Font substitution when Embedding fonts

The font embedding controls in FFCore's Optimize component include the ability to upload and select a Font Substitution Configuration File: To recap the documentation:The Font Substitution Configuration File option defines the pdfToolbox configuration file that will be used when embedding fonts.This configuration file controls font substitution behavior in Optimize. Fonts are embedded as subsets. Fonts are not embedded if they have a flag indicating that embedding is not allowed. The Embed missing fonts fixup in pdfToolbox Desktop preflight profiles includes an option to select a Font substitution policy: If you select the Open folder with configuration files you will see the text files that control font substitution. Although pdfToolbox Desktop comes with 3 predefined font substitution policies, additional ones can be created by duplicating an existing policy file and editing it (you will have to restart acrobat to see the changes). The prefix on the filname controls the display order of the font policies within pdfToolbox. I would also ensure there are no spaces in any new filenames. The font substitution policies are plain text files with the following content: DisplayName 1 My Special Name SubstituteAll<tab>Arial<tab>Helvetica<tab>Helvetica Neue<tab>Futura<tab>Helvetica Neue<tab>Microsoft Sans Serif<tab>MS PGothic<tab>Trebuchet MS<tab>Verdana
SubstituteFirst<tab>Arial Bold<tab>Arial-Bold<tab>Helvetica Bold<tab>Futura-Bold<tab>Futura Bold<tab>Helvetica-Bold
The DisplayName defines the name that will appear in the pdfToolbox UI: The remaining lines specify which fonts may be substituted by which fonts and the precedence for substitution.SubstituteAll - all fonts in the list are substituted for each other. When a font is missing pdfToolbox will work down the list until it reaches the name of an available font.SubstituteFirst - only the first font in the list is substituted. pdfToolbox will work down the list until it reaches the name of an available font. Note: the font names must match what pdfToolbox will find. The best way to ascertain that is to run a preflight on the file and copy the names off the report. UPDATE - Updated example text to show location of tabs

I added a new topic to the forum covering font substitution: http://forum.support.xerox.com/t5/FreeFlow-Core/Font-substitution-when-Embedding-fonts/td-p/177411

Similar Messages

[svn:fx-trunk] 13366: Ensuring that AFEFontManager, if it is available, overrides the lookup for embedded fonts for all supported font types, including TTF, when embedding legacy DefineFont3 fonts.

Revision: 13366
Revision: 13366
Author:   [email protected]
Date:     2010-01-07 22:15:50 -0800 (Thu, 07 Jan 2010)
Log Message:
Ensuring that AFEFontManager, if it is available, overrides the lookup for embedded fonts for all supported font types, including TTF, when embedding legacy DefineFont3 fonts. BatikFontManager will remain a backup in the event that AFEFontManager is not found though BatikFontManager;s support is limited to TTF for legacy DefineFont3 fonts.
QE notes: Remember that bitmap comparisons could change slightly
Doc notes: N/A
Bugs: N/A
Reviewer: For Gaurav
Tests run: checkintests, QE had run local tests
Is noteworthy for integration: Yes
Modified Paths:
    flex/sdk/trunk/frameworks/flex-config.xml

I got again a total system freeze today when I wanted to launch firefox using only the openbox menu, without wbar running.
So I decided to try now the 'nouveau.noaccel=1' kernel command line parameter, and to use again wbar for my frequently used applis.
In the Xorg log, the differences are:
without 'nouveau.noaccel=1'
[ 30.761] (II) UnloadModule: "nv"
[ 30.761] (II) Unloading nv
[ 30.761] (--) Depth 24 pixmap format is 32 bpp
[ 30.762] (II) NOUVEAU(0): Opened GPU channel 0
[ 30.765] (II) NOUVEAU(0): [DRI2] Setup complete
[ 30.765] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 30.765] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 30.776] (II) EXA(0): Driver allocated offscreen pixmaps
[ 30.777] (II) EXA(0): Driver registered support for the following operations:
[ 30.777] (II) Solid
[ 30.777] (II) Copy
[ 30.777] (II) Composite (RENDER acceleration)
[ 30.777] (II) UploadToScreen
[ 30.777] (II) DownloadFromScreen
[ 30.777] (==) NOUVEAU(0): Backing store disabled
[ 30.777] (==) NOUVEAU(0): Silken mouse enabled
with 'nouveau.noaccel=1'
[ 1191.621] (II) UnloadModule: "nv"
[ 1191.621] (II) Unloading nv
[ 1191.621] (--) Depth 24 pixmap format is 32 bpp
[ 1191.621] (EE) NOUVEAU(0): Error creating GPU channel: -19
[ 1191.621] (EE) NOUVEAU(0): Error initialising acceleration. Falling back to NoAccel
[ 1191.621] (==) NOUVEAU(0): Backing store disabled
[ 1191.621] (==) NOUVEAU(0): Silken mouse enabled
[ 1191.621] (==) NOUVEAU(0): DPMS enabled
So now 3D acceleration is disabled.
I will see now if the system is stable enough for my daily usage and gives satisfactory performances.
I am almost sure that the mesa nouveau dri driver is the cause of the freezes.
Last edited by berbae (2013-03-27 10:07:42)

Avoid "Embedded Subset" in PDF when embedding fonts

Hi, I am preparing documents according to a requirement for which "When embedding fonts, all characters for the font should be embedded, not just a subset of the fonts being used in the document."
When creating the document with Acrobat 6 (or Acrobat XI) even if 'Adobe PDF Settings' include specifications
- Embed all fonts: checked
- Subset embedded fonts when ...: unchecked
- List of Fonts to never Embed: null
(Compatibility: Acrobat 5.0, version 1.4)
the result is that the produced PDF includes all fonts with the specification '(Embedded Subset)'.
How to configure 'Adobe PDF Settings' from Word so that in all cases the 'full' font is embedded?

Hi,
thank you for your answer! I am still puzzled though.
It sounds strange that an option is included in 'Adobe PDF Settings'
- Subset embedded fonts when ...: unchecked
and this is not executed when the PDF is created.
According to your experience "certain types of fonts can only be embedded as subsets". Is there a list of the fonts that are not embedded as full font?
I have read that "Some fonts have a 'do not embed' flag which is a copyright restriction from the vendor of the font".
Can this be the reason for "subset embedding" instead of "full" font embedding?
Many thanks in advance for any other feedback,
also concerning actual enforcement of the requirement for full font embedding (by the FDA),
Armando

Is there any way to enable editing when embedded in a browser?

