FMLE crashes on MAC when using with an AJA Kona card. Is this card supported?

We are having problems using FMLE with an AJA Kona input
card. Whenever we try to change the input settings in FMLE the program crashes.
Osx 10.5.6 and Quicktime 7... are installed.
Any thoughts or similar experiences?

Please visit the official Liverpool FC website at http://www.liverpoolfc.tv/ for the latest news, views, match coverage and goals.
Liverpool Football Club and Athletic Grounds Limited is a company registered in England and Wales with the following details:
Company Number: 35668, VAT Registration No: 325 1957 56, Registered Office: Anfield Road, Liverpool, L4 0TH
Trading Office: Anfield Road, Liverpool, L4 0TH. Contact: mailto:[email protected]
This email and any files transmitted may contain privileged and confidential information. If you are not the intended recipient, you must not copy or distribute it. If you have received this email in error, please notify the sender or mailto:[email protected] and delete the email transmission immediately. You should ensure that this email and any attachments are virus free.Email is not a 100% secure communications medium. We advise that you understand this lack of security and take any necessary measures when emailing us. We reserve the right to read any email or attachment entering or leaving our systems from any source without prior notice.

Similar Messages

My printers have become all of a sudden very slow over my network when used with my Macbook. What could this indicate ?

My two printers on my network (HP 8500 All in one Officejet and Lexmark Pro 805) have become very slow with processing and printing my documents. When printing, they have also made it not possible to do other applications on my Macbook until finished printing. WHat does ths point in the direction of ?

Empty your print queue of excess print jobs that didn't go through.
If you are within 1500 feet (500 meters) of someone who might connect wirelessly, make sure any wireless network you have is WPA2 encrypted, and not using 802.11b. Reboot the printers, and any routers they may be connected to.

Test runner freezing when used with Dynamics CRM (and other apps) - Both applications freeze and never come back...

We are trying to use test runner with dynamics CRM.
MS Dynamics CRM will freeze and will not respond (even after 10 - 15 minutes). When this happens, the test manager will either freeze or a message will apear saying "waiting for application under test".
We are not recording action recordings...This makes using test manager impossible. It happens consistently, starting with slowing the PC down (mouse moving slowly, slow to load in new screens, drop downs etc) eventually leading to the app freezing.
Tried on windows xp, windows 7 etc on various specs of pcs.

I am experiencing this same issue with
Test runner freezing when used with Dynamics CRM. I notice this was first posted in June of 2010 and so far no
resolution? I was wondering if it could be related to memory issues? Do you have any troubleshooting ideas? The
issue for me seems to be sporadic and I can't
reproduce it every time.
The message I get is "waiting on application under test".
DLM

After Effects CS5 is crashing my Mac when I trim a clip

I don't have much to explain this further but After Effects CS5 is crashing my Mac when I trim a clip. It completely turns off my Mac when I trim a clip. The only other similar thing is Photoshop CS5 is also doing crashing my Mac when I resize large images. Small images are fine but large 300dpi images crashes it without warning. Don't know what to do.
I have 8gigs of Ram and am running 27" iMac Core i5
Any help would be much appreciated!
Thanks,
Hal

Are you running these two program together?
I would think so.OK you are probably running them both as 64 bit that is great that they run 64 bit and can use more RAM and even better they actually do use more RAM.
So the solution is probably more RAM, don't run them to together or lower the expectations of Photoshop and AE.
That way they won't try to use all the RAM to do this work. It will probably do the wrk pretty fast but not as fast if you had more RAM maybe.
Also AE and PS on an iMac, what about your scratch disk. Is it a very fast external drive and how is it connected?
If you don't have a fast internal drive say with at least a 32MB buffer running at 7200rpm then there you go a real contributing ffactor.
To be honest you need both more RAM and a fast start up disk and a fast external scratch.
The new 2TB drives by Seagate run at 7200 rpm and have 64 MB cache which s as important as the rotation. You can possibly make a Raptor an external scratch as well at 300 GB they are probably not arge enough s a start up.
Those are my thoughts.
16 GB of RAM a larger faster internal drive lower the performance and memory setting as well.

ICloud keeps crashing my iPads when using photo stream

iCloud keeps crashing my iPad when using photo stream, photo stream has downloaded over 600 .png files to my photo stream which are mac icons - these are causing all 3 iPads on iCloud to crash and report .panic.plist error messages. Help? I have turned off iCloud for now which allows the iPad to work.these icons were on my iMac too on iphoto which I have deleted and on our iPhones again which I have deleted. Would like to use iCloud but not until I can fix this issue.

Hi elizabethfromfernhurst,
Welcome to the Apple Support Communities!
If you are getting the .panic.plist alerts on your iPad when using iCloud, I would suggest restoring the iPad back to its factory settings and using iCloud to sync your data back to the device.
Use iTunes to restore your iOS device to factory settings
http://support.apple.com/kb/HT1414
Have a great day,
Joe

Photoshop CS5 crashing my Mac when resizing large images

I don't have much to explain this further but Photoshop CS5 is crashing my Mac when I resize large images. Small images are fine but large 300dpi images crashes it without warning. Don't know what to do. The only other similar thing is After Effects CS5 is crashing my Mac when I trim a clip. It completely turns off my Mac when I trim a clip.
I have 8gigs of Ram and am running 27" iMac Core i5
Any help would be much appreciated!
Thanks,
Hal

Hi Wendy
Thank you for your insights. We are having the same problems here.
It's been a headache as we bought two 27" iMacs in March 2011; and we've had even BOTH iMacs exchanged.
After exchanging, same thing happened. We then got all 16GB of RAM on each iMac replaced.
But we noticed that the auto-shutdown problem happens with files on 300dpi. We are contemplating on changing them to 299dpi though haha!
Unfortunately, here in Singapore, we don't have a physical Apple store. We only have Premium Resellers.
And the other unfortunate thing is, when RAMs are upgraded these Premium Resellers sell 3rd party RAMs.
I supposed we'll have to deal with this for now until we have enough funds to replace ALL 32 RAMs to original Apple RAMs (which will cost abt another USD1600!!) ..
Hope this forum helps others as much as it finally helped me understand the issue we're having.

