Font has a strange behaviour

One of my fonts has a strange behaviour. Some characters print perfectly on screen but not on the printer, neither in the preview ???
I tried to de-install and re-install that particular font, but that did'nt help.
any clues ? thanks,
MJ

Here's the problem. It's a complete piece of junk.
The baseline is so far off on zero through nine that they're being just about pushed off the chart. Next, look at the glyph names. A-H are correct. From there on, you get some sort of bizarre numbering where the rest of the upper and lower case letter designations should be.
That this font ever worked is amazing.

Similar Messages

[SOLVED] French Canadian keyboard strange behaviour

Hello!
I just upgraded to Gnome 2.30 in [testing] and my keyboard has a strange behaviour. With Gnome 2.28, my keyboard layout was set to Canadian French (legacy), and still is, though some of the keys do not behave the same. For instance, the accents "`", "¸" and ^ do not behave as usual, but rather give me some letter with that accent on it, rather than letting me choose the letter on which put the accent.
Moreover, the SHIFT+3 combination gives me a # instead of a /, but not in all software. Google Chrome has the good behaviour, but gnome-terminal gives me a #.
Do you understand any of this?
I'll post the packages I have upgraded.
[2010-04-05 01:09] upgraded openssl (0.9.8n-1 -> 1.0.0-2)
[2010-04-05 01:09] upgraded python (2.6.5-2 -> 2.6.5-3)
[2010-04-05 01:09] upgraded pygobject (2.20.0-1 -> 2.21.1-1)
[2010-04-05 01:09] upgraded pygtk (2.16.0-2 -> 2.17.0-1)
[2010-04-05 01:09] upgraded gnome-menus (2.28.0.1-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded libsoup (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded libldap (2.4.21-1 -> 2.4.21-2)
[2010-04-05 01:09] upgraded libidl2 (0.8.13-1 -> 0.8.14-1)
[2010-04-05 01:09] upgraded orbit2 (2.14.17-1 -> 2.14.18-1)
[2010-04-05 01:09] upgraded gconf (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:09] upgraded gnome-keyring (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:09] upgraded heimdal (1.3.1-3 -> 1.3.2-1)
[2010-04-05 01:09] upgraded libsoup-gnome (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded gnome-icon-theme (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libgweather (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded evolution-data-server (2.28.3.1-1 -> 2.30.0-2)
[2010-04-05 01:10] upgraded gnome-desktop (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libwnck (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:10] upgraded libunique (1.1.6-1 -> 1.1.6-2)
[2010-04-05 01:10] upgraded gnome-disk-utility (2.28.1-1 -> 2.30.1-1)
[2010-04-05 01:11] upgraded libarchive (2.8.3-1 -> 2.8.3-3)
[2010-04-05 01:11] upgraded smbclient (3.5.1-1 -> 3.5.1-2)
[2010-04-05 01:11] upgraded gvfs (1.4.3-1 -> 1.6.0-1)
[2010-04-05 01:11] upgraded gnome-vfs (2.24.2-2 -> 2.24.3-2)
[2010-04-05 01:11] upgraded libbonobo (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded libgnome (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:11] upgraded libart-lgpl (2.3.20-1 -> 2.3.21-1)
[2010-04-05 01:11] upgraded libgnomecanvas (2.26.0-1 -> 2.30.1-1)
[2010-04-05 01:11] upgraded libbonoboui (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded librsvg (2.26.0-2 -> 2.26.2-1)
[2010-04-05 01:11] upgraded gnome-panel (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:11] upgraded libgnomeui (2.24.2-1 -> 2.24.3-1)
[2010-04-05 01:11] upgraded gnome-python (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:11] upgraded alacarte (0.12.4-2 -> 0.13.1-1)
[2010-04-05 01:11] upgraded apache (2.2.15-1 -> 2.2.15-2)
[2010-04-05 01:11] upgraded at-spi (1.28.1-1 -> 1.30.0-1)
[2010-04-05 01:11] upgraded totem-plparser (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded brasero (2.28.3-2 -> 2.30.0-1)
[2010-04-05 01:12] upgraded icu (4.2.1-1 -> 4.4-1)
[2010-04-05 01:12] upgraded brltty (4.1-2 -> 4.1-3)
[2010-04-05 01:12] upgraded libgtop (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:12] upgraded bug-buddy (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded cheese (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded clutter (1.0.10-1 -> 1.2.4-1)
[2010-04-05 01:12] upgraded clutter-gtk (0.10.2-1 -> 0.10.2-2)
[2010-04-05 01:12] upgraded libxklavier (4.0-1 -> 5.0-1)
[2010-04-05 01:12] upgraded libgnomekbd (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded gnome-settings-daemon (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:12] upgraded zenity (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:13] upgraded metacity (2.28.1-1 -> 2.30.0-2)
[2010-04-05 01:13] upgraded gnome-control-center (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:13] upgraded compiz-decorator-gtk (0.8.4-2 -> 0.8.4-3)
[2010-04-05 01:13] upgraded libcups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:13] upgraded openslp (1.2.1-2 -> 1.2.1-3)
[2010-04-05 01:13] upgraded cups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:13] upgraded curl (7.20.0-1 -> 7.20.0-2)
[2010-04-05 01:13] upgraded cvs (1.11.23-4 -> 1.11.23-5)
[2010-04-05 01:13] upgraded postgresql-libs (8.4.3-1 -> 8.4.3-2)
[2010-04-05 01:13] upgraded cyrus-sasl-plugins (2.1.23-1 -> 2.1.23-2)
[2010-04-05 01:13] upgraded cyrus-sasl (2.1.23-3 -> 2.1.23-4)
[2010-04-05 01:13] upgraded dbus-python (0.83.0-2.1 -> 0.83.1-1)
[2010-04-05 01:13] upgraded gnome-python-desktop (2.28.0-3 -> 2.30.0-1)
[2010-04-05 01:13] upgraded deskbar-applet (2.28.0-3 -> 2.30.0-1)
[2010-04-05 01:13] upgraded dnsutils (9.6.1-2 -> 9.6.1-3)
[2010-04-05 01:14] upgraded eog (2.28.2-2 -> 2.30.0-1)
[2010-04-05 01:14] upgraded libwebkit (1.1.15.4-3 -> 1.1.90-2)
[2010-04-05 01:14] upgraded gobject-introspection (0.6.6-1 -> 0.6.9-1)
[2010-04-05 01:14] upgraded epiphany (2.28.2-2 -> 2.30.0-1)
[2010-04-05 01:14] upgraded evince (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:14] upgraded gtkhtml (3.28.3-1 -> 3.30.0-1)
[2010-04-05 01:14] upgraded evolution-exchange (2.28.3-1 -> 2.30.0-2)
[2010-04-05 01:14] upgraded evolution-webcal (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:14] upgraded file-roller (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gcalctool (5.28.2-1 -> 5.30.0-1)
[2010-04-05 01:15] upgraded gconf-editor (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gnome-session (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gdm (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded gtksourceview2 (2.8.2-1 -> 2.10.0-1)
[2010-04-05 01:15] upgraded pygtksourceview2 (2.8.0-1 -> 2.10.0-1)
[2010-04-05 01:15] upgraded gedit (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:15] upgraded git (1.7.0.3-1 -> 1.7.0.4-1)
[2010-04-05 01:15] upgraded libsigc++2.0 (2.2.4.2-1 -> 2.2.5-1)
[2010-04-05 01:15] upgraded glibmm (2.22.1-1 -> 2.24.0-1)
[2010-04-05 01:15] upgraded gucharmap (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-applets (2.28.0-2 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-backgrounds (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded gnome-bluetooth (2.28.6-1 -> 2.30.0-1)
[2010-04-05 01:16] upgraded vte (0.22.5-1 -> 0.24.0-2)
