Follow up data table changes

Hi experts,
I need to modify a data table according to the requirements. I need to log when and who modified the table and what fields are changed, what is the new and old value of the field.
Is there any possibility to follow up the changes in a simple way?

Generate a table maintenance of this data table. take the reference of the document mentioned at link below to do the same. This document will give you an insight of how all the things which you require should be fulfilled.
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/60ffac76-93f3-2c10-a4b6-e33fb866d1fb
Hope this helps!!
Kanchan

Similar Messages

Incident management and Critical Master data table change management.

Dears,
I need to configure Incident management and Critical Master data table change management on our solman 7.0 server.
I want to know how many days should be required for this activity and please share documents.
Shivam

Hi,
I faced a similar situation,
I tried all the possible ways like activating InfoObject manually, Through an activation program of aggregates,
Also ran RSRV check which was showing no negative results.
I raised an OSS note for the same but after that when SAP returned back the process chian ran again as it is a daily load which activated the record in 'M'.
I ask you to wait till the next process chian run, and try all possible ways to activate.
If it is not corrected then raise an oss to SAP.
Thanks & Regards,
Vishnu

DSO New data table rejects data

Dear SDNers,
I have a critical issue.
I am loading data into a DSO (which has end routine, lookup DSO of 2crore records in production)
In development, it worked good.
In Production it took very long time to load data. I initially thought it might be because of the lookup DSO. But it never loaded the data into new data table. The data load monitor results in yellow always.
I used filter in DTP and loaded only limited data. But this also not loading data. The data load monitor results in yellow again.
Then I found that i am unable to access the new data table's data browser (from manage).
I checked with se11 also, I am able to see the table. But if I click contents, the system hangs.
So what I observe is New data table is not allowing to post any new entries?
Kindly give me some insight regarding solving this issue.
Thanks,
Guru

Hi Prasanth,
I didnt say as i am able to see data in change log. I said I am able to access the data browser of both Active and change log table.
and @Saveen, I donot want to load data manually to new data table.
To be Precise i ll answer pransanth questions here..
What is the status of the load in the monitor screen. Yellow (still running)
Is the load completed or not? what is the record count? No the load is not completing.
Is the request active in the DSo and available for reporting? Request is active
Are you facing this issue for the first time? Yes for the first time and only in this DSO.
Are you sure you have authorizations to check the data through manage screen, try to run the Authorization trace on your id and check if the roles are there for your id or not? Yes, I am able to see active data table, change log etcc. even new table of other DSOs. Only new table of this DSO is inaccessible from manage
See, I used filter in DTP, so it ll bring only limited records from lookup DSO. So no issue with the performance deadlock.
And again I simulated the load and saw, Result package gets filled up perfectly, So the code also works fine.
but if I load the data itll be yellow status with no records added in new table.
In this scenario, New table is inaccesible from manage, So I am pretty sure that both are interrelated issues.
Can some one help me pls..
Thanks,
Guru

CDC - How to configure when to insert changed data in Change Tables

Hi!
I have the following situation: I need to capture changes from some source tables only when some columns of interest changed, not when any data from those tables changed.
Is there a way to confidure that in CDC? I use Synchronous Publishing.
Thank you in advance!

What you can do is set up CDC to record both the before (UO) en after (UN) image of the updated row and then filter out the rows that have different before and after values for the columns that you want to check on.
See e.g. http://download.oracle.com/docs/cd/B19306_01/server.102/b14223/cdc.htm#i1025616, step 4, capture_values=>both. You can even delete rows from the change table directly, before consuming the change set result from the subscriber view.
Best regards, Erik Ykema

View Customization Table changes and Data table base changes in a report

Hi All,
How to view Customization Table changes and DAta table base changes in a report ,
Is it right transactions: SCU3 or RSVTPROT
Also plz let me know the concept of audit trial,
Thanks
SD

Hi,
Changes to master data objects must be captured for the For compliance purposes. The auditor allows you to be able to view and print an audit log of changes to master data objects for a chosen period. It is very common for external auditors to focus on what has changed from one year or quarter to the next to help determine the nature, extent, and population for testing. To configure and access your audit log, perform the actions listed with each of the following utilities.
Audit Trail is used to track the record changes.
The report RPUAUD00 gives all the changes done to the masterdata by any user anytime.
But, before using this audit trial, please ensure that the system hardware is well equipped as the audit trials activation would later become a performance issue as this would occupy a lot of space in the coming time.
Best Regards,
Venkat.

