FMS 3.5 - How to use remoting Server Side

I am very interested in using Remoting in order to connect to a Drupal AMFPHP service module. On the client side this is easily done and I have had limited success on the Server side, but a good guide on how to do this properly and be able to get the data being returned would be great.
Thanks,
Chris
ChrisMcIntoshDesigns.com

I don't know if Drupal's AMFPHP implementation is any different than a straight install of AMFPHP, but this article should help to get you started:
http://www.sephiroth.it/tutorials/flashPHP/flashcomm_AMFPHP/index.php

Similar Messages

How to use remote desktop client in mountain lion

How to use remote desktop client in mountain lion.
I want to connect my other system(ubuntu) using mac remote desktop client, But i could not locate remote desktop client in moutain lion.

In Ubuntu 12.xx use Dash to find "Desktop Sharing" and set the preferences, including requiring a password.
Then in Ubu use System Settings > Network to determine your Ubu machine's IP address, such as 192.168.1.13.
On the Mountain Lion Mac do Finder > Go > Connect to Server and enter: vnc://192.168.1.13 or whatever your IP is. Enter the password that you used in the Ubu Desktop Sharing setup, when asked.
On the Ubu machine answer the question that pops up asking for permission to connect. Your Ubu screen will now show up on the Mac, and you can remote control it. Here I am running "Octave" (a math program) on the Ubu machine, remotely.
Works great! BTW, you can do this from an iPad too, using a VNC client such as Mocha VNC Lite. You can even run both remotes simultaneously.
Good luck.

How to use "DHCP Server"?

Hi,
I don't know how to use DHCP Server.
#Features > Networking > Network Management > DHCP Server
There seems to be no item to setting a DHCP Server in the Administrative Tools.
Is there function to which installation is necessary to use DHCP Server.
Thanks,

DHCP server role is typically for Windows Server, but you can get some DHCP capability when you enable Internet Connection Sharing -http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/make-windows-7-act-as-a-dhcp-server/8ff345f2-99b5-4670-bb6f-32d7bb63de3c
Sean Liming - Book Author: Starter Guide SIM (WEI), Pro Guide to WE8S & WES 7, Pro Guide to POS for .NET - www.annabooks.com / www.seanliming.com

How to install owb server-side software on UNIX Solaris (SPACR-64)?

Hi there,
How to install owb server-side software on UNIX Solaris (SPACR-64)?
I've read the install guide
and it mentions
3. Start the installer by entering the following at the prompt:
cd mount_point
./runInstaller
I don't have access to any graphical interface on the UNIX box e.g. x-windows nor any cd with the software, just the solaris software downloaded from web - does this include the runinstaller
and is the runisnatller just a command line interface?
I hoped I would be able to download the software from oracle website and then simply run the a setup scrip?
Is it possible to do this? Would I simply substitute cd mount_point to cd <directory I put software)
I've never ran oracle universall installer on UNIX before.
Many Thanks
Edited by: user575470 on Feb 15, 2009 7:54 AM
Edited by: user575470 on Feb 15, 2009 8:06 AM

Hi,
You can install the server-side software from the downloaded software.
You don't need the CD
You do need an X-windows client on your computer to connect to the server OR work directly on the server.
Without X-windows you cannot start the Oracle Universal Installer.
Maybe there is a command line installation, I have never used this.
I hope this helps.
Regards,
Emile

How to read a server side file in Applet?

When I used ZipFile like this,
ZipFile zf = new ZipFile("http://xxx.com/res.jar");
It throwed exception about access denied, File pemission...
How to read a server side file in Applet?

You generally can't tell with Stream how many bytes are going to be available. You could download the whole thing into a ByteBuffer, for example, and process it from there.
Or you can try opening an http connection explicitly (using URL and casting the connection to HttpURLConnection and see if there's a "Content-length" header.