[2010-04-05 01:16] upgraded gnome-desktop-sharp (2.26.0-3 -> 2.26.0-5)
[2010-04-05 01:16] upgraded gnome-doc-utils (0.18.1-1 -> 0.20.0-1)
[2010-04-05 01:17] upgraded gnome-games (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-games-extra-data (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-mag (0.15.9-1 -> 0.16.1-1)
[2010-04-05 01:17] upgraded gnome-media (2.28.5-1 -> 2.30.0-2)
[2010-04-05 01:17] upgraded gnome-netstatus (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:17] upgraded gnome-nettool (2.28.0-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-power-manager (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gnome-screensaver (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:17] upgraded gtkmm (2.18.2-1 -> 2.20.0-1)
[2010-04-05 01:17] upgraded gnome-system-monitor (2.28.0-1 -> 2.28.1-1)
[2010-04-05 01:18] upgraded system-tools-backends (2.8.3-1 -> 2.10.0-1)
[2010-04-05 01:18] upgraded liboobs (2.22.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded nautilus (2.28.4-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-system-tools (2.28.2-1 -> 2.30.0-2)
[2010-04-05 01:18] upgraded gnome-terminal (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gtk-engines (2.18.5-1 -> 2.20.0-1)
[2010-04-05 01:18] upgraded gnome-themes (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-user-share (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:18] upgraded gnome-utils (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded xulrunner (1.9.2.2-2 -> 1.9.2.3-1)
[2010-04-05 01:19] upgraded yelp (2.28.1-2 -> 2.30.0-1)
[2010-04-05 01:19] upgraded gnome2-user-docs (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded gok (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:19] upgraded grep (2.6.2-1 -> 2.6.3-1)
[2010-04-05 01:19] upgraded gstreamer0.10-bad (0.10.18-2 -> 0.10.18-3)
[2010-04-05 01:19] upgraded neon (0.28.6-2 -> 0.28.6-4)
[2010-04-05 01:19] upgraded gstreamer0.10-bad-plugins (0.10.18-2 -> 0.10.18-3)
[2010-04-05 01:19] upgraded hamster-applet (2.28.2-1 -> 2.30.0.1-1)
[2010-04-05 01:19] upgraded net-snmp (5.5-2 -> 5.5-3)
[2010-04-05 01:19] upgraded hplip (3.9.12-5 -> 3.10.2-1)
[2010-04-05 01:20] upgraded imap (2007e-1 -> 2007e-2)
[2010-04-05 01:20] upgraded jre (6u18-2 -> 6u19-2)
[2010-04-05 01:21] upgraded kdebase-workspace (4.4.2-1 -> 4.4.2-2)
[2010-04-05 01:21] upgraded kernel26-firmware (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded kernel26 (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded kernel26-headers (2.6.33.1-1 -> 2.6.33.2-1)
[2010-04-05 01:24] upgraded lib32-glib2 (2.22.5-1 -> 2.24.0-1)
[2010-04-05 01:24] upgraded lib32-atk (1.28.0-1 -> 1.30.0-1)
[2010-04-05 01:24] upgraded lib32-e2fsprogs (1.41.10-1 -> 1.41.11-1)
[2010-04-05 01:24] upgraded lib32-openssl (0.9.8n-1 -> 1.0.0-2)
[2010-04-05 01:24] upgraded lib32-heimdal (1.3.1-3 -> 1.3.2-1)
[2010-04-05 01:24] upgraded lib32-libcups (1.4.2-5 -> 1.4.3-2)
[2010-04-05 01:24] upgraded lib32-pango (1.26.2-1 -> 1.28.0-1)
[2010-04-05 01:24] upgraded lib32-gtk2 (2.18.9-2 -> 2.20.0-2)
[2010-04-05 01:24] upgraded lib32-libgl (7.7-1 -> 7.7.1-0.1)
[2010-04-05 01:24] upgraded lib32-libxml2 (2.7.6-2 -> 2.7.7-1)
[2010-04-05 01:24] upgraded lib32-mesa (7.7-1 -> 7.7.1-0.1)
[2010-04-05 01:24] upgraded lib32-qt (4.6.2-2 -> 4.6.2-3)
[2010-04-05 01:24] upgraded libepc (0.3.10-1 -> 0.3.11-1)
[2010-04-05 01:24] upgraded libfetch (2.30-1 -> 2.30-3)
[2010-04-05 01:24] upgraded libgail-gnome (1.20.1-1 -> 1.20.2-1)
[2010-04-05 01:24] upgraded libgdata (0.4.0-1 -> 0.6.4-1)
[2010-04-05 01:24] upgraded libgnomecups (0.2.3-6 -> 0.2.3-7)
[2010-04-05 01:24] upgraded libgnomeprint (2.18.6-2 -> 2.18.7-2)
[2010-04-05 01:24] upgraded libgnomeprintui (2.18.4-1 -> 2.18.5-1)
[2010-04-05 01:24] upgraded librpcsecgss (0.19-2 -> 0.19-3)
[2010-04-05 01:24] upgraded libssh (0.4.1-1 -> 0.4.1-3)
[2010-04-05 01:25] upgraded libxml++ (2.26.0-1 -> 2.30.0-1)
[2010-04-05 01:25] upgraded links (2.2-3 -> 2.2-4)
[2010-04-05 01:25] upgraded lynx (2.8.7-1 -> 2.8.7-2)
[2010-04-05 01:25] upgraded sbcl (1.0.35-1 -> 1.0.37-1)
[2010-04-05 01:25] upgraded maxima (5.20.1-2 -> 5.20.1-3)
[2010-04-05 01:25] upgraded mercurial (1.5-1 -> 1.5.1-1)
[2010-04-05 01:26] upgraded miro (2.5.4-4 -> 3.0-1)
[2010-04-05 01:26] upgraded mousetweaks (2.28.2-1 -> 2.30.0-1)
[2010-04-05 01:26] upgraded nasm (2.07-1 -> 2.08.01-1)
[2010-04-05 01:26] upgraded nautilus-actions (1.12.2-1 -> 2.30.0-1)
[2010-04-05 01:26] upgraded nautilus-open-terminal (0.18-1 -> 0.18-2)
[2010-04-05 01:26] upgraded nautilus-sendto (2.28.2-1 -> 2.28.4-1)
[2010-04-05 01:26] upgraded samba (3.5.1-1 -> 3.5.1-2)
[2010-04-05 01:26] upgraded nautilus-share (0.7.2-4 -> 0.7.2-5)
[2010-04-05 01:26] upgraded network-manager-applet (0.8-2 -> 0.8-3)
[2010-04-05 01:26] upgraded nfs-utils (1.2.2-1 -> 1.2.2-2)
[2010-04-05 01:26] upgraded nmap (5.21-1 -> 5.21-2)
[2010-04-05 01:26] upgraded ptlib (2.6.5-1 -> 2.6.5-2)
[2010-04-05 01:27] upgraded opal (3.6.6-1 -> 3.6.6-2)
[2010-04-05 01:27] upgraded openntpd (3.9p1-10 -> 3.9p1-11)
[2010-04-05 01:28] upgraded openoffice-base (3.2.0-1 -> 3.2.0-3)
[2010-04-05 01:28] upgraded openssh (5.4p1-3 -> 5.4p1-4)
[2010-04-05 01:28] upgraded openvpn (2.1.1-1 -> 2.1.1-2)
[2010-04-05 01:28] upgraded orca (2.28.3-1 -> 2.30.0-1)
[2010-04-05 01:28] upgraded perl-crypt-ssleay (0.57-3 -> 0.57-4)
[2010-04-05 01:28] upgraded perl-uri (1.52-1 -> 1.54-1)
[2010-04-05 01:28] upgraded php (5.3.2-4 -> 5.3.2-6)
[2010-04-05 01:28] upgraded php-apache (5.3.2-4 -> 5.3.2-6)
[2010-04-05 01:28] upgraded pixman (0.16.6-1 -> 0.18.0-1)
[2010-04-05 01:28] upgraded postfix (2.7.0-1 -> 2.7.0-2)
[2010-04-05 01:28] upgraded qt (4.6.2-2 -> 4.6.2-3)
[2010-04-05 01:28] upgraded qtscriptgenerator (0.1.0-3 -> 0.1.0-4)
[2010-04-05 01:29] upgraded rhythmbox (0.12.7-1 -> 0.12.8-1)
[2010-04-05 01:29] upgraded ruby (1.9.1_p378-1 -> 1.9.1_p378-2)
[2010-04-05 01:29] upgraded seahorse (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:29] upgraded seahorse-plugins (2.28.1-1 -> 2.30.0-1)
[2010-04-05 01:29] upgraded sound-juicer (2.28.1-2 -> 2.28.2-1)
[2010-04-05 01:29] upgraded subversion (1.6.9-2 -> 1.6.9-4)
[2010-04-05 01:29] upgraded syslog-ng (3.0.4-3 -> 3.0.4-4)
[2010-04-05 01:29] upgraded telepathy-glib (0.10.1-1 -> 0.10.2-1)
[2010-04-05 01:29] upgraded tomboy (1.1.0-1 -> 1.2.0-2)
[2010-04-05 01:29] upgraded totem (2.28.5-2 -> 2.30.0-1)
[2010-04-05 01:29] upgraded transmission-gtk (1.92-1 -> 1.92-2)
[2010-04-05 01:30] upgraded vala (0.7.10-1 -> 0.8.0-1)
[2010-04-05 01:30] upgraded vinagre (2.28.1-2 -> 2.30.0-1)
[2010-04-05 01:30] upgraded vino (2.28.1-3 -> 2.28.2-1)
[2010-04-05 01:30] upgraded virtuoso (6.1.0-1 -> 6.1.0-2)
[2010-04-05 01:30] upgraded wget (1.12-1 -> 1.12-2)
[2010-04-05 01:30] upgraded wpa_supplicant (0.6.10-1 -> 0.6.10-2)
[2010-04-05 01:30] upgraded xorg-server (1.7.6-2 -> 1.7.6-3)
[2010-04-05 01:30] upgraded xorg-xinit (1.2.0-1 -> 1.2.1-1)
[2010-04-05 01:30] upgraded xterm (255-1 -> 256-1)
[2010-04-05 09:21] upgraded fofix-svn (1991-1 -> 2038-1)
[2010-04-05 12:31] upgraded gloobus-preview-bzr (212-1 -> 214-1)
Last edited by valandil (2010-04-06 16:52:28)

