Following the Purchase Order sample

and I'm stuck on this line of script:
partNoScript.populatePartNo(
this);
What does PartNo refer to?
Thanks,
MDawn

PartNo is an array defined in the PartNoScript script object. It contains the values that are loaded into the drop-down.
// Array of part numbers.
var partNo = new Array(" ",
   "580463116",
   "25906311C",
   "25129637J",
   "771128",
   "11198262A",
   "57251",
   "25906312A",
   "51615223D",
   "51615224D",
   "516154CAC");

Similar Messages

How to get the Purchase Order sample form to have 2 detail regions?

I would like to use the "Purchase Order" sample form as the base, and add one more "detail header" and "detail" subform to it.
So I copy and paste the "detail header" + "detail" subforms, and position them right beneath the first "detail" subform.
It works to certain extend. I can click the "Add Item" button(s), and it would expand the respective "detail" region.
The problem comes when things get expanded to the 2nd page.
Say, I first add 5 rows to the 2nd "detail" region, everything still fits in one page;
then I keep adding rows to the 1st "detail" region, and it begins to expand to the 2nd page....
everything in the first "detail" region can still fit in the first page,
the rows in the 2nd "detail" region should get pushed to the 2nd page...
but when I look at the 2nd page of the form, the "detail header" on the 2nd page is that of the "FIRST" detail header, not the 2nd detail header!!
So, when you look at the entire form, you have
First Detail Header
some First Detail Rows
2nd Detail Header
some 2nd Detail rows
--- end of page 1---
--- page 2---
First Detail Header
some detail rows (can't tell if they belong to the first detail region or 2nd detail region)
This obviously is not right.
So, how do I fix it such that the Detail Header on the 2nd page is that of the 2nd Detail header???

an update:
I have found out that the detail rows on the 2nd page are all that of the 2nd detail region.
so, it's like this:
when you look at the entire form, you have
First Detail Header
all the First Detail Rows
2nd Detail Header
some 2nd Detail rows
--- end of page 1---
--- page 2---
First Detail Header
some 2nd detail rows

I Need interactive report to list the purchase orders details for a vendor

I Need interactive report to list the purchase orders details for a vendor that has interactive drill down options to give the detail of vendor from vendor master.