When I embed Acrobat Pro in the browser it seems to run in a limited mode that prevents most document editing. It works fine when I access the document directly.
Is there any way I can enable full editing in Acrobat pro when it is browser-embedded?
Here's how it looks normally (excuse my choice of pdf)
When embedded it loses its menus, it loses the Tools link in the top right, and most items in the Comment functions.
It doubtless looses a lot more too.
My preference would be to have a simple (browser-side) call I could make to re-enable all these functions.
Note, I cannot add javascript to the pdfs. I can only act in the browser.
I'm starting to suspect I'll have to write a plugin, but I'd really rather avoid doing that if I can. It's been years since I've had to seriously develop in C++, and one glance at it reminds me the headache it can be.
For reference, browser embedded is key to my architecture, as the document will be being presented with a lot of ancillary information around it, and will need to save to a web-site, not to locally.
(If anyone has any experience with writing a save-back-to-a-website script I'd love to know how that can be done too.)

The plug-in has a limited number of features from the full product that are appropriate for web browsing, that is, viewing, filling in, printing, and submitting data to a scripted web page. Since the vast majority of users cannot save the downloaded file back to the Web server this feature was not included because one is "browsing" not creating nor editing.
Now if one is using a special web server like Microsoft's SahrePoint server it is possible to integrate the full Acrobat product to check out, lock form editing by others, for editing and then saving back to the SharePoint server and remove the lock. The reason for locking the file being edited is to prevent conflicts in the edited versions, sort of like locking Word or Excel files on a network server.
You might want to consider all the issues involved in editing networked files which could be changed by multiple users at any time and the needs of the users to have some control over the changes.
Do not over think this. You are using a "Browser" which only browses.

PDF form submission problem - works in Acrobat and Reader, but not when embedded in browser

Hello everyone,
I am trying to submit a PDF form to an application server.
To do this, I added a "Submit" button to the PDF, configured the server's address and submit format, and tested the button.
I opened the PDF in Acrobat Pro, clicked the button, and my web application received the form in PDF format just as I wanted.
To make it work in Reader, I had to extend user rights via Acrobat Pro, and then the form worked inside Reader as well.
Up to here, everything went fine.
Then I embedded the PDF in a web page (which will be the final scenario) and it all stopped working.
The submit button doesn't do anything anymore, and no data is sent to the application server.
I even tried switching from the form's submit mechanism to calling event.target.submitForm(...) in Javascript directly, but nothing changed (meaning this too worked only when opening the form as an "offline" pdf, but not when embedding it in a web page).
Is there something I am missing? Something else that must be configured/activated in order to be able to submit the PDF when it is in the form of an embedded object?
Many thanks in advance,
Alex

Thanks for your reply, Paul.
I tested the submit button both in Reader 9.3 and Acrobat 8 (which is the same I used to RE the PDF).
Apparently I got it working too, but only by deploying my embedding web page to an application server.
The final environment the PDF will be embedded into will be inside a web application deployed to an application server, so I guess my problem is solved.
It didn't work only when embedded into a local test.html web page saved on my PC...
Thanks again, have a good day.
Alex

Strange behaviour when embedding HTML page in Air

Hi,
I'm trying to embedd a HTML page to a Air application.
The HTML page has a simple Flex application (TestFlex4Project.mxml) with a button that changes one HTML element on the web page (TestFlex4Project.html) using ExternalInterface. If I run the Flex application using the HTML page it works just fine and when I click the button the HTML ellement is changed and the mouseover- and onclick events works. If I embedd the HTML page in an Air application the mouseover- and onclick events does not work any more. Why?
If I use Aternative 1 in the HTML code (instead of using Aternative 2 in the HTML code where I'm editing the innerHTML property) the mouseover- and onclick events works when the HTML page is embeded in Air. Why?
Even more strange is that if I remove the line [<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />] from the HTML page the Flex application dose not show at all when embedded in Air. Why?
You can try the online sample here and the files here.
The application looks like this:
And if you click the button and click the upper most text you will recieve a message like this:
But not when I use innerHTML and embedd the HTML page in Air. Can anyone please help me with this issue. Is it a bug or what am I doing wrong? I need to change some HTML elements using innerHTML.
Thanks!!
The code for TestFlex4Project.mxml is like this
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
width="100%"
height="100%">
<fx:Script>
<![CDATA[
   function buttonClickHandler(event:Event):void{
   ExternalInterface.call(" function(){SetHTML();}")
]]>
</fx:Script>
<s:HGroup verticalAlign="middle">
<s:Button label="Edit HTML Element" click="buttonClickHandler(event)"/>
</s:HGroup>
</s:Application>
The code for TestFlex4Project.html is like this
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8"/>
<title>Test Flex 4 Project</title>
<meta name="description" content="" />
<script src="js/swfobject.js"></script>
<script>
var flashvars = {
var params = {
   menu: "false",
   scale: "noScale",
   allowFullscreen: "true",
   allowScriptAccess: "always",
   bgcolor: "",
   wmode: "direct" // can cause issues with FP settings & webcam
var attributes = {
   id:"TestFlex4Project"
swfobject.embedSWF(
   "TestFlex4Project.swf",
   "altContent", "100%", "100%", "10.0.0",
   "expressInstall.swf",
   flashvars, params, attributes);
   function Message(){
   alert("Message!")
function SetHTML(){
   //Start Alternative 1
   NewHTML.innerHTML = "Dynamically changed text"
   NewHTML.style.cursor = "pointer"
   NewHTML.style.color = "#ff0000"
   NewHTML.onclick = function(){
    Message();
   NewHTML.onmouseover = function(){
    this.style.fontWeight = 700;
   //End Alternative 1
   //Start Alternative 2
   var HTMLStr='<p style="cursor:pointer; fontWeight:300; color:#ff0000" onClick = "Message()" onMouseOver = "this.style.fontWeight=700">Dynamically changed text</p>'
   NewHTML.outerHTML=HTMLStr
   //End Alternative 2
</script>
<style>
html, body { height:100%; overflow:hidden; }
body { margin:0; }
</style>
</head>
<body id="Body">
<p id="NewHTML">This text will change when you click the button!</p>
<p style="cursor:pointer; fontWeight:'300'; color:#ff0000" onClick = "Message()" onmouseover = "this.style.fontWeight='700'">Default text</p>
<div id="altContent">
<p><a href="http://www.adobe.com/go/getflashplayer">
   <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
   </a>
</p>
</div>
</body>
</html>
The code for the Airapplication is like this
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
width="800"
height="566">
<mx:HTML id="HTMLObject" location="TestFlex4Project.html" width="100%" height="100%"/>
</s:WindowedApplication>