Ora-01466 unable to read data table definition has changed oracle.

hi all,
i truncated a table before 10 min. now i want the data's so i used this query ;
select *
from ( select *
from sometable where some_condition )
as of timestamp sysdate-1;
but it shows:
""" ora-01466 unable to read data table definition has changed oracle"""";
how to get the deleted records from database????????????
Edited by: 887268 on Oct 24, 2011 4:02 AM

Error: ORA 1466
Text:   unable to read data -- object definition has changed
Cause: This is a time-based read consistency error for a database object,
        such as a table or index.
        Either of the following may have happened:
        The query was parsed and executed with a snapshot older than the time
        the object was changed.
        The creation time-stamp of the object is greater than the current
        system time.
        This happens, for example, when the system time is set to a time
        earlier than the creation time of the object.
Action: If the cause is
        an old snapshot, then commit or rollback the transaction and resume
        work.
        a creation time-stamp in the future, ensure the system time is set
        correctly.
        If the object creation time-stamp is still greater than the system
        time, then export the object's data, drop the object, recreate the
        object so it has a new creation time-stamp, import the object's data,
        and resume work.

How to insert data into a table only when data has changed its value (when compared to the previous inserted value)

I wish to insert data into a table only when the value of the inserted data has changed. Thus, in a time series, if the value of the data at time, t-1, is 206 then if the data to be inserted at time t is 206, then it is skipped (not entered).
If the value of the data at time t+1 is 206, it is skipped also; until the value changes, so if the value at t+1 was 205, then that would be inserted, and if at time t+2 the data is 206, it would be inserted too.
What is the best way to do it without increasing overheads?

This view works:
SELECT
i.IDNO,i.[Date],i.[Level]
FROM
mytable i
INNER
JOIN mytable
d
ON
d.IDNO
= i.IDNO-1
WHERE
i.[Level]
<> d.[Level]
on this mytable below. A trigger could be quite useful here although I am cautious using them. However I wish to avoid the overhead by not having a temp table (which could be sizable). mytable below
should give 3 lines. The IDNO is an identity column.
IDNO
Item
Date
Level
1
X24
12/23/13 10:41
22996
2
X24
12/23/13 10:41
22996
3
X24
12/23/13 9:21
23256
4
X24
12/23/13 9:21
23256
5
X24
12/23/13 9:22
23256
6
X24
12/23/13 9:22
23256
7
X24
12/23/13 9:22
22916

Need suggestion to get data from change log table of ODS.

Hello,
There is a case where i am loading opportunity header data from header ODS and opportunity item data from item ODS in the opportunity cube.
Status (1= OPEN, 2= WON ETC) of the opportunity are available only in header ODS and not in item ODS.
While loading data from header ODS to cube, I am loading it directly but while loading data from item ODS to cube i am using active data table of header ODS as a lookup in the update rule from item ODS to cube. I am selecting status from the active data table of header ODS while loading data from item ODS to cube.
Since active data table will have only after image records, there is some data mismatch in the report as i am selecting data from active data table of header ODS while loading data from item ODS to cube.
I need to select data from Change log in order to get before image also instead of active data table in order to overcome this issue. Is there any way by which i can do selection from Change log instead of active data table as change logs are generated at run time.
Please let me know if you have any suggestions.
Regards,
Sanjay Chaurasia.

