make sense?
Regards,
Rich Heilman

Similar Messages

Where can we find the standard program for scripts and smartform for vl02

where can we find the standard program for scripts and smartform for vl02
regard,
anil

If it is a standard Script Output see that all config in NACE tcode was done correctly and in the Application document the output type was properly defined and attached to a medium, partner and all communication related things like printer name, when to print the output and number of messages etc are entered in the document
the go to the related application Tcode
(for sales order goto VA02 or VA03)
(delivery -VL02N or VL03N)
for Invoice VF02 or VF03
for PO -goto ME9F
enter doc number, Issue Output to -> screen/printer
then see the output
step 1 : copy the z layout into testing client thru SCC1.
step2 : go to se71 and check modified layout.
step3 : if it is under logistics.. go to TCODE "NACE".
u will see various applictions for each business process.
there u have configure ur related layout according to requirments,
for example u consider for Request fo Quatation..
there is APPLICATION called "EA"
click and enter into it. configure it with ur requirments, for help consult with ur functonal consaltant, and save it.
step 4 : goto tcode ME9A for requst for quatation(RFQ).
step 5 : enter test data avalable and check it with message display.
it is same for other applications like Contract agreament --> ME9k
invoice --> vl02n
and goes on..
Reward points for useful Answers

How to configure the requirements for output control ?

Hi ,
I have some problems in configuring the requirements for output control like following :
My aim is to make a condition check when i create an inbound delivery ( VL31N) or MIGO ...., as default in the requirement check for output , a message type will be created automatically if the it satisfies the condition in the KOBEV .....KOBEV( each sub routine was defined with a message type ( V6 ) ( if sy-subrc = 0) . And then a printing program will be triggered to print the SAPscripts form in the table "tnapr" but even if i have put sy-subrc in ( KOBEV...KOBEV ) always = 0 the printing was not executed , and in this case i do not understand the reason why , If you please to help me this .
Thanks ,

Hi,
it seems that the requirement you made is not the reason why it's not printed. If you set sy-subrc to 0, this code should have no effect.
Cheers,
Stefan.

Check standard HTTP response code for 301

Hello, EveryBody, I have an error when i deployment a sao project ,
[11:26:11 AM] Deploying profile...
[11:26:11 AM] Wrote SAR file to C:\JDeveloper\mywork\weichaiESBApplication\WCPumaReceiveProject\deploy\sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Deploying sca_WCPumaReceiveProject_rev1.0.jar to AdminServer [crmserver:7001]
[11:26:11 AM] Processing sar=/C:/JDeveloper/mywork/weichaiESBApplication/WCPumaReceiveProject/deploy/sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Adding sar file - C:\JDeveloper\mywork\weichaiESBApplication\WCPumaReceiveProject\deploy\sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Preparing to send HTTP request for deployment
[11:26:11 AM] Creating HTTP connection to host:crmserver, port:7001
[11:26:11 AM] Sending internal deployment descriptor
[11:26:11 AM] Sending archive - sca_WCPumaReceiveProject_rev1.0.jar
[11:26:11 AM] Received HTTP response from the server, response code=301
[11:26:11 AM] Problem in sending HTTP request to the server. Check standard HTTP response code for 301
[11:26:11 AM] Error deploying archive sca_WCPumaReceiveProject_rev1.0.jar to AdminServer [crmserver:7001]
[11:26:11 AM] HTTP error code returned [301]
[11:26:11 AM] No error message is returned from the server.
[11:26:11 AM] #### Deployment incomplete. ####
[11:26:11 AM] Error deploying archive file:/C:/JDeveloper/mywork/weichaiESBApplication/WCPumaReceiveProject/deploy/sca_WCPumaReceiveProject_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
I user soa version 11.1.1, jdevelop 11.1.1, everybody who tell the answer,
thank you very much!

I try http://fujiulnsd3t:8001/soa-infra and get the following information.
===========================================================================
Welcome to the Oracle SOA Platform on WebLogic
SOA Version: v11.1.1.2.0 - 11.1.1.2.0_091103.1205.1216 built on Tue Nov 03 13:48:58 PST 2009
WebLogic Server 10.3.2.0 Tue Oct 20 12:16:15 PDT 2009 1267925 (10.3.2.0)
There are no composites deployed to the platform