Crash or freeze when using Spot Removal

I am having problem with my lightroom 4.2, when I try to use the clone tool my computer crash or keep not responding can anyone help to understand what may be happening ?
Message title was edited by: Brett N

yes it is Windows 7
Date: Sat, 27 Oct 2012 14:46:54 -0600
From: [email protected]
To: [email protected]
Subject: Crash or freeze when using Spot Removal
    Re: Crash or freeze when using Spot Removal
    created by Geoff the kiwi in Photoshop Lightroom - View the full discussion
Is that Windows 7.You can look in the Help Menu in the Menu bar for Lightroom and under System Info you will find what is being asked for.
     Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/4805402#4805402
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4805402#4805402
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4805402#4805402. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Lightroom by email or at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

How can I force mount a dvd that isn't even seen by Disk Utility? I can see it on the Mac when using my Windows 7 partition via Boot Camp, but not in Lion, which is how I would rather be running.

Well if there is a EFI block, then running a program in OS X isn't going to do a lick of good.
After all EFI was designed for Trusted Computing and Digital Rights Management, to act between the OS and hardware, can read drives, contact the Internet and everything.
Windows doesn't use EFI, will have UEFI in Windows 8 though.

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

I have created a PDF with mp3 audio clips, the file works on PC's with audio playback (WIndows 7, 8 ) however the audio does not play when hosted on a website or an ipad/tablet computer or smart phone when used with PDF reader

adobe42135678 wrote:
the audio does not play when hosted on a website...
When viewing in what browser?

I am programmer and I am using dr java on my mac-book pro with retina display but dr java doesn't support retina display, what is the possible way to solve this ?

I am programmer and I am using dr java on my mac-book pro with retina display but dr java doesn't support retina display, what is the possible way to solve this ?

I have made some progress.... I can print wirelessly from my printer now, but I can't set the printer itself to be wireless. I had to move my printer downstairs to where my router is...which is not that convient. I printed up the page you asked about....and as expected, it says it is off line and there is no IP address. So now I need to figure out how to make my printer itself wireless. I did download the HP driver I needed...but I can't access it to do anything else. It seems l like I am missing a step... or I need to hook up my computer itself to the printer to help get the printer to be wirelss, but I can't hook it up because there is no port for me to do that (no port that looks like a phone jack). I am guessing I would need a different type of cord, but I am not sure what kind of cord that would be! Ugh!

ExecuteNonQuery doesnt return number of rows affected when used with PL/SQL

ExecuteNonQuery doesn't return number of rows affected when used with PL/SQL but returns -1. The documentation says ExecuteNonQuery method of OracleCommand returns the number of raws affected but when used with PL/SQL, it returns -1 even the update statement successfully executes and affects multiple records with no exeptions thrown.
However, if ExecuteNonQuery is used with update sql statement in the asp.net code it returns number of rows affected correctly. Does anybody know why ExecuteNonQuery behaves like this?
I am using ODP.NET that comes with Oracle Client 11g. The version is 2.111.6.20 of ODP.NET, Oracle database server is 10g.
Marat

You can get the rowcount in the stored procedure via SQL%ROWCOUNT and then pass it out as a parameter.
For example:
SQL> create or replace procedure updatesal(v_deptno in number, v_rowsaff out number) as
2 begin
3 update emp set sal = sal * 5 where deptno = v_deptno;
4 v_rowsaff := SQL%ROWCOUNT;
5 end;
6 /
Procedure created.Cheers

Where do I go for a safe driver for the Mac for use with Altec Lansing Technologies IMT227 OrbitM Ultra Portable Speakers?

Where do I go for a safe driver for the Mac for use with Altec Lansing Technologies IMT227 OrbitM Ultra Portable Speakers?

This is an Altec Lansing IMT227 OrbitM etc
Is this what you have?
Here is the specification, please note, no USB
You are either mistaken or talking about a different model.

Quicktime Player with the magic mouse, when used with a bug -

On 10.7 Lion, Quicktime Player with the magic mouse, when used with a bug …
Quicktime Player will not respond, but use the USB mouse with no problem

Message was edited by: b j t

D I need the firewall on in my Mac when using Airport extreme base station?

Hi all;
Just wondering if it's necessary to turn on the firewall in my Mac when using the AEBS.
AEBS is connected to the net and then my Mac connects to AEBS.
There's already a firewall built-in as I understand it.
Thanks.

The operation of NAT and DHCP on the AEBS will prevent someone from the Internet directly accessing your Mac.
Enabling the firewall on your Mac would add some protection against someone local wirelessly accessing your Mac.

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

FMLE crashes on MAC when using with an AJA Kona card. Is this card supported?

Similar Messages

Maybe you are looking for