Folder path for developing custom UI in SAP OEE

Hi,
recently I was developing in a scenario where I need to add a custom UI in OEE Dashboard. For that I followed the SAP How to guide for Custom UI. As per the guide I developed the view.js file controller.js file and then set them in activity configuration. It was stated in the how to doc that we have to put upto the name of the view page not the extension. Interestingly I found one thing here.
OEE always expects a folder path for that view file is such a way http://<host>:<port>/<Project name>/Web/WebContent/customActivity/<View page>.
Main problem to use that is, we can't add any specific folder in between any of the folder and even we can't change the name of the folder. I have tried with "customactivity", it didn't work.
I think this kind of limitation anyone can't expect while developing. I just post this here to explore that if I am doing anything wrong or that is a issue. Another point is in the how to doc it is not mentioned anywhere.
Thanks and Regards,
Suman

Hi All,
This is for everyone's update.
I have raised this point to the SAP, they have sent the confirmation that they have wrote their logic in such a way, so we have to mention the same path while developing any custom UI for SAP OEE. But as per my understanding it is kind of limitation they are giving.
So the standard path to keep the custom UI code for any SAP OEE Custom UI is :
http://<host>:<port>/<Project name>/Web/WebContent/customActivity/<View page>
Regards,
Suman

Similar Messages

  • Where do I get the Gateway SDK for developing custom Filters?

    Hi,
    Where do I get the gateway SDK for developing custom Filters?
    Regards,
    Earnest A Thomas

    Hi,
    There is not actual SDK to download, its in your installation already. The JavaDoc of all classes are in \doc.11122\javadoc in the ZipFile, http://download.oracle.com/docs/cds/E50612_01.zip (From page: Oracle Enterprise Gateway). There is an online documentation including a tutorial at http://docs.oracle.com/cd/E39820_01/doc.11121/gateway_docs/content/general_filter.html
    There should be some simple pre-made filters with source code somewhere but I think you might need to contact support to get your hands on those as I can't find them.
    Cheers,
    Stefan

  • Does anyone know the default installation folder (path) for Adobe reader 11?

    Does anyone know the default installation folder (path) for Adobe reader 11?

    This forum is only for discussions on the forums themselves. The Reader one is here:
    http://forums.adobe.com/community/adobe_reader_forums

  • Query - Replacement Path for a Customer Exit Variable

    Hi
    New to the field and the board.  Any and All help is greatly appreciated.
    I have created a query which runs based on a date selection. The query have few customer exit variables whose values are set in ABAP. All Key Figures in the query are brought depending on the date ranges that each of the CE returns. Ex - one column is sales for first 10 days, 2nd for second 10 days, 3rd for first quarter, 4th for 2nd quarter and such.  There are about 20 - 25 columns with KF in the query and all are Customer Exit date driven.
    The challenge:- Each column heading should have the name of the month. I tried using Replacement Path. But it works when the selection is based on a constant value but not on value based on variable which is a customer exit. Ex - If I say restrict Cal/Month for July 2013, the replacement path for the Col Heading works fine. But if I say restrict Cal/Month for "ZVAR_SecondQtr_First_Month" the replacement path doesn't work.
    Help Please
    Thanks
    Vidya

    In the text variable that you are using , i guess you have a replacement path. In this instead of using your characteristic for specifying how the value has to replace, use the variable option and give the variable name there
    http://help.sap.com/saphelp_nw70/helpdata/EN/43/565cd22fc95f6ce10000000a1553f6/content.htm
    Hope it helps
    Regards,
    Rathy

  • Path for Pictures,Logos stored in SAP Server ??

    Dear All,
             I am Preparing a Z report for that I want to Import Logo.
             I hv already stored the Logo in SAP Server with SMW0, but for downloading that logo 2 Excel Application I want the path (URL) where it is stored.
            Can anyone guide me where I can get the Path of the pictures stored in SAP.(Database or Application Server).
    Thanking and with best regrads,
    Narendra

    Hi,
    i have not figured it out completely. But i think you can find it in transparant table STXBITMAPS.
    An old (obsolete) way of storing graphics is in tables STXL/STXH
    succes.
    Gr., Frank

  • Any Best Practices for developing custom ABAP reports for Portal?

