Flash ComboBox only showing 2 rows when embedded in Connect

We've built an AS2 application that can be embedded into various LMSs, etc.
Curiously, when embedded in Adobe Connect, the ComboBoxes aren't rendered correctly. Rather than dropping down, the menus are displaying above the widget, even though there is plenty of room below. Even worse, only the first two rows are displayed, so to select any other rows you have to use the arrow keys.
My guess is that the ComboBox is trying to determine how much room it has to render its menus, and that this is going awry.
_lockRoot is set to true
I think this might be handled by the PopUpManager, perhaps by its setSize function, but I can't figure out where this is defined. It's simply listed as a property:
var setSize:Function;
Any ideas? Thanks!

Hello Chris and Sameer,
thank you for getting back on this issue.
To answer your questions first:
- no, I have not posted this issue in the connect forums - I will do and point to this discussion
- Sameer, I have tested the webcam on the website you pointed out, it is not working with Firefox but it is working in Chrome
I also need to give you an update on the current versions I use:
Win 7 Pro (64bit) (all updates included)
Firefox 21.0
IE 10.0.9200.16576
Chrome 26.0.1410.64 m
Flash Player 11.7.700.202
Adobe Connect Addin 11.2 r261
I tested the webcam via FP with Firefox, IE and Chrome in the versions mentioned above. Only in Chrome I can run the WebCam on the www.testwebcam.com website. Once I start the adobe connect meeting and want to start the webcam the Connect Addin stops working with the popup as shown in post 3 of this discussion in all three browsers.
All components have been uninstalled and installed again (except for IE) for testing with no change in the result. I have also rolled back the computer to the system recovery point furthest back in time to see if any other installation might be the cause. But no luck either.
I am happy to post the logs but would need advise where to find these or how to retrieve.
Thanks!
Konwill

Similar Messages

AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007)

AppleTV 3 only showing Apple logo when connected to very new Panasonic plasma - worked Ok with older Panasonic (2007) - have reset AppleTV, tried 3 HDMI cables.

Tried again as you suggested - no luck. Ref sequence below
A. Pressed menu & down to reset Apple TV
B after reset & restart pressed menu & up buttons to change resolution. After pressing both buttons for 6 sec, LED starts flashing - released both buttons. TV screen blank. After 20 to 30 sec horizontal lines came on screen remained for 20 sec then screen again went blank. Waited for couple minutes. LED still flashing - pressed Menu button for 2/3 sec - flashing stopped & LED glows continuously. Screen blank
C. Reset the unit again by pressing menu & down. When it restarted - while LED was still flashing, got orange color screen with Apple logo in the middle. This screen remained till LED stopped flashing & then screen went blank

My numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

my numbers tables will not open correctly on screen, the preview shows but when I open the table it only shows blank. When I print a copy it prints ok any solutions?

Rebooted computer works now ok

Reports region only shows 15 rows

I have a strange problem with a reports region. The region runs a simple SQL select against a table. My table has 18 rows but the report region only displays 15 rows.
I ran the SQL directly against the database and all 18 rows are returned, so it's not a problem with the query.
Under the Report Atrributes tab for the region, I checked the Layout and Pagination section. Number of rows was set to 15, which I thought explained my problem.
I deleted the value in number of rows. But the region still only shows 15 rows.
If I change the value in number of rows to 20, all 18 rows are shown. But again, if I delete the 20, only 15 are shown.
Is there some other setting somewhere which is defaulting the report to 15 rows?