Access sequence requirement for output control

Hi!
I would like to get some inputs on how access requirement for output control works. I created a new requirement for a condition table that has key combination billing type/sales org/country because I need to restrict the output for a paticular customer in one country. I think the requirement works fine such that it is not fulfilled for the customer that I want ot restrict, thus no output is created. However, I noticed that other customers in that sales org/country are affected by the requirement. The output is created (sy-subrc=0) but it is not processed (remains in yellow status). The output should be emailed immediately upon creation (medium 5/timing 4). For other sales org/countries the creation of output and sending of email work as expected.
I hope someone have valuable inputs regarding this.
Note: I created this discussion under ABAP development but it was rejected, for reason: This does not appear to be an ABAP question. So I hope I have selected the correct one with SD.
Cholen

There is Output determination log available in the output screen (see the menu). It tells everything about how the output was proposed.
If the requirement is not fulfilled, you won't see output created with any color - yellow, red or purple with sparkles. If output has been proposed and has a yellow light it means it has not been processed yet. Output is processed only after the document has been saved, so while creating the document, you'll never see any other color. If after saving the document output is still yellow, it must have a different timing than 'process immediately' and it will be processed according to that setting.
This is a very simple concept, well documented and discussed gazillion of times on SCN. Requirements and conditions are two different things with different purposes. You might want to read a bit more on the output determination.
Thank you.

Process and Code for writing an RFC to retrieve data from IT0006 and IT0655

Hi,
Can some body tell me the process and code for creating an RFC to retrieve data from IT0006 and IT0655.
Its very urgent........
Waiting for an early reply.....
Many thanks

Hello Krishna,
      The process for creating an entry in infotype is as follows.
1.First you get the personal number lock for upating.You can use function
    module ' BAPI_EMPLOYEE_ENQUEUE ' or ENQUEUE_EMPREL.
2.Pass the records to function module ' HR_INFOTYPE_OPERATION' with
   OPERATION - 'INS'.
3.Unlock the Employee by using function moule 'BAPI_EMPLOYEET_DEQUEUE'.
Regards,
Manoj.

Process and Code for writing an RFC to retrieve data from IT

Hi,
Can some body tell me the process and code for creating an RFC to retrieve data from IT0006 and IT0655.
Its very urgent........
Waiting for an early reply.....
Many thanks

Inside your RFC you can directly use select on PA0006 & PA0655
or use FM: HR_READ_INFOTYPE
if you wan for multiple pernrs then cal the FM inside a loop or you can use the select query for multiple pernrs
reward points if helpful

Forgotten administrator name and password for parental controls

hi. I've forgotten my administrator name and password for parental controls on my childs school macbook air. it has latest update and operating systems.

You are the administrator, so you should look at the name associated with your /Users/user_name/ folder or Home folder.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
    Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
     When the menubar appears select Terminal from the Utilities menu.
     Enter resetpassword at the prompt and press RETURN. Follow
     instructions in the dialog window that will appear.
     Or see:
       Reset a Mac OS X 10.7 Lion Password
       OS X Mountain Lion- Reset a login password,
       OS X Mavericks- Solve password problems,
       OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
     Mac OS X 10.6- If you forget your administrator password,
     OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
    How to reset your Mac OS X password without an installer disc | MacYourself
    Reset OS X Password Without an OS X CD — Tech News and Analysis
    How To Create A New Administrator Account - Hack Mac

I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

I just set an administrators name (my full name) and password for parental controls (using the one I always use) and now after restarting and trying to make changes to aprental controls it does not recognize my password

Hello, do you have another admin account to log into for a test?

How do I locate someone who can write some scripts and plugins for Illustrator CC?

How do I locate someone who can write some scripts and plugins for Illustrator CC?

I just wanted to add a screen shot of the dialog showing the sound in question.

BI 7.0. Standard cubes and reports for SD, MM, FI, CO, PP, PM

Hi All,
I desperately looking for a list of standard cubes and report for SD, MM, FI, CO, PP and PM .... is there a document on this complete
I tried searching but no avail
<removed by moderator>
Thanks in Advance
Nathan
Edited by: Siegfried Szameitat on Nov 7, 2008 9:20 AM

Can you tell how did you search ???
Just go to RSORBCT transaction and go to infocubes :
Just do find as 0SD .... you will find all Business contents for SD related, similarly for other modules..
If you have chosen grouping as "Before and After wards" you should find the entire flow along with reports.
Hope this helps.

Importing a pkg with rely on server storage and roles for access control

Hi we run std 2008 r2. I'm reading documentation on prot levels during pkg import to catalog at
https://msdn.microsoft.com/en-us/library/ms141747(v=sql.105).aspx but unfortunately the definition of prot level "rely on server storage and roles for access control"
isn't clear. They used the prot level name to define it which didn't help me.
This option looks appealing but it isn't clear why I need to enter a pswd when choosing this option. Will my peers need to know that pswd when they export? Will the sql agent job need to present that pswd when running? If I just keep current
prot level "encrypt with user" will the agent job be able to run it? I'm sure it (agent) isn't running with my creds now. Also, how can I tell what prot level it was deployed with last? I rt clicked on the pkg in the catalog
and don't see anything obvious about that. I already understand that on export prot level is changed to encrypt with user.
I'm going to look at the sql agen job right now to see what creds it runs with.

