Folder issues after restoring Catalog file

Just upgraded from LR 3 to 5 after a drive failed. I did a new install of LR 5 on the new drive. I'm on an iMac running OS x 10.9.1 (Mavericks). I restored the previous Catalog file & all my previous thumbnails & accompanying folder structure is intact, but now when I import new photos to existing folders, a new version of that folder shows up in the Library at the root level. In Finder all the photos show up in the right folder, but in Library mode LR doesn't seem able to use the existing folder structure.

I have never had a restore disc that had the correct drivers in it, and this is another case of that.
That software had been tested pretty thoroughly and then distributed to tens of thousands of customers. Bugs found since are reported in the Support Bulletins here.
Locate a Toshiba Service Center
There's no way I can help more.
-Jerry

Similar Messages

After restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

after restoration of files via time capsule my status changed to "Guest" and I can't find the pass word for changing it back to Registered user. Any Help?

Hey mate I had this same problem exept instead of my recording disappearing my Chorus that went for 8 bars extended out to 20 bars lol and I used auto tune on it and it sounds like t-pain on a very bad day so it sounds like it does a few things when it comes up that error

Home Folder Issues after data drive move.....

Hello All,
I have a Mac OS X Server Leopard (latest version) that we have had running without too much troubles for some time now. When we ran out of space, I added a new large hard drive into our xServe and dittoed the user home folders to the new drive. I unshared the home folder file on the old drive, and then setup an identical share on the new drive. When users login on the mac, the system finds the home directory on the new drive fine, no issue.
The problem arrises when the user does a connect to server request. Their home folder comes up in the list and they mount the drive. However this share-point seams to be the folder still on the old drive. I have now deleted the folder containing the user home folders on the old drive, but it simply gets recreated when as user does a connect to server request. This folder is not longer shared and I can't understand why it still comes up with this old share point.
It is not a huge issue, but rather annoying.
Any ideas would be great.
Thanks
Michael

Functionality for customized setups may differ slightly with a new os. Power cycling the device daily is always a good idea for maintenance.
I don't really consider having groups of icons on my home screen a customized setup. This is a native feature of the Android OS and something on the update caused this issue. I've been running 4.3 on two other devices (Nexus 7 and Sprint Galaxy S4) for months and I've had zero issues. If I didn't use folders I would need to fill up 3+ home screens just to have enough space for the apps I have on my main home screen. I have an identical setup on the Sprint Galaxy S4 (test phone for work) that is running 4.3 and I don't have this issue.
Second, are you officially saying that rebooting an Android device on a daily basis is a best practice? I typically reboot my phone every couple of weeks, but daily seems a bit excessive. Since the update I have to reboot at least once every 2-3 hours during the day to resolve the folder issue. It's the first thing I have to do in the morning to be able to access any apps that are within a folder.

Web Sharing issue after restore

After restoring my imac from a time machine backup recently, everything is working great apart from my Web Sharing.
I used to go to http://localhost/~username, that just gives localhost, server not found.
I can still connect to the mysql server at localhost, but any attempt to browse any of my created sites comes up blank and looks to be a possible apache problem as http://localhost is also blank.
In sharing prefs, web sharing is on, I've turned it off and on again. The weird thing is that where it previously would say http://localhost/~username it not says http://codename.lan.
Connecting to this doesn't work surprisingly so I don't know what to say!
Any starting places would be most welcome!

at http://discussions.apple.com/thread.jspa?messageID=8768900&#8768900
Thomas Flaherty wrote:
Seems that a directory /var/log/apache2 was not there after the restore
sudo mkdir apache2
chmod 755 apache2"
the owner/group should be root/wheel
This solution worked for me, try it.

Activation issues after restore and OS upgrade

IPAD was disabled. Only option I had was restore. After restore, it offered to upgrade the OS which I accepted. Now, Activating IPAD requires my apple id which is ******@icloud.com. I don't even remember creating any account on icloud.com. I have tried to retrieve it unsuccessfully from Forgot Apple ID link. Any suggestions? workarounds? Many Thanks in advance.

You will not be able to re-activate your iPad if you do not remember the old Apple ID and Password.
This is the new security feature of IOS 7.