Problem solved!
I remembered I once configured my keyboard with HAL and /etc/hal/fdi/policy/10-keymap.fdi was set to xkb.layout=ca and xkd.variant=fr. I changed the GDM layout to Canada and removed the xkb.variant=fr from the .fdi file and everything was fixed!

APEX Listener and EPG - strange behaviour

Hi
For some years, I've used EPG for APEX but have struggled with performance particularly as I can have up to 150 student developers using at any one time.
I do a fair amount of work using ORDImage and have successfully developed APEX applications to upload image files and display full-size and thumbnail images.
After upgrading to APEX 4.1 (from 4.0), I decided to install APEX Listener standalone.
Before I did so I checked that my applications still worked in 4.1 and they did.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.
Configuring APEX Listener and running the same application through that DOES display the images.
So this part of the application works under APEX Listener but not under EPG.
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank page with a wwv_flow.accept URL although the image does indeed upload. Under EPG it works as expected and I get a success confirmation.
So this part of the application works under EPG but not under APEX Listener.
Has anyone else come across different behaviour depending on the mode of connection?
Thanks
Brian
[Oracle EE 11gR2, Windows Server 2008R2, APEX 4.1, APEX Listener 1.1.3]

Hi Brian,
it sounds like you have both EPG and APEX Listener running on the same machine, so your problem might result from a port conflict. Note that both services use TCP port 8080 as default.
At least a port conflict would explain the strange behaviour in your case, some things working on one web server and some on the other.
Some parts of your initial post hint to that direction, e.g.
However, just installing APEX Listener but not configuring it (yet) has meant that my image display in a report using a procedure based on >wpg_docload.download_file( l_ordimage_image.source.localData ) no longer works in EPG - the images are not displayed.... because the APEX Listener only interfere with the EPG if it is at least running on the same machine as your database and furthermore, if it is unconfigured in terms of ist database connection, a port conflict might be the only way it could cause anything like that.
However, if you are sure that's not the issue, please check if you see any error in the APEX Listener's log for the following action you performed:
My application also allows users to upload images from APEX_APPLICATION_FILES using standard code. Under APEX Listener after uploading, I'm left with a blank >page with a wwv_flow.accept URL although the image does indeed uploadIf you actually see just a blank screen, something very bad must have happened and you should see some kind of stack trace there.
For further investigations, if necessary, it would be helpful to know how you deployed or started your APEX Listener and which JDK version you use.
For the moment, I still think the port conflict is my best guess.
You could avoid it by either changing the port for EPG (I'd not recommend that if you have other users still using it) or by changing the port for your APEX Listener.
-Udo

Report S_ALR_87013542 strange behaviour

Hi All,
Report S_ALR_87013542 - Actual/Comm/Total/Plan in COAr crcy - is showing up cross signs in some of the columns.When the cross sign (like any other column value) is clicked the line item detail are sown correctly.
Has anybody encountered this kind of issue before ?
I googled and searched various forums but all in vain.
Please provide inputs to correct this strange behaviour of Report S_ALR_87013542. Thanks!
Regards
Dev

Hello Dev,
Did you execute report RKACOR04 for the affected object number and checked if this still happens ?
Suresh Jayanthi.

View Master mode strange behaviour with jpg files

Hy all,
I'm using Aperture, and I'm tweakin a lot the SW to discover all secrets ....
I'm really concerned about a strange behaviour of the SW in view mode.
If I open a jpg file, do not apply ANY modification, and apply the "show master" command (pressing M), there's a subtle behaviour :
*the images get sharper !!!!*
It behaves as if an "edge sharpening" was applied !!!!!!
With _RAW files this thing doesn't happen at all._
Even stranger, if I zoom to full definition (by pressing Z), and toggle between normal view and "show master" view, the immage remains the same !
The effect is not so evident with all images, but sometimes it is !!
Anyway, I expect not to have such kind of things with a professional SW.
With professional cameras and good quality files it's really annoying not to beeing sure what's the REAL content of the jpg image.
Has anyone noted this thing ? Is there a reasonable explanation ?
The only one I tried to figure out is the following : may be Aperture applies some kind of resampling algorithm with jpg files (bicubic, bilinear, etc).
May be this resampling is not applied with 100% magnification, as weel as with raw files.
But it's only my guessing. Now, I'm tweaking other viewers and other SW to understand what's the real jpg image stored in the file : the blurer one form normal view or the sharper one with "show master" mode.
I stress once again : of course, the jpg file I'm talking about have no settings at all, just imported and toggled with M button.
Thanks in advance.
Regards,
Enzo

Hy,
I'm afraid I'm not been clear.
The problem is this :
1) jpg image opened in normal view mode, no zoom, (no quick preview, of course) : image with a certain amount of blour
2) jpg image opened in show master mode, no zoom, (no quick previre, of course) : image SHARPER with respect with the previous.
No edit applied from import, so "show master" command shouln't apply any change in rendering, should it ?
The only thing I said on 100% view is that such difference (between normal mode e show mastermode) is not present with 100% magnification.
That was the issue.
Enzo

