Footage  jittery in fcp screen but good in blackmagic monitor hdmi screen

I filmed footage on a ex1 at hdv level 1080i 1440 pal all looks good on camera, all looks good when you play it out on the camera on component into a plasma screen
so I have imported the footage off the chips into final cut pro. On the motion shots lets say pan left to right, slow 360 pan the footage the fcp poxy screens give it a jittery look, I have a black magic hdmi output on it going to a plasma screen and its a smooth as it should be.
I would not usually worry as a proxy screen built in to edit suites can show that sometimes but when I export the footage the "jittery frame look" is on that too!
on the export I have tried de interlace but still no luck.
Any ideas on how to stop it looking jittery when it should not be? it was shot pal 25 and when I imported its said "lets make a time line to fit this" and I said yes.
Your help would be great,
regards
Daz

here they are,
General
fame size 1440 x 1080
Aspect HD 1440 x 180 16:9
Pixel HD 1440 x 1080
Feild dominance upper odd
editing time base 25
quicktime video settings
compressor HDV 1080 50i
quality 100%
audio 48 k 16 bit grouped
Video processing
render in 8 bit yuv
processing max white as whote
mtion filter quality normal
render and paly back
filters tick
frame blending tick
res 100%
codec apple pro res hd cam ex only
master templated and motion projects
quality normal.
I have done more testing today of course,
this is the video file I am having problems with
http://www.vimeo.com/1578148
its about 25 seconds in on the 360 pan
I loaded the same clip on to avid liquid and that done ot to ( but in most cases it always had and as it was a proxy screen people said dont worry )
on the avid liquid I exported it to wmv hd and played that back, yes that jitterd, so on avid liquid I mad a short dvd and played that direct on a dvd player and my plasma screen and it was fine.
I am new to fcp and dvdpro but tried making a dvd today with that clip
and ****, the whole film jitterd like crazy it was like double vision so on that bit I must blame my self and try again, must be a setting I missed some where.
But back to my fundemental problem of exporting to a file that ( pan ) bit in paritular strobes slightly on the fields.
I hope the vimeo clip I have pasted shows you the situation,
regards
desperate from newbury

Similar Messages

  • I restored my ipod touch because it had a white screen but after it finished restoring the screen was still white what should i do?

    i restored my ipod touch because it had a white screen but after i restored it the screen was still white what should i do?

    Sounds like a hardware issue. Make an appointment at an Apple Store.

  • PLEASE HELP........import 720p to FCP HD, but it is small in the screen.

    So i import 720p footage to fcp. The specs of the footage are 1280 x 720, 24 fps.
    compressor - photo - jpeg, pixel aspect: square.
    I set up the project.
    frame size 1280 vs 720, hdtv720p (16:9), Pixel aspect square
    Quicktime video settings : h.264.
    When the footage is in the viewer it is does not fill up the screen(black box around it). When I export the video is small with the large box around it.
    What am I doing wrong?

    http://support.apple.com/kb/TS1591
    There have been some problems accessing pages on the Apple web site.  If the hyperlink gives you a "We're sorry" message, try again.

  • Itunes converter produces white screen but good audio

    Hi,
    I think some people have had this problem before but i didn't see it listed here so i decided to see if anyone knew of a solution
    i can transfer a dvd that i have, onto my computer then convert it to mp4 format and put it in my library. However when i sync it to my ipod touch, its played in widescreen format with two black bars, one on the top and the other on the bottom. so i tried to convert it by right clicking on it and saying convert to ipod/iphone. it converts it but the result is the movie with perfect audio however the screen is white throughout. Does anyone know of a solution? Maybe with the settings?

    Yeah, go back to your original file! The bars above and below are because of the widescreen format - it's normal. You can't fill the touch screen of a widescreen movie without either clipping the left and right of the image or getting the top/bottom bars you described. If you create an mpeg4 file first, you don't need to have iTunes do any conversions.

  • HT201177 I get a chime and white screen, but after a few minutes the screen goes black. Help!

    I came out to a black computer screen. I can see the mouse arrow but otherwise nothing. I disconnected the computer and tried turning it back on. It starts up like usual but bar going across under the apple freezes and the screen goes black. I can hear the computer running. Help!