Hi
see this sample report
this is Customer wise sales orders
just make similar report just using LFA1, EKKO and EKPO tables instead of KNA1,VBAK,VBAP
REPORT ZTEJ_INTAB1 LINE-SIZE 103 LINE-COUNT 35(5) NO STANDARD PAGE
HEADING.
*TABLES DECLARATION
TABLES : KNA1, VBAK, VBAP.
*SELECT OPTIONS
SELECT-OPTIONS: CUST_NO FOR KNA1-KUNNR.
*INITIALIZATION
INITIALIZATION.
CUST_NO-LOW = '01'.
CUST_NO-HIGH = '5000'.
CUST_NO-SIGN = 'I'.
CUST_NO-OPTION = 'BT'.
APPEND CUST_NO.
*SELECTION SCREEN VALIDATION
AT SELECTION-SCREEN ON CUST_NO.
LOOP AT SCREEN.
IF CUST_NO-LOW < 1 OR CUST_NO-HIGH > 5000.
MESSAGE E001(ZTJ1).
ENDIF.
ENDLOOP.
*BASIC LIST SELECTION
START-OF-SELECTION.
SELECT KUNNR NAME1 ORT01 LAND1 INTO
(KNA1-KUNNR, KNA1-NAME1,KNA1-ORT01,KNA1-LAND1)
FROM KNA1
WHERE KUNNR IN CUST_NO.
WRITE:/1 SY-VLINE,
KNA1-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
KNA1-NAME1 UNDER 'NAME',
61 SY-VLINE,
KNA1-ORT01 UNDER 'CITY',
86 SY-VLINE,
KNA1-LAND1 UNDER 'COUNTRY',
103 SY-VLINE.
HIDE: KNA1-KUNNR.
ENDSELECT.
ULINE.
*SECONDARY LIST ACCESS
AT user-command.
IF SY-UCOMM = 'IONE'.
PERFORM SALES_ORD.
ENDIF.
IF SY-UCOMM = 'ITWO'.
PERFORM ITEM_DET.
ENDIF.
*TOP OF PAGE
TOP-OF-PAGE.
FORMAT COLOR 1.
WRITE : 'CUSTOMER DETAILS'.
FORMAT COLOR 1 OFF.
ULINE.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'NAME',
61 SY-VLINE,
63 'CITY',
86 SY-VLINE,
88 'COUNTRY',
103 SY-VLINE.
ULINE.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR SECONDARY LISTS
TOP-OF-PAGE DURING LINE-SELECTION.
*TOP OF PAGE FOR 1ST SECONDARY LIST
IF SY-UCOMM = 'IONE'.
ULINE.
FORMAT COLOR 1.
WRITE : 'SALES ORDER DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'CUSTOMER NO.',
16 SY-VLINE,
18 'SALES ORDER NO.',
40 SY-VLINE,
42 'DATE',
60 SY-VLINE,
62 'CREATOR',
85 SY-VLINE,
87 'DOC DATE',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*TOP OF PAGE FOR 2ND SECONDARY LIST
IF SY-UCOMM = 'ITWO'.
ULINE.
FORMAT COLOR 1.
WRITE : 'ITEM DETAILS'.
ULINE.
FORMAT COLOR 1 OFF.
FORMAT COLOR 3.
WRITE : 1 SY-VLINE,
3 'SALES ORDER NO.',
40 SY-VLINE,
42 'SALES ITEM NO.',
60 SY-VLINE,
62 'ORDER QUANTITY',
103 SY-VLINE.
ULINE.
ENDIF.
FORMAT COLOR 3 OFF.
*END OF PAGE
END-OF-PAGE.
ULINE.
WRITE :'USER :',SY-UNAME,/,'DATE :', SY-DATUM, 85 'END OF PAGE:',
SY-PAGNO.
SKIP.
*& Form SALES_ORD
*& FIRST SECONDARY LIST FORM
FORM SALES_ORD .
SELECT KUNNR VBELN ERDAT ERNAM AUDAT INTO
(VBAK-KUNNR, VBAK-VBELN, VBAK-ERDAT, VBAK-ERNAM, VBAK-AUDAT)
FROM VBAK
WHERE KUNNR = KNA1-KUNNR.
WRITE:/1 SY-VLINE,
VBAK-KUNNR UNDER 'CUSTOMER NO.' HOTSPOT ON,
16 SY-VLINE,
VBAK-VBELN UNDER 'SALES ORDER NO.' HOTSPOT ON,
40 SY-VLINE,
VBAK-ERDAT UNDER 'DATE',
60 SY-VLINE,
VBAK-ERNAM UNDER 'CREATOR',
85 SY-VLINE,
VBAK-AUDAT UNDER 'DOC DATE',
103 SY-VLINE.
HIDE : VBAK-VBELN.
ENDSELECT.
ULINE.
ENDFORM. " SALES_ORD
*& Form ITEM_DET
*& SECOND SECONDARY LIST FORM
FORM ITEM_DET .
SELECT VBELN POSNR KWMENG INTO
(VBAP-VBELN, VBAP-POSNR, VBAP-KWMENG)
FROM VBAP
WHERE VBELN = VBAK-VBELN.
WRITE : /1 SY-VLINE,
VBAP-VBELN UNDER 'SALES ORDER NO.',
40 SY-VLINE,
VBAP-POSNR UNDER 'SALES ITEM NO.',
60 SY-VLINE,
VBAP-KWMENG UNDER 'ORDER QUANTITY',
103 SY-VLINE.
ENDSELECT.
ULINE.
ENDFORM. " ITEM_DET
REPORT demo_list_at_pf.
START-OF-SELECTION.
WRITE 'Basic List, Press PF5, PF6, PF7, or PF8'.
AT pf5.
PERFORM out.
AT pf6.
PERFORM out.
AT pf7.
PERFORM out.
AT pf8.
PERFORM out.
FORM out.
WRITE: 'Secondary List by PF-Key Selection',
/ 'SY-LSIND =', sy-lsind,
/ 'SY-UCOMM =', sy-ucomm.
ENDFORM.
After executing the program, the system displays the basic list. The user can press the function keys F5 , F6 , F7 , and F8 to create secondary lists. If, for example, the 14th key the user presses is F6 , the output on the displayed secondary list looks as follows:
Secondary List by PF-Key Selection
SY-LSIND = 14
SY-UCOMM = PF06
Example for AT USER-COMMAND.
REPORT demo_list_at_user_command NO STANDARD PAGE HEADING.
START-OF-SELECTION.
WRITE: 'Basic List',
/ 'SY-LSIND:', sy-lsind.
TOP-OF-PAGE.
WRITE 'Top-of-Page'.
ULINE.
TOP-OF-PAGE DURING LINE-SELECTION.
CASE sy-pfkey.
WHEN 'TEST'.
WRITE 'Self-defined GUI for Function Codes'.
ULINE.
ENDCASE.
AT LINE-SELECTION.
SET PF-STATUS 'TEST' EXCLUDING 'PICK'.
PERFORM out.
sy-lsind = sy-lsind - 1.
AT USER-COMMAND.
CASE sy-ucomm.
WHEN 'FC1'.
PERFORM out.
WRITE / 'Button FUN 1 was pressed'.
WHEN 'FC2'.
PERFORM out.
WRITE / 'Button FUN 2 was pressed'.
WHEN 'FC3'.
PERFORM out.
WRITE / 'Button FUN 3 was pressed'.
WHEN 'FC4'.
PERFORM out.
WRITE / 'Button FUN 4 was pressed'.
WHEN 'FC5'.
PERFORM out.
WRITE / 'Button FUN 5 was pressed'.
ENDCASE.
sy-lsind = sy-lsind - 1.
FORM out.
WRITE: 'Secondary List',
/ 'SY-LSIND:', sy-lsind,
/ 'SY-PFKEY:', sy-pfkey.
ENDFORM.
When you run the program, the system displays the following basic list with a the page header defined in the program:
You can trigger the AT LINE-SELECTION event by double-clicking a line. The system sets the status TEST and deactivates the function code PICK. The status TEST contains function codes FC1 to FC5. These are assigned to pushbuttons in the application toolbar. The page header of the detail list depends on the status.
Here, double-clicking a line no longer triggers an event. However, there is now an application toolbar containing five user-defined pushbuttons. You can use these to trigger the AT USER-COMMAND event. The CASE statement contains a different reaction for each pushbutton.
For each interactive event, the system decreases the SY-LSIND system field by one, thus canceling out the automatic increase. All detail lists now have the same level as the basic list and thus overwrite it. While the detail list is being created, SY-LSIND still has the value 1.
Regards
Anji