Strange behaviour from new 2012R2 in old domain

Hi all,
At work (education level), I'm starting to take charge of windows admin, so beiing a noob admin I'm finding strange behaviours that I hope you can help me solve them all :-)
We've one (big) domain with about 5000 computers (workers and students all together), and around 50000 users (again, workers and students all together) setup like this:
DC-DOMAIN-1:
Windows Server 2008R2
Shares NETLOGON and SYSVOL
DC-DOMAIN-2:
Windows Server 2003 R2 x64
Shares CertEnroll, NETLOGON, SMSLOGON, SYSVOL
Checking RootDSE, I see 'domainControllerFunctionaly is Windows 2003' (DC-DOMAIN-2)
So, with this setup, I've noticed these strange behaviours, hope list isn't too big (guess there will be more behaviours but these seemed too odd):
1) On DC-DOMAIN-2, WinServer 2003 eventlog, inside 'Directory Service', I found this warning event ID 1083 (Source NTDS Replication):
Active Directory could not update the following object with changes received from the domain controller at the following network address because Active Directory was busy processing information.
Object:CN=<an user name>, CN=Users, DC=DOMAIN
Usually followed by an information event (eventid 1955) which says:
ctive Directory encountered a write conflict when applying replicated changes to the following object.
Object:
<SAME USER OBJECT THAN PREVIOUS EVENT ID>
Time in seconds:
0
Event log entries preceding this entry will indicate whether or not the update was accepted.
A write conflict can be caused by simultaneous changes to the same object or simultaneous changes to other objects that have attributes referencing this object. This commonly occurs when the object represents a large group with many members, and the functional level of the forest is set to Windows 2000. This conflict triggered additional retries of the update. If the system appears slow, it could be because replication of these changes is occurring.
User Action
Use smaller groups for this operation or raise the functional level to Windows Server 2003.
And having as result that user being blocked in domain.
2) I've added a new print server based on Windows Server 2012R2 (running inside an updated ESX 5.5 with VMXNET3 ethernet adapter as recommended by vmware), and seen in the event viewer these warnings/errors:
At System log:
Error Event ID 5783, Source NETLOGON:
The session setup to the Windows NT or Windows 2000 Domain Controller \\DC-DOMAIN-2.fulldns.name for the domain DOMAIN is not responsive. The current RPC call from Netlogon on \\PRINTSERVER to \\DC-DOMAIN-2.fulldns.name has been cancelled.
I've seen Event ID 5783 with DC-DOMAIN-1 too....
Error Event ID 5719, Source NETLOGON:
This computer was not able to set up a secure session with a domain controller in domain DOMAIN due to the following:
The remote procedure call failed and did not execute.
This may lead to authentication problems. Make sure that
this computer is connected to the network. If the problem persists, please contact your domain administrator.
ADDITIONAL INFO:
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.
At Microsoft-Windows-TerminalServices-RemoteConnectinoManager/Admin found also this warning:
Warning Event ID 20499 Source TerminalServices-RemoteConnectionManager:
Remote Desktop Services has taken too long to load the user configuration from server \\DC-DOMAIN-2.fulldns.name for user administrator
3) If I try Group Policy Modeling on DC-DOMAIN-1 (server 2008R2), everything works fine, no matter if I try it against DC-DOMAIN-1 or DC-DOMAIN-2, but if I try this from the Server 2012R2 (the one from point 2), I get this:
Simulation against DC-DOMAIN-2: Gets executed, but all GPO show as inaccessible, empty or disabled.
Simulation against DC-DOMAIN-1: Sometimes it gets executed as DC-DOMAIN-2, sometimes I get an error saying query can't be executed.
4) From server 2012R2, I usually manage printing GPO. If I click on the domain root (GPMC, forest, Domains, DOMAIN-NAME-ROOT) right pane, I get a pop up saying:
'A processing error ocurred collecting data using this base domain controller. Please change the base domain controller and try again'
After closing popup, right pane says something like 'DC-DOMAIN-2.fulldns.name' is the baseline domain controller for this domain.
No infrastructure Status information exists for this domain.
Click the Detect Now button below to gather infrastructure status from all of the domain controllers in this domain.
Pressing 'Detect Now' does nothing, and trying to select New Baseline DC shows again same pop up than before.
5) Last, but not least, I've feeling that GPO takes too much to apply. I've found scenarios in which even after executing 'gpupdate /force' correctly on client computer either local or domain admin, I can't see the new changes (gpresult says it has been
updated though). But couldn't find anything on eventlog that informs about problems with GPOs...
For all these strange behaviours I've noticed in last month that I started checking things as sys admin, I believe domain is damaged, or something is wrong there (not just my new server 2012R2, even if it's running inside an ESX, blehh), so please, any hint
on what to check, what to change, what to fix, would be highly appreciated.
Thanks in advance.

Hi Paul,
Honestly, I'm still trying to figure out all broken things reported by tests :( Guess Jesper's suggestion about adding a new 2008 DC to get rid of 2003 and start checking again after that may be best option.
I'll try to summarize list of things I believe are wrong:
running
DCDIAG /V /C /D /E /s:yourdcname > c:\dcdiag.log for every DC, shows different errors. They show things such as:
another domain running here (not administered by us, only relationship is that our users are shared with that domain, nothing else) appear when Printing out pDsInfo (as if they were DC of our domain too, but they do not even share RootDomain). Guess it
may be for a bug old sys admin had when clonning from his 2008R2 template, that forgot to change SID... I already noticed 1 year ago our print server shared SID with those DC, guess there may be more servers sharing SID too :-(
Within Starting test: Replications, I see few messages at Replication Latency Check, such as the one for CN=Schema, CN=Configuration, DC=<ourdomain>:
Latency information for 35 entries in the vector were ignored.
35 were retired Invocations. 0 were either: read-only replicas and are not verifiably latent, or dc's no longer replicating this nc. 0 had no latency information (Win2K DC)
On Services test, I see an
Invalid service type: RpcSs on DC-DOMAIN-3, current value
WIN32_OWN_PROCESS, expected value WIN32_SHARE_PROCESS
On SystemLog, I see LOTS of warnings/errors such as:
A warning event occurred. EventID: 0x80000002
Time Generated: 07/28/2014 08:21:54
(Event String (event log = System) could not be retrieved, error
0x503)
An error event occurred. EventID: 0xC0000003
Time Generated: 07/28/2014 08:22:18
(Event String (event log = System) could not be retrieved, error
0x3afc)
Missing entries on DNS (we've a static DNS)
netdiag.exe /v > c:\netdiag.log Showed again DNS problems such as our primary DNS pointing to all DC, secondary
DNS pointing just to DC with FSMO roles,...
repadmin.exe /showrepl * /verbose /all /intersite > c:\repl.txt Gave no errors, now I must check in detail
if every replica is correct
And finally,
dnslint /ad /s "ip address of your dc" gave more DNS problems:
One or more DNS servers may not be authoritative for the domain
One or more DNS servers did not respond to UDP queries
One or more zone files may have expired
SOA record data was unavailable and/or missing on one or more DNS servers
Sumarizing, guess it will be better to fix DNS problems, promote new 2008R2 DC to get rid of 2003 one, promote domain to 2008 too, check again for messages and relationship with other domain, and then come back here for support if needed
EDIT: Almost forgot to talk about SYSVOL folder. As said before, there are 426 GPO folders inside Policies. Of them, 375 have an inetres.adm files in it (smallest one 1398 KB, almost all of them 2307 or 2707 kb)....

Strange behaviour with Safari.

Very strange behaviour with Safari this morning. Pages loading piecemeal or partially. The content only becomes viewable after the cursor has passed over the area. Have cleared caches and reported it but I'm wondering if this is a local matter here in the UK. Anyone suffering similar problems? Firefox is responding perfectly normally.

I see a reply has come back via a previous post. As I am trying to get a response to this one I shan't reply there but I should point out that for me, this is an isolated problem. I do use open DNS but with no track history of problems there , I can't blame that.
In the last few minutes normality has returned.