Hi,
You can use the changelog table of the DSO.
Right click manage the Header DSO, go to the contents tab and click Change Log table. There you can see the technical name of the Change Log table.
In the update rule Routine, give the tech name of Change log table instead of Active table name.
Hope it helps.
Krishna

Data in the table changes when multiple users try to submit data

I have a dynamic table. The table is created in the wdDoModifyView. The user can load data into the table from an excel file. So I have a "Load" button that loads the data from the selected excel file to the table. I also have a "Submit" button. This "Submit" button converts the data to an xml file and make a call to an oracle stored procedure for validation check. If there's an error it will be returned and displayed to the user. If none, a summary of data for posting will be displayed to the user. If the data is correct and the user hit the ok button, the same data will be return to oracle sp for loading in the table.
The problem we encountered is when multiple users are loading and submitting at the same time, the data displayed in the dynamic tables changes after clicking the ok button. It is as if, the table displays the data being loaded by other user.
This is an error that is difficult to recreate. This doesn't happen all the time. I hope you somebody could enlighten me why this is happening. I'm not sure if it has something to do with multithreading or session.
Edited by: Marlyn Agco on Apr 14, 2009 3:57 PM

Hi Armin,
Did you mean storing view instances in static references and accessing them outside the wdDoModifyView is not a good idea? In wdDoInit the nodes are dynamically created according to the xml file being returned by the database. This node is stored in a static variable which is also used in wdDoModifyView to create the dynamic table.
What do you suggest? We're still encountering same issue when multiple users are uploading data.

How to identify a specific object that changed in a data table?

I have a data table in my jsf page which populate by myList (a property of type List<myObject> in myBean) that contains a list of myObject objects.
Within data table, the 'amount' property of myObject is in a h:inputText named 'amountText'.
How can I recalculate another property (for example 'cost') of the specific myObject within one of the
data table rows whenever user change the value of 'amountText' ?

Hi Roger,
I guess, it is up to your choice about design how you want to implement.
you have two ways....
1) Use valueChangeListener attribute of the text field, as it will be called for the row of the database on which the bind property value is actually changed.
2) Not prefered, but you can use setterMethod of amount in the your object, and can compare its new value with the old one and can decide the consequence.
Please let me know, if it solves your concern or you have a different concern.

How to transfer data in change log table of dso to z-table using abap code

Hi can you please explain me how to transfer data in change log table of dso to z-table using abap code ,with out using Function module concept

