For those having EAP auth issue using the ACS appliance

Thought I'd pass along my config and resolution to an issue I was having concerning EAP-TLS auth on an ACS appliance.
We have two ACS Solution Engines (3.2.2) running and doing a database synch and using Generic LDAP as the external database. We did the certificate walk through for the ACS and then turned on EAP-TLS auth. We are trying to use EAP-TLS auth for wireless access through our AP1200s and Windows XP laptops, but we kept getting errors.
After digging for days I found out that when you request a certificate it pulls the CN name. Our CN name in Active Directory did not match our login name. I changed my CN name to match my login name and I was then able to grab a certificate and authenticate using EAP-TLS for our wireless.
I am in the process of upgrading our ACSes to ver 3.3.2 so that I can run the Remote Agent for Windows on a Windos 2003 server and then use the Windows database as the external database and not Generic LDAP.
I hope this helps someone!
Jeff

The document discusses the Extensible Authentication Protocol Transport Layer Security (EAP-TLS) authentication protocol deployment in wireless networks.
http://www.cisco.com/warp/public/cc/pd/sqsw/sq/tech/acstl_wp.htm

Similar Messages

Post Moved for-those-having-wifi-issues

Moved http://community.bt.com/t5/Other-BB-Queries/for-those-having-wifi-issues/td-p/803138
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

might be lack of sleep but you've lost me there lol
not the first device? the modem, but the HH3 via wifi, I thought it was the HH3 broadcasting the wifi signal and what you connect to?
upped the youtube playing videos to 35, also on wifi, not a single problem, 1 hr, hope I don't get a call tomorrow lol about high usage, all in the name of science!
with the ipad and iphone, normal usage, not seen a single drop in wifi connection, seems to be when the device is being heavily used, with playtube, it converts and downloads the youtube video to play offline on the device
playing seems to be fine, just when downloading when it has a problem

Greetings, I'm having trouble with my iMouse continually disconnecting from my MacBook Pro in Mavericks. The batteries are solid. I just eliminated the bluetooth for my headphone. I have used the mac to cast on my TV. I use bluetooth. ANy ideas?

Greetings, I'm having trouble with my iMouse continually disconnecting from my MacBook Pro in Mavericks. The batteries are solid. I just eliminated the bluetooth for my headphone. I have used the mac to cast on my TV. I use bluetooth. ANy ideas?

Hi clemenbw,
Welcome to the Apple Support Communities!
In your situation, I would recommend reading over the attached article to help you troubleshoot your Magic Mouse Bluetooth connectivity issues.
Troubleshooting wireless mouse and keyboard issues
Have a great day,
Joe

An issue using the COM components supplied with SAP GUI 6.2 or 6.4

We are having an issue using the COM components supplied with SAP GUI 6.2 or 6.4. We used to have SAP 4.6c and now we have 5.0. When we were on 4.6c, we used these COM components to logon and execute RFC calls and we had much success. Now that we are on 5.0, we cant seem to instance any SAP functions that have something to do with SAP Workflow. We have experienced this problem when using VB6 or .NET, but our existing code that always worked is in VB 6.0.
SAP Components used:
o     SAP Logon Control
o     SAP Function Control
o     Librfc32.dll
o     Other supporting C DLLs and/or COM object supplied with the SAP GUI installation.
For example, if we want to call the RFC ARCHIV_CONNECTION_INSERT, this code fails in VB6 when the Set objworkflow = objFuncCtrl.Add(strFunction) line of code executes. Instead of returning an instance of the object ARCHIV_CONNECTION_INSERT function, no object is created. In 6.2, SAP raises no errors, but the object we are trying to create is still Nothing. If we use 6.4, SAP raises an error SAP data type not supported via a message box and then the object is still = Nothing. Interestingly enough, the 6.2 GUI COM controls dont display the error dialog. The message box that is shown comes from the SAP Function COM Object "SAP.Functions" (wdtfuncs.ocx).
Now, what is interesting is if we use the same code to call a standard function or custom function that doesnt have anything to do with SAP Workflow, then the code works fine. Again, all of our code used to work just fine on an SAP 4.6 system.
Here is the code that fails:
    'SAP Logon control - object for creating connections to an SAP system
    Dim objSAPLogonCtrl As Object
    'SAP connection object
    Dim objConnection As Object
    'Object that will represent the SAP function called
    Dim objSAP As Object
    'SAP function control object - object factory for creating other SAP function objects
    Dim objFuncCtrl As Object
    'Create instance of an SAP logon conrol
    Set objSAPLogonCtrl = CreateObject("SAP.Logoncontrol.1")
    'Create a connection object
    Set objConnection = objSAPLogonCtrl.NewConnection
    'Define connecion parameters
    objConnection.ApplicationServer = "sapvm"
    objConnection.SystemNumber = "00"
    objConnection.Client = "800"
    objConnection.User = "iissap"
    objConnection.Password = "tstadm"
    objConnection.Language = "E"
    objConnection.TraceLevel = 10
    'call the logon method of the connection object
    If objConnection.Logon(0, True) = False Then
        MsgBox Error
        Exit Sub
    End If
    'Create an instance of the SAP Function control object
    Set objFuncCtrl = CreateObject("SAP.Functions")
    'Set the function control connection object
    Set objFuncCtrl.Connection = objConnection
    'Function name to be generated and called
    Dim strFunction As String
    strFunction = <b>"ARCHIV_PROCESS_RFCINPUT"</b>
    'Create an instance of the function defined in strFunction
    Set objworkflow = objFuncCtrl.Add(strFunction)
    If objworkflow Is Nothing Then
        MsgBox "Could not create object " & strFunction
    Else
        MsgBox strFunction & " object created."
    End If
If anyone has seen anything like this or has any ideas, please help!
Mike and Hameed
<b></b>

