Force Sensor with Signal Conditioner to NI 6009 DAQ

Hello,
I am currently conducting a unique impact test using a pendulum. Currently, there is a rotary potentiometer measuring the shaft rotation and a force sensor to measure the impact. The rotary potentiometer and DAQ work like a charm in SignalExpress but I am currently having problems with the force sensor.
The setup:
Force Sensor --> Signal Conditioner Box --> DAQ (Analog Input 1 & Corresponding Ground).
In Signal Express, when I procede to "Add Step" - should I be choosing "Acquire Signals --> DAQmx Acquire --> Analog Input --> [Voltage? Force? Custom?]
Thanks a million,
AW (big noob)
Solved!
Go to Solution.

Hi a_wishart,
I don't think the evaluation version of Signal Express is the reason you are getting that error, please see the related document, as there are multiple possible causes for that error.
http://ae.natinst.com/public.nsf/web/searchinternal/485201b647950bf886257537006ceb89?OpenDocument
-N
National Instruments
Applications Engineer

Similar Messages

I have an SCXI-1531,1126,1120D (with 1327) connected to PCI-6052E. How can I measure an ICP force sensor with some/all of this?

As I understand it, I may only need to use the 1531. Although it says it is used for accelerometers, it sounds like the techincal specifications of the card are adequate. I will be measuring in the range of 30 Hz with force sensors. The sensors are made by PCB Piezoelectronics, model 201B02. This equipment was somewhat inhereted, so I don't really know what of it I must use, or how. Any guidance would be appreciated.

Dave,
It appears that your force sensor is compatible with the SCXI-1531. This module supports all Integrated Electronic Piezoelectric (IEPE) sensors. Thus, it is not limited to accelerometers. I examined the data sheet for your sensor, and it indicates that a Constant Current Excitation of 2 to 20 mA is required. The SCXI-1531 provides a constant current excitation of 4 mA. In the same way, it appears that the other specifications of your sensor are compatible with the SCXI-1531.
Good luck with your application.
Spencer S.

Foot Force Sensor

Hello People,
I am currently enrolled in a course (mechanical measurements) which requires a project from us.
Unfortunately, we decided to go with a relatively 'over our level' project instead of the recommended ones and even though the professor and t.a. were very excited about our project, we have recieved no help till now.
Our project is very similar to this one:
http://decibel.ni.com/content/docs/DOC-12243
Ofc our project is not exactly the same - we are just solely focusing on the force (the above one also has % body weight etc. which we don't need).
Where can I find the VI for the above project? If not, where should I begin?
Basically we have two sensors and the circuit we've configured, and we now need to begin on the VI. I must mention that we will use a wireless DAQ.
So in that case, what should I do?

First install LabVIEW and the needed drivers (NIDAQmx for a starter, which should be installed when you install LabVIEW). This should also result in the installation of the National Instruments Measurement and Automation Explorer, referred to colloquially as MAX on these forums. This tool is VERY helpful when you are beginning a hardware project as it can allow you to talk to a lot of hardware before writing a bit of code (in any language), which allows you to troubleshoot hardware setups and connections separately from debugging your program. You mention a wireless DAQ, is it a National Instruments one? If so that is good, because MAX doesn't "play" with other companies' DAQ hardware, with the exception of those that are talked to through VISA (a driver abstraction that allows communications with serial, GPIB,TCP based instruments), but a non-NI wireless DAQ probably won't fall into this later categories. If it isn't a National Instruments DAQ all isn't lost, it will just be more difficult. You say the circuit you have configured. Do you mean designed, or have you connected and "configured" this, gotten information out of it? As to where the VI for the example you refereed to, probably on one of the author's laptops, or a CD in some professor's desk. The PDF diagram shows the entire vi, it would be mildly educational to replicate it from scratch, but I say mildly because it will have removed much of the thought process from solving the problem, will only be showing someone how to find the various components, which isn't very educational.
Look at your force sensors, see what their outputs are, voltage, resistance, whatever. Then try and determine how to take what is probably a small signal, which would be prone to picking up environmental electrical noise, and figure how to amplify the signal to a useable level. You determine what would be a useable level by looking at the requirements of the DAQ units inputs. Are the signals big enough? Do they change value at a rate/frequency that is compatible with the DAQ's inputs. You then build a basic VI to capture these signals, maybe display them (if the DAQ is compatible with MAX you can check out the hardware connections using that, which can also show you what kind of issues of electrical noise, etc., you may have.) Then once you have the basic VI working and successfully acquiring data you can start focusing on what to do with the data, what kind of "signal processing" you may have to perform to "clean up" the data to get at the underlying information.
But just copying someone else's work may get you the grade, but really won't help you when you actually have to do this from scratch in the real world. Make your mistakes in school, they are more forgiven, there usually are more resources to turn to for help, it is the place to make them. Not that you won't make mistakes once you are in the "real world", but it is usually better to do it in the "nest" of academia.
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

SC-2345 signal conditioner module

Has anyone worked with this hardware before?
DAQ interface to the [SC-2345] signal conditioner module. It is configurable with individual SC modules.
(2) Using equipment currently being procured: NI CompactDAQ 9181 over Ethernet housing one NI 9213 x16 channel thermocouple module.
Functionality should be such that a variable sample rate may be employed from 1 sample per second to 1 sample per minute for all channels. One sample per minute shall be the threshold requirement. Only temperature is expected to be measured. All available channels having temperature modules shall be measured and recorded. The data should be viewed on a graph for the current test mainly for troubleshooting and calibration purposes. All data shall be stored on hard drive to a data file in a usable file format, preferably *.csv file format. User interface shall support start and stop of a test in a single mouse or keyboard action. Each start of a new test shall create a new test data file not to overwrite other data.