First thing to understand is that protection level is used for determining how package (dtsx) file have to be protected. Once package is deployed in server and executed from agent, the conventional way is to use method of configurations or parameters if
2012 to get required connection etc values and execute using it. It never uses the values that were set during the design time. So it doesnt matter what protection level was so far as its based on config
However if you're planning to export existing package to your system and do modification thats where protection level comes to play. If its set to any of ENcryptSensitive... type value then you'll to provide the value (either a passowrd or your userkey which
it takes automatically from login info) to see the sensitive info (connection info,passwords etc) The package will still open and so far as you manually type in missing values you will be able to execute the package. If protection level is set to one of ENcrptAll
then you will have no way to open package itself unless you provide password/ have correct userkey.
The rely on server storage option uses sql server security context itself ie it doesnt do any encryption within package by itself but will assume values based on sqlserver security. This is used when you store package itself in SQLServer itself (MSDB)
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page

'how to code for table control wizard in module pool program

Hi Gurus,
Please provide me a sample code of table control wizard...
Thanks in advance!!!!
Regards,
Kranthi

Hi Kranti,
check this code... it should be helpful
*& Module pool       Z_TABLE_CONTROL_WIZARD_DEMO                       *
PROGRAM z_table_control_wizard_demo             .
DATA: BEGIN OF lt_vbak OCCURS 0,
       flag TYPE c,
       vbeln TYPE vbeln_va,
       netwr TYPE netwr,
       kunnr TYPE kunnr,
      END OF lt_vbak.
DATA: sfkunnr TYPE kunnr.
*&spwizard: declaration of tablecontrol 'TCONTROL' itself
CONTROLS: tcontrol TYPE TABLEVIEW USING SCREEN 9000.
*&spwizard: lines of tablecontrol 'TCONTROL'
DATA:     g_tcontrol_lines LIKE sy-loopc.
DATA:     ok_code LIKE sy-ucomm.
*&spwizard: output module for tc 'TCONTROL'. do not change this line!
*&spwizard: update lines for equivalent scrollbar
MODULE tcontrol_change_tc_attr OUTPUT.
DESCRIBE TABLE lt_vbak LINES tcontrol-lines.
ENDMODULE.                    "TCONTROL_change_tc_attr OUTPUT
*&spwizard: output module for tc 'TCONTROL'. do not change this line!
*&spwizard: get lines of tablecontrol
MODULE tcontrol_get_lines OUTPUT.
g_tcontrol_lines = sy-loopc.
ENDMODULE.                    "TCONTROL_get_lines OUTPUT
*&spwizard: input module for tc 'TCONTROL'. do not change this line!
*&spwizard: modify table
MODULE tcontrol_modify INPUT.
MODIFY lt_vbak
    INDEX tcontrol-current_line.
ENDMODULE.                    "TCONTROL_modify INPUT
*&spwizard: input modul for tc 'TCONTROL'. do not change this line!
*&spwizard: mark table
MODULE tcontrol_mark INPUT.
DATA: g_tcontrol_wa2 LIKE LINE OF lt_vbak.
IF tcontrol-line_sel_mode = 1.
    LOOP AT lt_vbak INTO g_tcontrol_wa2
      WHERE flag = 'X'.
      g_tcontrol_wa2-flag = ''.
      MODIFY lt_vbak
        FROM g_tcontrol_wa2
        TRANSPORTING flag.
    ENDLOOP.
ENDIF.
MODIFY lt_vbak
    INDEX tcontrol-current_line
    TRANSPORTING flag.
ENDMODULE.                    "TCONTROL_mark INPUT
*&spwizard: input module for tc 'TCONTROL'. do not change this line!
*&spwizard: process user command
MODULE tcontrol_user_command INPUT.
ok_code = sy-ucomm.
PERFORM user_ok_tc USING    'TCONTROL'
                              'LT_VBAK'
                              'FLAG'
                     CHANGING ok_code.
sy-ucomm = ok_code.
ENDMODULE.                    "TCONTROL_user_command INPUT
*   INCLUDE TABLECONTROL_FORMS                                         *
*&      Form USER_OK_TC                                               *
FORM user_ok_tc USING    p_tc_name TYPE dynfnam
                         p_table_name
                         p_mark_name
                CHANGING p_ok      LIKE sy-ucomm.