How to set up automatic payment for the purchase order

Hi, All,
I have one question how to set up automatically payment for the Rent Office purchase Order?
There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
Thanks in advance

Either you can set up ERS or you can pay directly from the FI side.
Prerequisites
Evaluated receipt settlement must be flagged in the purchase order item.
The vendor must be flagged as being subject to ERS in the vendor master record.
The goods receipt must refer to a purchase order.
Goods-receipt-based Invoice Verification must be defined for the purchase order item.
A tax code must have been maintained in the purchase order item.
The order price of the materials may not be an estimated price.
If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
In Purchasing, you can delete the default ERS indicator in a purchase order item.
Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
The selection screen appears.
You can use the following criteria to narrow down selection of the transactions to be settled:
Company code
Plant
Goods receipt posting date
Goods receipt document
Fiscal year of the goods receipt
Vendor
Purchase order and order item
You can define the selection criteria for the invoice documents by:
Delivery
Purchase order
Purchase order item
Goods receipt document
Credit memo
Invoice
Currency
Choose Execute.
The system issues a log for Evaluated Receipt Settlement, which displays the following:
Settled
In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
Could not be settled
In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
Select the item and choose Exclude from ERS.
The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
You can display the following environment information for the order items selected. To do this, choose Goto ®:
Display purchase order
Display invoice
Display material document
Display long text