What you are trying to do is possible with the equipment you have and LabVIEW. The 9213 has built in cold junction compensation for up to 16 thermocouple measurements.
To get started programming this try looking at the example under Help-> Example Finder-> Hardware Input and Output-> DAQmx-> Analog Measurements-> Temperature-> Cont Acq Thermocouple Samples-SW Timed.vi
This link may help you to program the start and stop for your measurements:
http://zone.ni.com/devzone/cda/tut/p/id/3331
Good luck!
Brian G.

Inductive proximity sensor with DAQ

Hi everyone
I am planing to connect my inductive proximity sensor with NI-9215 DAQ but not sure will that thing work perofectly. Also i don't know how to connect my sensor with the BNC terminal.
The sensor I am using is from automation direct AM9-05-1A with input volatage of 10-30 VDC and output voltage range from 0-5 VDC.
I want DAQ to monitor my output signal from sensor.

Hey lynn
I am planing to use NI-9215 DAQ. Here is the link for that.
http://sine.ni.com/nips/cds/view/p/lang/en/nid/208793.
Since this kind of DAQ has BNC type of connectivity with it so I am not sure how to connect my sensor with this connector.
Thanks

IMac G5 (no isight) will not start up.. fsck exited with signal 8

I have a 4-year old iMac G5 running leopard. WIll I was on internet, the computer froze; I shut it down (forced, as nothing else was possible) and when I tried to start up again, it would not boot. I entered the single use mode (apple+s) and run /sbin/fsck -fy and the file was modified. When I repeated, i got the following:
/dev/rdisk0s3
root file system
verifying volume when it is mounted with write access
checking journaled HFS Plus volume
checking extents overflow file
checking catalog file
disk0s3: I/O error
invalid record count
(4, 42378)
volume check failed
dev/rdisk0s3 (hfs) EXITED WITH SIGNAL 8
I tried to run disk utility from install Leopard CD, but is also failed...
any ideas?
please provide any help as I do not know what to do.
many thanks in advance for your time and help

Your drive directory is sufficiently hosed that neither Disk Utility nor the fsck routine can correct it.
Instead, use DiskWarrior from Alsoft to attempt to rebuild it.

Using a TCP/IP Connection to REQUEST and RECEIVE data from a iDRX Signal Conditioner through a EIS-2B Server

First let me say that I am new to labview, please bear with me. I want to use Labview to querry a iDRX thermocouple signal conditioner using tcp/ip. The signal conditioner is wired to a EIS-2B server. The server is at 198.162.10.53 and port 2000. The data request command is *10x01\r and the expected data to be returned is 01X01+00064.6 (or whatever the actual temperature is). The conditioner and server are working and testing correctly using the iDRX supplied software.
My attached vi runs, creates no errors, but returns no data either. I can find many examples of how to set up a listener, but I need to QUERRY and then RECEIVE the data.
Thanks in advance.
Attachments:
Alyeska 4.vi ‏15 KB

Hi Alyeska! Welcome to the forums!
I took a quick look at the VI, and I have four quick suggestions for
you that may give us some information about what is happening.
You may be experiencing an error that just isn't detected by the VI -
normally we add an error handling VI at the end of program execution to
report any errors that occurred. Also, it's helpful to have a way
to exit the while loop so that the program can finish executing if an
error occurs. Third, you may need to introduce a delay between
the query and the read command to allow the server time to process and
respond to the request. Lastly, if you already know how long the
return message will be, you should wire this length to the Bytes to
Read input of the TCP Read VI so it knows to return the data once it
receives that number of bytes. I've attached a modified version
of the VI incorporating these - give this a try, and let us know if you
still see an error, and if so, what error. Also, if you haven't
taken a look at it already, there are excellent resources for learning
LabVIEW at the LabVIEW Fundamentals page - it's a great way to introduce yourself to LabVIEW and get up to speed quickly.
Cheers,
Matt Pollock
National Instruments
Attachments:
Alyeska 4.vi ‏19 KB

Developed VI for data input from a Serial RS485 S. Himmelstein 700 Series Signal Conditioner

Has any one developed a VI for data input from a serial RS485 connection with S. Himmelstein 700 series signal conditioner. Multiple displays and channels. Labview 2009

Hi
I am using the same vi which you have suggested and i have selected proper com port and other settings, but i am not getting any data,but if i send "ADC0" and "*IDN?\n" command alternatively then it is giving the data...but if i do that i will get zero and data alternatively.I want to get data without zero in between.. any solutions on why i have to send *IDN?\n?
Expand.Evolve.Influence
Attachments:
Hammltn.jpg ‏91 KB

Is the connection of thermocouple need any signal conditioner if we use a NI USB-6216 Card?