Issue after restoring of DR db into QA db

Hi Gurus,
Recently we have cloned DR server and restore it to QA server (including oracle) for testing purpose.After restoration of DR (physical standby) db into QA, I have re-started the db but database open in read only mode.
My requirement is to change read-only mode to read-write mode so that we can perform testing on QA database.
Database version is Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - 64bit on windows 64bit.
Can we convert read only mode to read write mode?Is this possible? or Do we need to break dataguard?
If possible , how to do it?
Please provide me steps to convert read mode to read-write mode.
Thanks,
Meena

This is a backup of your DR database...so you wouldn't need to break dataguard or make any changes on your prod or DR databases.
Just activate this copy of your standby.
ALTER DATABASE RECOVER MANAGED STANDBY DATABASE FINISH;
ALTER DATABASE ACTIVATE STANDBY DATABASE;

Elements Organizer - Perte arborescence des dossiers après restauration   /    Lost folder tree after restoring files

Bonjour,
Je viens de réinstaller Windows 7 et ai installé mes logiciels (en particulier "Adobe Elements Organizer V12") .
J'ai ensuite fait une restauration de mon catalogue à partir d'une sauvegarde externe.
Cette restauration s'est bien effectuée, mais un problème subsiste.
En effet mes photos sont maintenant chacune dans des dossiers séparés et je n'ai plus l'arborescence initiale des mes dossiers.
Par exemple, j'avais avant un dossier "Anniversaires" avec des sous-dossiers "2013", "2014" etc.
Maintenant j'ai les dossiers "2013", "2014" mais je n'ai plus le regroupement dans le dossier parent "Anniversaire".
Compte tenu du nombre de photos concernées, je voudrais retrouver mon arborescence de dossiers.
=> D'où ma question :   comment faire ?
Merci pour votre aide
   alaincln57
Hello,
I just reinstalled Windows 7 and installed my software (especially "Adobe Elements Organizer V12").
I then did a restore my catalog from an external backup.
This restoration was well done, but the problem remains.
Indeed my photos are now each in separate files and I do not have the original tree my files.
For example, before I had a "Birthday" folder with subfolders "2013", "2014" etc.
Now I have folders "2013," "2014," but I do not have the combination to the parent folder "Birthday".
Given the number of relevant photos, I would find my folder tree.
=> Hence my question: how?
Thank you for your help
    alaincln57

Le dossier est sur le disque E (qui est mon disque de données). C étant bien sûr le disc Système.
J'ai choisi un emplacement personnalisé pour les catalogues.
En fait, j'ai voulu simplifier dans mes messages précédents en parlant du Catalogue 1.
Mais j'ai en réalité 3 catalogues.
Je viens de restaurer les 3 et curieusement il ne se passe pas exactement la même choses pour chacun.
Toutefois j'ai bien un affichage et un "fonctionnement" correct d'Organizer pour les 3.
Dans le dossier que j'ai créé pour y placer mes catalogues, j'ai les sous-dossiers suivants :
- Catalogue 1
- Catalogue 1 1
- Catalogue 2
- Catalogue voyages 1
- Catalogue voyages 1 1
- Photoshop avec TOUTES les photos restaurées correspondant aux 3 catalogues (sous-dossiers : Photos 1, Photos 2, Photos voyages 1)
- ProgarmmeData.
Si je regarde le sous-dossier Catalogue 1, je vois qu'il est PSE10DB (donc c'est un "reliquat" de la conversion de V10 à V12). J'en déduis (peut-être hâtivement) que ce sous-dossier ne sert à rien... J'envisage de la supprimer.
Catalogue 1 1 est PSE12DB, donc OK. Idem pour Catalogue 2 et pour Catalohue voyages 1 1.
Par contre Catalogue voyages 1 est PSE10DB. J'envisage donc de le supprimer également.
Il me suffira ensuite de renommer les catalogues "1 1" en "1" avec Organizer pour retrouver ma situation d'origine.
Le sous-dossier Photohop s'est créé tout seul.
Il contient les photos restaurées.
Je pense utiliser Organizer pour les déplacer et les remettre dans le dossier que j'utilisais avant restauration.
Quant à ProgramData, il y a une assez longue arborescence et concerne uniquement les 2 catalogues "1" (et non pas "1 1").
Comme ces catalogues sont maintenant obsolètes, ce sous dossier peut (peut-être) être supprimé ?
En résumé, j'ai l'mpression que la conversion de V10 à V12 il ya quelques mois c'était peut-être pas très bien passée et à laissé des séquelles.
J'espère avaoir été clair...
=> Merci de me confirmer les actions que je peux (et dois) effectuer sans risque.
Cordialement