    Hello,
    The developers on our project are debating the best way to develop custom reports and make them available on the portal.  Of these options that we can think of, can you give any pros & cons, or experiences, or other options?
    - Web-enabled Abap report programs
    - WebDynpro for Abap
    - WebDynpro for Abap using ALV
    - Adobe forms
    Does a "Best Practices" document or blog exist on this topic?
    Thanks,
    Colleen

    Re: Using p_trace=YES

  • Tools for Developing/Customizing Forms for Oracle Apps R12.1

    Hi All,
    Could you please help me identify the tools and correct version for developing and customizing Forms for Oracle E-Business Suite R12.1?
    Regards,
    KK

    Also, could you please elaborate your 2nd point regarding template.fmb The Oracle EBS uses a framework. Starting any new (custom) form for the EBS should ALWAYS begin with the template.fmb to ensure your new form has all of the required objects to comply with EBS Forms development standards. You might want to take a look at the Oracle Applications Documentation library. Select your EBS version and then scroll to the Standards section and review the following documents:
    <ul>
    <li>Oracle Applications Developer's Guide
    <li>Oracle Applications User Interface Standards for Forms-Based Products
    <li>Oracle Application Framework Personalization Guide
    </ul>
    Craig...

  • Required JAR's for developing custom adapter modules for PI 7.31 SP 09

    Hello experts,
    I have a new development wherein i have to consume .xlsx files in PI 7.31
    i have gone through a lot of blogs but did not find any relevant JAR's specially for PI 7.31, I am planning  to go for custom module development for conversion of .xlsx file into xml
    so need your help for finding the JAR's for PI 7.31 and also some custom JAVA source code for conversion of excel spreadsheet into XML.
    Regards,
    Sushant.Shinde

    Hi sushant,
    The module key seems correct ffor you. But the blog you shared is cozy. I developed 4 adapter modules using a document. Please refer that.
    And NWDS EHP1 is available you can use that to be perfectly sure on compatibility.
    http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/c0b39e65-981e-2b10-1c9c-fc3f8e6747fa?overridelayout=true
    use the above document to verify the steps you followed-
    Please provide following screenshots
    NWA->configuration->infrastructure->Application Modules-> and search for *xlmodule*
    if you find your module then click on it and at the bottom there will be a window with JNDI Name. Share that JNDI name and use that JNDI name in your Module. (localejbs/JNDIName).
    Also go to NWA->TroubleShooting-> JNDI Browser and see where is your Adapter module situated. I mean under which directory. Either directly inside root/localejbs/ or root/localejbs/sap.com.
    Please verify your steps according to that and redeploy and share result.
    and Go to NWA- Site Map-> find Start & Stop
    In that go to Java Applicaitons Tab and search for your module. It must be started. If it is stopped try starting it.
    Regards,
    Vikas

  • CIM WIM/EIM sql templates for developing custom reports

    Hi there,
    We want to create custom reports from eGReport Database, where I can find the SQL queries are used in the reports are available from Report Console and then I'd be able to develop my custom reports?
    Thanks for your give a look into this.

    In CIM you can find tables including  "_SMY" in their name in reportsDB are holding the reports Data.
    I would suggest to consult eGain PS or Cisco AS while desiging custom queries to get accurate outputs. As some of column names could be confusing to you without Data model guide.

  • Resource for developing custom scripts

    I am looking for a resource to develop some custom scripts in illustrator to automate the creation of production files from design mock-ups.  If anyone is an expert or knows an expert in scripting I would love to connect.

    here's the official documentation
    http://www.adobe.com/devnet/illustrator/scripting.html

  • How to use sub folder paths for external table location parameter?

    is it possible to use one Oracle directory and address multiple files under some OS sub-directories beside that Oracle directory? Like;
    host mkdir /tmp/orcl_dir
    host mkdir /tmp/orcl_dir/fold1
    host mkdir /tmp/orcl_dir/fold2
    CREATE DIRECTORY ext_tab_dir AS '/tmp/orcl_dir';
    CREATE TABLE ext_all_source
        ORGANIZATION EXTERNAL (
           TYPE ORACLE_DATAPUMP
           DEFAULT DIRECTORY ext_tab_dir
           LOCATION ( 'fold1/all_source1.dmp', 'fold2/all_source2.dmp' ) ) PARALLEL 4
        AS SELECT * FROM all_source;
    ERROR at line 1:
    ORA-29913: error in executing ODCIEXTTABLEOPEN callout
    ORA-29400: data cartridge error
    KUP-04076: file name cannot contain a path specification: fold1/all_source1.dmp
    ORA-06512: at "SYS.ORACLE_DATAPUMP", line 19Thank you.
    Message was edited by:
    antu