I have a NI USB-6216 Card and I want to use it to measure a temperature using a thermocouple but I want to know if I need a signal conditioner circuit in this case
Best regards

Hi kukarobot,
Themocouples do typically require signal conditioning becuase they have such a small signal and are succeptable to noise because they are antennas. A low signal input range (minimum for 6216 is -200 to +200 mV) helps to get better resolution with the thermocouple, and a lotpass filter can help to knock off the noise on the line. This can be done in LabVIEW with a filter.
Also, you can opt for a low-cost TC01 for a single TC or multiple or USB 9211 or 9213 for multiple thermocouples. The devices have lower input ranges and the filtering built in.
Best,
Adam
Academic Product Manager
National Intruments

USB 6009 DAQ to use in Simulink at External mode with DAQ toolbox

hi
Currently I am using usb 6009 daq board for data acquisition in using simulink. I have created a model with taking analog input from data acquisition toolbox. Then when i want to run in external mode and try to connet to target, the following error is coming up:
Could not execute target data map file 'untitled_rtwin_win32\untitled_targ_data_map' or it does not exist. Stop the target, delete the untitled executable, rebuild the code,and try again. Note that execution of external mode requires the build directory to be present...
How can I solve this problem? For your info, I am using 32-bit matlab, version: 2012a
For your info, a snapshot of the error is attached,
Any help would be appreciated Thanks
Attachments:
Untitled.jpg ‏130 KB

Hi Mahmudur,
what does MathWorks say about this error message?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Can I use the same nike+ sensor with two differet Ipods and register the trainings in onmly one account?

Hello, I would like to know if I can use the same nike Ipod sensor with two different ipods. I want to use the same sensor sometims with an Ipod touch and sometimes with an Ipod Nano, I want my trainings with both Ipods to be registered to the same account. I want them to be registered to only one account, not as it had been used by two different people.

Of course. You should use the same AppleID on all your devices. Why would you create a new one?
Matt