Hi,
I'm trying to embedd a HTML page to a Air application.
The HTML page has a simple Flex application (TestFlex4Project.mxml) with a button that changes one HTML element on the web page (TestFlex4Project.html) using ExternalInterface. If I run the Flex application using the HTML page it works just fine and when I click the button the HTML ellement is changed and the mouseover- and onclick events works. If I embedd the HTML page in an Air application the mouseover- and onclick events does not work any more. Why?
If I use Aternative 1 in the HTML code (instead of using Aternative 2 in the HTML code where I'm editing the innerHTML property) the mouseover- and onclick events works when the HTML page is embeded in Air. Why?
Even more strange is that if I remove the line [<img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />] from the HTML page the Flex application dose not show at all when embedded in Air. Why?
You can try the online sample here and the files here.
The application looks like this:
And if you click the button and click the upper most text you will recieve a message like this:
But not when I use innerHTML and embedd the HTML page in Air. Can anyone please help me with this issue. Is it a bug or what am I doing wrong? I need to change some HTML elements using innerHTML.
Thanks!!
The code for TestFlex4Project.mxml is like this
<?xml version="1.0" encoding="utf-8"?>
<s:Application xmlns:fx="http://ns.adobe.com/mxml/2009"
    xmlns:s="library://ns.adobe.com/flex/spark"
width="100%"
height="100%">
<fx:Script>
<![CDATA[
   function buttonClickHandler(event:Event):void{
   ExternalInterface.call(" function(){SetHTML();}")
]]>
</fx:Script>
<s:HGroup verticalAlign="middle">
<s:Button label="Edit HTML Element" click="buttonClickHandler(event)"/>
</s:HGroup>
</s:Application>
The code for TestFlex4Project.html is like this
<!DOCTYPE html>
<html lang="en">
<head>
<meta charset="utf-8"/>
<title>Test Flex 4 Project</title>
<meta name="description" content="" />
<script src="js/swfobject.js"></script>
<script>
var flashvars = {
var params = {
   menu: "false",
   scale: "noScale",
   allowFullscreen: "true",
   allowScriptAccess: "always",
   bgcolor: "",
   wmode: "direct" // can cause issues with FP settings & webcam
var attributes = {
   id:"TestFlex4Project"
swfobject.embedSWF(
   "TestFlex4Project.swf",
   "altContent", "100%", "100%", "10.0.0",
   "expressInstall.swf",
   flashvars, params, attributes);
   function Message(){
   alert("Message!")
function SetHTML(){
   //Start Alternative 1
   NewHTML.innerHTML = "Dynamically changed text"
   NewHTML.style.cursor = "pointer"
   NewHTML.style.color = "#ff0000"
   NewHTML.onclick = function(){
    Message();
   NewHTML.onmouseover = function(){
    this.style.fontWeight = 700;
   //End Alternative 1
   //Start Alternative 2
   var HTMLStr='<p style="cursor:pointer; fontWeight:300; color:#ff0000" onClick = "Message()" onMouseOver = "this.style.fontWeight=700">Dynamically changed text</p>'
   NewHTML.outerHTML=HTMLStr
   //End Alternative 2
</script>
<style>
html, body { height:100%; overflow:hidden; }
body { margin:0; }
</style>
</head>
<body id="Body">
<p id="NewHTML">This text will change when you click the button!</p>
<p style="cursor:pointer; fontWeight:'300'; color:#ff0000" onClick = "Message()" onmouseover = "this.style.fontWeight='700'">Default text</p>
<div id="altContent">
<p><a href="http://www.adobe.com/go/getflashplayer">
   <img src="http://www.adobe.com/images/shared/download_buttons/get_flash_player.gif" alt="Get Adobe Flash player" />
   </a>
</p>
</div>
</body>
</html>
The code for the Airapplication is like this
<?xml version="1.0" encoding="utf-8"?>
<s:WindowedApplication
xmlns:fx="http://ns.adobe.com/mxml/2009"
xmlns:s="library://ns.adobe.com/flex/spark"
    xmlns:mx="library://ns.adobe.com/flex/mx"
width="800"
height="566">
<mx:HTML id="HTMLObject" location="TestFlex4Project.html" width="100%" height="100%"/>
</s:WindowedApplication>

Flash ComboBox only showing 2 rows when embedded in Connect

We've built an AS2 application that can be embedded into various LMSs, etc.
Curiously, when embedded in Adobe Connect, the ComboBoxes aren't rendered correctly. Rather than dropping down, the menus are displaying above the widget, even though there is plenty of room below. Even worse, only the first two rows are displayed, so to select any other rows you have to use the arrow keys.
My guess is that the ComboBox is trying to determine how much room it has to render its menus, and that this is going awry.
_lockRoot is set to true
I think this might be handled by the PopUpManager, perhaps by its setSize function, but I can't figure out where this is defined. It's simply listed as a property:
var setSize:Function;
Any ideas? Thanks!

Hello Chris and Sameer,
thank you for getting back on this issue.
To answer your questions first:
- no, I have not posted this issue in the connect forums - I will do and point to this discussion
- Sameer, I have tested the webcam on the website you pointed out, it is not working with Firefox but it is working in Chrome
I also need to give you an update on the current versions I use:
Win 7 Pro (64bit) (all updates included)
Firefox 21.0
IE 10.0.9200.16576
Chrome 26.0.1410.64 m
Flash Player 11.7.700.202
Adobe Connect Addin 11.2 r261
I tested the webcam via FP with Firefox, IE and Chrome in the versions mentioned above. Only in Chrome I can run the WebCam on the www.testwebcam.com website. Once I start the adobe connect meeting and want to start the webcam the Connect Addin stops working with the popup as shown in post 3 of this discussion in all three browsers.
All components have been uninstalled and installed again (except for IE) for testing with no change in the result. I have also rolled back the computer to the system recovery point furthest back in time to see if any other installation might be the cause. But no luck either.
I am happy to post the logs but would need advise where to find these or how to retrieve.
Thanks!
Konwill

Error popping up when embedded

Hi,
I've got a minor but frustrating problem: When embedding the results in HTML on my website, visitors always get the pop-up which says (in Dutch): "De opdrachten voor dit document zijn niet beschikbaar in het Engels (VS)" which means translated that the assignments for this document are not available in English.
What does this mean and how can I avoided this? "Sluiten", equal to close, should be pressed to close the pop-up and show the results.
Thanks..
Kind regards,
Barry

Hi,
Please provide the link to your HTML page, or you can email to [email protected]
Do you know what locale your visitors are in, where are they viewing your page?
Thanks,
Lucia

"Movie not loaded" when embedded in HTML.

I am new to flash programming and am trying to teach myself actionscript. So far I have been unable to get my program to run when embedded on my website. It works perfectly when I run the swf on my own hard drive, but when embedded it simply shows a white square. Right-clicking brings up a menu with a greyed out "movie not loaded" and "about flash player 10". Do I need to change the compiler settings somehow? Or do I need to change something on my website? So far I've just been compiling it by dragging the .mxml file onto the mxmlc.exe program.
Searching google has revealed a ton of people with similar issues, but no clear solution. Any help would be greatly appreciated.