Hi,
documentation on the Scripting API is available at ftp://ftp.sap.com/pub/sapgui/win/640/scripting/docs/
This API is a replacement of the existing, obsolete COM interfaces.
Best regards,
Christian

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Why yahoo/gmail retrieval and facebook app so so slow when in WIFI. But using the internet to check for emails and facebook is fast using the same WIFI connection??

Hi SandyS_VZW,
Yes tried resetting the wifi connection and problem still persist.
Here it is...to make it clear. Connected thru the same wifi at home...
-> emails (yahoo/gmail) and facebook WEBSITES are working fine and fast when using/accessing thru a browser (chrome/samsung browser) - no problem with this.
-> emails (yahoo/gmail) and facebook APP is soooooo sloooww (thru the App). Slow I mean comparing it to using their browser/websites... news feeds/emails refreshing so quickly but not when using the APP installed in Samsung Galaxy Note 4. Slow like - It will take around 5-10minutes just to get your emails and news feed refreshed.
THIS HAPPENS ONLY WHEN CONNECTED THRU A WIFI which has a speed of 10-20mb. It is not happening when connected to the network data/plan.
My wife has the same Samsung Galaxy Note 4 (coming from different provider at&t) - same setup (emails, fb app), same wifi connection, but she's not experiencing anything like it.
Not sure why, I dont want to believe that while connected to a WIFI, Verizon is restricting anything and ******* me off to make me switch to my data plan connection everytime - which is Unfair!
Was there a known issue similar about this case?
thanks,

TS4036 I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

I purchased an iphone for my daughter and we are using the same account and she deleted some contacts from her phone and they were deleted off of my contacts as well. Is there a way to use icloud backup to reinstall the contacts to my phone?

Welcome to the Apple community.
You can only restore them from a Computer backup. This has occurred because you are sharing an iCloud account. ideally you should each have your own iCloud account, that way you can each manage your own mail, contacts, calendars, documents etc and avoid unintentional deletions and unwanted editing. If there is information you wish to share between you, this can be done with a secondary account.
Having separate iCloud accounts, doesn't mean you have to have separate iTunes accounts, so whilst you keep your personal data separate, you can continue to share music, apps, books, TV shows, movies etc.

My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. Any tips?

My iPod touch is having a little issue with the volume. When I plug in my headphones the volume works fine. When there aren't any headphones plugged in, no sound comes out from my iPod. When I go to turn up the volume, it still says headphones. I tried restarting it a few times, nothing worked. I looked up many tutorials, and still nothing did the trick. Any tips?

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on

I bougnt my S5 a month ago and I am having two major issues. The screen is very slow to respond. When the screen is dark and I press the home button, it doesn't come on. I have to press the button anywhere from 4-10 times and then it usually flashes on and back off. It is very, very frustrating. The other issue is that the battery drains very quickly. I have called Verizon numerous times regarding these issues. They tell me to do different things that never help. We eventually did a factory reset and it still has the same issues. Help! It is a brand new phone and unfortunately I am in a new two year contract. Ugh. Is there anyone out there who can help me?

