How to use sub folder paths for external table location parameter?

is it possible to use one Oracle directory and address multiple files under some OS sub-directories beside that Oracle directory? Like;
host mkdir /tmp/orcl_dir
host mkdir /tmp/orcl_dir/fold1
host mkdir /tmp/orcl_dir/fold2
CREATE DIRECTORY ext_tab_dir AS '/tmp/orcl_dir';
CREATE TABLE ext_all_source
    ORGANIZATION EXTERNAL (
       TYPE ORACLE_DATAPUMP
       DEFAULT DIRECTORY ext_tab_dir
       LOCATION ( 'fold1/all_source1.dmp', 'fold2/all_source2.dmp' ) ) PARALLEL 4
    AS SELECT * FROM all_source;
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04076: file name cannot contain a path specification: fold1/all_source1.dmp
ORA-06512: at "SYS.ORACLE_DATAPUMP", line 19Thank you.
Message was edited by:
antu

Justin is there a way you are aware of at operating system level to teach oracle that it has to access for example 16 different piece of files over a meta file. I saw some definition file like this but I am searching if this is the tools own mapping format;
$ cat ./CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat
(object mfile_c_type
(path "file:OBSOLETE")
(fs "file://amanos/s01/abinitio/data/prod/mfs/mfs_16way")
(local_paths 16
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_001/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_002/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_003/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_004/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_005/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_006/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_007/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_008/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_009/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_010/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_011/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_012/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_013/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_014/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_015/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"
"file://amanos/s01/abinitio/data/prod/mfs/parts/mfs_16way_016/mfs_16way/Applications/RDS/CON_PUB/main/CON_xfrm_subs_status_reason_act_lk_20080302.dat"))or at least a symbolic linking strategy may handle this, but I couldn't figure out how and of course this will have its own costs of course to manage.

Similar Messages

How to use independent replacement paths for same KF over several months?

Dear Experts,
I have a query requirement to show KF values for items that meet a condition on another KF for a five month period. I know that I can accomplish this using a replacement path variable on item for one month at a time, however I am not sure how to do this for multiple months in one query.
This is an example:
Month 1
KF 1 > 0 for Items A & B.........so show KF 2 for for Items A & B
Month 2
KF 1 > 0 for Items B & C.........so show KF 2 for for Items B & C
Month 3
KF 1 > 0 for Items A & C.........so show KF 2 for for Items A & C
Thanks in advance for your help!
Kathryn

Ok, Nancy, code copy/ paste did work fine.
what does this mean:
"Change the image in the properties panel to display your new image."
(the image is displaying ok)
NEverthesless, I think I got Murrays old notes.
Here is my new version of Murrays writing, easiest way I think:
You open up a pre-existing html, say Chicago. Then drag over with pointer to the new jpeg you want (Buffalo). It replaces Chicago with the buffalo jpeg, all links work perfectly. Then do a save as called Buffalo.

How to use SMIME in OWA for External Recipeints

Hello,
I am using a hybrid on premises active directory with office 365 environment with AD synced to office 365 using DIRSYNC. We are trying to achieve being able to send encrypted emails to clients using SMIME in OWA. We have
used certutil to import certificates for some internal users which seems to let you send an encrypted email to them. However when creating a contact in AD for the external user and successfully importing the cert (you can see it in the userCertificate and
userSMIMECertificate attribute in the object) we are unable to email the recipient with an encrypted email as OWA cannot find the certificate. Also the internal users certificates appear in theirs entries in the GAL however the external contacts
do not have their certificate included.
Could someone advise me how to use OWA to send SMIME encrypted emails to external recipients. You can't add a certificate to a contact in OWA as far as I can see.
Many Thanks
Paul

Hi,
Please refer to the following article :
http://blogs.office.com/2014/02/26/smime-encryption-now-in-office-365/
Using S/MIME in OWA
In OWA, users can choose different options to encrypt the message and/or digitally sign it using S/MIME.
Hope this helps!
Thanks.
Niko Cheng
TechNet Community Support