Strange behaviour - any ideas?

Strange behaviour began when i was unable to open a new page in photoshop.
The next day i was unable to print from word or photoshop or emails.
However i could print from freehand and excel!
I used disk 1 to verify and repair disk.
this did not solve the problem as then when i tried to open Safari the toolbar opened but no window.
I have reinstalled the operating system making an archive but this also has not had an effect.
Any ideas on what to do next or should I just reinstall the operating system over the old one?
many thanks 4 any help

Sarah, to help the knowlegable users here please advise which model G5 iMac you have & include this info in your system info preference by clicking on the "My Settings" link in the right hand column.-->
This way, you won't have to keep repeating yourself and the knowlegable users will be able to provide you with the correct trouble shooting information/solutions if the problem is your computer.
Also, it will be helpful if you will advise which version of Word, Photoshop you have, which email program & the type of printer you are using.
Thank you.

Strange behaviour on text insert into a HTML pane

Hi all,
I am trying to fix a problem on inserting a span tag into an existing html page (in an EDITABLE JEditorPane).
The behaviour:
Assuming the cells in a table (3 rows, 2 columns) are numbered from 1 to 6, with cell one being the top left most, cell 2 top right, cell 3 middle left, etc.
1. Inserting the text "" in cell 4 causes during any attempt to later type into cell 5 the characters to be appended instead into cell 4, directly after the close span tag.
2. The insertion in the first place behaves strange. If I have the caret positioned for cell 5 so that I can insert there
(via the function void javax.swing.text.html.HTMLEditorKit.insertHTML(HTML Document doc, int offset, String html, int popDepth, int pushDepth, Tag insertTag) )
even though the caret position is visible in cell 5, the insertion seems to take place in cell 4.
I can sort of compensate for this by adding 1 to the offset. However, then when inserting into a line of text, for example, "the quick red fox jumped over the lazy dog"
I insert directly before the 'j' in 'jumped', the insertion looks like this "the quick red fox j..umped over the lazy dog"
So that is no solution.
IMPORTANT! Just to prove it is not the span tag causing the trouble, if this span tag already exists in a cell on 'Load' of the html file, the strange behaviour is not observed.
Something is going wrong here. It is me? Or is it a bug?
Please help!!
Here is a test app, and the test html you can use (place in current directory).
Please test like this:
1. run application (the html should be loaded into the pane)
2. the span tag is programmed to automatically insert at cell 4 (by using the +1 method on the insert)
3. another span tag was already existing in the html file, at cell 8
4. Attempt to type into cell 5
result: the text appears instead at cell 4
5. Type into cell 9
result: the text correctly is entered into cell 9
See the difference!!
Help!
The test java app:
package small.test;
import java.awt.BorderLayout;
import java.awt.Container;
import java.io.File;
import java.io.FileReader;
import java.io.IOException;
import java.io.StringReader;
import javax.swing.JEditorPane;
import javax.swing.JFrame;
import javax.swing.JPanel;
import javax.swing.JScrollPane;
import javax.swing.SwingUtilities;
import javax.swing.text.JTextComponent;
import javax.swing.text.html.HTML;
import javax.swing.text.html.HTMLDocument;
import javax.swing.text.html.HTMLEditorKit;
import javax.swing.text.html.parser.ParserDelegator;
public class HtmlInsertTest extends JEditorPane
 public HtmlInsertTest()
 public static void main(String args[])
 JFrame frame = new JFrame("Loading/Saving Example");
 Container content = frame.getContentPane();
 frame.setSize(600, 600);
 final HtmlInsertTest editorPane = new HtmlInsertTest();
 editorPane.setEditable(true);
 JScrollPane scrollPane = new JScrollPane(editorPane);
 content.add(scrollPane, BorderLayout.CENTER);
 editorPane.setEditorKit(new HTMLEditorKit());
 JPanel panel = new JPanel();
 content.add(panel, BorderLayout.SOUTH);
 frame.setSize(600, 600);
 doLoadCommand(editorPane);
 editorPane.insertHTML("inserted text", 84);
 frame.setVisible(true);
 public static String getHTML()
 return
 "<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 4.0 Transitional//EN\">"+
 "<HTML>"+ "<HEAD>"+
 " <META HTTP-EQUIV=\"CONTENT-TYPE\" CONTENT=\"text/html; charset=utf-8\">"+
 " <TITLE></TITLE>"+
 "</HEAD>"+
 "<BODY LANG=\"en-AU\" DIR=\"LTR\">"+
 "This is a test xhtml document. "+
 " "+
 " "+
 " "+
 " Here is a table:"+
 " "+
 " "+
 " "+
 " <TABLE WIDTH=100% BORDER=1 BORDERCOLOR=\"#000000\" CELLPADDING=4 CELLSPACING=0>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>"+
 " It has"+
 " </TD>"+
 " <TD WIDTH=50%>"+
 " 2 columns"+
 " </TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%>And 4 rows</TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%>existing text</TD>"+
 " </TR>"+
 " <TR VALIGN=TOP>"+
 " <TD WIDTH=50%></TD>"+
 " <TD WIDTH=50%></TD>"+
 " </TR>"+
 " </TABLE>"+
 " "+
 " "+
 " "+
 " "+
 " "+
 " "+
 " We will test the drag and drop"+
 " functionality with this document. "+
 " "+
 " It will be loaded with the hlml editor."+
 " "+
 " "+
 " "+
 " "+
 " </BODY>"+
 " </HTML>";
 public static void doLoadCommand(JTextComponent textComponent)
 StringReader reader = null;
 try
 System.out.println("Loading");
 reader = new StringReader(getHTML());
 // Create empty HTMLDocument to read into
 HTMLEditorKit htmlKit = new HTMLEditorKit();
 HTMLDocument htmlDoc = (HTMLDocument)htmlKit.createDefaultDocument();
 // Create parser (javax.swing.text.html.parser.ParserDelegator)
 HTMLEditorKit.Parser parser = new ParserDelegator();
 // Get parser callback from document
 HTMLEditorKit.ParserCallback callback = htmlDoc.getReader(0);
 // Load it (true means to ignore character set)
 parser.parse(reader, callback, true);
 // Replace document
 textComponent.setDocument(htmlDoc);
 System.out.println("Loaded");
 catch (Exception exception)
 System.out.println("Load oops");
 exception.printStackTrace();
 finally
 if (reader != null)
 reader.close();
 public void insertHTML(String text, int offset)
 SwingUtilities.invokeLater(new insertAction(this, text, offset));
 class insertAction implements Runnable
 String text = "";
 int offset = 0;
 JEditorPane jEditorPane1 = null;
 public insertAction(JEditorPane _jEditorPane1, String _text, int _offset)
 jEditorPane1 = _jEditorPane1;
 text = _text;
 offset = _offset;
 @Override
 public void run()
 HTMLDocument doc = (HTMLDocument)jEditorPane1.getDocument();
 HTMLEditorKit kit = (HTMLEditorKit)jEditorPane1.getEditorKit();
 try
 System.out.println("reading from string reader");
 kit.insertHTML( doc,
 offset,//+1
 text,
 0,//0
 0,//0
 HTML.Tag.SPAN);
 System.out.println(jEditorPane1.getText());
 catch (Exception e)
 System.out.println("error inserting html: " + e);
}Edited by: svaens on Jul 16, 2009 6:34 PM
fix another stuffed up attempt at a SSCCE.

Well, I know nothing about HTML in JEditorPanes. I have never been able to figure out how insertions work.
My comment was a warning to others. Some people (like me) avoid answering posting of this type for reasons given in the JavaRanch link. Others will answer anyway. Other might first check the other site to see if they are wasting there time, but they can only do that if a link was posted with the original question.
The only suggestion I have is to repost the question, (since this posting is now completely off topic) making sure to then respond to this posting stating that a fresh question has been asked so you don't get a discussion going on in two places.