    That's just the iPod's backlight timer going off, signaling the iPod's backlight to turn off to conserve battery power.
    B-rock

  • I dropped my iPod 4th generation it's don't have a completely white screen but it still works just the screen looks like a negative

    Dropped my 4th generation iPod now the screen looks like a negative picture. Everything still works just hard to see anything. Please help!!!!!!!!!!!

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Go to Settings>General>Accessibility and see if Invert Colors is on. If On turn it Off.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:
    iOS: How to back up
    - Restore to factory settings/new iOS device.
    iOS: How to back up your data and set up as a new device
    - Make an appointment at the Genius Bar of an Apple store.
    Apple Retail Store - Genius Bar

  • Tcode opens selection screen, but does not executes the program

    Hi!
    tcode opens selection screen of a custom program, but it seems that it does not executes the program itself.
    Sounds strange, but how to explain this if I can run a program manually with no problem and it displays result screen, but when I try to run the program with tcode - it opens selection screen but program quits before displaying result screen. I was putting a breakpoint at the begining of the program - it does not triggers debuger when running a tcode (it triggers debugger if to run program manually).... any ideas?
    Help will be appreciated,
    Mindaugas

    Are you using this???
          SET PARAMETER ID '80B' FIELD T_TABLE-OPBEL.
          CALL TRANSACTION 'FPE3' AND SKIP FIRST SCREEN.
    That way it should work....
    Greetings,
    Blag.

  • Good evening, my name is Ludmila I have a problem. im buy second hand iphone 5 but I can not use the screen shows asking me apple id but I do not know this is my first iphone I do not know what the police thought it was stolen or lost but I you can help m

    Good evening, my name is Ludmila I have a problem. im buy second hand iphone 5 but I can not use the screen shows asking me apple id but I do not know this is my first iphone I do not know what the police thought it was stolen or lost but I you can help me. Someone told me we should stop function Find my iphone but how?? email does not even know the first lord. It cost me 400 euros but may not use iphone. someone laugh at me because I deceived. Please help me tell me his email talk to you should stop off iCloud or ID

    Scuzati de engleza google translate

  • White screen but has good video

    everytime that I try to watch a video with Quicktime all that I get is a white screen, but I can see the audio and duration bar. it used to work but does not anymore. i tried to get the help to fix it through Apple Care Protection Program (cost me 100 bucks) and they were no help all they did was send me a lame link that was pointless. HHHHHHEEEEEEELLLLLLPPPPP!!!! i have noticed that some of you all have had this problem i hate to say that I don't really understand all the things people have sugested to try.

    Open the file with QuickTime Player.
    Open the Movie Inspector window and note the video codec used in the file.
    Do a Google search for that codec name and install the version appropriate for your machine.

  • Jittery crawl fcp 7

    As per the topic - crawl inside FCP7 looks jittery on monitor output - like a field dominance issue. Tried changing fields to no avail. We have 2 edit machines running same version of fcp7 ( but with 2 licences of course! :)) and both are doing the same thing. One is 2006MP other is a 2008MP. We are both using Blackmagic hd extreme for output. Can anyone else reproduce this?

    Thanks for your concern Jim I am calm. I Just wanted someone else to try it to see if they had the same result.I don't see why in fcp 6 the output to the monitors was fine but not so in 7. I've posted a couple of movs but you can't really see what I'm talking about because when I export to a mov it seems not too bad. My problem is going to tape it comes out like it does on the monitors. Not good. Anyway have a look at the movs as there is a slight difference. The 1st one (cars) is rendered in fcp 6http://www.makadvertising.serveftp.net/downloads/files/parrynewest8.mov and the 2nd in fcp 7 (food).http://www.makadvertising.serveftp.net/downloads/files/jupmgrillava.mov Like I said this is much more noticeable when outputting to my monitor, but if noone but us is having this issue maybe its a blackmagic thing.

  • I can't import MXF files shot on a Canon C300 into FCP 10.1.2.  I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.

    I can't import MXF files shot on a Canon C300 into FCP 10.1.2.  I have the Canon plug in for MXF file to FCP import but FCPX still doesn't recognize MXF files when I try to import. Premiere works fine importing MXF on the same computer.  Any help is appreciated.