    Justin is there a way you are aware of at operating system level to teach oracle that it has to access for example 16 different piece of files over a meta file. I saw some definition file like this but I am searching if this is the tools own mapping format;
    $ cat ./CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat
    (object mfile_c_type
    (path "file:OBSOLETE")
    (fs "file://amanos/s01/abinitio/data/prod/mfs/mfs_16way")
    (local_paths 16
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_001/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_002/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_003/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_004/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_005/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_006/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_007/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_008/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_009/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_010/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_011/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_012/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_013/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_014/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_015/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
      "file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_016/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"))or at least a symbolic linking strategy may handle this, but I couldn't figure out how and of course this will have its own costs of course to manage.

  • Why Can't we have JCanvas for developing Custom LightWeight Components?

    Well!
    I am Sandeep - [email protected]
    I am developing a application for showing images
    and Every time I read a new Image ,
    I have to resize the Window 'MANUALLY'
    so that it appears .
    I am showing it on JPanel which is in JScrollPane
    I have tried all invalidate - validate() and repaint()
    on JScrollPane and JPanel also .
    I tried shuffling size of main JFrame also but failed.
    I have resize the JFrame manually to make Inage
    Appear.
    So I created new Object of 'myclass extends JPanel'
    and put it in JScrollPane as setViewportView(...)
    well I dont like to create new object of my
    JPanel-subclass.
    Can u help me.
    Also I tried to use Canvas but as my application
    is in SWING , it overlaps so i want some thing like
    JCanvas ?
    Do we Have It?

    if you're calling the methods on Toolkit to load the image, pass in the component as the ImageObserver. This way when the image is finished loading, it will repaint itself.

  • Steps for Developing Custom Forms in E-Business Suite

    Hi have made many sample forms
    and now i want to deploy that custom forms in ebs
    how can I do it?

    Hi again;
    You can also see:
    Registering Forms in Oracle Apps 11i
    Forms Customization Steps in Oracle Applications
    http://apps2fusion.com/apps/21-technical/44-forms-customization-steps-in-oracle-applications
    Regard
    Helios

  • SAP Tables  for Open Customer Orders and Sales History

    Dear Experts.
    I am looking to get SAP SD related tables for the following,
    1) SAP tables for Open Customer Orders     
    From SAP, I need to get all tables that Contain all open customer orders for products.
    2) Sales History
    From SAP, I need to get all tables that contain the previous month's sales history (shipped customer orders).
    Please Help!!

    hi
    check the following link
    http://www.erpgenie.com/abap/tables_sd.htm
    hope it will help you
    regards,
    sreelatha gullapalli

  • Number for bDocs processed per hour in custom interface to SAP CRM from Tibco

    Hello Experts,
    Could you please let me know the ideal Number for bDocs processed per hour for a interface which has SAP CRM and TIBCO.
    The intent is to use to most easy to scale technology for a custom interface to SAP CRM from Tibco .
    I did check the forums but was not able to get a definitive answer.
    I understand that it is not possible to quantify the exact number of BDocs that can be processed in an hour,but could you please let me know the factors on which it depends.
    Regards,
    Akash

    It depends on type of data you want to process and the size of your hardware.  My rule of thumb is that you should be able to do at least 1 BDOC per second in a worst case scenario or 3600 records for a small size system.  Keep in mind the biggest bottleneck is the database update/lookup times.  A properly sized large system, could do much more volume.  Your best bet is put in the desired transactional throughput into the SAP quicksizer and then work with your SAP hardware partner to approriately size your production box.
    If you already have hardware for production bought/existing, then find out the current SAPS rating for your hardware and then use the quicksizer to determine the target SAPS needed to meet your requirements.
    Take care,
    Stephen

Maybe you are looking for