How to get sub folder path

I am trying to get sub string from a string with powershell
$completeString = "C:\Development\Work\ABC-SharePoint\ABC\css\ABC\XYZ"
$startingString = "ABC"
I want "ABC\css\ABC\XYZ"
note: ABC is multiple times in string

this also worked
$completeString.Substring($completeString.IndexOf($startingString + "\"))
You might want to add a leading backslash to the substring test:
$completeString = "C:\Development\WorkABC\ABC-SharePoint\ABC\css\ABC\XYZ"
$startingString = "ABC"
$completeString.Substring($completeString.IndexOf($startingString + "\"))
ABC\ABC-SharePoint\ABC\css\ABC\XYZ
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

HOW TO USE A SINGLE PERFORM FOR VARIOUS TABLES ?

perform test TABLES t_header.
select
       KONH~KNUMH
       konh~datab
       konh~datbi
       konp~kbetr
       konp~konwa
       konp~kpein
       konp~kmein
       KONP~KRECH
       FROM konh INNER JOIN konp
              ON konpknumh = konhknumh
       into table iTABXXX
        "ANY TEMPERARY INTERNAL TABLE.
       for all entries in t_header
       where
             konh~kschl = t_header-kschl
         AND konh~knumh = t_header-knumh.
endform.
how can I use above perform for various internal tables of DIFFERENT LINE TYPES but having the fields KSCHL & KNUMH.

u can use single perform....
just see this example......hope this is what u r expecting....
tables : pa0001.
parameters : p_pernr like pa0001-pernr.
data : itab1 like pa0001 occurs 0 with header line.
data : itab2 like pa0002 occurs 0 with header line.
perform get_data tables itab1 itab2.
if not itab1[] is initial.
loop at itab1.
write :/ itab1-pernr.
endloop.
endif.
if not itab2[] is initial.
loop at itab2.
write :/ itab2-pernr.
endloop.
endif.
*&      Form get_data
      text
     -->P_ITAB1 text
     -->P_ITAB2 text
form get_data tables   itab1 structure pa0001
                        itab2 structure pa0002.
select * from pa0001 into table itab1 where pernr = p_pernr and begda le sy-datum and endda ge sy-datum.
select * from pa0002 into table itab2 where pernr = p_pernr and begda le sy-datum and endda ge sy-datum.
endform.                    " get_data
Regards
vasu

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

I'd like to know how can i connect my old iMac tiger with new one iMac lion. I wanna use the old one for external disk to collect files from there to new one.

Hi mshields1162,
Great question, and welcome to Apple Support Communities.
First, you may want to choose to have the sidebar displayed for familiarity:
iTunes 11: Frequently used features
http://support.apple.com/kb/HT5649
Afterwards, your device should be displayed if connected:
We'll want to click on it, and choose the Music tab at the top. Let's make sure "Sync Music" is checked:
Afterwards, you'll have the option to sync either the entire music library (for your first iPod), or "Selected playlists, artists, albums, and genres" (for the secondary device). Upon selecting this option, four larger option boxes will appear allowing you to pick and choose what content will be synced. For audiobooks, you may need to do the above in the "Books" section. For a visual instruction on how to do this, see the following:
iTunes 10: Sync to your iPod
http://support.apple.com/kb/VI72
Thanks,
Matt M.

How to use remote directory for external table

Hi Folks,
I have 2 Oracle 11GR2 64 bit database installed on Win 2008 server as prod1 and prod2.
I have one directory created on prod1 server as EXT_TAB_DIR using the path as D:\OrsDWtest_dir .
I want to use this directory in Prod2 server and use external table using this remote directory.
I am able to access the Prod1 directory from Prod2 machine and also i have created Network map drive as Z drive pointing to that prod1 D:\OrsDWtest_dir directory. Also i checked read and Write permissions are there . I am able to create the external table but when i try to fetch the data i m getting below error ..
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file IOMM_20121213_060736.csv in EXT_TAB_DIR not found
now my doubt is this possible ? Can we use remote directory for External table ? or is there is there any alternative way to achieve same ?
Thanks & Regards,
Vikash Jain(DBA)