    Russ and Luis,
    I did uninstall and re-install Canon XF Utility and the Canon FCPX plug in.   Still no luck.  I checked the CanonXF64.RADPlug folder is on my computer in the Rad Plugins folder in application support  This is where it is supposed to be as far as I can figure out. 
    Another piece of the puzzle is that  footage shot on a Canon C300 in 2013 and  I reimported today and it DOES import into FCP10.1.3.   Footage shot on a different Canon C300 filmed this summer will NOT import into FCPX.  The latter will import into Premiere. But I am trying to work in FCPX, but maybe I shouldn’t be??
    Any ideas?  (screen shots below)
    Thanks.
    Peace, Huey
    FYI Here is what Canon says
      "There is another trick that works sometimes though.  Try uninstalling the plugin and XF Utility.  Then, install the latest XF Utility, followed by the plugin, in that order."
    I did do this but no results.  Otherwise they say I need to wait for a new plugin.
    Here's 2014 Canon C300 files does NOT import to FCPX
    Here's 2013 Canon C300 files does import into FCPX.  I thought it was Contents folder but another set of footage shot on C300 does import and there is no contents folder for that. 

  • Frozen with white screen but unable to reload software

     Please can someone help me as I'm about to throw my Blackberry out the window!!
    Yesterday I downloaded the Facebook update which requested me to reboot, my blackberry was then stuck on the white screen all day yesterday.  I have managed to attached my blackberry to my pc and remove some of the apps as I know the memory was low. When trying to install I'm getting these error messages: application loaded could not connect to your device.  There might not be any software installed on the device (it says if your device is not working please click ignore to continue loading software, which I did).  Then I get 'an error has occured while downloading software for your verify your internet connection.
    After trying several times I clicked on the View Other Versions button and it says that 4.6.1.168 platform 4.2.0.94 is currently installed already and is there twice?
    The phone screen shows error message 552 reload software.
    Thank you

    thanks for getting back to me.
    OK, fine, i need FCP. BUT they won't read in quicktime either. If they're quicktime files, then i should be able to see AND hear them in Quicktime player, vedad?
    There has to be something that i can download or something that makes this work... My FCE is HD compatible. If it won't work with my footage then what's the d* point?

  • Using local/testing server with cs5 inserting images look fine in the split screen but do not show

    Hi
    If I open example: header.php and insert any photo jpeg/.html ecs i can see the images in the split screen but not in the browser if i save then refresh. I am able to make any change to the code ecs. and they are reflected just fine. I have tried this with my fireworks images .html and when that did not work i tried a strait jpeg off the desktop. This all did not work. I have deleted the local server then step by step created a new one via devnet instruction. This did not work! everything looks fine i even tried in 3 sep browsers with 0 luck....There is no remote server connected at this time because i am making a child theme for my current site. After all changes are done we will the ftp the word press files to site and change.
    Ps i even started over from scratch with 0 positive affects....

    After a lot of pain!!!!!!! the issue is fixed lol After 3 weeks I have overlooked the obvious !!! so the simple fix was the path of the image. Yes i feel stupid 10 years in lol....
    Apparently dreamweaver cs 5 will not use the full path when inserting images into the page example: If you drag the image out of your assets folder or however you do it, DW will give you a path like this <img src="images/glass.jpg" width="800" height="729"> This is not the full path and when your pist!!! you cant see things like that ;( so the image path should look like this:
    <img src="wp-content/themes/adszoom/images/glass.jpg" width="800" height="729">
    also in the html files example of bad then good!
    <!--======================== BEGIN COPYING THE HTML HERE ==========================-->
    <img name="navigation" src="navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
    <map name="m_navigation">
      <area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
      <area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
      <area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
      <area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
      <area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
    </map>
    <!--========================= STOP COPYING THE HTML HERE =========================-->
    </body>
    NOW THE GOOD!
    <!--======================== BEGIN COPYING THE HTML HERE ==========================-->
    <img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
    <map name="m_navigation">
      <area shape="poly" coords="804,7,994,7,994,47,804,47,804,7" href="http://adszoom.com/699-2/" title="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" alt="SEARCH BY CATEGORIES FOR CLASSIFIED ADS" >
      <area shape="poly" coords="602,8,792,8,792,48,602,48,602,8" href="http://adszoom.com/wp-admin/edit.php/" title="VIEW OR EDIT YOUR CLASSIFIED ADS" alt="VIEW OR EDIT YOUR CLASSIFIED ADS" >
      <area shape="poly" coords="405,8,595,8,595,48,405,48,405,8" href="http://adszoom.com/post-an-ad/" title="NEW CLASSIFIED AD POST" alt="NEW CLASSIFIED AD POST" >
      <area shape="poly" coords="206,8,396,8,396,48,206,48,206,8" href="http://adszoom.com/help/" title="HELP WITH YOUR CLASSIFIED ADS" alt="HELP WITH YOUR CLASSIFIED ADS" >
      <area shape="poly" coords="3,9,193,9,193,49,3,49,3,9" href="http://adszoom.com/" title="HOME VIEW CLASSIFIED ADS" alt="HOME VIEW CLASSIFIED ADS" >
    </map>
    <!--========================= STOP COPYING THE HTML HERE =========================-->
    </body>
    THIS LINE IS YOUR ISSUE
    <img name="navigation" src="wp-content/themes/adszoom/images/navigation.gif" width="1000" height="50" border="0" usemap="#m_navigation" alt="">
    Ok thanks and if there are any issues with dw please ask: [email protected]