Mail Enabled Public Folder Issues after migration online

Hi
We have recently migrated our Legacy (Exchange 2010) Public Folder Infrastructure to Exchange Online - we have a hybrid setup, SSO and DirSync.
We initially had an issue where some of our mail enabled public folders had lost their link with the associated MailPublicFolder objects and as such could not receive email.
We resolved this issue ourselves however we are now experiencing a different issue which i believe should be easily resolvable however this isn't the case at the minute.
The issue is that when a user emails a Mail Enabled Public folder Exchange online is attempting to relay the email back to our onPrem servers. This is occuring for the bulk of our Mail Enabled Public Folders - we have ~1200 of these. The only
folders that are working as expected are those that had the initial issue above and for which we had to remove and re mail enable these folders. We also had to recreate any secondary smtp address for these folders. This accounts for 88 of our total
MEPFs.
I have checked the attributes on the MailPublicFolder objects for those that are not working and those that are functioning as expected. The only difference in these that I can see is that the MEPFs with the issue have a value set in the ExternalEmailAddressAttribute.
I have tried to programatically set this value to $Null however i receive the following error:
The external e-mail address $null is not an SMTP e-mail address.
I have also tried the following : set-mailpublicfolder -Identity "MEPF"-ExternalEmailAddress "<not set>"
with the same resultAttempting to use the following syntax -externalemailaddress @{remove=$oldAddress} returns the following error:
Cannot process argument transformation on parameter 'ExternalEmailAddress'.Cannot convert the "System.Collections.Hashtable" value of type"System.Collections.Hashtable" to type "Microsoft.Exchange.Data.ProxyAddress".
At present the only fix that I have for this is to take a copy of the email addresses for an affected public folder, Mail disable it, wait for the object to be cleared, re-enable the public folder as a mail public folder and then re-add the email addresses.
This is ok on an adhoc basis but not for the ~1200 folders that are affected. Especially when from what i can see it should be relatively straightforward to resolve this with a simple PowerShell script.
I do have a case open with MS for this but I am hoping that somebody here can help also.
Thanks
Joe

Ok so i fixed it myself.
The thinking here is that the ExternalEmailAddress was set using the Primary SMTP address while the Public Folders were on premises.
In order to get the required information we ran a script to export all the MailPublicFolder objects which had a value in the ExternalEmailAddress attribute. We exported the Name, ExternalEmailAddress and GUID
We then ran a second script to export the Identity, MailRecipientGuid from Get-PublicFolder -recurse.
The MailRecipientGUID is what ties the Mail Enabled Public folder to the MailPublicFolder object.
Using Excel I then matched the two up and created a csv file with the Identity Attribute from the get-PublicFolder command and the ExternalEmailAddress Attribute from Get-MailPublicFolder.
The following script then used this csv file to first Mail Disable the Public Folder, then Mail Enable the Public Folder.
Once these steps have been completed the final stage is to add the SMTP address back in to the Public folder.
To do this it is necessary to retrieve the new MailRecipientGUID and use it to return the MailPublicFolder for the Set-MailPublicFolder command.
I was happy to use this script after i tested with a small subset of the data. It is provided as is with no guarantee that it will be suitable for you to use and any use of this script is at your own risk.
Script to Automatically fix brokenn Public Folder Objects
Created By: Joe McGrath
Created On: 18/02/2014
$Path = "C:\PublicFolders.csv"
import-csv -Path $Path | ForEach-Object `
Disable-MailPublicFolder -identity $_.Identity -Confirm:$False
Write-Host "Broken Public Folders Now Mail Disabled"
Write-Host "Waiting for commands to be fully processed online - the script will continue in 5 minutes"
Start-Sleep 300
Write-Host "Re MailEnabling Public Folders"
import-csv -Path $Path | ForEach-Object `
Enable-MailPublicFolder -identity $_.Identity
Write-host "Broken Public Folders now enabled"
Write-Host "Now waiting to allow online service to catch up - script will continute in 5 minutes"
Start-Sleep 300
Write-Host "Updating email addresses for broken public folders"
import-csv -Path $Path | ForEach-Object `
$NewPF = get-publicfolder -identity $_.Identity
Write-Host $NewPF.Identity
Write-host $newPF.MailRecipientGuid
$EmailAddresses = $_.AdditionalEMailAddresses
$NewMailPF = get-MailPublicFolder -resultsize unlimited | Where-Object {$_.Guid -eq $NewPF.MailRecipientGuid}
Set-MailPublicFolder -identity $NewMailPF.identity -EmailAddressPolicyEnabled:$FALSE
Set-MailPublicFolder -identity $NewMailPF.identity -EmailAddresses $EmailAddresses -EmailAddressPolicyEnabled:$FALSE
Set-MailPublicFolder -identity $NewMailPF.identity -EmailAddressPolicyEnabled:$TRUE
$EmailAddresses = ""
Write-Host "Completed!"

After Restoring/Backup File System XI Java Instances are not up!