PROGRAM NAME:   ZBW_DELTA_TO_GSTAR                                 **
report ZBW_DELTA_TO_GSTAR no standard page heading
                                 line-size 120
                                 line-count 75
                                 message-id ZBW_MSG_CLS.
tables:   ZGIV_DLTA_EBV_BB,
          ZGIV_DLTA_EM2_BL,
          ZGIV_DLTA_EM2_BK.
Selection Screen Definitions
SELECTION-SCREEN: BEGIN OF BLOCK INNER WITH FRAME TITLE TEXT-001.
SELECTION-SCREEN: SKIP 1.
PARAMETERS:       EBVBB RADIOBUTTON GROUP ROLL,
                  EM2BL RADIOBUTTON GROUP ROLL,
                  EM2BK RADIOBUTTON GROUP ROLL.
SELECTION-SCREEN: END OF BLOCK INNER.
Data: WS_UPDATE_FLAG Type C,
       UCounter(9)      Type N,
       ICounter(9)      Type N.
DATA: T_ZGIV_DLTA_EBV_BB Type Standard Table of ZGIV_DLTA_EBV_BB,
       s_ZGIV_DLTA_EBV_BB LIKE line of T_ZGIV_DLTA_EBV_BB.
DATA: T_ZGIV_DLTA_EM2_BK Type Standard Table of ZGIV_DLTA_EM2_BK,
       s_ZGIV_DLTA_EM2_BK LIKE line of T_ZGIV_DLTA_EM2_BK.
DATA: T_ZGIV_DLTA_EM2_BL Type Standard Table of ZGIV_DLTA_EM2_BL,
       s_ZGIV_DLTA_EM2_BL LIKE line of T_ZGIV_DLTA_EM2_BL.
Standard Internal Tables - Describe usage.
data: begin of i_AEPSD_O0140 occurs 0.
        include structure /BIC/AEPSD_O0140.
data: end of i_AEPSD_O0140.
data: begin of i_AEPSD_O0240 occurs 0.
        include structure /BIC/AEPSD_O0240.
data: end of i_AEPSD_O0240.
data: begin of i_AEPSD_O0340 occurs 0.
        include structure /BIC/AEPSD_O0340.
data: end of i_AEPSD_O0340.
data: begin of i_GIV_DLTA_EBV_BB occurs 0.
        include structure ZGIV_DLTA_EBV_BB.
data: end of i_GIV_DLTA_EBV_BB.
data: begin of i_GIV_DLTA_EM2_BK occurs 0.
        include structure ZGIV_DLTA_EM2_BK.
data: end of i_GIV_DLTA_EM2_BK.
data: begin of i_GIV_DLTA_EM2_BL occurs 0.
        include structure ZGIV_DLTA_EM2_BL.
data: end of i_GIV_DLTA_EM2_BL.
Miscellaneous Program Variables and Constants.
TOP-OF-PAGE
top-of-page.
START-OF-SELECTION
start-of-selection.
Clear: i_GIV_DLTA_EBV_BB,
         i_GIV_DLTA_EM2_BK,
         i_GIV_DLTA_EM2_BL,
         UCounter, ICounter.
IF EBVBB = 'X'.
    PERFORM 100_EXTRACT_EBV_BB_DELTA_RECS.
ELSEIF EM2BK = 'X'.
    PERFORM 100_EXTRACT_EM2_BK_DELTA_RECS.
ELSE.
    PERFORM 100_EXTRACT_EM2_BL_DELTA_RECS.
ENDIF.
FORM 100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EBV_BB_DELTA_RECS.
Refresh:   i_AEPSD_O0140,
             i_GIV_DLTA_EBV_BB.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EBV_BB .
Select * From /BIC/AEPSD_O0140
    Into TABLE i_AEPSD_O0140.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0140.
      MOVE-CORRESPONDING i_AEPSD_O0140 TO s_ZGIV_DLTA_EBV_BB.
      MOVE SY-DATUM to s_ZGIV_DLTA_EBV_BB-create_dt.
      INSERT ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EBV_BB FROM s_ZGIV_DLTA_EBV_BB.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EBV_BB_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BK_DELTA_RECS.
Refresh:   i_AEPSD_O0240,
           i_GIV_DLTA_EM2_BK.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BK .
Select * From /BIC/AEPSD_O0240
    Into TABLE i_AEPSD_O0240.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0240.
      MOVE-CORRESPONDING i_AEPSD_O0240 TO s_ZGIV_DLTA_EM2_BK.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BK-create_dt.
        INSERT ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BK FROM s_ZGIV_DLTA_EM2_BK.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BK_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS
FORM 100_EXTRACT_EM2_BL_DELTA_RECS.
Refresh:   i_AEPSD_O0340,
           i_GIV_DLTA_EM2_BL.
Clear:      UCounter, ICounter, s_ZGIV_DLTA_EM2_BL .
Select * From /BIC/AEPSD_O0340
    Into TABLE i_AEPSD_O0340.
IF SY-Subrc = 0.
    LOOP AT i_AEPSD_O0340.
      MOVE-CORRESPONDING i_AEPSD_O0340 TO s_ZGIV_DLTA_EM2_BL.
      MOVE SY-DATUM to s_ZGIV_DLTA_EM2_BL-create_dt.
        INSERT ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
      IF SY-Subrc = 0.
        ICounter = ICounter + 1.
      ELSE.
        UPDATE ZGIV_DLTA_EM2_BL FROM s_ZGIV_DLTA_EM2_BL.
        IF SY-Subrc = 0.
          UCounter = UCounter + 1.
        ELSE.
          Message E067 with SY-DATUM ' ' SY-UZEIT ' '.
        ENDIF.
      ENDIF.
    ENDLOOP.
ENDIF.
ENDFORM.                    "100_EXTRACT_EM2_BL_DELTA_RECS
END-OF-SELECTION
end-of-selection.
perform D1000_REPORT_DATA.
D1000_REPORT_DATA
form D1000_REPORT_DATA.
*Display the title of the program
write: /25 SY-TITLE.
skip.
Diaplay the details of the user and time
write: /1 'Executed by', 15 SY-UNAME, 30 'Date',
38 SY-DATUM, 53 'Time', 60 SY-UZEIT.
skip 2.
write: / 'Delta Records have been extracted ',
         /   'Updates : ', UCounter,
         /   'Inserts : ', ICounter.
skip.
skip 3.
write: /20 'End of the report'.
endform.                                           "D1000_REPORT_DATA
chgeck it out this also may hep you

Change Data Table column header color

How do I change the background color displayed in data table column headers?