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA: l_ok              TYPE sy-ucomm,
        l_offset          TYPE i.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
*&SPWIZARD: Table control specific operations                          *
*&SPWIZARD: evaluate TC name and operations                            *
SEARCH p_ok FOR p_tc_name.
IF sy-subrc <> 0.
    EXIT.
ENDIF.
l_offset = STRLEN( p_tc_name ) + 1.
l_ok = p_ok+l_offset.
*&SPWIZARD: execute general and TC specific operations                 *
CASE l_ok.
    WHEN 'INSR'.                      "insert row
      PERFORM fcode_insert_row USING    p_tc_name
                                        p_table_name.
      CLEAR p_ok.
    WHEN 'DELE'.                      "delete row
      PERFORM fcode_delete_row USING    p_tc_name
                                        p_table_name
                                        p_mark_name.
      CLEAR p_ok.
    WHEN 'P--' OR                     "top of list
         'P-' OR                     "previous page
         'P+' OR                     "next page
         'P++'.                       "bottom of list
      PERFORM compute_scrolling_in_tc USING p_tc_name
                                            l_ok.
      CLEAR p_ok.
*     WHEN 'L--'.                       "total left
*       PERFORM FCODE_TOTAL_LEFT USING P_TC_NAME.
*     WHEN 'L-'.                        "column left
*       PERFORM FCODE_COLUMN_LEFT USING P_TC_NAME.
*     WHEN 'R+'.                        "column right
*       PERFORM FCODE_COLUMN_RIGHT USING P_TC_NAME.
*     WHEN 'R++'.                       "total right
*       PERFORM FCODE_TOTAL_RIGHT USING P_TC_NAME.
    WHEN 'MARK'.                      "mark all filled lines
      PERFORM fcode_tc_mark_lines USING p_tc_name
                                        p_table_name
                                        p_mark_name   .
      CLEAR p_ok.
    WHEN 'DMRK'.                      "demark all filled lines
      PERFORM fcode_tc_demark_lines USING p_tc_name
                                          p_table_name
                                          p_mark_name .
      CLEAR p_ok.
*     WHEN 'SASCEND'   OR
*          'SDESCEND'.                  "sort column
*       PERFORM FCODE_SORT_TC USING P_TC_NAME
*                                   l_ok.
ENDCASE.
ENDFORM.                              " USER_OK_TC
*&      Form FCODE_INSERT_ROW                                         *
FORM fcode_insert_row
              USING    p_tc_name           TYPE dynfnam
                       p_table_name             .
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA l_lines_name       LIKE feld-name.
DATA l_selline          LIKE sy-stepl.
DATA l_lastline         TYPE i.
DATA l_line             TYPE i.
DATA l_table_name       LIKE feld-name.
FIELD-SYMBOLS <tc>                 TYPE cxtab_control.
FIELD-SYMBOLS <table>              TYPE STANDARD TABLE.
FIELD-SYMBOLS <lines>              TYPE i.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (p_tc_name) TO <tc>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE p_table_name '[]' INTO l_table_name. "table body
ASSIGN (l_table_name) TO <table>.                "not headerline
*&SPWIZARD: get looplines of TableControl                              *
CONCATENATE 'G_' p_tc_name '_LINES' INTO l_lines_name.
ASSIGN (l_lines_name) TO <lines>.
*&SPWIZARD: get current line                                           *
GET CURSOR LINE l_selline.
IF sy-subrc <> 0.                   " append line to table
    l_selline = <tc>-lines + 1.
*&SPWIZARD: set top line                                               *
    IF l_selline > <lines>.
      <tc>-top_line = l_selline - <lines> + 1 .
    ELSE.
      <tc>-top_line = 1.
    ENDIF.
ELSE.                               " insert line into table
    l_selline = <tc>-top_line + l_selline - 1.
    l_lastline = <tc>-top_line + <lines> - 1.
ENDIF.
*&SPWIZARD: set new cursor line                                        *
l_line = l_selline - <tc>-top_line + 1.