Hello all,
We are facing problem in restoring the SAP XI System, after taking backup of the system the java instances in SAP XI System are not starting again. ABAP connections are fine.
Can anyone provide suggestions/solutions in order to restore the XI System back.
The system information is as follows.
System Component: SAP NetWeaver 2004s, PI 7.0
Operating System: SunOS 5.9, SunOS 5.10
Database: ORACLE 9.2.0.
Regards,
Ketan Patel

I would correct Oracle version is 10.2.0
I would also like to reframe my problem.
XI server(both abap and Web) was working fine. Every weekend we take full backup(file system+DB)(UFS) of server. After taking backup server got up and we were able to login through abap but java web page was not openning. We did some troubleshooting it didn't work and finaly we restored the backup and somehow it worked. Next week after backup again same problem arose. We again restored latest backup but this time problem still exists.
Regards,
Ketan

Photoshop Elements 13 Restoring Catalog / Files Not Able To Be Restored

I backed up my catalog from an older Photoshop version using the backup to hard drive option. Then I restored my catalog to Photoshop Elements 13 on a new computer, but had files not able to be restored. Does this means they are in my catalog but missing links to the actual files or not in the catalog at all? & is there something I can do differently to try the restore again without this happening? Thanks!

Hi,
See if this helps.
Convert Organizer catalogs for 64-bit versions | Photoshop Elements 13 or later
Brian

TS3682 how do you restore your old ipod file after restoring new file?

how do your restore your old ipod back onto your ipod file after acidently losing your new ipod file

i mean that i got a new ipod 5 generation but then since my ipod forth generation was still on itunes, i accidently replaced all the info from my 5 generation and replaced it with the info from my fourth generation by clicking restore backup

Strange Folder appears after restoring Backup

After suffering a disaster and cloning my backup back to my PowerBook, I noticed a folder at the root level named "bin" which contained a bunch of generic docs all of whose names begin with mw. It also contains a folder named Desktop but is not really the Desktop folder for my home folder.
I believe that bin is the name of one or more invisible folders in the System folder. Can anyone explain how it appeared at the root level of my hard drive?

Yes, I know. And the OP stated that he was confused by this because "I believe that bin is the name of one or more invisible folders in the System folder", so I've clarified that there is nothing wrong about bin being at the root level, that that's where it should be. What did I misread?

PLEASE HELP! Weird Issue after Restore

I had to do a restore on my iPhone. I'm in India right now and everything seems to be working fine, but I keep getting an error message at startup that says
"Waiting for AT&T activation
This may take some time."
It gives the option to dismiss, but why is this message even showing up? My phone number shows up properly in iTunes and the phone recognizes that I'm activated properly. I don't get it.
Is this going to show up every time I start the iPhone?

Did you do the restore here in US or in India? That SIM card is looking for at&t service and since it is not available there it gets stuck in that endless loop. Try to put it in airplane mode and see what it tells you. All I can say is just cancel it and sync as you would normally do. Watch out for a huge bill IF you are making calls. Hope you realize that and don't be surprised when the bill arrives.Read up on some of the stories other users here have posted on that issue.

Software issues after restoring from Time Machine backup.

Hi all,
I recently had to do a full restore from my time machine back ups. Everything worked flawlessly and when the restore was done, I appeared to have my OS, apps and data all the way they were prior to the failure.
Now I'm experiencing strange behavior from some of my applications.
First, when I use Safari’s "Top Sites" feature it shuts down the application with no associated error message.
Second, when I attempted to launch MS Word, I received an error stating that there was a problem with the Office database and it instructed me to use the included db repair utility (I'm sorry, I'm at work and I don't have access to the actual error messages at the moment). I did this, and after some time it reported the same error.
I shrugged my shoulders and used the included uninstall to remove Office from my machine and then re-installed. After the install was complete I launched Word and got the same error.
Is there any history of applications behaving strangely after a Time Machine restore? How can I totally remove MS Office such that whatever db the error references is gone as well?

The hard drive was bad. The OS locked up after trying to load iTunes. I rebooted and after the reboot everything ran very, very slowly. After several reboot attempts, the machine would not boot past the grey apple screen. I attempted to use /sbin/fsck -fy to repair and after running that several times (with varying outputs but all stating that the disk could not be repaired) I eventually was getting the same output over and over with a statement that no repair could be made.
I then bought Disk Warrior and ran it against my iMac using my wife's MacBook Pro. Disk Warrior returned a similar error stating that the disk couldn't be repaired.
Finally, I decided to re-install the OS and restore from back up but after several attempts to re-install the install would invariably fail after the consistency check of the DVD had completed and the install was to begin. It said something short like "There was an error with this install. Please try installing again." At this point, I surmised that the disk was a lost cause. I had the hard drive replaced and then restored from my Time Machine back up.
After the change in hard drive, the OS install ran just fine and the restore ran fine as well.
Thanks!

Download multiple issues after restoring purchases in Newsstand

Is there a way to download multiple magazine issues within one publication to the iPad. I restored purchases in Newsstand and it has the cloud icon on the purchased items. I want to select/download all the purchases I made instead of individually. Is there a way to do this?
Thanks

Are there known problems with iOS8? Are they working on fixes? This is bad!

Folder issues after restoring Catalog file

Similar Messages

Maybe you are looking for