GNU compiled app crashes with signal 11: Segmentation Fault

Hi Community,
I know this is not a GNU oriented forum, but maybe this is a common issue.
We have a C++ multi-threaded application running properly in Solaris 9 Sparc. Due to some issues mostly related to the NICs we needed to have the application running in Solaris 10 x86. The problem is that the compilation is ok (always with GNU) but during run time, we have the application crashing in different instructions because of a signal 11.
It always crashes in a malloc call within the libstdc++.so.6
It was compiled with the option -mt and -lthread. Is this a known problem? Do you recommend any direction to start seeking for a solution?
Pls, find attached the gdb outcomes after the crash.
Thanks in advance, Pablo
quiterio{root}# gdb cord /usr/nguser/core
GNU gdb 6.6
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB. Type "show warranty" for details.
This GDB was configured as "i386-pc-solaris2.10"...
Reading symbols from /lib/libsocket.so.1...done.
Loaded symbols for /lib/libsocket.so.1
Reading symbols from /export/home/mysql/mysql-5.0.51/lib/mysql/libmysqlclient.so.15...done.
Loaded symbols for /opt/mysql/mysql/lib/mysql/libmysqlclient.so.15
Reading symbols from /lib/libnsl.so.1...done.
Loaded symbols for /lib/libnsl.so.1
Reading symbols from /lib/librt.so.1...done.
Loaded symbols for /lib/librt.so.1
Reading symbols from /lib/libthread.so.1...
warning: Lowest section in /lib/libthread.so.1 is .dynamic at 00000074
done.
Loaded symbols for /lib/libthread.so.1
Reading symbols from /usr/local/lib/libmysqlpp.so.2...done.
Loaded symbols for /usr/local/lib/libmysqlpp.so.2
Reading symbols from /usr/lib/libz.so.1...done.
Loaded symbols for /usr/lib/libz.so.1
Reading symbols from /usr/local/lib/libstdc++.so.6...done.
Loaded symbols for /usr/local/lib/libstdc++.so.6
Reading symbols from /lib/libm.so.2...done.
Loaded symbols for /lib/libm.so.2
Reading symbols from /usr/local/lib/libgcc_s.so.1...done.
Loaded symbols for /usr/local/lib/libgcc_s.so.1
Reading symbols from /lib/libc.so.1...done.
Loaded symbols for /lib/libc.so.1
Reading symbols from /lib/libresolv.so.2...done.
Loaded symbols for /lib/libresolv.so.2
Reading symbols from /lib/libaio.so.1...done.
Loaded symbols for /lib/libaio.so.1
Reading symbols from /lib/libmd.so.1...done.
Loaded symbols for /lib/libmd.so.1
Reading symbols from /export/home/mysql/mysql-5.0.51/lib/mysql/libmysqlclient_r.so.15...done.
Loaded symbols for /opt/mysql/mysql/lib/mysql/libmysqlclient_r.so.15
Reading symbols from /lib/libpthread.so.1...
warning: Lowest section in /lib/libpthread.so.1 is .dynamic at 00000074
done.
Loaded symbols for /lib/libpthread.so.1
Reading symbols from /lib/ld.so.1...done.
Loaded symbols for /lib/ld.so.1
Core was generated by `/export/home/egasco/cord/cord'.
Program terminated with signal 11, Segmentation fault.
#0 0xfebd4ad2 in t_splay () from /lib/libc.so.1
(gdb) bt
#0 0xfebd4ad2 in t_splay () from /lib/libc.so.1
#1 0xfebd49b0 in t_delete () from /lib/libc.so.1
#2 0xfebd46ea in realfree () from /lib/libc.so.1
#3 0xfebd42ee in _malloc_unlocked () from /lib/libc.so.1
#4 0xfebd4138 in malloc () from /lib/libc.so.1
#5 0x080bdf64 in PMData::addData (this=0x818ae70, header=
{_M_t = {_M_impl = {<std::allocator<std::_Rb_tree_node<std::pair<const std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::basic_string<char, std::char_traits<char>, std::allocator<char> > > > >> = {<__gnu_cxx::new_allocator<std::_Rb_tree_node<std::pair<const std::basic_string<char, std::char_traits<char>, std::allocator<char> >, std::basic_string<char, std::char_traits<char>, std::allocator<char> > > > >> = {<No data fields>}, <No data fields>}, _M_key_compare = {<std::binary_function<std::basic_string<char, std::char_traits<char>, std::allocator<char> >,std::basic_string<char, std::char_traits<char>, std::allocator<char> >,bool>> = {<No data fields>}, <No data fields>}, _M_header = {_M_color = std::_S_red, _M_parent = 0x81ade48, _M_left = 0x81c2310, _M_right = 0x81ae900}, _M_node_count = 8}}},
data=0x81c1a20 "v=0\r\no=50 2890844526 2890842807 IN IP4 192.168.1.245\r\ns=SDP seminar\r\nc=IN IP4 192.168.1.245\r\nt= 0 0\r\nm=audio 9092 RTP/AVP 8 18\r\n", dest=ONEP_SIP) at PMData.cpp:23
#6 0x080b3a52 in UserCall::process_initialization (this=0x81c2630, packet=0x81ad128) at UserCall.cpp:505
#7 0x080b056f in UserCall::process (this=0x81c2630, packet=0x81ad128) at UserCall.cpp:132
#8 0x080791d7 in ONEPPacketManager::processPacket () at ActionNotAllowException.h:15
#9 0x080aa159 in onep_processing_thread (arg=0x8127e88) at CordApplication.cpp:1317
#10 0xfec34672 in _thr_setup () from /lib/libc.so.1
#11 0xfec34960 in L3_doit () from /lib/libc.so.1
#12 0xfe7e2400 in ?? ()
#13 0x00000000 in ?? ()

A crash in malloc in multi-threaded code could be a bug in the system malloc or a failure to use a thread-safe malloc. The default Solaris malloc in /usr/lib/libc.so.* is thread-safe.
A crash in malloc can also be caused by a heap corruption. Probably the most common causes of heap corruption are
- writing beyond the bounds of a buffer or variable (off by one, for example)
- deleting the same object more than once
- using an invalid pointer:
--- uninitialized
--- pointing to a deleted object
--- pointing to an out-of-scope object
- failure to guard a critical region
- failing to declare shared objects as volatile