Excise rate and value is not getting defaulted from the purchase order

Hi all,
While capturing excise invoice , the excise rate and value is not getting defaulted from the purchase order and in Excise Item Tab BED,AED,ECS is Zero at both header as well as item level for only one material in STO process and if we are doing same process taking other material all things are coming perfectly and We are maintaining condition with respect to vendor,plant and material combination.Any input related to this will be helpfull and rewarded.
Regards
Vishal

Hi,
Follow STO Process for this;
1.Create a vendor for the company code of receiving plant, using account group: 0007 using T-Code XK01.
2. Assign this vendor to Delivering plant
Go to XK02 >Purchasing view>Extras>Add. Purchasing data>Plant
3. Create internal customer with the sales area of the vendor. Go To XD01
4. In pricing procedure determination relevant to STO, assign document Pricing Procedure and customer pricing procedure appropriate for STO to get the pricing in the invoice.
5. Maintain condition records for the relevant pricing condition.
6. Some more setting for STO: Go to MM> Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Receiving plant >assign customer here & Supplying SA (for billing) to Receiving plant here
7. Go to MM > Purchasing > Purchase Order > Set up STO > define shipping data for plants > Go to Supplying plant and assign the sales area of receiving plant.
8. Go to MM > Purchasing > Purchase Order > Set up STO > assign delivery Type & Checking rule
Assign the delivery type to document type. In this case, Delivery type NLCC is assigned to Document type NB
9. Go to MM> Purchasing > Purchase Order > Set up STO > Assign document Type, One step Procedure, Under delivery tolerance
Assign the document type NB to supplying plant and receiving plant
10. After all settings, Create the STO using T-Code: ME21N and maintain pricing conditions of freight and Save.
11. In supplying plant Maintain condition record in sales using VK11 the same will flow in receiving plant when referring the OBD no during MIGO.
10. Create Delivery: VL10G
12. Picking, PGI: VL02N
13. Billing: VF01
Save the document and its done
14. J1IIN - Outgoing Excise Invoice
15. MIGO - Goods Receipt against outbound Delivery
16. J1IEX - Capture & Post Excise Invoice
Rgs

User Exit / BAdI to update the pricing conditions of the Purchase Order

Hello SAPients,
This is my requirement:
"Copy the Pricing Conditions from the Shipment Cost Document (VI01 / VI02) to the automatically generated Purchase Order".
I'm using the enhancement V54U0002 (Function Module EXIT_SAPLV54U_002) to EXPORT the values of the Pricing Conditions to memory and I have used the enhancement MM06E005 ( FM EXIT_SAPMM06E_006, 007, 012, 013, 014, 016, and 017) to IMPORT the values from memory and store them in TKOMV. But, when the PO is generated the values don't stay, they are always changed with the standard PBXX pricing conditions.
My question is: Does anyone know the User Exit / BAdI that I can use to change the Pricing Conditions of the Purchase Order?
<<removed_by_moderator>>
Thanks!
Edited by: Vijay Babu Dudla on Jan 14, 2009 11:08 PM

>
kartik tarla wrote:
> check this badi
> ME_PROCESS_PO_CUST
>
> and the following user exit
> Goto-> include RV61AFZA then search for
> USEREXIT_PRICING_RULE see if its helpful to u.
Hello Kartik / SAPients,
I tried with ME_PROCESS_PO_CUST but didn't work. The system doesn't execute that code. Any other idea would be greatly appreciated.
Thanks.

Changing the Condition type Text in the Purchase Order

Hi SAP,
Hi,
We have a requirement where by we need to change the Description of the condition type text in the Purchase order.
The condition type is a entered at item level.
Normally this description comes from the Condition type Definiton i.e., T685T-VTEXT.
can any one of you suggest a User exit or a method where by we can change this text at PO.
Has any one of you came across such situation before. if so please provide me with your inputs.
Thanks
Best Regards
ShitalD
Edited by: Shital Deshpande on Feb 21, 2010 1:07 PM

Hi,
I think it is a config setting..Please check with your functioal consultant regarding the same.. I won't suggest to change the standard SAP table T685T but you can keep it as last option .
From SPRO you can follow the below path
Sales and Distribution->Basic Functions -> Pricing > Pricing Control -> Define condition types.
Regards,
Nagaraj

User-Exit OR a BAdi for the Purchase order create.