*&SPWIZARD: insert initial line                                        *
INSERT INITIAL LINE INTO <table> INDEX l_selline.
<tc>-lines = <tc>-lines + 1.
*&SPWIZARD: set cursor                                                 *
SET CURSOR LINE l_line.
ENDFORM.                              " FCODE_INSERT_ROW
*&      Form FCODE_DELETE_ROW                                         *
FORM fcode_delete_row
              USING    p_tc_name           TYPE dynfnam
                       p_table_name
                       p_mark_name   .
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA l_table_name       LIKE feld-name.
FIELD-SYMBOLS <tc>         TYPE cxtab_control.
FIELD-SYMBOLS <table>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <wa>.
FIELD-SYMBOLS <mark_field>.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (p_tc_name) TO <tc>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE p_table_name '[]' INTO l_table_name. "table body
ASSIGN (l_table_name) TO <table>.                "not headerline
*&SPWIZARD: delete marked lines                                        *
DESCRIBE TABLE <table> LINES <tc>-lines.
LOOP AT <table> ASSIGNING <wa>.
*&SPWIZARD: access to the component 'FLAG' of the table header         *
    ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
    IF <mark_field> = 'X'.
      DELETE <table> INDEX syst-tabix.
      IF sy-subrc = 0.
        <tc>-lines = <tc>-lines - 1.
      ENDIF.
    ENDIF.
ENDLOOP.
ENDFORM.                              " FCODE_DELETE_ROW
*&      Form COMPUTE_SCROLLING_IN_TC
*       text
*      -->P_TC_NAME name of tablecontrol
*      -->P_OK       ok code
FORM compute_scrolling_in_tc USING    p_tc_name
                                      p_ok.
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA l_tc_new_top_line     TYPE i.
DATA l_tc_name             LIKE feld-name.
DATA l_tc_lines_name       LIKE feld-name.
DATA l_tc_field_name       LIKE feld-name.
FIELD-SYMBOLS <tc>         TYPE cxtab_control.
FIELD-SYMBOLS <lines>      TYPE i.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (p_tc_name) TO <tc>.
*&SPWIZARD: get looplines of TableControl                              *
CONCATENATE 'G_' p_tc_name '_LINES' INTO l_tc_lines_name.
ASSIGN (l_tc_lines_name) TO <lines>.
*&SPWIZARD: is no line filled?                                         *
IF <tc>-lines = 0.
*&SPWIZARD: yes, ...                                                   *
    l_tc_new_top_line = 1.
ELSE.
*&SPWIZARD: no, ...                                                    *
    CALL FUNCTION 'SCROLLING_IN_TABLE'
         EXPORTING
              entry_act             = <tc>-top_line
              entry_from            = 1
              entry_to              = <tc>-lines
              last_page_full        = 'X'
              loops                 = <lines>
              ok_code               = p_ok
              overlapping           = 'X'
         IMPORTING
              entry_new             = l_tc_new_top_line
         EXCEPTIONS
*              NO_ENTRY_OR_PAGE_ACT = 01
*              NO_ENTRY_TO           = 02
*              NO_OK_CODE_OR_PAGE_GO = 03
              OTHERS                = 0.
ENDIF.
*&SPWIZARD: get actual tc and column                                   *
GET CURSOR FIELD l_tc_field_name
             AREA l_tc_name.
IF syst-subrc = 0.
    IF l_tc_name = p_tc_name.
*&SPWIZARD: et actual column                                           *
      SET CURSOR FIELD l_tc_field_name LINE 1.
    ENDIF.
ENDIF.
*&SPWIZARD: set the new top line                                       *
<tc>-top_line = l_tc_new_top_line.
ENDFORM.                              " COMPUTE_SCROLLING_IN_TC
*&      Form FCODE_TC_MARK_LINES
*       marks all TableControl lines
*      -->P_TC_NAME name of tablecontrol
FORM fcode_tc_mark_lines USING p_tc_name
                               p_table_name
                               p_mark_name.
*&SPWIZARD: EGIN OF LOCAL DATA-----------------------------------------*
DATA l_table_name       LIKE feld-name.
FIELD-SYMBOLS <tc>         TYPE cxtab_control.