Oracle Report Failed with Signal 11 Error

Hi,
I am modifying a query in one of the Report Groups,when try to run my report with New query I am getting Signal 11 error.
Original query is working fine but when run the report with modified query it is error with Signal 11.
Note :Modified query is not giving any error when running in toad or while compiling in reports.
Can anyone please assist what is wrong with my query.
Actual Query:
Select
wnd.delivery_id
,nvl(wdd.ship_to_contact_id,-999) ship_to_contact_id
,oola.line_id so_line_id
,msi.inventory_item_id
,oola.header_id so_header_id
,wdd.delivery_detail_id
,wdd.attribute4 pallet_no
,to_number(wdd.attribute1) num_of_cartons
,msi.segment1
,msi.description
,msi.primary_uom_code UM
,msi.concatenated_segments
,oola.user_item_description user_desc
,wdd.requested_quantity qty
,ooha.cust_po_number customer_po
,ooha.order_number so_num
,oola.line_number so_line_num
,ooha.order_number so_num
,oola.line_number so_line_num
,hca.cust_account_id                         bill_to_cust_acc_id
,hcasa.cust_acct_site_id                 bill_to_cust_acc_site
,xsf_haou.attribute7                         cust_item_ref
,(select packing_instructions
     from   oe_order_lines_all
     where line_id = oola.line_id
     and    packing_instructions is not null
     and rownum < 2) line_level_ins
,(select attribute10
          from wsh_delivery_details
         where delivery_detail_id = wdd.delivery_detail_id
           and attribute10 is not null
           and rownum < 2) dimension1
,(select ftt.territory_short_name
                           from wsh_delivery_details w,
                               fnd_territories_tl ftt
                         where w.delivery_detail_id=wdd.delivery_detail_id
                           and ftt.territory_code = w.attribute11
                           and w.attribute11 is not null
                           and ftt.language = 'US'
                           and rownum < 2) country1
from
oe_order_headers_all ooha
,oe_order_lines_all oola
,mtl_system_items_kfv msi
,wsh_delivery_details wdd
,wsh_delivery_assignments wda
,wsh_new_deliveries wnd
,hz_cust_site_uses_all                   hcsua
, hz_cust_acct_sites_all                  hcasa
, hz_cust_accounts                         hca
, hr_all_organization_units                sf_haou
,xx_addl_attribute_info                 xsf_haou
where wnd.delivery_id= wda.delivery_id
and wnd.delivery_id = :p_delivery_id
and wda.delivery_detail_id = wdd.delivery_detail_id
and wdd.source_code='OE'
and wdd.source_line_id= oola.line_id
and oola.header_id= ooha.header_id
and oola.inventory_item_id= msi.inventory_item_id
and oola.ship_from_org_id= msi.organization_id
and nvl(msi.inventory_item_flag,'Y')<>'N'
and hcsua.site_use_id =oola.invoice_to_org_id
and hcsua.cust_acct_site_id = hcasa.cust_acct_site_id
and hcasa.cust_account_id= hca.cust_account_id
and oola.org_id= sf_haou.organization_id
and sf_haou.organization_id = xsf_haou.pk_value_1(+)
and sf_haou.attribute_category = xsf_haou.attribute_category(+)
Modified Query
Select
wnd.delivery_id
,nvl(wdd.ship_to_contact_id,-999) ship_to_contact_id
,oola.line_id so_line_id
,msi.inventory_item_id
,oola.header_id so_header_id
,wdd.delivery_detail_id
,wdd.attribute4 pallet_no
,to_number(wdd.attribute1) num_of_cartons
,msi.segment1
,msi.description
,msi.primary_uom_code UM
,msi.concatenated_segments
,oola.user_item_description user_desc
,wdd.requested_quantity qty
,ooha.cust_po_number customer_po
,ooha.order_number so_num
,(oola.line_number||'.'||oola.shipment_number||'.'||oola.option_number||'.'||oola.component_number) so_line_num
,ooha.order_number so_num
,oola.line_number so_line_num
,hca.cust_account_id                         bill_to_cust_acc_id
,hcasa.cust_acct_site_id                 bill_to_cust_acc_site
,xsf_haou.attribute7                         cust_item_ref
,(select packing_instructions
     from   oe_order_lines_all
     where line_id = oola.line_id
     and    packing_instructions is not null
     and rownum < 2) line_level_ins
,(select attribute10
          from wsh_delivery_details
         where delivery_detail_id = wdd.delivery_detail_id
           and attribute10 is not null
           and rownum < 2) dimension1
,(select ftt.territory_short_name
                           from wsh_delivery_details w,
                               fnd_territories_tl ftt
                         where w.delivery_detail_id=wdd.delivery_detail_id
                           and ftt.territory_code = w.attribute11
                           and w.attribute11 is not null
                           and ftt.language = 'US'
                           and rownum < 2) country1
from
oe_order_headers_all ooha
,oe_order_lines_all oola
,mtl_system_items_kfv msi
,wsh_delivery_details wdd
,wsh_delivery_assignments wda
,wsh_new_deliveries wnd
,hz_cust_site_uses_all                   hcsua
, hz_cust_acct_sites_all                  hcasa
, hz_cust_accounts                         hca
, hr_all_organization_units                sf_haou
,xx_addl_attribute_info                 xsf_haou
where wnd.delivery_id= wda.delivery_id
and wnd.delivery_id = :p_delivery_id
and wda.delivery_detail_id = wdd.delivery_detail_id
and wdd.source_code='OE'
and wdd.source_line_id= oola.line_id
--and oola.line_id = wdd.source_line_id(+)
--and oola.item_type_code IN ('OPTION','STANDARD')
and oola.header_id= ooha.header_id
and oola.inventory_item_id= msi.inventory_item_id
and oola.ship_from_org_id= msi.organization_id
and nvl(msi.inventory_item_flag,'Y')<>'N'
and hcsua.site_use_id =oola.invoice_to_org_id
and hcsua.cust_acct_site_id = hcasa.cust_acct_site_id
and hcasa.cust_account_id= hca.cust_account_id
and oola.org_id= sf_haou.organization_id
and sf_haou.organization_id = xsf_haou.pk_value_1(+)
and sf_haou.attribute_category = xsf_haou.attribute_category(+)
UNION
Select
wnd.delivery_id
,-999
,oola.line_id so_line_id
,msi.inventory_item_id
,oola.header_id so_header_id
,null
,null
,null
,msi.segment1
,msi.description
,msi.primary_uom_code UM
,msi.concatenated_segments
,oola.user_item_description user_desc
,oola.ordered_quantity qty
,ooha.cust_po_number customer_po
,ooha.order_number so_num
,(oola.line_number||'.'||oola.shipment_number||'.'||oola.option_number||'.'||oola.component_number) so_line_num
,ooha.order_number so_num
,oola.line_number so_line_num
,hca.cust_account_id                         bill_to_cust_acc_id
,hcasa.cust_acct_site_id                 bill_to_cust_acc_site
,xsf_haou.attribute7                         cust_item_ref
,(select packing_instructions
     from   oe_order_lines_all
     where line_id = oola.line_id
     and    packing_instructions is not null
     and rownum < 2) line_level_ins
,NULL
,NULL
from
oe_order_headers_all ooha
,oe_order_lines_all oola
,mtl_system_items_kfv msi
,wsh_new_deliveries wnd
,hz_cust_site_uses_all                   hcsua
, hz_cust_acct_sites_all                  hcasa
, hz_cust_accounts                         hca
, hr_all_organization_units                sf_haou
,xx_addl_attribute_info                 xsf_haou
where wnd.delivery_id = :p_delivery_id
and oola.item_type_code IN ('OPTION','STANDARD')
and wnd.source_header_id= ooha.header_id
and ooha.header_id=oola.header_id
and oola.inventory_item_id= msi.inventory_item_id
and oola.ship_from_org_id= msi.organization_id
and nvl(msi.inventory_item_flag,'N')='N'
and hcsua.site_use_id =oola.invoice_to_org_id
and hcsua.cust_acct_site_id = hcasa.cust_acct_site_id
and hcasa.cust_account_id= hca.cust_account_id
and oola.org_id= sf_haou.organization_id
and sf_haou.organization_id = xsf_haou.pk_value_1(+)
and sf_haou.attribute_category = xsf_haou.attribute_category(+)
and EXISTS
(SELECT 1
FROM   wsh_new_deliveries wnd
,      wsh_delivery_assignments wda
,      wsh_delivery_details wdd
,      oe_order_lines_all   ool
WHERE wnd.delivery_id = wda.delivery_id
AND wda.delivery_detail_id= wdd.delivery_detail_id
AND wdd.source_line_id = ool.line_id
AND wnd.delivery_id = :p_delivery_id
AND ool.top_model_line_id = oola.top_model_line_id)