How to run the Server Side Existing rule in Exchange 2010

Hi All,
There were requirement to create a auto forward rule for almost more than 5000 users, which we did, but the we want to apply this rules to the messages which are already in the inbox for all those users where we have created the rule.
Right now the problem what we are facing is for each individual we have to take full access to their mailbox and execute the rule first time and then it works.
this is becoming challenging for us to making this for all 5000 users. the other problem is those user are not regularly login to this mailbox, they are using some other Org mailbox, so even we can not communicate to all of them.
Q1) How to run the Server Side Command which should forcefully apply whatever rules is created for that user should execute for the messages which are already in the inbox.
Q2) or the powershell for for specific rule name, which can apply on the for all the messages which are there in the inbox.
Any help would be appriciated!
Thanks in adv champions!
Ashku

Hi Ashku,
If these 5000 users are all users in your Exchange organization, a inbox rule can be created by the following commands:
Get-Mailbox | foreach {New-InboxRule -Mailbox $_.Name -Name AutoForward -From [email protected] -ForwardTo UserB}
Based on my test, the Inbox rule created in server side also cannot work on the message that have already been in the Inbox unless users click “Run Rules Now…” in their Outlook client. And the transport rule in Exchange server only works
during the message sending process.
Therefore, there may be no feature in Exchange server side to meet your requirement.
Thanks for your understanding.
Thanks,
Winnie Liang
TechNet Community Support

Accessing LCDS Persistence Layer for use in Server-Side Business Logic

Within server-side business logic, I want to be able to get a persisted object from LCDS, manipulate that object, and then use LCDS to persist those changes to the database as well as send those changes to the client.
Is it possible to access LCDS' persistence layer (Hibernate) to be used by server-side business logic?
I have attempted to use DataServiceTransaction.getItem(...). However, for objects that contain a collection of other objects I get this error:
[LCDS] Runtime exception while trying to fetch a property from hibernate: flex.data.DataServiceException: There is no current message broker to return.
When calling DataServiceTransaction.updateItem(...) for objects that contain a collection of other objects, I get this error:
org.hibernate.LazyInitializationException: failed to lazily initialize a collection of role: com.sd.pojo.Book.chapters, no session or session was closed
Also, it appears that DataServiceTransaction.updateItem does NOT update the database?
I have resorted to building my own Hibernate SessionFactory, but that seems unnecessary.
One other piece of information is that I am using the Fiber modeling tool to build and deploy the model to the server. I am generating the Java classes with Fiber and making them available to be used on the server.
Thanks,
Collin

Thanks for the help guys.
I guess what I'm really trying to get straight in my own mind is whether supporting interraction and control of eJB database interraction is still using the same functionality as having a stand alone app interracting with a db.
I'm thinking about; the implications of using eJBs specific query language and the different way in which eJBs use db connections (either for the period of their lifetime or just for the duration of one interaction) compared with a stand alone app, which would maintain a connection to the database(s) while it is open.
Connection pooling and caching of DB objects is often quoted as being a middle tier activity, but what does this mean when all 3 tiers reside on the same machine?
Once again thanks for your comments and advice.
Mark

How to use remote JMS in websphere5?

I want to use JMS in another server to send message so that I config required jndi in server. When I lookup local JMS jndi(connection factory, queue) it works correctly. But when I lookup remote connectionfactory, it throws 'javax.naming.CommunicationException'. BTW, local configuration is same as JMS server. And I use WSAD 5.1.1 to develop it.
The first question is if I need use JMS server on another server, I should lookup remote queue and JMS connection factory on that server, right?
The second question : If yes, how to obtain remote JMS connection factory? I use WSAD 5.1.1 trail, I don't know is it possible to obtain remote jndi.
The third question : do I need change any configuration for supporting remote JMS client instead of local(same compute, different jvm) environment?
The following is my client code to obtain remote queue:
public class Test {
     public static void main(String[] args) {
          Properties env = new Properties();
          env.put(Context.INITIAL_CONTEXT_FACTORY,
                "com.ibm.websphere.naming.WsnInitialContextFactory");
          env.put(Context.PROVIDER_URL, "corbaloc:iiop:10.240.4.203:2809");
          try {
               Context initialContext = new InitialContext(env);
               Object obj = initialContext.lookup("jms/IPharmQueue1");
          } catch (NamingException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
}It works ok when ip is localhost. But it can obtain remote queue or connectionfactory. I tried to lookup other EJB, it also failed.