Problem resolved. Apparently the swf I was using was bad. After replacing it with a backup copy, it works.

IOS Debug error when embedding non-CFF fonts

We have a project where we are embedding fonts for some button skins as per Jason's blog (http://blogs.adobe.com/jasonsj/2011/08/embedding-fonts-in-flex-mobile-projects.html) - our skin uses StyleableTextFields for the label.
When we debug on the iPad we get an error that seems to be occurring when one of the buttons with the embedded font skin is being initialized. (Debugger stops on UIComponent.as line 7485)
This is the output:
TypeError: Error #1009: Cannot access a property or method of a null object reference.
    at _HOYSiPad_mx_managers_SystemManager/callInContext()[_HOYSiPad_mx_managers_SystemManager.a s:37]
    at mx.core::EmbeddedFontRegistry/getAssociatedModuleFactory()[E:\dev\4.5.1\frameworks\projec ts\framework\src\mx\core\EmbeddedFontRegistry.as:469]
    at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::getFontContext()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\core\UIComponent.as:12682]
    at mx.core::UIComponent/createInFontContext()[E:\dev\4.5.1\frameworks\projects\framework\src \mx\core\UIComponent.as:12740]
    at spark.skins.mobile.supportClasses::ButtonSkinBase/createChildren()[E:\dev\4.5.1\framework s\projects\mobiletheme\src\spark\skins\mobile\supportClasses\ButtonSkinBase.as:223]
    at spark.skins.mobile::ButtonSkin/createChildren()[E:\dev\4.5.1\frameworks\projects\mobileth eme\src\spark\skins\mobile\ButtonSkin.as:239]
    at net.hoys.display.skins.buttons::SecondaryButtonSkin_mobile/createChildren()[T:\Homework\S erver\HOYS Frontend Repository\HOYS-iPad\src\net\hoys\display\skins\buttons\SecondaryButtonSkin_mobile.as:100 ]
    at mx.core::UIComponent/initialize()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\core\ UIComponent.as:7624]
    at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\core\UIComponent.as:7485]
    at mx.core::UIComponent/addChild()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\core\UI Component.as:7166]
    at spark.components.supportClasses::SkinnableComponent/attachSkin()[E:\dev\4.5.1\frameworks\ projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:692]
    at spark.components.supportClasses::SkinnableComponent/validateSkinChange()[E:\dev\4.5.1\fra meworks\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:443]
    at spark.components.supportClasses::SkinnableComponent/createChildren()[E:\dev\4.5.1\framewo rks\projects\spark\src\spark\components\supportClasses\SkinnableComponent.as:406]
    at mx.core::UIComponent/initialize()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\core\ UIComponent.as:7624]
    at mx.core::UIComponent/http://www.adobe.com/2006/flex/mx/internal::childAdded()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\core\UIComponent.as:7485]
    at mx.core::UIComponent/addChildAt()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\core\ UIComponent.as:7189]
    at spark.components::Group/addDisplayObjectToDisplayList()[E:\dev\4.5.1\frameworks\projects\ spark\src\spark\components\Group.as:2037]
    at spark.components::Group/http://www.adobe.com/2006/flex/mx/internal::elementAdded()[E:\dev\4.5.1\frameworks\projects\spark\src\spark\components\Group.as:1628]
    at spark.components::Group/setMXMLContent()[E:\dev\4.5.1\frameworks\projects\spark\src\spark \components\Group.as:633]
    at spark.components::Group/set mxmlContent()[E:\dev\4.5.1\frameworks\projects\spark\src\spark\components\Group.as:573]
    at spark.components::SkinnableContainer/set mxmlContent()[E:\dev\4.5.1\frameworks\projects\spark\src\spark\components\SkinnableContai ner.as:657]
    at spark.components::SkinnableContainer/set mxmlContent()
    at spark.components::SkinnableContainer/createDeferredContent()[E:\dev\4.5.1\frameworks\proj ects\spark\src\spark\components\SkinnableContainer.as:1050]
    at spark.components::SkinnableContainer/createContentIfNeeded()[E:\dev\4.5.1\frameworks\proj ects\spark\src\spark\components\SkinnableContainer.as:1078]
    at spark.components::SkinnableContainer/createChildren()[E:\dev\4.5.1\frameworks\projects\sp ark\src\spark\components\SkinnableContainer.as:885]
    at spark.components::Application/createChildren()[E:\dev\4.5.1\frameworks\projects\spark\src \spark\components\Application.as:1480]
    at mx.core::UIComponent/initialize()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\core\ UIComponent.as:7624]
    at spark.components::Application/initialize()[E:\dev\4.5.1\frameworks\projects\spark\src\spa rk\components\Application.as:1334]
    at HOYSiPad/initialize()
    at mx.managers.systemClasses::ChildManager/childAdded()[E:\dev\4.5.1\frameworks\projects\fra mework\src\mx\managers\systemClasses\ChildManager.as:189]
    at mx.managers.systemClasses::ChildManager/initializeTopLevelWindow()[E:\dev\4.5.1\framework s\projects\framework\src\mx\managers\systemClasses\ChildManager.as:359]
    at mx.managers::SystemManager/initializeTopLevelWindow()[E:\dev\4.5.1\frameworks\projects\fr amework\src\mx\managers\SystemManager.as:3063]
    at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::kickOff()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\managers\SystemManager.as:2849]
    at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::preloader_completeHandler()[E:\dev\4.5.1\frameworks\projects\framework\src\mx\managers\SystemManager.as:2729]
    at mx.managers::SystemManager/http://www.adobe.com/2006/flex/mx/internal::preloader_completeHandler()
    at flash.events::EventDispatcher/dispatchEvent()
    at mx.preloaders::Preloader/timerHandler()[E:\dev\4.5.1\frameworks\projects\framework\src\mx \preloaders\Preloader.as:542]
    at mx.preloaders::Preloader/timerHandler()
    at flash.utils::Timer/tick()
    at flash.utils::Timer/tick()
We then reverted the button skins back to one that we use for a web app the debugging runs fine - the web skin uses a embedded font where CFF is set to true.
Is this possibly a bug with the SDK, debugging or something we aren't quite setting correctly?
Any infomation or direction would be greatly appreciated.
- Liz

Well, I've now tried with the beta version AIR 3.9.0.880 in the new IOS 7, and this problem is still happening, unfortunately.
My app compiled with -ipa-test-interpreter installs fine but with -ipa-debug-interpreter it doesn't install at all.
The IPA is generated successfully but iTunes refuses to install it.
I've filed a bug here. If you're experiencing the same problem, please leave a vote here:
https://bugbase.adobe.com/index.cfm?event=bug&id=3635356

Character missing when embedding font

I have a movie in wich text is loaded dynamically. I load the
fonts from an use a swf in wich the font is embedded and import
that into the main movie. The text is loaded based on language
choice.
But now i come to the hungary this one character: "ő"
doesn't show up.
So i recreated the font swf to include this character but it
still doesn't work. This character is still missing. It's driving
me crazy...
I found out that it might have to do with the loaded language
and settings from the OS. But i am not shure what to do exactly.
Can anyone help me out please...
YOur help is very much appreciated

Sorry respondplease , thanks for you response but that was
not my problem.
I already had the font embedded and linked. It was just that
i couldn't get this one character into the flash movie.
Finally i succeeded by installing support for certain
languages, and then setting the language of my machine to this
language and reboot(!)
Then after the reboot launch flash and publish the font movie
again. That did the trick. I have the font loaded in a sepperate
fontfile/movie (swfmovie).
It has to do with the system only loading the first 250
characters or so from a font The character i needed was out of this
range

Issues when embedding several subtitles languages in one file - bug?