Hi Avs,
Ive got same error installing subj. on 32 bit linux, and I found, that this is somthing to do with 32bit version of grid, since 64 version on same hardware, worked as it should be.
from here
HTH,
Ed

DBconsole is terminated with signal 99 from time to time in 10g RAC!!

Hi, all.
The database is 2 node RAC 10.2.0.2.0 on 32-bit Windows 2003 EE SP1.
We are not using Grid Control. I installed Enterprise Manager by using
DBCA.
From time to time, Console and agent processes are restarted "automatically".
--> emdb.nohup
----- Tue Oct 16 00:04:43 2007::Console Launched with PID 4384 at time Tue Oct 16 00:04:43 2007 -----
----- Mon Oct 22 23:08:50 2007::Process with pid 4384 not found. Checking for file D:\oracle\product\10.2.0\db_1\nmsp110_RAC1/sysman/log/exitStatus_dbconsole -----
----- Mon Oct 22 23:08:50 2007::Exitfile D:\oracle\product\10.2.0\db_1\nmsp110_RAC1/sysman/log/exitStatus_dbconsole not found. Signaling abnormal exit -----
----- Mon Oct 22 23:08:51 2007::DBConsole exited at Mon Oct 22 23:08:51 2007 with signal 99 -----
----- Mon Oct 22 23:08:51 2007::DBConsole has exited due to an internal error -----
----- Mon Oct 22 23:08:51 2007:: - checking for corefile at D:\oracle\product\10.2.0\db_1\nmsp110_RAC1/sysman/emd -----
----- Mon Oct 22 23:08:51 2007::Restarting DBConsole. -----
launchprocess::Launching process : D:\oracle\product\10.2.0\db_1\jdk/bin/java -server -Xmx256M -XX:MaxPermSize=96m -XX:MinHeapFreeRatio=20 -XX:MaxHeapFreeRatio=40 -DORACLE_HOME=D:\oracle\product\10.2.0\db_1 -Doracle.home=D:\oracle\product\10.2.0\db_1/oc4j -Doracle.oc4j.localhome=D:\oracle\product\10.2.0\db_1\nmsp110_RAC1/sysman -DEMSTATE=D:\oracle\product\10.2.0\db_1\nmsp110_RAC1 -Doracle.j2ee.dont.use.memory.archive=true -Djava.protocol.handler.pkgs=HTTPClient -Doracle.security.jazn.config=D:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_nmsp110_RAC1/config/jazn.xml -Djava.security.policy=D:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_nmsp110_RAC1/config/java2.policy -Djava.security.properties=D:\oracle\product\10.2.0\db_1/oc4j/j2ee/home/config/jazn.security.props -DEMDROOT=D:\oracle\product\10.2.0\db_1\nmsp110_RAC1 -Dsysman.md5password=true -Drepapi.oracle.home=D:\oracle\product\10.2.0\db_1 -Ddisable.checkForUpdate=true -Djava.awt.headless=true -jar D:\oracle\product\10.2.0\db_1/oc4j/j2ee/home/oc4j.jar -config D:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_nmsp110_RAC1/config/server.xml
launchprocess::Launched process successfuly. Process Id is : 4444
----- Mon Oct 22 23:08:51 2007::Console Launched with PID 4444 at time Mon Oct 22 23:08:51 2007 -----
As a result, some enterprise manager sessions become pending with library cache
lock or gc cr request wait event.
How can I respond to this problem??
Thanks and Regards.
Message was edited by:
user507290
Message was edited by:
user507290