Actually, I have application in one server and four same server as cluster. But only one server provides JMS service. So my application need to use remote JMS server instead of local server. But in my development environment I can not simulate cluster environment as customer environment. So I try to let my application access remote JMS server in different computer. When two server start up I found my application will get local JMS connection factory and queue instead of remote factory. Even I put IP of another computer in PROVIDER_URL.
I did a application client to test it. The code is above. But it can not lookup remote jndi.
I use WAS5 as server and WSAD 5.1.1 as development IDE.
Is any idea about it?

How to use Remote key for linking two repository

Hi,
I have a challenge like not to repeate common tables like Company_code,Currency,Vendor name,customer name across all repositories.
Is there any way I can use 'Remote key' to link different repository.
I can create a Main table with all common attributes required across the repository but want to know how I can connect it to different repository.
For example to get company-code in Vendor table , how can I link Company-code main table(customized) in another repository may be thru 'Remote key'.
Going thru java api route is not prefffered for the sake of simple solution.
Appreciate your help in providing any idea and detail steps for the process.
-regards, Reo

could you confirm the name and the existence of this file "IOMM_20121213_060736.csv" ?
same error like:
http://www.oracle-base.com/articles/9i/external-tables-9i.php
if the load files have not been saved in the appropriate directory the following result will be displayed.
SQL> SELECT *
2 FROM countries_ext
3 ORDER BY country_name;
SELECT *
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file Countries1.txt in EXT_TABLES not found
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1Edited by: Fran on 10-ene-2013 23:32

How to use Weblogic Server 6.1 build.xml with ant

Hi Java's
I have downloaded the latest version of BEA Weblogic server 6.1,they have changed the build.cmd to build.xml for compiling and building the ejb applications.they are telling that we have use $ant to run the build.xml but i couldn't able to do that.i'm getting "command not found error"..i'm using winnt.please help me how to use $ ant.Is it a seperate exe or batch file that i have to download ?if so where to download it.how to use it.please help.
Regards
Balaji

To use it after installation, set your path to your
<ant_installation_dir>\bin, then navigate to the diectory containing the build.xml. then follow the instructions in the weblogic documentation for running ant.

How to use Remote Debugging in JDeveloper 3.1 ?

I am trying to use the Remote Debugging option with EJBs in JDeveloper 3.1 with Oracle8i 8.1.6.
I checking all steps the online walkthrough for Remote Debugging EJB in 8i and it didn't work.
I'm using Oracle8i EJB/CORBA debug option in project properties, but it does not stop in my EJB's break points.
I tried deploying the EJB again ( with break points) and again it didn't work.
The error message I got in the trace file is:
Errors in file D:\Oracle\admin\SCT\udump\sctS000.TRC:
ORA-29516: Aurora assertion failure: Java thread deadlock detected
Could someone please tell me how to use it?
null

Which platform is the database running on ??
Other things you should check -
when debugging the EJB, JDev
3.1 looks through your IIOP connections to find the one to use.
Make sure that the IIOP connection that JDev is using for the debugging matches the IIOP connection that the EJB client application is using.
raghu
null

How to use VM server's disk space to store VM?

Hi!
I've installed Oracle VM Server on my Sun Server. The server has 4 hard drives, which are combined in RAID 10.
The final disk space is approximately 600 gigabytes. This is df command's output:
Filesystem
Size Used Avail Use% Mounted on
/dev/sda2
50G 1.2G   46G   3% /
tmpfs
666M     0 666M 0% /dev/shm
/dev/sda1
477M   47M 401M 11% /boot
none
666M   40K 666M   1% /var/lib/xenstored
For the needs of the server uses about 50 gigabytes of disk space.
Oracle VM server Installation and Upgrade Guide says:
Partitioning is performed automatically by the installer, and you do not have
the option to define how partitions should be created on the drive during the
installation process. Partitions are created in such a way that only the maximum
amount of disk space required to run Oracle VM Server is attributed to the
partition where it runs. A separate partition is created for any remaining disk
space to be used as a discoverable local disk that can be used to host a
repository or assigned to any virtual machine that runs on the Oracle VM Server.
So where is this separate partition, that I can use to server pool and storage repository in OVMM?
I want to use free disk space to share it using NFS. Later I use these NFS shares to create server pool and storage repository.
Thanks!
Konstantin