FIELD-SYMBOLS <table>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <wa>.
FIELD-SYMBOLS <mark_field>.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (p_tc_name) TO <tc>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE p_table_name '[]' INTO l_table_name. "table body
ASSIGN (l_table_name) TO <table>.                "not headerline
*&SPWIZARD: mark all filled lines                                      *
LOOP AT <table> ASSIGNING <wa>.
*&SPWIZARD: access to the component 'FLAG' of the table header         *
    ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
    <mark_field> = 'X'.
ENDLOOP.
ENDFORM.                                          "fcode_tc_mark_lines
*&      Form FCODE_TC_DEMARK_LINES
*       demarks all TableControl lines
*      -->P_TC_NAME name of tablecontrol
FORM fcode_tc_demark_lines USING p_tc_name
                                 p_table_name
                                 p_mark_name .
*&SPWIZARD: BEGIN OF LOCAL DATA----------------------------------------*
DATA l_table_name       LIKE feld-name.
FIELD-SYMBOLS <tc>         TYPE cxtab_control.
FIELD-SYMBOLS <table>      TYPE STANDARD TABLE.
FIELD-SYMBOLS <wa>.
FIELD-SYMBOLS <mark_field>.
*&SPWIZARD: END OF LOCAL DATA------------------------------------------*
ASSIGN (p_tc_name) TO <tc>.
*&SPWIZARD: get the table, which belongs to the tc                     *
CONCATENATE p_table_name '[]' INTO l_table_name. "table body
ASSIGN (l_table_name) TO <table>.                "not headerline
*&SPWIZARD: demark all filled lines                                    *
LOOP AT <table> ASSIGNING <wa>.
*&SPWIZARD: access to the component 'FLAG' of the table header         *
    ASSIGN COMPONENT p_mark_name OF STRUCTURE <wa> TO <mark_field>.
    <mark_field> = space.
ENDLOOP.
ENDFORM.                                          "fcode_tc_mark_lines
*&      Module STATUS_9000 OUTPUT
*       text
MODULE status_9000 OUTPUT.
SET PF-STATUS 'S9000'.
SET TITLEBAR 'T9000'.
ENDMODULE.                 " STATUS_9000 OUTPUT
*&      Module USER_COMMAND_9000 INPUT
*       text
MODULE user_command_9000 INPUT.
CASE sy-ucomm.
    WHEN 'BACK' OR 'EXIT' OR 'CANCEL'.
      LEAVE TO SCREEN 0.
    WHEN 'DISP'.
      SELECT vbeln netwr kunnr INTO CORRESPONDING FIELDS OF TABLE lt_vbak
      FROM vbak
      WHERE kunnr = sfkunnr.
*    LEAVE TO LIST-PROCESSING [AND RETURN TO SCREEN <nnnn>].
*    By default, the dialog processor returns to the PBO processing of
*    the screen from which the list processor was called. The optional
*    addition AND RETURN TO SCREEN allows you to specify a different
*    screen in the current screen sequence at whose PBO event you want
*    to resume processing.
    when 'LIST'.
    LEAVE TO LIST-PROCESSING.
    WRITE:/ 'Time :', SY-UZEIT.
    LOOP AT LT_VBAK.
    WRITE:/ LT_VBAK-VBELN,
            LT_VBAK-NETWR,
            LT_VBAK-KUNNR.
    ENDLOOP.
    WHEN 'SUBM'.
*& You can call executable programs from other ABAP programs using the
*& following statement:
*& SUBMIT <rep>|(<field>) [AND RETURN] [<options>].
      SUBMIT z_submit_report VIA SELECTION-SCREEN AND RETURN.
ENDCASE.
ENDMODULE.                 " USER_COMMAND_9000 INPUT
                                                 TABLE CONTROL WIZARD SE51 CODE
PROCESS BEFORE OUTPUT.
*&spwizard: pbo flow logic for tablecontrol 'TCONTROL'
module TCONTROL_change_tc_attr.
*&spwizard: module TCONTROL_change_col_attr.
loop at   LT_VBAK
       with control TCONTROL
       cursor TCONTROL-current_line.
    module TCONTROL_get_lines.
*&spwizard:   module TCONTROL_change_field_attr
endloop.
MODULE STATUS_9000.
PROCESS AFTER INPUT.
*&spwizard: pai flow logic for tablecontrol 'TCONTROL'
loop at LT_VBAK.
    chain.
      field LT_VBAK-VBELN.
      field LT_VBAK-NETWR.
      field LT_VBAK-KUNNR.
      module TCONTROL_modify on chain-request.
    endchain.
    field LT_VBAK-FLAG
      module TCONTROL_mark on request.
endloop.
module TCONTROL_user_command.
*&spwizard: module TCONTROL_change_tc_attr.
*&spwizard: module TCONTROL_change_col_attr.
MODULE USER_COMMAND_9000.
regards
padma