Dear DBMS_Direct.
Thanks for your reply.
There are errors in emagent.trc and emoms.trc.
But I do not know what they mean.
There are several log files in sysman log dictory.
1. emoms.trc
2. emoms.log
3. emagent.trc
4. emagent.log
5. emdb.nohup
6. emdctl.trc
7. emagent_perl.trc
What processes are writing log to these files and what do they mean?
Thanks and Regards.

Autofsd: /usr/sbin/automount terminated with signal Abort trap: 6

This is 100% recreatable. All I have to do is type:
sudo automount -vc
or plug in a USB drive.
4/11/12 8:09:32.959 AM com.apple.autofsd: Assertion failed: (strlcat((mntops_out), (","), (optlen)) < (optlen)), function process_fstab_mntopts, file /SourceCache/autofs/autofs-207.1/automountlib/ns_fstab.c, line 171.
4/11/12 8:09:33.016 AM ReportCrash: DebugSymbols was unable to start a spotlight query: spotlight is not responding or disabled.
4/11/12 8:09:33.288 AM autofsd: /usr/sbin/automount terminated with signal Abort trap: 6
4/11/12 8:09:33.345 AM ReportCrash: Saved crash report for automount[65895] version ??? (???) to /Library/Logs/DiagnosticReports/automount_2012-04-11-080933_localhost.crash
I have a bunch of NFS mounts defined in disk_util as well. Not that that should cause it. All mounts "verify" OK.