Dear people
I have added subtitles to a couple of shorts ripped from DVDs and embedded the .srt (sometimes one, sometimes several) using Subler into the m4v.
The results are:
* I can select all the subtitles in iTunes on my Mac, as expected
* on the iPad I can't select subtitles at all (if there are more than one), and I just can see the last selected language I've used in iTunes
Is this a known bug? or a feature? or there is anything I can do?
Luis

Post Author: nan
CA Forum: Exporting
Hi synapsevampire, thanks for replying. synapsevampire:- Even though i've used Tahoma size 11 fonts, when i open the document in MSWord 2000, they have a size of 10.5.
Same here, I changed it to a Tahoma 11.5 and it results in size 11... Well, i guess it's a bug then. I hope something will be done about it before i have to change all of my reports... synapsevampire: So i guess it's a bug then. I hope it gets corrected before i have to change all reports...
- In the exported file, the "line spacing" setting i have set to "exact 16" is ignored and set to the default "single spacing". This happened in CR 8.5 too.
No surprise there, as those are settings within Crystal, not Word. Very few programatic features are exported to any other format, it just emulates them. I wonder why is that. It shouldn't be that difficult to pass these settings to word. Anyway... synapsevampire:
- Moving textboxes around from one page to another and then saving and reoppening, sometimes causes MSWord to delete all text from the document. I cannot be sure if this is an issue of MSWord or CR XI but i'm reporting it just in case...
Ummm, moving textboxes while in Word you mean? That would be a Word issue. I thought of that too, that's why i tried out the Editable RTF format which was a major dissapointment with the way it handles (or rather does not handle) paragraphs. I really hope something can be done about it because it's a very convenient format, for me at least.

Error-Receiver File Adapter using Variable substitution when file is empty

XI Experts,
We are on PI 7.0, SP14.
We are using variable subtitution to get the filename from source message. This works fine as long as we have data in the payload for filename element. But we have a scenario where we don't have to create file when certain condition does not exists in source message so in the message payload filename element will not exists in such condition and file will be empty and we should not create file.
Parameter in the communication channel for Handling empty message is "Ignore".
Does anyone knows how to handle this scneario. We don't want to default any file name in the message mapping if source file name element does not exists.
We are following getting error in the Adapter engine.
MP: Exception caught with cause com.sap.aii.af.ra.ms.api.RecoverableException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file: com.sap.aii.adapter.file.configuration.DynamicConfigurationException: Error during variable substitution: com.sap.aii.adapter.file.varsubst.VariableDataSourceException: The following variable was not found in the message payload: file
Thanks
MP

You can implement this by writing the module to throw an exception or whatever method you want to execute.
If you don't want to receive an error message then module is suitable for you.
Gaurav Jain

Jbutton in applet not appearing when embedded in webpage(jre1.6.0_02)