IPhoto: strange behaviour with preview thumbnails

Is there a simple way in iPhoto 8 to rebuild the thumbnail database?
I recently noticed a strange behaviour iPhoto 8 has with previews: In some of my event categories, iPhoto does not display the correct preview thumbnail of the picture, but a preview thumbnail of another event. When I click on the thumbnail, it reloads the appropriate preview and it does not happen again - with that picture. Also, if I double click an event to open it, the small thumbnail of the event's key photo that is to be displayed in the title bar (next to the All Events button) is not always correct.
Thank you for your help!
Stefan

I have similar problems (lately) with iPhoto 6.0.6 -- thumbnails do not equal the images they 'thumbnail' of.
Sometimes when it opens, it (recently) asked me to rebuild the thumbnails, but not always.
Can I force a thumbnail rebuild using the command you gave - Apple-option while opening iPhoto? In iPhoto 6.0.6 this primarily forces a new selection of a library.

How to delete duplicates in oracle 10g ( strange behaviour)

Recently we migrated from oracel 8i to oralce 10g and we face this problem.
When we try to delete duplicates using rowid ( analytical functions row_number()/
or normal delete ) and commit the same , still we find some duplicates to be existing because of which we are not able to enable costriants and resulting in process failure.
When we run the same delete statement next time it removes more duplicates than the required or sometimes required duplicates resulting in abnormal behaviour.
I don not understand this strange behaviour after upgrading to oracle 10g.
It'd be great if some one who has idea on this can throw light on the same.
thanks

Gasparotto,
Thanks a lot for letting me know a new procedure to delete duplicates sing lead function.
I've tried this code on a temp table and it worked, let me use the same query on the prodn side and test the same.
Procedure for deletion of duplicates using lead analytical function.
create table temp ( col1 number(2) , col2 number(2) , col3 number(2));
insert into temp values ( 1,2,10);
insert into temp values ( 1,2,20);
insert into temp values ( 1,2,30);
insert into temp values ( 3,2,10);
insert into temp values ( 3,4,12);
insert into temp values ( 3,4,45);
commit;
COL1 COL2 COL3
1 2 10
1 2 20
1 2 30
3 2 10
3 4 12
3 4 45
select col1,col2 , col3, LEAD(rowid) OVER (PARTITION BY col1,col2 order by null) from temp;
COL1 COL2 COL3 LEAD(ROWID)OVER(PA
1 2 10 AAAVBjAApAAAFyGAAB
1 2 20 AAAVBjAApAAAFyGAAC
1 2 30
3 2 10
3 4 12 AAAVBjAApAAAFyGAAF
3 4 45
6 rows selected.
select rowid , temp.* from temp ;
ROWID COL1 COL2 COL3
AAAVBjAApAAAFyGAAA 1 2 10
AAAVBjAApAAAFyGAAB 1 2 20
AAAVBjAApAAAFyGAAC 1 2 30
AAAVBjAApAAAFyGAAD 3 2 10
AAAVBjAApAAAFyGAAE 3 4 12
AAAVBjAApAAAFyGAAF 3 4 45
SQL> DELETE temp
WHERE rowid IN
( SELECT LEAD(rowid) OVER (PARTITION BY col1, col2 ORDER BY null)
FROM temp ); 2 3 4
3 rows deleted.
SQL> select rowid , temp.* from temp ;
ROWID COL1 COL2 COL3
AAAVBjAApAAAFyGAAA 1 2 10
AAAVBjAApAAAFyGAAD 3 2 10
AAAVBjAApAAAFyGAAE 3 4 12
Thanks for the reply

Strange behaviour of view based on several tables join with union all

Dear fellows we r facing a strange problem we have a view based on several tables joined by union all ,when we issue an ordered query on date,rows returned are unusually different than they should be .
Is oracle has some special behaviour for view based on union all ?
I m using oracle 8.1.6 on windows 2000
Kashif Sohail

Did you ever solve this problem? I have two select statements based on 4 tables and 3 views using about 5 more tables. When I execute each select individually I get exactly what is expected. When I UNION ALL both selects together, I get "no rows returned", however when I UNION them I get exactly what is expected. I should get the same answer for both UNION ALL and UNION. The two select statements are identical, except for one column where I changed the constant to be different. Any thoughts?

Strange behaviour BOXI R2

Post Author: Ermakov Alexey
CA Forum: .NET
using System;using System.Data;using System.Configuration;using System.Web;using System.Web.Security;using System.Web.UI;using System.Web.UI.HtmlControls;using System.Web.UI.WebControls;using CrystalDecisions.Enterprise;using BusinessObjects.ReportEngine;using BusinessObjects.Enterprise.Desktop;using System.IO;using System.Runtime.InteropServices;using System.Collections;namespace BusinessObjectsInteroperation{ public class BusinessObjectsInterop { public void GetBinaryReportByName(string NameOfTheReport, Stream StreamForDataBeWritten, BOConfigs BOCfg, OutputFormatType OutputFormat, Hashtable PromptValues) { EnterpriseSession enterpriseSession = null; ReportEngines reportEngines = null; SessionMgr sessionMgr = new SessionMgr(); try { enterpriseSession = sessionMgr.Logon(BOCfg.BO_LoginName, BOCfg.BO_Password, BOCfg.BO_MachineToConnect, BOCfg.BO_LoginType); } catch (COMException exc) { int HRESULT = exc.ErrorCode; switch (HRESULT) { case -2147210751: throw new ArgumentException(" BO_MachineToConnect"); case -2147211005: throw new ArgumentException(" BO_LoginName"); case -2147211006: throw new ArgumentException(" BO_Password"); case -2147210653: throw new ArgumentException(" BO_LoginType"); default: throw new ArgumentException(""); } } InfoStore iStore = (InfoStore)enterpriseSession.GetService("InfoStore"); UserInfo userInfo = enterpriseSession.UserInfo; if (enterpriseSession != null) { if (reportEngines == null) { int iMinuteNumber = 1; int iLogonNumber = 1; string strToken = enterpriseSession.LogonTokenMgr.CreateWCAToken("", iMinuteNumber, iLogonNumber); reportEngines = new ReportEngines(strToken); } } IReportEngine reportEngine = reportEngines.getService(ReportEngineType.FC_ReportEngine); FullClient ReportToPrint = (FullClient)getReport(iStore, NameOfTheReport, CrystalDecisions.Enterprise.InfoStore.CeKind.FullClient); IDocumentInstance doc = null; try { doc = reportEngine.OpenDocument(ReportToPrint.ID); //ERROR Happens here } catch(Exception e) { Console.Write(e.StackTrace); } doc.Refresh(); IPrompts prompts = doc.GetPrompts(); foreach (IPrompt ip in prompts) { string OnlyOneValue=""; try { OnlyOneValue = (string)PromptValues[ip.Name]; } catch(IndexOutOfRangeException exc) { throw new ArgumentException(String.Format("Отчет {0} имеет необходимый параметр , который не был предоставлен.", NameOfTheReport, ip.Name), exc); } string[] vlArr = ; //Почему одному IPrompt надо передавать массив значений остается загадкой. ip.EnterValues(vlArr); } doc.SetPrompts(); IBinaryView docBinaryView = (IBinaryView)doc.GetView(OutputFormat); docBinaryView.WriteContent(StreamForDataBeWritten); doc.CloseDocument(); reportEngine.Close(); reportEngines.Close(); iStore.Dispose(); enterpriseSession.Logoff(); enterpriseSession.Dispose(); } private InfoObject getReport(InfoStore iStore, string Name, string Kind) { InfoObjects list = null; string query = String.Format(@" SELECT SI_ID, SI_NAME, SI_PARENTID, SI_KIND, SI_INSTANCE, SI_DESCRIPTION FROM CI_INFOOBJECTS WHERE SI_KIND='{0}' AND SI_NAME=''", Kind, Name); list = iStore.Query(query); if (list.Count == 0) { throw new Exception(String.Format("На сервере не существует отчета с именем {0}, его необходимо создать. Либо у вас нет на него прав.", Name)); } if (list.Count > 1) { throw new Exception(String.Format("На сервере существует более одного отчета с именем {0}, удалите неверный.", Name)); } foreach (InfoObject obj in list) { return obj; } return null; } public void ReportInPdfToHTTPResponse(string NameOfTheReport, params Par[] Prompts) { Hashtable PromptValues = new Hashtable(); foreach (Par p in Prompts) { PromptValues.Add(p.Key, p.Value); } HttpResponse Response = HttpContext.Current.Response; Response.Clear(); Response.ContentType = "application/pdf"; Response.AddHeader("Content-Type", "application/pdf"); Response.Expires = 0; GetBinaryReportByName(NameOfTheReport, Response.OutputStream, new BOConfigs(), OutputFormatType.Pdf, PromptValues); Response.Flush(); Response.End(); } public void ReportInXlsToHTTPResponse(string NameOfTheReport, params Par[] Prompts) { Hashtable PromptValues = new Hashtable(); foreach (Par p in Prompts) { PromptValues.Add(p.Key, p.Value); } HttpResponse Response = HttpContext.Current.Response; Response.Clear(); Response.ContentType = "application/vnd.ms-excel"; Response.AddHeader( "Content-Type", "application/vnd.ms-excel"); Response.Expires = 0; GetBinaryReportByName(NameOfTheReport, Response.OutputStream, new BOConfigs(), OutputFormatType.Xls, PromptValues); Response.Flush(); Response.End(); } } } I have this code, but it has strange behaviour.When I restart IIS and run this function first time, I get an ArgumentOutOfRangeException in reportEngine.OpenDocument(ReportToPrint.ID);But the most strange thing is that Visual Studia shows me exception dialog and if I press Continue, then it works good.On more strange thing I get about this Code. From time to time server shows me such error:An unhandled exception of type 'BusinessObjects.ThirdParty.OOC.OB.AssertionFailed' occurred in businessobjects.enterprise.sdk.netmodule Additional information: ORBacus encountered an internal error