I have done that several times. In fact, every time I call Verizon with my phone problems, they have me do the same things repeatedly. I keep telling them I have already done them but they insist they are SURE it will work this time. It never does. After doing the factory reset and it still not working correctly, they act like they are confused, almost like I am lying. I did what you suggested above on the slim chance it would work this time but it did not. I bought two S5's that day and the other one works perfectly fine. I know I got a bad phone. Verizon just does not listen. It is a bad phone. I just want a new phone that works properly. Is that too much to ask? I bought a new phone that has been bad from day one. Why oh why do I have to spend hours of my time on the phone, in the store, on the computer, trying to rectify this? It shouldn't be this difficult! Help please!!!

I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone. I don't want her contacts! How do I get rid?

I share a macbook with my other half and we both use it for our iphones. When syncing using the new software I now have all of her and my contacts on my phone. I don't want her contacts! How do I get rid?

Hi,
You have 2 solutions:
1 - You can use 2 differents icloud account
2 - You use the same account but you don't sync yours contacts.
You configure that in Settings > icloud
You activate or desactivate what you want.
Have a nice day.

About a year ago I purchased the student addition of the Adobe Creative suite 6 Design Standard and just recently purchased an additional computer for my home. Can I use the same disc that I previously purchased to download the program?

About a year ago I purchased the student addition of the Adobe Creative suite 6 Design Standard and just recently purchased an additional computer for my home. Can I use the same disc that I previously purchased to download the program?

Yes, as long as the machine meets the system requirements for the software you can install and activate it. Your license allows you to have the software installed and activated on two machines.

How do i search for a photo album when i use the search facility on my iPad or iPhone it will not find photo albums of a given name can anyone help

how do i search for a photo album when i use the search facility on my iPad or iPhone it will not find photo albums of a given name can anyone help

Photo albums are not searched by Spotlight Search. Go to Settings > General > Spotlight Search to see and reorder the available search items.
For more details, see page 12 of the iPad iOS 5.1 User Guide

Why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloadi

why do i get the following message when i attempt to open my backup file for lightroom cc? "Lightroom cannot use the catalog named "Lightroom Catalog" because it is not writable and cannot be opened". This message just started coming up after downloading lightroom cc (previously using lightroom 5)...am i backing up properly or not???

Open Pictures folder and move the files named lrcat-journal and lrcat.lock to Desktop.
Make sure that , they are not inside Pictures folder any more and try to open backup from Lighrtroom and check..
Any LRcat file with .lock extension , move it to Desktop.

Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

Do I need to buy a new printer, dedicated for my Mac or can I use the same one we use for our PCs?

Hello stacksofamber and welcome to Apple Support Communities,
You should be able to find a Mac OSX driver for that printer. Did you check with the manufacturer/'s website?

IPhoto is appearing as free on MAC store and it is also featured as one of the top 10 free apps, when i downloaded it, my credit card got charged for 790 rupees. I am using the latest OSX Maverick

iPhoto is appearing as free on MAC store and it is also featured as one of the top 10 free apps, when i downloaded it, my credit card got charged for 790 rupees. I am using the latest OSX Maverick.

And yet to download the app you clicked on a button that told you that the app would be 790 rupees for you.
The iLife apps and the iWork apps are only free when you qualify to get them free. And when you get them free the buy button to download them says free. When the buy button has a price on it, that is how much you will pay for the app.

I'm applying for jobs online through my iPad using the safari app. For some reason when I try to attach my resume, which I have saved in Pages, it does not give me an option to go to Pages. It only gives my an option to choose a file from photos. Does it

I’m applying for jobs online through my iPad using the safari app. For
some reason when I try to attach my resume, which I have saved in
Pages, it does not give me an option to go to Pages. It only gives
my an option to choose a file from photos. Does it not have the
capability to choose a location other than photos??

No. Safari does not have the option to attach files for uploading other than photos.
Look at iCab Mobile in the App Store. There are other browsers that may do this, but I'm pretty sure that iCab will fill the need.
iCab Mobile (Web Browser) on the App Store on iTunes
take a look at this.
http://www.icab-mobile.de/faq.html

For those having EAP auth issue using the ACS appliance

Similar Messages

Maybe you are looking for