That item is cleared as well. Very strange. Still can't see anything on the page that's causing it to only show 15 rows.
Edit -
Setting it to 999999 seems to cure the problem until I find a solution. Very strange, maybe it's a bug?
Message was edited by:
Antilles

Apex report only show 2000 rows

Hi Experts,
I am going to show about 4800 rows in a report and want to show them within a page. In Layout an Pagination, I set 6000 to both 'number of rows' and 'maximum row count' and set 'pagination scheme' to 'not pagination selected'. However, it still only show 2000 row in the page. Is there anything I missed?
Thanks,
Daniel

Daniel Wu wrote:
In Layout an Pagination, I set 6000 to both 'number of rows' and 'maximum row count' and set 'pagination scheme' to 'not pagination selected'. However, it still only show 2000 row in the page. Is there anything I missed?If 2000 was the previous setting then this is likely to be the common problem of pagination settings being cached for a session. Either log out, restart the brower, and log in again, or manually re-request the page from the browser address bar, adding 'RP' in the ClearCache position in the URL.
I am going to show about 4800 rows in a report and want to show them within a page. Are you really sure about this? That's a lot of data to throw at someone in one go, and will have adverse effects on performance, usability and accessibility.

Phone got wet,now it's only showing the apple icon and sometimes connect to itunes

3gs phone got wet,now it's only showing the apple icon alternating with connect to itunes

You didn't connect it to your computer or to power, did you?
Wipe it down, put it in a baggie with raw rice or new silica gel packets and set it in a cool, dry area, like a cupboard. Leave it there for 3 - 4 days.
Take it out after this time, wipe it off, use a soft brush to wipe any rice dust from the dock connector, and connect it to your wall charger. Let it charge for at least 30 minutes and then Reset it while it is connected to power. May take several tries. If it revives fully charge it.
If this does not work you can do an out-of-warranty replacement with Apple for $199 USD.

Edit Appraisals: Notes only shows one row at a time

Under the Employee Review tab of MSS-->Edit Appraisals, when I click to create an appraisal, the appraisal form in our system has areas to add notes. However, in the portal, the area to add notes is only 1 row. It is scrollable, but you can only see one row of text at a time. How can I expand the notes area/editor to show multiple lines of text?

Turns out the configuration is on the R/3 side when setting up the Appraisal. There is an option for number of lines for notes.

DataGrid always only showing 1 record when there should be 5

When I do the "Test Operation" in the Data/Services pane, I can pull back the expected 5 records, however at run time, a grid that pulls data using the exact same operation and same input value, it only shows the first record. Is there a setting that is preventing the grid from showing all records, or, is there a runtime setting that is limiting the number of records pulled back?

Are you getting the data from a database or is it internal xml?

Browser Only Shows 35 Rows per Page

I have a Business Exploder query that I display on the web. However, it only shows 35 pages at a time. Can I increase this to all rows? I don't see an option in the query properties, and I don't have access to any stylesheets.
Thanks.

For table web item, set the specific property - "Number of Data Rows displayed" to 0 (zero) This will show all of the records returned.
But be careful about large number of rows as browser will go for a spin. It does not stops as excel does for 6000 rows.

Adobe Flash Player only shows black box on most websites.

Adobe Flash Player 11.4.402.287 is only showing a black box but not loading or showing any buttons on some/most websites. I am running Mac OS X 10.7.5 and the problem exists on websites such as espn.com but works on others such as hulu and youtube. It exists on Google Chrome and Firefox. I had some adblock and flash add-ons in Firefox, but I have the add-ons disabled. And the problem exists in both browsers. It has been a problem for less than a month but I am not sure entirely how much longer. I was outside of the US until recently, the problem may have corresponded with return but I am not sure. I have uninstalled and reinstalled Flash to no avail.
Does anyone have any ideas? Much appreciated.

I am facing the same issues as well. In particular, I can't play flash videos on www.blizzard.com as the video controls doesn't show up.
YouTube and Facebook flash videos work fine.
After deleting ~/Library/Preferences/Macromedia/Flash Player and ~/Library/Caches/Adobe/Flash Player, the controls appeared.
Perhaps you may want to try that?

Thunderbird 24.4.0 has removed a feature I used - the ability to only show unread messages when viewing a mailbox. "quick filter" does that, but not persistentl

How can I set the view to only show unread messages persistently for a mailbox (e.g. junk)?