Hi,
I am looking for a User-Exit or a BAdi which is fired when the Purchase order is being created in the SRM server via Web template. The requirement is as follows:
There is a flag(Check box) at the the item level, Basic Data tab. This flag is called as Unlimited Overdelivery Allowed. It is with the tolerances field. Now I want this flag to be always set for a PO of a material of certain type.
Can anyone tell me which User-Exit OR Badi I should use to always set this flag?
The Technical field name is UNLIMITED.
I tried a lot but could not get any.
Regards,
Deepak.

Hi Deepak,
Did you try doc_change badi? THis badi is available in all the bus objects.
thanks,
Ashwin

Need to turn off Purchase Info records in the purchase order

Is there a way to turn off the Purchase Info records from appearing in the purchase orders? or atleast not update the Info records?

Kevin,
Please follow the below path in SPRO:
Material management-----Purchasing---environment Data-----Define default values for buyers
Here Remove the Info Record Update
Regards,
Manish

The purchase order cannot be created on Hold

Hello gurus,
I have a doubt, when I want to create a purchase order (transaction ME21N) adopting a purchase requisition, the button "Hold" dissapear.
Any reason why the button "Hold" is missing when adopt the purchase requisition to the purchase order?
I need to save the purchase order on Hold after the adopting, but, I cannot find the button.
Could you help me please a.s.a.p.?
Regards,
Sandra Palomo

See the info below:
Deactivate 'Hold' Function for Enjoy Purchase Order
Use
Application component: MM-PUR-PO-GUI
Function group: MEPO
The Business Add-In (BAdI) ME_HOLD_PO enables you to specify whether an
     Enjoy purchase order can be put on hold or whether this function is to be
     suppressed in accordance with your requirements.
In the standard system, this function is generally offered during the
     creation of an Enjoy purchase order (transaction ME21N) and when a PO
     that is on hold is changed (transaction ME22N).
Note
Enjoy purchase orders cannot be put on hold if any of the following
     criteria apply:
     o The PO contains service items
     o The PO contains "third-party" items
     o Commitment errors are involved
     o Subsequent (period-end volume rebate) settlement is involved
Standard settings
     o In the standard system the Business Add-In is not active.
     o The BAdI is not filter-dependent.
     o The BAdI cannot be used multiple times.
Example
You will find an example implementation under Goto -> Code Example.
In this example, the following behavior is defined:
In the case of stock transfers within a company code, the "Hold" function
     is generally inactive. If an application object contains an error of any
     kind, the function is likewise inactive.

Description name of the purchase order

Hello experts,
My problem is the following : we change the description name of the purchase order in SRM, then we save the document and the old name is coming back. It doesn't take into account the modification.
Regards,
Kiolla

Hi,
I hope you are changing the description in the doc change badi. If its on the UI then please raise OSS message.
Regards
Azad

Need to find how to relate the purchase order table with account assignment

i need to reterieve the account assignment from the table bbp_pdacc, what is field or any tables that is between BBP_PDACC and Purchase order number or the purchase order items. I am working on the SRM system

Jacques-Antoine,
You can't directly translate a repeating node or element (such as an Item or a Project Task from the Accounting Coding Block of an Item) to a singular node or element.
The reason is that, though your use case may have the elements assumed to be the same for all items, this isn't necessarily the case, so ByDesign won't assume that you can use that kind of logic.
The simplest approach would be to do an On-Save at the Root node of the Purchase Order along the following lines:
this.projecttaskpo = this.Item.GetLast().ItemAccountingCodingBlockDistribution.AccountingCodingBlockAssignment.ProjectTaskKey.TaskID;
i wouldn't actually recommend this code.
You'd need validations for IsInitial, IsSet, and those kinds of functions.
i'd at least use some foreach loop to check that all the accounting coding blocks were for the same task, raise warnings if they weren't, etc.

How to extend Project Task in the Purchase Order header?