Thanks for your response. Problem is that I'm creating a portlet and the stylesheet.css file does not appear to exist, so Winston's blog does not help.

How to find the Column data type changes in table

Hi All,
I need to find out the column data type changes where made recently in table .
How do i check past changes in column data type. Any data dictionary are there to find out the data type changes in the column .
Thanks in advance..

<FONT FACE="Arial" size=2 color="2D0000">
You have the answer on hand (user_arguments / all_arguments)!
SQL> desc user_arguments
Name                                      Null?    Typ
OBJECT_NAME      VARCHAR2(30)
PACKAGE_NAME     VARCHAR2(30)
OBJECT_ID     NOT NULL NUMBER
OVERLOAD       VARCHAR2(40)
ARGUMENT_NAME VARCHAR2(30)
POSITION       NOT NULL NUMBER
SEQUENCE       NOT NULL NUMBER
DATA_LEVEL     NOT NULL NUMBER
DATA_TYPE      VARCHAR2(30) --> Data Type
DEFAULT_VALUE LONG
DEFAULT_LENGTH NUMBER
IN_OUT         VARCHAR2(9) -->Argument direction (IN,OUT,or IN/OUT)
DATA_LENGTH    NUMBER
DATA_PRECISION NUMBER
DATA_SCALE     NUMBER
RADIX          NUMBER
CHARACTER_SET_NAME VARCHAR2(44)
TYPE_OWNER         VARCHAR2(30)
TYPE_NAME          VARCHAR2(30)
TYPE_SUBNAME       VARCHAR2(30)
TYPE_LINK          VARCHAR2(128)
PLS_TYPE           VARCHAR2(30)
CHAR_LENGTH        NUMBER
CHAR_USED          VARCHAR2(1)
Look for Data_Type where IN_OUT say OUT. That will be the data type retruned by that function.
Edited :
or POSITION in argument list,or null for function return value
-SK
</FONT>

Change Profit centers in all transactional data tables

Hello Experts,
I have been assigned to change Profit center MASKTOOLS to BRION in all transaction data tables.
Is there any standard SAP programs/reports that will help me do this?
How do I identify all tables were Profit center is stored?
Bearing in mind if I make changes directly in tables (example via Abap programs) BW will not recognise any changed documents and therefore not update BW accordingly.
Regards in advance Steve

Thanks Karthik T,
What about Internal orders, Sales orders, Service orders, Production orders, PA segments etc etc. etc..
I also have to think about orders with settlement rules which hold both profit center and profitablility segments which also hold profit centers.
I am still hoping there is SAP standard reports that can help identify and change
Steve D

Dynamic Internal Table - data type changed automatically

Dear All,
I have a requirement of craetion of dynamic inetrnal table which I have created referring to a custom table .
In that custom table there is field ZDC002 of type DEC(16,7) which is converted to data type P(9,7) .
Now it works fine if 2 digit and 7 decimals value passed like 12.1234567 but it gives overflow error when passing more than 2 digit value .
Please help me as I have no control to SAP standard functinality while creation of data-type . My piece of code :
ref_table_des ?=
cl_abap_typedescr=>describe_by_name( 'ZBW_EE_DCONTR' ).
idetails[] = ref_table_des->components[].
In this idetails[] table filedname data type changed from DEC16,7 to data type P(9,7). => Total Length of Packed Data Type is 9 which allows to contain only 2 numericdigits and 7 decimals => puts overflow error if more than 2 numeric data passed.
Any suggestions will be appreciated.
Thanks,
Sachin

Did you try to view the code on the Data Source view and cube that it is reflecting the correct data type on both places? if not you can change there and save it.
prajwal kumar potula

Follow up data table changes

Similar Messages

Maybe you are looking for