Hi Konstantin,
you should not use a OVS to export NFS shares to create a server pool or storage repo on it. Such shares should come from a dedicated NFS server, especially, if you plan on ever configuring a sever pool with multiple OVS. The point it, if you're using an OVS to act also as the NFS server for your server pool and storage repo, you will make it impossible to restart that one OVS, due to tha fact that you'd blow up your OVM cluster.
If you only want to run a single server pool, then nothing prevents you from usind fdisk on the OVS itself and claim the remaining drive space, by making it available as a /dev/sda3
Cheers,
budy

How to use SQl server 2005's SQLXMLBulkLoad with JAVA

Hi All,
I am in a big problem identifying how to use xml bulk insert functionality of sql server 2005 with java.
I need to enter millions of data into the sql server 2005 database.
All the material i saw on net includes vb script or asp.net sripts to do so.
Somebody please tell how I can do this with JAVA.
Thanks.

In this forum we commonly discuss connections from Oracle to foreign databases. When you want to connect with your SQL Server to Oracle it would be better to ask that in a Microsoft forum as they support their LINKED SERVER mechanism.
The linked server set up is for example described in the Microsoft knowledge base as:
280106 - HOW TO: Set Up and Troubleshoot a Linked Server to Oracle in SQL Server
In newer SQl Server releases the name changed see for example:
How to run a SQL Server 2005 Integration Services package as a SQL Server Agent job step
View products that this article applies to.
Article ID : 912911
As you can see they are commonly using OLEDB driver. So you might have to install Oracle's OLEDB driver as well. Else you might think about using OLEDB to ODBC bridge

How to use iCal Server with clients?

Ok, so since I can't find this anywhere... How do I use iCal Server with other desktop clients? I've selected the user, enabled calendaring, the user can authenticate in web-based group calendars. But then I'm stuck.
How do I give them their own calendar?
In iCal, I go to Accounts and try and enter the info but it fails every time. I tried the dns name like so: "calendar.example.edu" but it generates an error. But the user can log in to the web calendar for groups. Where is the users individual calendar located?
The help menu ignores that field as if it's not needed, but then it fails because the calendar doesn't know where the server is. The clients can't all be OD bound, so this has to work outside of Open Directory. According to Apple other CalDAV clients can connect too. How? Computers just don't "connect" on their own.
Anyone know the answer?

I was getting the same error when I tried to subscribe to a calendar using:
Subscribe to: http://myserver.example.com:8008/
principals/users/usershortname
I found that if I added a trailing slash to the URL then it would work :
Subscribe to: http://myserver.example.com:8008/
principals/users/usershortname/
(the way I found this was to navigate via the web browser to http://myserver.example.com:8008 then authenticate as a user, then navigating through to http://myserver.example.com:8008/principals/users/ where you can see all the user names all with a trailing slash after them)
hope this helps
Message was edited by: maximumjack

How to use remote directory for external table

Hi Folks,
I have 2 Oracle 11GR2 64 bit database installed on Win 2008 server as prod1 and prod2.
I have one directory created on prod1 server as EXT_TAB_DIR using the path as D:\OrsDWtest_dir .
I want to use this directory in Prod2 server and use external table using this remote directory.
I am able to access the Prod1 directory from Prod2 machine and also i have created Network map drive as Z drive pointing to that prod1 D:\OrsDWtest_dir directory. Also i checked read and Write permissions are there . I am able to create the external table but when i try to fetch the data i m getting below error ..
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file IOMM_20121213_060736.csv in EXT_TAB_DIR not found
now my doubt is this possible ? Can we use remote directory for External table ? or is there is there any alternative way to achieve same ?
Thanks & Regards,
Vikash Jain(DBA)

could you confirm the name and the existence of this file "IOMM_20121213_060736.csv" ?
same error like:
http://www.oracle-base.com/articles/9i/external-tables-9i.php
if the load files have not been saved in the appropriate directory the following result will be displayed.
SQL> SELECT *
2 FROM countries_ext
3 ORDER BY country_name;
SELECT *
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file Countries1.txt in EXT_TABLES not found
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1Edited by: Fran on 10-ene-2013 23:32

FMS 3.5 - How to use remoting Server Side

Similar Messages

Maybe you are looking for