Hi,
I am accessing a webcam from an applet embedded in a webpage using JMF 2.1. I am using JButtons using Image Icons. When i view the applet using applet viewer both the player and buttons appear fine. However when the applet is embedded in a jsp page the image JButtons don't appear at all. I am using jre1.6.0_02.
Following is the code( The capture and cancel JButtons dont appear when viewed in webpage):
import java.awt.*;
import java.io.*;
//import java.awt.Graphics;
import java.awt.event.ActionEvent;
import java.awt.event.ActionListener;
import java.awt.image.*;
import java.net.URL;
import java.net.URLConnection;
import javax.media.format.*;
import javax.media.control.*;
import javax.media.util.*;
import javax.media.*;
import javax.swing.ImageIcon;
import javax.swing.JApplet;
import javax.swing.JButton;
import javax.swing.JComponent;
import javax.swing.JDialog;
import javax.swing.JFrame;
import javax.swing.JOptionPane;
import javax.swing.JPanel;
import com.sun.image.codec.jpeg.JPEGCodec;
import com.sun.image.codec.jpeg.JPEGEncodeParam;
import com.sun.image.codec.jpeg.JPEGImageEncoder;
public class WebCamUnit extends JApplet implements ActionListener
     static final long serialVersionUID = -116069779446114664L;
     private static final String FILENAME_HEADER = "fileName";
     private static final String FILELASTMOD_HEADER = "fileLastMod";
     public static Player player = null;
     public CaptureDeviceInfo captureDeviceInfo = null;
     public MediaLocator ml = null;
     public JButton captureButton, cancelButton = null;
     public Buffer buf = null;
     public Image img = null;
     public VideoFormat vf = null;
     public BufferToImage btoi = null;
     public Component comp;
     public static boolean isTrue = true;
     public JPanel buttonPanel, playerPanel;
     public static String localDirectoryName = null;
     public static String serverDirectoryName = null;
     public static String servletURL = null;
     public static String localImageName = null;
     public static String serverImageName = null;
     String webCamDriverName = null;
     String middleButtonFilename = "TakePicture.JPG";
     String frontButtonFilename = "Cancel.JPG";
     public void init()
          localImageName = getParameter("LOCAL_IMAGE_NAME");
          serverImageName = getParameter("SERVER_IMAGE_NAME");
          localDirectoryName = getParameter("LOCAL_DIRECTORY_NAME");
          serverDirectoryName = getParameter("SERVER_DIRECTORY_NAME");
          servletURL = getParameter("SERVLET_URL");
          webCamDriverName = getParameter("WEBCAM_DRIVER_NAME");
          setLayout(new BorderLayout());
          setSize(320, 340);
          ImageIcon middleButtonIcon = new ImageIcon(middleButtonFilename);
          ImageIcon frontButtonIcon = new ImageIcon(frontButtonFilename);
          captureButton = new JButton(middleButtonIcon);
          cancelButton = new JButton(frontButtonIcon);
          captureButton.setBackground(Color.WHITE);
          captureButton.setContentAreaFilled(false);
          captureButton.setBorderPainted(false);
          captureButton.setFocusPainted(false);
          captureButton.addActionListener(this);
          captureButton.setEnabled(true);
          cancelButton.setBackground(Color.WHITE);
          cancelButton.setContentAreaFilled(false);
          cancelButton.setBorderPainted(false);
          cancelButton.setFocusPainted(false);
          cancelButton.addActionListener(this);
          cancelButton.setEnabled(true);
          buttonPanel = new JPanel();
          buttonPanel.add(captureButton);
          buttonPanel.add(cancelButton);
          buttonPanel.setBackground(Color.WHITE);
          getContentPane().add(buttonPanel, BorderLayout.CENTER);
          if(null==webCamDriverName)
               webCamDriverName = "vfw:Microsoft WDM Image Capture (Win32):2";
          captureDeviceInfo = CaptureDeviceManager.getDevice(webCamDriverName);
          ml = captureDeviceInfo.getLocator();
               try
                    player = Manager.createRealizedPlayer(ml);
               catch (Exception e)
               try
                    player.start();
               catch (Exception e)
     public void destroy()
          player.close();
     public void start()
          try
               if ((comp = player.getVisualComponent()) != null)
                    playerPanel = new JPanel();
                    comp.setBounds(0, 0, 320, 240);
                    playerPanel.add(comp);
                    getContentPane().add(playerPanel, BorderLayout.NORTH);
               player.start();
          catch (Exception e)
          setVisible(true);
          invalidate();
          repaint();
     public boolean action(Event e, Object o)
          return true;
     public void paint(Graphics g)
          super.paint(g);
     public static void playerclose()
          player.close();
          player.deallocate();
     public void actionPerformed(ActionEvent e)
          JComponent c = (JComponent) e.getSource();
          if (c == captureButton)
               player.stop();
               FrameGrabbingControl fgc = (FrameGrabbingControl) player
                         .getControl("javax.media.control.FrameGrabbingControl");
               buf = fgc.grabFrame();
               btoi = new BufferToImage((VideoFormat) buf.getFormat());
               img = btoi.createImage(buf);
               String newDir = localDirectoryName;
               boolean success = (new File(newDir)).mkdirs();
               String imageServername = localDirectoryName + localImageName;
               saveJPG(img, imageServername);
               isTrue = false;
          else
               if ((comp = player.getVisualComponent()) != null)
                    getContentPane().add(comp, BorderLayout.NORTH);
                    player.start();
               isTrue = true;
     public void stop()
          player.stop();
          player.deallocate();
          getContentPane().removeAll();
     public static void saveJPG(Image img, String s)
          img = img.getScaledInstance(160, 120, 1);
          BufferedImage bi = new BufferedImage(img.getWidth(null), img
                    .getHeight(null), BufferedImage.TYPE_INT_RGB);
          Graphics2D g2 = bi.createGraphics();
          g2.drawImage(img, 0, 0, null, null);
          FileOutputStream out = null;
          try
               out = new FileOutputStream(s);
          catch (java.io.FileNotFoundException io)
               String message = "File Not Found";
               JOptionPane pane = new JOptionPane(message);
               JDialog dialog = pane.createDialog(new JFrame(), "Dilaog");
               dialog.show();
          JPEGImageEncoder encoder = JPEGCodec.createJPEGEncoder(out);
          JPEGEncodeParam param = encoder.getDefaultJPEGEncodeParam(bi);
          param.setQuality(0.50f, false);
          encoder.setJPEGEncodeParam(param);
          try
               encoder.encode(bi);
               out.close();
               try
               transferFile(localDirectoryName+localImageName,serverImageName,"",-1);
               catch (Exception e1)
                    String message = "Error occurred while transferring image to server!!";
                    JOptionPane pane = new JOptionPane(message);
                    JDialog dialog = pane.createDialog(new JFrame(), "Dilaog");
                    dialog.show();
               String message = "Image saved successfully!!";
               JOptionPane pane = new JOptionPane(message);
               JDialog dialog = pane.createDialog(new JFrame(), "Dilaog");
               dialog.show();
          catch (java.io.IOException io)
               String message = "Error occurred while saving image!!";
               JOptionPane pane = new JOptionPane(message);
               JDialog dialog = pane.createDialog(new JFrame(), "Dilaog");
               dialog.show();
          catch (Exception e)
        // this method transfers the prescribed file to the server.
        // if the destination directory is "", it transfers the file to      "d:\\".
        //11-21-02 Changes : This method now has a new parameter that references the item
        //that is being transferred in the import list.
        public static String transferFile(String srcFileName, String
     destFileName,
                                          String destDir, int itemID)
           if (destDir.equals(""))
              destDir = serverDirectoryName;
           // get the fully qualified filename and the mere filename.
           String fqfn = srcFileName;
           String fname = fqfn.substring(fqfn.lastIndexOf(File.separator)+1);
           try
              //importTable importer = jbInit.getImportTable();
              // create the file to be uploaded and a connection to      servlet.
              File fileToUpload = new File(fqfn);
              long fileSize = fileToUpload.length();
              // get last mod of this file.
              // The last mod is sent to the servlet as a header.
              long lastMod = fileToUpload.lastModified();
              String strLastMod = String.valueOf(lastMod);
              URL serverURL = new URL(servletURL);
              URLConnection serverCon = serverURL.openConnection();
              // a bunch of connection setup related things.
              serverCon.setDoInput(true);
              serverCon.setDoOutput(true);
              // Don't use a cached version of URL connection.
              serverCon.setUseCaches (false);
              serverCon.setDefaultUseCaches (false);
              // set headers and their values.
              serverCon.setRequestProperty("Content-Type",
                                           "application/octet-stream");
              serverCon.setRequestProperty("Content-Length",
              Long.toString(fileToUpload.length()));
              serverCon.setRequestProperty(FILENAME_HEADER, destDir + destFileName);
              serverCon.setRequestProperty(FILELASTMOD_HEADER, strLastMod);
             // if (webadminApplet.DEBUG) System.out.println("Connection with FTP server established");
              // create file stream and write stream to write file data.
              FileInputStream fis = new FileInputStream(fileToUpload);
              OutputStream os = serverCon.getOutputStream();
              try
                 // transfer the file in 4K chunks.
                 byte[] buffer = new byte[4096];
                 long byteCnt = 0;
                 //long percent = 0;
                 int newPercent = 0;
                 int oldPercent = 0;
                 while (true)
                    int bytes = fis.read(buffer);
                    byteCnt += bytes;
                    //11-21-02 :
                    //If itemID is greater than -1 this is an import file      transfer
                    //otherwise this is a header graphic file transfer.
                    if (bytes < 0) break;
                    os.write(buffer, 0, bytes);
                 os.flush();
                 //if (webadminApplet.DEBUG) System.out.println("No of bytes sent: " + byteCnt);
              finally
                 // close related streams.
                 os.close();
                 fis.close();
             // if (webadminApplet.DEBUG) System.out.println("File Transmission complete");
              // find out what the servlet has got to say in response.
              BufferedReader reader = new BufferedReader(
                             new
     InputStreamReader(serverCon.getInputStream()));
              try
                 String line;
                 while ((line = reader.readLine()) != null)
                   // if (webadminApplet.DEBUG) System.out.println(line);
              finally
                 // close the reader stream from servlet.
                 reader.close();
           } // end of the big try block.
           catch (Exception e)
              System.out.println("Exception during file transfer:\n" + e);
              e.printStackTrace();
              return("FTP failed. See Java Console for Errors.");
           } // end of catch block.
           return("File: " + fname + " successfully transferred.");
        } // end of method transferFile().
}