could you confirm the name and the existence of this file "IOMM_20121213_060736.csv" ?
same error like:
http://www.oracle-base.com/articles/9i/external-tables-9i.php
if the load files have not been saved in the appropriate directory the following result will be displayed.
SQL> SELECT *
2 FROM countries_ext
3 ORDER BY country_name;
SELECT *
ERROR at line 1:
ORA-29913: error in executing ODCIEXTTABLEOPEN callout
ORA-29400: data cartridge error
KUP-04040: file Countries1.txt in EXT_TABLES not found
ORA-06512: at "SYS.ORACLE_LOADER", line 14
ORA-06512: at line 1Edited by: Fran on 10-ene-2013 23:32

How to get KD Folder path

Hi,
How to get the full path for a given folder ID in KD ?
I am using Java IDK 5.3
Looking for a method like this:
String fullPath = getFolderPath(200);
Thanks.

Besides, the HTML input type="file" lets the client choose a file to upload and it only sends the file contents along the request body from the client to the server. I have reread your question over three times, but I really, really don't see any relation between that HTML code line and your actual problem. Aren't you confusing the client-server relation and the concepts behind it?
At least I can tell you that you can't get the folder path in the server side (as asked in the topic subject), although some browsers (e.g. IE) will do this, but this is faulty and you shouldn't rely on this. Just obtain the file contents from the request body. There are parsers for this as well, such as Apache Commons FileUpload.

Folder path for developing custom UI in SAP OEE

Hi,
recently I was developing in a scenario where I need to add a custom UI in OEE Dashboard. For that I followed the SAP How to guide for Custom UI. As per the guide I developed the view.js file controller.js file and then set them in activity configuration. It was stated in the how to doc that we have to put upto the name of the view page not the extension. Interestingly I found one thing here.
OEE always expects a folder path for that view file is such a way http://<host>:<port>/<Project name>/Web/WebContent/customActivity/<View page>.
Main problem to use that is, we can't add any specific folder in between any of the folder and even we can't change the name of the folder. I have tried with "customactivity", it didn't work.
I think this kind of limitation anyone can't expect while developing. I just post this here to explore that if I am doing anything wrong or that is a issue. Another point is in the how to doc it is not mentioned anywhere.
Thanks and Regards,
Suman

Hi All,
This is for everyone's update.
I have raised this point to the SAP, they have sent the confirmation that they have wrote their logic in such a way, so we have to mention the same path while developing any custom UI for SAP OEE. But as per my understanding it is kind of limitation they are giving.
So the standard path to keep the custom UI code for any SAP OEE Custom UI is :
http://<host>:<port>/<Project name>/Web/WebContent/customActivity/<View page>
Regards,
Suman

How to Use the same iview for both KM End User and the KM Administrator

Hi friends,
*This is my scenario :* How to Use the same iview for both KM End User and the KM Administrator but with different Context
Menu Options.
i followed these steps but im getting same context menu for both KM End User and the KM Administrator .
Assign the role Content Administrator to the user km_admin. This is needed so that km_admin can change
the presentation settings for the KM Folder u201EReports_kmFolder‟.
Now, login with user km_admin. Navigate to the Km Folder reports_kmFolder through Content Administration
-> Km Content. Click on Details link of the folder reports_kmFolder.
Go To Settings -> Presentation. Click on the tab u201ESettings for You‟-> Click on button u201ESelect Profile‟.
Select the radio button corresponding to u201Elayout Set‟, and choose u201EConsumerExplorer‟ from the dropdown.
Click u201EOK‟.
Select both the check boxes corresponding to Items Affected as shown above, and click u201ESave‟
Now, remove the u201ESuper Administrator‟ role from the user km_admin and login with this user.
How rto resolve this????
Regards,
Prasad.