Post Author: Ermakov Alexey
CA Forum: .NET
mscorlib.dll!System.String.LastIndexOf(char value, int startIndex) + 0x13 bytes log4net.dll!log4net.Repository.Hierarchy.Hierarchy.UpdateParents(log4net.Repository.Hierarchy.Logger log = {log4net.Repository.Hierarchy.DefaultLoggerFactory.LoggerImpl}) + 0x1cf bytes log4net.dll!log4net.Repository.Hierarchy.Hierarchy.GetLogger(string name = ".cctor", log4net.Repository.Hierarchy.ILoggerFactory factory = {log4net.Repository.Hierarchy.DefaultLoggerFactory}) + 0x12b bytes log4net.dll!log4net.Repository.Hierarchy.Hierarchy.GetLogger(string name = ".cctor") + 0x46 bytes log4net.dll!log4net.Core.LoggerManager.GetLogger(System.Reflection.Assembly repositoryAssembly = {System.Reflection.Assembly}, string name = ".cctor") + 0x94 bytes log4net.dll!log4net.LogManager.GetLogger(System.Reflection.Assembly repositoryAssembly = {System.Reflection.Assembly}, string name = ".cctor") + 0x1b bytes log4net.dll!log4net.LogManager.GetLogger(string name = ".cctor") + 0x1e bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Lib.Tracing.CELogger.CELogger(string name = ".cctor") + 0x20 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Lib.Tracing.TraceManager.LoggerFactoryHelper.makeLogger(string name = ".cctor") + 0x35 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Lib.Tracing.TraceManager.getLogger(string name = ".cctor") + 0x4a bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.AbstractSchedulableObject..cctor() + 0x23 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.SchedulableInfoObject.SchedulableInfoObject() + 0xf bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.InfoObjects.newInfoObject(System.Object plgKey = ) + 0xbb bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.InfoObjects.continueUnpack(BusinessObjects.Enterprise.OcaFramework.Oca.InfoStore.info_wire_ob3[] wireObjs = {Length=0x1}) + 0x40a bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.InfoObjects.startUnpack(BusinessObjects.Enterprise.Security.Internal.ISecuritySession session = {BusinessObjects.Enterprise.Security.Internal.SecuritySession}, BusinessObjects.Enterprise.Infostore.IInfoStore infoStore = {BusinessObjects.Enterprise.Infostore.Internal.InfoStore}, BusinessObjects.Enterprise.OcaFramework.Oca.InfoStore.info_wire_ob3[] wireObjs = {Length=0x1}) + 0x9b bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.InfoStore.queryHelper(string query = "SELECT SI_MACHINE, SI_MACHINECHOICE from CI_INFOOBJECTS WHERE SI_ID=2762", BusinessObjects.Enterprise.Infostore.Internal.InfoObjects objs = {BusinessObjects.Enterprise.Infostore.Internal.InfoObjects}) + 0x149 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Infostore.Internal.InfoStore.Query(string query = "SELECT SI_MACHINE, SI_MACHINECHOICE from CI_INFOOBJECTS WHERE SI_ID=2762") + 0x2f bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Ras21.RASConnection.initServerSpec(BusinessObjects.Enterprise.OcaFramework.ServerSpec serverSpec = {BusinessObjects.Enterprise.OcaFramework.ServerSpec}) + 0x30d bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Ras21.RASConnection.init(BusinessObjects.Enterprise.Ras21.IRASConnectionInitService i_initService = <undefined value>) + 0x422 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Ras21.RASConnection.RASConnection(string i_sServerKind = "dpscacheFullClient", BusinessObjects.Enterprise.Ras21.Messages.GetConnection i_getConnection = {BusinessObjects.Enterprise.Ras21.Messages.GetConnection}, System.IO.Stream i_documentStream = <undefined value>, BusinessObjects.Enterprise.Ras21.IRASConnectionInitService i_initService = <undefined value>, BusinessObjects.Enterprise.Ras21.Serialization.IServerDeserializerFactory i_deserializerFactory = {BusinessObjects.Enterprise.Ras21.RASConnectionFactory.RASConnectionServerSerializationFactory}, BusinessObjects.Enterprise.Ras21.Serialization.IServerSerializerFactory i_serializerFactory = {BusinessObjects.Enterprise.Ras21.RASConnectionFactory.RASConnectionServerSerializationFactory}) + 0x18a bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Ras21.RASConnectionFactory.getRASConnection(string i_sServerKind = "CrystalEnterprise.FullClient", System.Globalization.CultureInfo i_locale = {System.Globalization.CultureInfo}, BusinessObjects.Enterprise.Security.Internal.ISecuritySession i_secSession = {BusinessObjects.Enterprise.Security.Internal.SecuritySession}, BusinessObjects.Enterprise.Ras21.Messages.GetConnection.DocumentId i_documentId = {BusinessObjects.Enterprise.Ras21.Messages.GetConnection.DocumentId}, System.IO.Stream i_documentStream = <undefined value>, BusinessObjects.Enterprise.Ras21.IRASConnectionInitService i_initService = <undefined value>) + 0x156 bytes businessobjects.enterprise.sdk.netmodule!BusinessObjects.Enterprise.Ras21.RASConnectionFactory.getRASConnectionObjectId(string i_sServerKind = "CrystalEnterprise.FullClient", System.Globalization.CultureInfo i_locale = {System.Globalization.CultureInfo}, BusinessObjects.Enterprise.Security.Internal.ISecuritySession i_secSession = {BusinessObjects.Enterprise.Security.Internal.SecuritySession}, int i_nObjectId = 0xaca) + 0x108 bytes businessobjects.reportengine.fc.dll!BusinessObjects.ReportEngine.FC.ras21.XMLviaRAS21Encode.newSession(BusinessObjects.ReportEngine.FC.ras21.RAS21SessionID i_occaSession = {BusinessObjects.ReportEngine.FC.ras21.RAS21SessionID}, string i_sLocale = "en-US", int i_nDocId = 0xaca, string s_iConnID = "1") + 0x107 bytes businessobjects.reportengine.fc.dll!BusinessObjects.ReportEngine.FC.ras21.RAS21ReportEngineComAdapter.InitRAS21Connection(BusinessObjects.ReportEngine.FC.ras21.RAS21SessionID i_occaSession = {BusinessObjects.ReportEngine.FC.ras21.RAS21SessionID}, string i_sLocale = "", bool i_bNewDoc = false, int i_nDocId = 0xaca, string i_sConnID = "1") + 0x1d bytes businessobjects.reportengine.fc.dll!BusinessObjects.ReportEngine.FC.ras21.RAS21ReportEngineComAdapter.openDocument(BusinessObjects.ReportEngine.Internal.Utilities.Storage.IStorageManager storageManager = {BusinessObjects.ReportEngine.Internal.Utilities.Storage.ClusterStorageManager}, string sLocale = "", int docID = 0xaca) + 0xde bytes businessobjects.reportengine.fc.dll!BusinessObjects.ReportEngine.FC.ReportEngineImpl.OpenDocument(int docID = 0xaca) + 0x107 bytes > businessobjectinteroperation.dll!BusinessObjectsInteroperation.BusinessObjectsInterop.GetBinaryReportByName(string NameOfTheReport = "DO_Raport", System.IO.Stream StreamForDataBeWritten = {System.Web.HttpResponseStream}, BusinessObjectsInteroperation.BOConfigs BOCfg = {BusinessObjectsInteroperation.BOConfigs}, BusinessObjects.ReportEngine.OutputFormatType OutputFormat = Pdf, System.Collections.Hashtable PromptValues = {Count=0x3}) Line 80 + 0x22 bytes C#