>
I am accessing a webcam from an applet embedded in a webpage using JMF 2.1. I am using JButtons using Image Icons. When i view the applet using applet viewer both the player and buttons appear fine. However when the applet is embedded in a jsp page the image JButtons don't appear at all. >That is probably because of security. Add 10 Dukes to the thread to indicate you are serious about resolving this, and I might expand on that answer.

Trouble when embedding a Bean in an Office Document

Hello all,
I have to embed a Java Bean into an ActiveX Container like a MS Office document via the axbridge.
Let me mention, what I have (successfully) done so far:
- Create a Java Bean
- Create a Jar file (incl. the manifest file)
- Run the packager and register the Object
- Test the control in the MS ActiveX Control Test Container
System: Win2k, JSDK 1.4.2, JRE 1.4.2_03, Office 2000, Visual C++ 6.0 SP 3
The ActiveX control works fine in the MS test container. When I try to embed it in another Container like a MS Office document or Macromedia Authoware, the Container Program hangs up without an error message. Also the Java Console contains no message.
On the other side, the Control can successfully be created and used within VBA:
Sub myTestApplet()
    Set myTest = CreateObject("TestApplet.Bean.1")
    �
    Set myTest = Nothing
End Sub Doing so, the control works correctly, but isn�t displayed in the document.
I tried to use different Superclasses for the Bean like Component, JComponent, Panel etc. and at last I used an empty Bean inherited from JComponent. Every try works well in the MS test container, but as soon as I try to embed it into an Office-Document the Application hangs up.
The ActiveX Bridge from the 1.4.2 SDK/JRE Bundle doesn�t work at all, even not in the MS test container. Thus I installed the 1.4.2_03 JRE, which makes the controls work in the MS test container (but still not in other Containers).
Can somebody help me? I have no idea for a workaround and I�m blocked now. Any advice is very welcome!
Regards,
Oliver