Wanted a code for table controls in bdc

hi,
i have written code for uploading data into FB60 transaction but i have a serious problem with that code.
after entering 10 line items and when i am entering 11th item it is saying that the screen doesnot contain 11th line.
so please modify my program or if you can please send me a program for handling table controls more line details.
thanks and i will surely provide ten points to it.
my code is
LOOP AT I_PREPARE INTO WA_PREPARE.
V_VALUE = WA_PREPARE-LINE+0(2).
CASE V_VALUE.
WHEN 'A'.
CLEAR:V_DCNT.
*UPLOAD THE COMPANY CODE TO FB60.
*PERFORM.......USING WA_PREPARE-LINE+2(4).
*? filling header data
*********to initialize the company code and to get the popup**********
PERFORM SET_BUKRS.
PERFORM BDC_DYNPRO      USING 'SAPLACHD' '1000'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                'BKPF-BUKRS'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '=ENTR'.
BUKRS = WA_PREPARE-LINE+2(4).
PERFORM BDC_FIELD       USING 'BKPF-BUKRS'
                                      BUKRS.
PERFORM BDC_DYNPRO      USING 'SAPMF05A' '1100'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                                '/00'.
PERFORM BDC_FIELD       USING 'RF05A-BUSCS'
                                'R'.
*UPLOAD THE VENDOR NUMBER TO FB60
*PERFORM.......USING WA_PREPARE-LINE+45(10).
ACCNT = WA_PREPARE-LINE+45(10).
PERFORM BDC_FIELD       USING 'INVFO-ACCNT'
                                       ACCNT.
*UPLOAD THE DATE TO FB60
WRITE WA_PREPARE-LINE+34(8) TO V_DATE USING EDIT MASK ' . .    .'
*PERFORM.......USING V_DATE.
PERFORM BDC_FIELD       USING 'INVFO-BLDAT'
                                '15.09.2004'.
PERFORM BDC_FIELD       USING 'INVFO-BUDAT'
                                '15.09.2004'.
*UPLOAD THE AMOUNT TO FB60
*PERFORM.......USING WA_PREPARE-LINE+85(15).
WRBTR = WA_PREPARE-LINE+85(15).
PERFORM BDC_FIELD       USING 'INVFO-WRBTR'
                                       WRBTR.
*UPLOAD THE CURRENCY CODE TO FB60
*PERFORM.......USING WA_PREPARE-LINE+100(3).
WAERS = WA_PREPARE-LINE+100(3).
PERFORM BDC_FIELD       USING 'INVFO-WAERS'
                                WAERS.
WHEN 'D'.
V_DCNT = V_DCNT + 1.
IF V_DCNT GT 04.
   V_DCNT = 04.
ENDIF.
*UPLOAD THE G/L ACC. TO FB60.
*PERFORM.......USING WA_PREPARE-LINE+51(20).
*? filling item data
CONCATENATE 'ACGL_ITEM-WRBTR(' V_DCNT ')' INTO FNAM.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                                FNAM.
CONCATENATE 'ACGL_ITEM-HKONT(' V_DCNT ')' INTO FNAM.
HKONT = WA_PREPARE-LINE+51(20).
PERFORM BDC_FIELD       USING FNAM
                                HKONT.
*UPLOAD THE AMOUNT TO FB60(ACGL_ITEM-WRBTR)
*PERFORM........USING WA_PREPARE-LINE+121(15).
CONCATENATE 'ACGL_ITEM-WRBTR(' V_DCNT ')' INTO FNAM.
WRBTR = WA_PREPARE-LINE+75(15).
PERFORM BDC_FIELD       USING FNAM
                                WRBTR.
PERFORM BDC_DYNPRO      USING 'SAPMF05A' '1100'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                            '=0006'.
PERFORM BDC_FIELD       USING 'RF05A-BUSCS'
                                'R'.
ENDCASE.