Strange behaviour of a Simple Servlet.Please explain

I am experiencing a strange behaviour from this servlet.
I have written a servlet that expects some data from the client.
So I startup Tomcat and invoke this servlet thru the brower:
http://localhost:8080/A_SYMBIAN_SERVLET/servlet/Recieve_Http_Data.
The Console displays:
Server Ready to receive Message from Symbian Application...
How come the console is not displaying
In Receive_Http_Data [Client] :
at the same time at the console ? How come it is only displaying the first line?
Shudnt the 'In Receive_Http_Data [Client] be displayed if you invoke this servlet
thru the browser?
Can anyone explain this strange behaviour!!!
Attached is my servlet:
public class Recieve_Http_Data extends HttpServlet {
public void doPost(HttpServletRequest request,
HttpServletResponse response)
throws ServletException, IOException
System.out.println("Server Ready to receive Message from Symbian Application...");
BufferedReader br=null;
/* Data Read by the Servlet*/
String sMess="";
// Receive data.
DataInputStream dis = new DataInputStream(request.getInputStream());
sMess = dis.readUTF();
System.out.println("In Receive_Http_Data [Client] : " + sMess);
Can some one explain this strange behaviouR!!!

Ok,I will write an inputstream as you have mentioned in yr mail.
Now,i will write a servlet with the code you have mentioned.
Now how do I know that the servlet is up and running and ready to
receive data from an application.
OK,This is what is the actual application:
I am supposed to receive some test data from a Mobile device
which has the Symbian O/S.
The application on the mobile device is in C++.
This C++ Application connects to my Servlet and sends in request
parameters.The application specifically specifies the name of my
servlet and the protocol(ie method.Connect(URL,'HTTP1.1!))
I have written this servlet on Tomcat 3.2.4 which will receive
this request and display it on my console and return a response
back to the symbian application.(ie the output stream of the servlet).
So,your code will read the parameters sent in by the Symbian
application.right?
Could you also send in the how the outputstream from the servlet
will be sent to the c++ application.
An urgent reply is much appreiciated.

FIM Load Balancing and SPN's - Strange behaviour

I have a FIM setup in a domain
I have mycorp.com and a domain in the same forest contractor.mycorp.com (fictional setup)
I have 2 servers built in the contractors.mycorp.com domain
Id1
Id2
Id1 has the Service and portal on wss3 in SharePoint farm mode, Sp central admin is on this as well
Id2 has the service and is a load balanced SharePoint farm.
I have NLB setup and working the service name is identity.mycorp.com pointing at the IP of the NLB
I have a CNAME identity pointing at identity.mycorp.com
Identity.mycorp.com is used as the name of the Service and the Portal.
In the ApplicationHost.config I have
<system.webServer>
 <security>
 <authentication>
 <windowsAuthentication enabled="true" useKernelMode="true"
useAppPoolCredentials="true" />
 </authentication>
 </security>
</system.webServer>
I have kernel mode enabled, and I have Windows authentication enabled in the IIS console on id1 and id2.
The app pool credentials are a domain account SPService for SharePoint Service, the app pool is set on both id1 and id2 servers. The root domain account mycorp\SPService us used.
In
c:\inetpub\wwwroot\wss\VirtualDirectories
I have set
<resourceManagementClient
requireKerberos="true"
I have registered the alternate URL mappings for SharePoint as
Identity
Identity.myCorp.com
I have registered SPN's for
Setspn –S FIMService/identity.myCorp.com myCorp\FIMService
Setspn –S FIMService/identity myCorp\FIMService
Setspn –S HTTP/identity.myCorp.com myCorp\SPService
Setspn –S HTTP/identity myCorp\SPService
I have configured delegation for both accounts in ADUC for the identity.mycorp.com
So all is well and I installed everything fine.
Now my problem is that if I go to id1 and browse to http://identity/identitymanagement I get redirected , and authenticated with my admin account to
http://id1/IdentityManagement/default.aspx
On id1 if I go to http://identity.myCorp.com/identitymanagement I get prompted for credentials, when I enter myCorp\FIMAdmin and my password I get redirected to the portal at
http://id1/IdentityManagement/default.aspx
If I try and authenticate to any of the previous URL's from other machines in my domain, including the load balanced box id2 I get "HTTP Error 401. The requested resource requires user authentication."
Even if I try and browse to
http://id1/identitymanagement from another machine I am getting 401. Only on
http://id1 am I getting a result, even if there is a prompt.
I am sure my SPN's are fine, there are no duplicate SPN's , I checked with the -x switch
So my load balanced portal and service are not working as I would have thought , I have looked at
http://blogs.msdn.com/b/webtopics/archive/2009/01/19/service-principal-name-spn-checklist-for-kerberos-authentication-with-iis-7-0.aspx
http://social.technet.microsoft.com/Forums/en-US/484faae8-4df6-4b81-8b2d-9d75d5258e4f/fim-portal-http-error-401-the-requested-resource-requires-user-authentication?forum=ilm2
http://social.technet.microsoft.com/wiki/contents/articles/4473.fim-http-error-401-the-requested-resource-requires-user-authentication.aspx
http://setspn.blogspot.ie/2010/06/kerberos-basic-troubleshooting-tip-3.html
The only thing that I can think of is that the machine is in the contractors.myCorp.com domain which makes the machine
unique from where the SPN's are registered, but if that was the case then browsing to the portal from
http://id1 would certainly fail.
Can anyone see anything wrong with my approach ?
Normally I find SharePoint a pain, but this week it seems to be this.
When I ran the fim service install I specified identity.myCorp.com as the name of the server
Rob

In my Load Balanced setup it helped a lot (on some strange behaviours) when I set up Load Balancer to keep session on one server.
Borys Majewski, Identity Management Solutions Architect (Blog: IDArchitect.NET)

Font has a strange behaviour

Similar Messages

Maybe you are looking for