Hi everybody,
I am facing a problem I am sure is not so hard, but I cannot find my way through it.
So, my objective is to extend the Purchase Order Header with the Project Task ID.
I created the extension field first, as below:
But I just cannot find how to populate it automatically from the data in the Project Task field.
I tried a Relation in a BO extension going through the AccountingBlockAssignement, but it seems to not be functional.
I also tried to make a Reference to the extension field and created an Event After Modify like:
this.projecttaskpo = this.ExtensionForPO.content
The Project Task PO is my reference to the extension field created in the Cloud Solution.
And the ExtensionForPO is my relation to the TaskID:
import AP.Common.GDT;
import AP.Purchasing.Global as Purchasing;
import AP.ProjectManagement.Global as ProjectManagement;
import AP.IS.CodingBlock.Global as Coding;
[Extension] businessobject AP.Purchasing.Global:PurchaseOrder {
[Relation(Coding:AccountingCodingBlockDistribution.AccountingCodingBlockAssignment.ProjectTaskKey.TaskID)]
[Label("Project ID")] element ExtensionForPO : TaskID;
node Item {
I am pretty sure this is not so hard, but I can't figure how to do it.
The Task ID is in the Line Item so I do not understand why it could be so hard to add it in the Purchase Order Header.
Moreover, when I try to make the path directly from the PurchaseOrder, like:
PurchaseOrder.Item.ItemAccountingCodingBlockDistribution.AccountingCodingBlockAssignment.ProjectTaskKey.TaskID
It returns to me that the association between Item and ItemAccountingCodingBlockDistribution is not a node. I know that, but it would be perfect if I could directly go from the Purchase Order BO to the Project Reference and the Project Tasks. But I cannot do that.
Any help on this would be greatly appreciated as it is quite a recurring request from customers.
I could have a misunderstanding in the process of doing it, or even in the code as I am a pure development newbie, so I m open to all propositions.
Thank you all.
Have a nice day.
Jacques-Antoine

Jacques-Antoine,
You can't directly translate a repeating node or element (such as an Item or a Project Task from the Accounting Coding Block of an Item) to a singular node or element.
The reason is that, though your use case may have the elements assumed to be the same for all items, this isn't necessarily the case, so ByDesign won't assume that you can use that kind of logic.
The simplest approach would be to do an On-Save at the Root node of the Purchase Order along the following lines:
this.projecttaskpo = this.Item.GetLast().ItemAccountingCodingBlockDistribution.AccountingCodingBlockAssignment.ProjectTaskKey.TaskID;
i wouldn't actually recommend this code.
You'd need validations for IsInitial, IsSet, and those kinds of functions.
i'd at least use some foreach loop to check that all the accounting coding blocks were for the same task, raise warnings if they weren't, etc.

Shipping tab is getting poplated in the Purchase order (STO Process)

HI Friends,
In Stock transfer order processs the shipping tab is getting poplated in the purchase order
I am using the docuemnt type UB Stock transfer order .
Error message: Not possible to determine shipping data for material "460000295"
Thanks,
Phani

Refer following SDN threads for reference/understanding for your requirement:
- STO - Not possible to Determine Shipping Data for Material.
- STO-Not possible to determine shipping data for material 1A0135J00VB-00M
- ERROR"Not possible to determine shipping data for material XXX"
- Not possible to determine shipping data for material
Regards
JP

Error in the purchase order price.

Hi
Can you show me the standard procedure to correct a price difference between the PO and the invoice for the following cases.
The PO was created in September/2010 with a price of 15.
The GR was conducted in September/2010 with the same price.
The invoice is from November/2010 with a price of 24.
I wanted to cancel the receipt, or the period is closed. On the other hand it handles no price difference account.
How can I fix this?
Thank you for your help

Hi,
Check price control of the material , it must be V, so the system valuates goods receipts with the purchase order price only . And as you have sufficient stock in invoiced quantity, the differences between the order price and the invoice price are debited to the stock account.
If no sufficient stock available in invoiced quantity or quantity is consumed or issued already before invoicing, then the difference between the order price and the invoice price is only posted an u201CExpenses/Revenue from price differencesu201D account
Regards,
Biju K

Following the Purchase Order sample

Similar Messages

Maybe you are looking for