  • HT4061 how can i lock my screen on my iphone that was stolen tonite.  i already suspended service to the phone but i want to lock the screen

    how can i lock my screen on my iphone that was stolen tonite, i already suspended the service to the phone, but apparantly there is a way thru icloud to lock screen and when i log into icloud, i do not see the option to select devices.  if so, that is where i can lock the screen, but i can not seem to get to that.
    thanks
    D

    A. Only if the device is online.
    B. Only if you set up Find My Phone before the theft.
    What To Do If Your iDevice Is Lost Or Stolen
    If you activated Find My Phone before it was lost or stolen, you can track it only if Wi-Fi is enabled on the device. What you cannot do is track your device using a serial number or other identifying number. You cannot expect Apple or anyone else to find your device for you. You cannot recover your loss unless you insure your device for such loss. It is not covered by your warranty.
    If your iPhone, iPod, iPod Touch, or iPad is lost or stolen what do you do? There are things you should have done in advance - before you lost it or it was stolen - and some things to do after the fact. Here are some suggestions:
    This link, Re: Help! I misplaced / lost my iPhone 5 today morning in delta Chelsea hotel downtown an I am not able to track it. Please help!, has some good advice regarding your options when your iDevice is lost or stolen.
      1. Reporting a lost or stolen Apple product
      2. Find my lost iPod Touch
      3. AT&T. Sprint, and Verizon can block stolen phones/tablets
      4. What-To-Do-When-Iphone-Is-Stolen
      5. What to do if your iOS device is lost or stolen
      6. 6 Ways to Track and Recover Your Lost/Stolen iPhone
      7. Find My iPhone
      8. Report Stolen iPad | Stolen Lost Found Online
    It pays to be proactive by following the advice on using Find My Phone before you lose your device:
      1. Find My iPhone
      2. Setup your iDevice on iCloud
      3. OS X Lion/Mountain Lion- About Find My Mac
      4. How To Set Up Free Find Your iPhone (Even on Unsupported Devices)

  • Not only a yellow screen, but its dark and grainy

    There are so many fora discussing the yellow tinted screen. I got my really yellowish screen replaced and now I have a nice iPhone 3G with a yellowish tint BUT with white whites. The icons look great now! This is good and I gather that this is how it was meant to be. However, now that the graphics looks great in general - the multimedia graphics are still much to red/yellow and dark - that is album covers, films, photos and pictures taken with the camera. AND, since they are very redish-yellow the low keys in dark and neutral areas become much more grainy. I cant even use my photos like a portfolio anymore, compared to the old iPhone. The camera performance have always been quite good for a 2 mp camera, but now it takes quite bad pictures due to this fancy and deliberately made tint with grains as a result.

    Thanks for reply, but no I have firmware 5A347. I have seen the screens of at least ten various iPhone 3G´s with that firmware and they look almost the same as mine - as described above. I think this is how Apple wanted them, but not to everyones pleasure. And as such its NOT the same screen as the first gen. iPhone as claimed during Steve Jobs presentation. At least mine is not, among many many others...

Maybe you are looking for