I used to be able to set it by folder. Removing the feature does not make the product better. I have no desire, for example, to see all the old spam, but I do want to see my old mail. I don't understand what the developers were thinking when they removed this capability.

When I open my "Mail" app it only shows 2 messages when I know there are more. How do I resolve this?

When I choose my "Mail" app it only shows 2 messages in my inbox when I know there are more. How do I resolve this? Thanks.

You need to create HTML signatures for use with the Apple Mail apps. You can't just throw in a logo, it has to be stored on the internet and it's location coded into your signature. You may find a service and an app that helps you do that in the iTunes App Store.

My computer crashed and I had it fixed however my itunes is only showing 67 songs when I had 1300 songs. How do I get my music back?

Hi. My computer crashed and now i'm only showing 67 songs in my I tunes account. I should have over 1300 songs. How can I get my music back?

Click here, follow the instructions, and back the library up.
(70919)

Dynamic Parameter only showing 1000 records when Crystal report is run.

I have created a crystal report using ODBC access to a table that has 3000 records. I created a dynamic parameter to pull a list of all the Customer ID's in a customer table and the parameter will only show the 1st 1000 records. In addition I cannot type in the customer ID that I would like. Version of Crystal - Crystal 11.

Oh, darn. So sorry. Looks like I hyperlinked the wrong URL (You'd think I got that down by now...). Anyhow here is the correct link:
1218588 - How to increase the number of values in a dynamic parameter list in Crystal Reports?
And in case the link does not work, or I goofed again, here is a copy of the resolution:
Resolution
CAUTION
The following resolution involves editing the registry. Using the Registry Editor incorrectly can cause serious problems that may require you to reinstall the Microsoft Windows operating system. Use the Registry Editor at your own risk. For information on how to edit the registry key, view the 'Changing Keys and Values' online Help topic in the Registry Editor (Regedit.exe). It is strongly recommended that you make a backup copy of the registry files before you edit the registry.
To increase the maximum number of values available in a dynamic parameter list of values, set the registry key: MaxRowsetRecords, to a value greater than 1,000.
Open the Microsoft Registry Editor, and navigate to the path corresponding to the version of Crystal Reports used:
Crystal Reports XI:
- HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports XI R2:
- HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 11.5\Crystal Reports\DatabaseOptions\LOV
Crystal Reports 2008:
- HKEY_LOCAL_MACHINE\SOFTWARE\Business Objects\Suite 12.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports 2011:
- HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports 2013:
- HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Suite XI 4.0\Crystal Reports\DatabaseOptions\LOV
Crystal Reports for Visual Studio 2010:
- HKEY_LOCAL_MACHINE\SOFTWARE\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Crystal Reports\DatabaseOptions\LOV
NOTES:
- Add the key: LOV, if it is not present.
- For 64 bit version of Microsoft Windows, the registry path will be slightly different, it will start with:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\...
But the rest of the registry path is the same.
Add the String value: MaxRowsetRecords
Set the value of: MaxRowsetRecords to the maximum number of values to display in the List of Values.
For example, a value of 2000 will return up to 2000 values in the lowest level of a dynamic cascading parameter.
IMPRTANT NOTES:
- The higher the number of values is, the longer it will take the see the dynamic parameter prompt screen. In brief, it impact the performance.
- The value 0 (Unlimited) will not work with BusinessObjects Enterprise XI or Crystal Reports Server XI, you must specify another value.
After making changes to the registry, close and reopen Crystal Reports, or restart the Crystal Reports services for the BusinessObjects platforms.
- Ludek

6500 classic - NSU software only shows 4.80 when 4...

NSU only shows 4.80 for my black 6500c and I upgraded it from 3.21, but my cousin's gold 6500c came with software version 4.84.
I even checked for new version and it only showed 4.80. I went ahead and reinstalled it.
How come I can't get 4.84?

The two main reasons for this are regional variations in phone models and operator-variant software. See the stick in Software Updates for more info.

Flash ComboBox only showing 2 rows when embedded in Connect

Similar Messages

Maybe you are looking for