hi,
check this example:
http://www.sap-img.com/abap/bdc-example-using-table-control-in-bdc.htm
REPORT ZSR_BDC_TBCTRL
        NO STANDARD PAGE HEADING LINE-SIZE 255.
TABLES : RF02K,LFA1,LFBK.
DATA : BEGIN OF IT_VEN OCCURS 0,
      LIFNR LIKE RF02K-LIFNR,
      KTOKK LIKE RF02K-KTOKK,
      NAME1 LIKE LFA1-NAME1,
      SORTL LIKE LFA1-SORTL,
      LAND1 LIKE LFA1-LAND1,
      SPRAS LIKE LFA1-SPRAS,
      BANKS(6) TYPE C,
      BANKL(17) TYPE C,
      BANKN(19) TYPE C,
      END OF IT_VEN.
DATA : BEGIN OF BANKS OCCURS 0,
       BANKS LIKE LFBK-BANKS,
       END OF BANKS,
       BEGIN OF BANKL OCCURS 0,
       BANKL LIKE LFBK-BANKL,
       END OF BANKL,
       BEGIN OF BANKN OCCURS 0,
       BANKN LIKE LFBK-BANKN,
       END OF BANKN.
DATA : FLD(20) TYPE C,
       CNT(2) TYPE N.
DATA : BDCTAB LIKE BDCDATA OCCURS 0 WITH HEADER LINE.
INCLUDE BDCRECX1.
START-OF-SELECTION.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
    FILENAME                      = 'Z:\sr.TXT'
   FILETYPE                      = 'ASC'
   HAS_FIELD_SEPARATOR           = 'X'
HEADER_LENGTH                 = 0
READ_BY_LINE                  = 'X'
DAT_MODE                      = ' '
CODEPAGE                      = ' '
IGNORE_CERR                   = ABAP_TRUE
REPLACEMENT                   = '#'
CHECK_BOM                     = ' '
IMPORTING
FILELENGTH                    =
HEADER                        =
TABLES
    DATA_TAB                      = IT_VEN
EXCEPTIONS
FILE_OPEN_ERROR               = 1
FILE_READ_ERROR               = 2
NO_BATCH                      = 3
GUI_REFUSE_FILETRANSFER       = 4
INVALID_TYPE                  = 5
NO_AUTHORITY                  = 6
UNKNOWN_ERROR                 = 7
BAD_DATA_FORMAT               = 8
HEADER_NOT_ALLOWED            = 9
SEPARATOR_NOT_ALLOWED         = 10
HEADER_TOO_LONG               = 11
UNKNOWN_DP_ERROR              = 12
ACCESS_DENIED                 = 13
DP_OUT_OF_MEMORY              = 14
DISK_FULL                     = 15
DP_TIMEOUT                    = 16
OTHERS                        = 17
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
PERFORM OPEN_GROUP.
LOOP AT IT_VEN.
    REFRESH BDCDATA.
    REFRESH : BANKS,BANKL,BANKN..
    SPLIT IT_VEN-BANKS AT ',' INTO TABLE BANKS.
    SPLIT IT_VEN-BANKL AT ',' INTO TABLE BANKL.
    SPLIT IT_VEN-BANKN AT ',' INTO TABLE BANKN.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0100'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'RF02K-KTOKK'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'RF02K-LIFNR'
                              IT_VEN-LIFNR.
PERFORM BDC_FIELD       USING 'RF02K-KTOKK'
                              IT_VEN-KTOKK.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0110'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-SPRAS'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_FIELD       USING 'LFA1-NAME1'
                              IT_VEN-NAME1.
PERFORM BDC_FIELD       USING 'LFA1-SORTL'
                              IT_VEN-SORTL.
PERFORM BDC_FIELD       USING 'LFA1-LAND1'
                              IT_VEN-LAND1.
PERFORM BDC_FIELD       USING 'LFA1-SPRAS'
                              IT_VEN-SPRAS.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0120'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFA1-KUNNR'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '/00'.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKN(02)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
*perform bdc_field       using 'LFBK-BANKS(01)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKS(02)'
                             'DE'.
*perform bdc_field       using 'LFBK-BANKL(01)'
                             '10020030'.
*perform bdc_field       using 'LFBK-BANKL(02)'
                             '67270003'.
*perform bdc_field       using 'LFBK-BANKN(01)'
                             '12345'.
*perform bdc_field       using 'LFBK-BANKN(02)'
                             '66666'.
MOVE 1 TO CNT.
    LOOP AT BANKS.
      CONCATENATE 'LFBK-BANKS(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKS-BANKS.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKL.
      CONCATENATE 'LFBK-BANKL(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKL-BANKL.
      CNT = CNT + 1.
    ENDLOOP.
    MOVE 1 TO CNT.
    LOOP AT BANKN.
      CONCATENATE 'LFBK-BANKN(' CNT ') ' INTO FLD.
      PERFORM BDC_FIELD USING FLD BANKN-BANKN.
      CNT = CNT + 1.
    ENDLOOP.
PERFORM BDC_DYNPRO      USING 'SAPMF02K' '0130'.
PERFORM BDC_FIELD       USING 'BDC_CURSOR'
                              'LFBK-BANKS(01)'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=ENTR'.
PERFORM BDC_DYNPRO      USING 'SAPLSPO1' '0300'.
PERFORM BDC_FIELD       USING 'BDC_OKCODE'
                              '=YES'.
PERFORM BDC_TRANSACTION USING 'XK01'.
ENDLOOP.
PERFORM CLOSE_GROUP.

Creation of Process code for output type

Hi,
Could someone help me out in defining processcodes for output types.
Thanks in advance,
Yaseen

Hi Yaseen,
The Tr.code WE41 and WE42 are also used for maintaining process codes.
To maintain process codes in WE41 or WE42, Go to these Tr.Codes and Click on the Change button. Then click on "new entries" button to create your new process code.
FYI, Outbound process codes are stored in SAP Table TEDE1 and inbound process codes are stored in SAP Table TEDE2.
Hope this helps.
Rgds,
Sam Raju
Message was edited by: Sam Raju

Standard script and code for output control ticket in IW32

Similar Messages

Maybe you are looking for