Thank you very much for your interest at my problem.
I try to describe exactly, what I do: I want to integrate a Java3D program into a Macromedia Authorware application. Therefore I want to convert the Java3D program into an ActiveX control (and use the ActiveX Bridge). Authorware must be able to access methods of the J3D program and the J3D program must be able to throw events to Authorware. I think this is nothing special for an ActiveX control.
In order to avoid additional problems, I use a simple test application without Java3D (source code enclosed).
I work on:
WindowsXP,
JSDK 1.4.2, JRE 1.4.2_3,
Visual C++ 6.0 SP3 and I also tried Visual Studio .NET.
Authorware 7
MS Office 2000
What have I done so far?
- compiled the code and created a jar archive (manifest file enclosed)
- packaged and registered the Bean as described in http://java.sun.com/j2se/1.4.2/docs/guide/beans/axbridge/developerguide/index.html
- successfully tested the ActiveX control in the ActiveX Control Test Container. The exported methods appear (and work) correctly when I choose "invoke methods".
Now to the problem(s): If I try to embed the control in Authorware or an office document via the ToolBox, the container program hangs up. But as already mentioned above, Visual Basic .NET embeds the control successfully. Therefore I try to create an ActiveX control in VB .NET, which integrates my Java Bean. Let's say a wrapper control. Here are the steps:
- I opened Visual Studio .NET and created a new VB project based on template "Windows Application".
- added the Bean to the ToolBox
- added the Bean into the VB Form.
- added a button into the form. The form designer created the Bean and button as:Friend WithEvents AxActiveXTest1 As AxActiveXTest.AxActiveXTest
Friend WithEvents Button1 As System.Windows.Forms.Button
Me.AxActiveXTest1 = New AxActiveXTest.AxActiveXTest()
Me.Button1 = New System.Windows.Forms.Button() - in the form designer double clicked the button and entered the following code: Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
    Me.AxActiveXTest1.appendText("Hello World")
End Sub- test the form and click on the VB button.
Now the error message listed above appears ("cannot invoke method 'appendText' at this time"). I have no idea, why VB crashes when I try to access a method of the Bean. Somewhere I must have made an error. Each assistance is very welcome.
Thank you in advance and please excuse my less good English.
Oliver
Source code:
1. Class ActiveXTest package de.acns.test;
import javax.swing.*;
import java.awt.event.*;
import java.awt.*;
import java.beans.*;
import java.io.*;
* class ActiveXTest
public class ActiveXTest extends JPanel implements Serializable,
                                                   PropertyChangeListener
    // member variables
    private PropertyChangeSupport propertySupport;
    /** Creates new form ActiveXTest */
    public ActiveXTest() {
        propertySupport = new PropertyChangeSupport( this );
        initComponents();
    /** This method is called from within the constructor to
     * initialize the form.
     * WARNING: Do NOT modify this code. The content of this method is
     * always regenerated by the Form Editor.
    private void initComponents() {
        java.awt.GridBagConstraints gridBagConstraints;
        jButton1 = new javax.swing.JButton();
        jScrollPane1 = new javax.swing.JScrollPane();
        jTextArea1 = new javax.swing.JTextArea();
        setLayout(new java.awt.GridBagLayout());
        jButton1.setText("Click Here!");
        jButton1.addActionListener(new java.awt.event.ActionListener() {
            public void actionPerformed(java.awt.event.ActionEvent evt) {
                jButton1ActionPerformed(evt);
        gridBagConstraints = new java.awt.GridBagConstraints();
        gridBagConstraints.gridx = 0;
        gridBagConstraints.gridy = 0;
        gridBagConstraints.insets = new java.awt.Insets(4, 4, 4, 4);
        add(jButton1, gridBagConstraints);
        jScrollPane1.setMinimumSize(new java.awt.Dimension(160, 100));
        jScrollPane1.setPreferredSize(new java.awt.Dimension(160, 100));
        jTextArea1.setPreferredSize(new java.awt.Dimension(50, 50));
        jScrollPane1.setViewportView(jTextArea1);
        gridBagConstraints = new java.awt.GridBagConstraints();
        gridBagConstraints.gridx = 0;
        gridBagConstraints.gridy = 1;
        gridBagConstraints.insets = new java.awt.Insets(4, 4, 4, 4);
        add(jScrollPane1, gridBagConstraints);
    private void jButton1ActionPerformed(java.awt.event.ActionEvent evt) {
        // Add your handling code here:
        appendText("You clicked the java button.\n");
     * Public methods to export
    public void appendText( String text)
        jTextArea1.append(text);
    public void setText( String text )
        String oldValue = jTextArea1.getText();
        jTextArea1.setText( text );
        propertySupport.firePropertyChange("TEXT", oldValue,
                                           jTextArea1.getText());
    public String getText()
        return jTextArea1.getText();
     * PropertyChangeListener Support
    public void addPropertyChangeListener(PropertyChangeListener listener) {
        propertySupport.addPropertyChangeListener(listener);
    public void removePropertyChangeListener(PropertyChangeListener listener) {
        propertySupport.removePropertyChangeListener(listener);
     * static main method, enables the bean to be testet "standalone"
    public static void main( String[] args)
        // Create a new instance and add it to a JFrame
        ActiveXTest activeXTest = new ActiveXTest();
        JFrame      frame       = new JFrame("Testapplication");
        activeXTest.addPropertyChangeListener(activeXTest);
        frame.setDefaultCloseOperation(frame.HIDE_ON_CLOSE);
        frame.addWindowListener(new WindowAdapter()
            public void windowClosing( WindowEvent e )
                System.exit(0);
        frame.getContentPane().setLayout( new GridLayout ());
        frame.getContentPane().add( activeXTest );
        frame.validate();
        frame.pack();
        frame.setLocation( (Toolkit.getDefaultToolkit().getScreenSize().width
                             - frame.getWidth()) >> 1,
                           (Toolkit.getDefaultToolkit().getScreenSize().height
                             - frame.getHeight()) >> 1 );
        frame.show();
     * For testing purposes only, when the bean is
     * created by the static main method
    public void propertyChange(PropertyChangeEvent evt)
        System.out.println("Property \"" + evt.getPropertyName()
                            + "\" wurde von \"" + evt.getOldValue()
                            + "\" in \"" + evt.getNewValue()
                            + "\" ge?ndert");
    // Variables declaration - do not modify
    private javax.swing.JButton jButton1;
    private javax.swing.JScrollPane jScrollPane1;
    private javax.swing.JTextArea jTextArea1;
    // End of variables declaration
} 2. ActiveXTestBeanInfopackage de.acns.test;
import java.beans.*;
* class ActiveXTestBeanInfo
public class ActiveXTestBeanInfo extends SimpleBeanInfo {
    // Bean descriptor information will be obtained from introspection.
    private static BeanDescriptor beanDescriptor = null;
    private static BeanDescriptor getBdescriptor(){
        // Here you can add code for customizing the BeanDescriptor.
        return beanDescriptor;     }
    // Properties information will be obtained from introspection.
    private static PropertyDescriptor[] properties = null;
    private static PropertyDescriptor[] getPdescriptor(){
        // Here you can add code for customizing the properties array.
        System.out.println("ActiveXTestBeanInfo: Properties werden exportiert:");
        try
            // create the property descritpors
            properties = new PropertyDescriptor[]
                new PropertyDescriptor( "text", de.acns.test.ActiveXTest.class )
            // For debugging purposes only
            for( int i=0; i<properties.length; i++)
                System.out.println(properties.getShortDescription() );
System.out.println(" ");
catch( Exception e )
e.printStackTrace();
return properties; }
// Event set information will be obtained from introspection.
private static EventSetDescriptor[] eventSets = null;
private static EventSetDescriptor[] getEdescriptor(){
// Here you can add code for customizing the event sets array.
return eventSets; }
// Method information will be obtained from introspection.
private static MethodDescriptor[] methods = null;
private static MethodDescriptor[] getMdescriptor(){
// Here you can add code for customizing the methods array.
System.out.println("ActiveXTestBeanInfo: exportiere Methoden:");
try
// create the method descriptors
methods = new MethodDescriptor[]
new MethodDescriptor( ActiveXTest.class.getMethod("appendText", new Class[]{String.class}))
// For debugging purposes only
for( int i=0; i<methods.length; i++)
System.out.println(methods[i].getName());
System.out.println(" ");
catch( Exception e)
e.printStackTrace();
return methods; }
private static int defaultPropertyIndex = -1;
private static int defaultEventIndex = -1;
// Here you can add code for customizing the Superclass BeanInfo.
* Gets the bean's <code>BeanDescriptor</code>s.
* @return BeanDescriptor describing the editable
* properties of this bean. May return null if the
* information should be obtained by automatic analysis.
public BeanDescriptor getBeanDescriptor() {
return getBdescriptor();
* Gets the bean's <code>PropertyDescriptor</code>s.
* @return An array of PropertyDescriptors describing the editable
* properties supported by this bean. May return null if the
* information should be obtained by automatic analysis.
* <p>
* If a property is indexed, then its entry in the result array will
* belong to the IndexedPropertyDescriptor subclass of PropertyDescriptor.
* A client of getPropertyDescriptors can use "instanceof" to check
* if a given PropertyDescriptor is an IndexedPropertyDescriptor.
public PropertyDescriptor[] getPropertyDescriptors() {
return getPdescriptor();
* Gets the bean's <code>EventSetDescriptor</code>s.
* @return An array of EventSetDescriptors describing the kinds of
* events fired by this bean. May return null if the information
* should be obtained by automatic analysis.
public EventSetDescriptor[] getEventSetDescriptors() {
return getEdescriptor();
* Gets the bean's <code>MethodDescriptor</code>s.
* @return An array of MethodDescriptors describing the methods
* implemented by this bean. May return null if the information
* should be obtained by automatic analysis.
public MethodDescriptor[] getMethodDescriptors() {
return getMdescriptor();
* A bean may have a "default" property that is the property that will
* mostly commonly be initially chosen for update by human's who are
* customizing the bean.
* @return Index of default property in the PropertyDescriptor array
*           returned by getPropertyDescriptors.
* <P>     Returns -1 if there is no default property.
public int getDefaultPropertyIndex() {
return defaultPropertyIndex;
* A bean may have a "default" event that is the event that will
* mostly commonly be used by human's when using the bean.
* @return Index of default event in the EventSetDescriptor array
*          returned by getEventSetDescriptors.
* <P>     Returns -1 if there is no default event.
public int getDefaultEventIndex() {
return defaultEventIndex;
3. manifest file manifest.mf
Manifest-Version: 1.0
Name: de/acns/test/ActiveXTest.class
Java-Bean: True

Font substitution when Embedding fonts

Similar Messages

Maybe you are looking for