Hello Prasad,
Most likely the user km_admin still has system principal roles assigned, even though you removed the Super Admin role, you should check that this user doesn't have any other admin roles, otherwise it will be considered a System Principal user and will therefore still have access to all content. For more information see http://help.sap.com/saphelp_nw70/helpdata/en/19/56f28fbd4e11d5993b00508b6b8b11/frameset.htm
Try creating a new user with just read access to the content and you should see that it will not be able to make any changes etc.
Regards,
Lorcan.

How to use the index method for pathpoints object in illustrator through javascripts

hii...
am using Illustrator CS2 using javascripts...
how to use the index method for pathpoints object in illustrator through javascripts..

Hi, what are you trying to do with path points?
CarlosCanto

How to use the different class for each screen as well as function.

Hi Experts,
How to use the different class for each screen as well as function.
With BestRegards,
M.Thippa Reddy.

Hi ThippaReddy,
see this sample code
Public Class ClsMenInBlack
#Region "Declarations"
    'Class objects
    'UI and Di objects
    Dim objForm As SAPbouiCOM.Form
    'Variables
    Dim strQuery As String
#End Region
#Region "Methods"
    Private Function GeRate() As Double
            Return Double
    End Function
#End Region
Public Sub SBO_Appln_MenuEvent(ByRef pVal As SAPbouiCOM.MenuEvent, ByRef BubbleEvent As Boolean)
        If pVal.BeforeAction = True Then
            If pVal.MenuUID = "ENV_Menu_MIB" Then
            End If
        Else ' Before Action False
            End If
    End Sub
#End Region
End Class
End Class
Rgds
Micheal
Vasu Anna Regional Feeling a???? Just Kidding
Edited by: micheal willis on Jul 27, 2009 5:49 PM
Edited by: micheal willis on Jul 27, 2009 5:50 PM

How can i set a path for my deployment files in weblogic server 10.3

Hi
How can i set the path for my WAR ,JAR files while deploying.i am using the wls10.3 version.
is there any scripts for this ,please provide me.
my Application is ADF 11g application.

By "path", I assume you mean "classpath".
The simplest way is simply to include the jars you need inside the web application or web module's WEB-INF/lib directory, EJB module's META-INF/lib directory, or EAR lib directory.
If that's not practical, if you use NodeManager to start your servers, you can go to the "Server Start" tab in the server definition in the WebLogic console and edit the "Classpath" field, which defaults to no value. You can specify a classpath value there. Note that if you specify a value there, it REPLACES the default classpath for the server, it doesn't add to it. If you need to just add to it (a much more likely scenario), if the value references the value "$CLASSPATH" in it, that will reference the original classpath value that the server would have had.
So, for instance, if you wanted to include the MQ jars in the server classpath, you could set a value like this:
/usr/java/mq/lib/mq.jar:/usr/java/mq/lib/mqstuff.jar:$CLASSPATH

How to write the folder path in standard webi report - Most Accessed Documents

How to write the folder path in standard webi report - Most Accessed Documents
All
   -> Public Folders
                  -> Auditor
                  -> ABCD
I want to give path of folder 'ABCD' and all the reports/ subfolders under it?
Prompt - 'Enter the Folder Path(Add % at the end to include Sub Folders)' ?
Give me exact path syntax

Hi Daniel,
But when I give my URL as
http://serverA:80/irj/portal??NavigationTarget=ROLES://portal_content/crm-practice/14-Feb/Test_Page
I am able to access the iview but the thing is I am getting TLN,Toolarea,Masthead,etc.
I will tell my requirement,
ServerA (EP 7.0) has some iviews,pages...
I need to access these iviews from serverB(EP 6.0)....
In ServerB only the iviews has to be displayed in the content area but not TLN,Toolarea,etc.
Kindly help me in this regard.
Thanks and regards,
Purushothaman.
Message was edited by: Purushothaman Vyasarao

How to find out the link for the tables for sub contract PO

Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.

Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK.

How to use sub folder paths for external table location parameter?

Similar Messages

Maybe you are looking for