Process:
automount [65895]
Path:
/usr/sbin/automount
Identifier:
automount
Version:
Code Type:
X86-64 (Native)
Parent Process: autofsd [87]
Date/Time:
2012-04-11 08:09:32.965 -0700
OS Version:
Mac OS X 10.7.3 (11D50)
Report Version: 9
Crashed Thread: 0 Dispatch queue: com.apple.main-thread
Exception Type: EXC_CRASH (SIGABRT)
Exception Codes: 0x0000000000000000, 0x0000000000000000
Application Specific Information:
Assertion failed: (strlcat((mntops_out), (","), (optlen)) < (optlen)), function process_fstab_mntopts, file /SourceCache/autofs/autofs-207.1/automountlib/ns_fstab.c, line 171.
objc[65895]: garbage collection is OFF
Thread 0 Crashed:: Dispatch queue: com.apple.main-thread
0   libsystem_kernel.dylib
0x00007fff8fed7ce2 __pthread_kill + 10
1   libsystem_c.dylib
0x00007fff8a48c7d2 pthread_kill + 95
2   libsystem_c.dylib
0x00007fff8a47da7a abort + 143
3   libsystem_c.dylib
0x00007fff8a4b05de __assert_rtn + 146
4   automount
0x0000000103db2e21 0x103dac000 + 28193
5   automount
0x0000000103db2f22 0x103dac000 + 28450
6   automount
0x0000000103db153a 0x103dac000 + 21818
7   automount
0x0000000103db3468 0x103dac000 + 29800
8   automount
0x0000000103dadd1f 0x103dac000 + 7455
9   automount
0x0000000103dad5d0 0x103dac000 + 5584
Thread 1:
0   libsystem_kernel.dylib
0x00007fff8fed8192 __workq_kernreturn + 10
1   libsystem_c.dylib
0x00007fff8a48c594 _pthread_wqthread + 758
2   libsystem_c.dylib
0x00007fff8a48db85 start_wqthread + 13
Thread 2:: Dispatch queue: com.apple.libdispatch-manager
0   libsystem_kernel.dylib
0x00007fff8fed87e6 kevent + 10
1   libdispatch.dylib
0x00007fff90a795be _dispatch_mgr_invoke + 923
2   libdispatch.dylib
0x00007fff90a7814e _dispatch_mgr_thread + 54
Thread 3:
0   libsystem_kernel.dylib
0x00007fff8fed8192 __workq_kernreturn + 10
1   libsystem_c.dylib
0x00007fff8a48c594 _pthread_wqthread + 758
2   libsystem_c.dylib
0x00007fff8a48db85 start_wqthread + 13
Thread 4:
0   libsystem_kernel.dylib
0x00007fff8fed8192 __workq_kernreturn + 10
1   libsystem_c.dylib
0x00007fff8a48c594 _pthread_wqthread + 758
2   libsystem_c.dylib
0x00007fff8a48db85 start_wqthread + 13
Thread 0 crashed with X86 Thread State (64-bit):
rax: 0x0000000000000000 rbx: 0x0000000000000006 rcx: 0x00007fff639a8dc8 rdx: 0x0000000000000000
rdi: 0x0000000000000303 rsi: 0x0000000000000006 rbp: 0x00007fff639a8df0 rsp: 0x00007fff639a8dc8
   r8: 0x00007fff75bc9fb8   r9: 0x00000000000000ab r10: 0x00007fff8fed7d0a r11: 0xffffff80002d8220
r12: 0x0000000103db59b8 r13: 0x0000000103df9000 r14: 0x00007fff75bcc960 r15: 0x0000000103db59ce
rip: 0x00007fff8fed7ce2 rfl: 0x0000000000000246 cr2: 0x0000000103df9000
Logical CPU: 0
Binary Images:
0x103dac000 -
0x103db6fff automount (??? - ???) <E1A801C7-AA80-30A4-A164-E86E07CF94E8> /usr/sbin/automount
0x7fff639ac000 -
0x7fff639e0baf dyld (195.6 - ???) <0CD1B35B-A28F-32DA-B72E-452EAD609613> /usr/lib/dyld
0x7fff84dc6000 -
0x7fff84df6ff7 com.apple.DictionaryServices (1.2.1 - 158.2) <3FC86118-7553-38F7-8916-B329D2E94476> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Diction aryServices.framework/Versions/A/DictionaryServices
0x7fff85274000 -
0x7fff85275ff7 libsystem_blocks.dylib (53.0.0 - compatibility 1.0.0) <8BCA214A-8992-34B2-A8B9-B74DEACA1869> /usr/lib/system/libsystem_blocks.dylib
0x7fff85276000 -
0x7fff8527cfff com.apple.DiskArbitration (2.4.1 - 2.4.1) <CEA34337-63DE-302E-81AA-10D717E1F699> /System/Library/Frameworks/DiskArbitration.framework/Versions/A/DiskArbitration
0x7fff855e4000 -
0x7fff855e9fff libcompiler_rt.dylib (6.0.0 - compatibility 1.0.0) <98ECD5F6-E85C-32A5-98CD-8911230CB66A> /usr/lib/system/libcompiler_rt.dylib
0x7fff85ac7000 -
0x7fff85b37fff com.apple.datadetectorscore (3.0 - 179.4) <B4C6417F-296C-31C1-BB94-980BFCDC9175> /System/Library/PrivateFrameworks/DataDetectorsCore.framework/Versions/A/DataDe tectorsCore
0x7fff85dad000 -
0x7fff85daeff7 libsystem_sandbox.dylib (??? - ???) <5087ADAD-D34D-3844-9D04-AFF93CED3D92> /usr/lib/system/libsystem_sandbox.dylib
0x7fff85e19000 -
0x7fff85e65ff7 com.apple.SystemConfiguration (1.11.2 - 1.11) <A14F3583-9CC0-397D-A50E-17217075953F> /System/Library/Frameworks/SystemConfiguration.framework/Versions/A/SystemConfi guration
0x7fff87081000 -
0x7fff87183ff7 libxml2.2.dylib (10.3.0 - compatibility 10.0.0) <D46F371D-6422-31B7-BCE0-D80713069E0E> /usr/lib/libxml2.2.dylib
0x7fff87184000 -
0x7fff871c3fff com.apple.AE (527.7 - 527.7) <B82F7ABC-AC8B-3507-B029-969DD5CA813D> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/AE.fram ework/Versions/A/AE
0x7fff871c4000 -
0x7fff873c6fff libicucore.A.dylib (46.1.0 - compatibility 1.0.0) <38CD6ED3-C8E4-3CCD-89AC-9C3198803101> /usr/lib/libicucore.A.dylib
0x7fff873e3000 -
0x7fff873e7fff libutil.dylib (??? - ???) <28672328-B738-38CE-B231-8A93CA6E6EA4> /usr/lib/libutil.dylib
0x7fff873e8000 -
0x7fff873eafff com.apple.TrustEvaluationAgent (2.0 - 1) <1F31CAFF-C1C6-33D3-94E9-11B721761DDF> /System/Library/PrivateFrameworks/TrustEvaluationAgent.framework/Versions/A/Tru stEvaluationAgent
0x7fff876bd000 -
0x7fff876f8fff libsystem_info.dylib (??? - ???) <35F90252-2AE1-32C5-8D34-782C614D9639> /usr/lib/system/libsystem_info.dylib
0x7fff87764000 -
0x7fff8778fff7 libxslt.1.dylib (3.24.0 - compatibility 3.0.0) <8051A3FC-7385-3EA9-9634-78FC616C3E94> /usr/lib/libxslt.1.dylib
0x7fff87811000 -
0x7fff8781ffff com.apple.NetAuth (1.0 - 3.0) <F384FFFD-70F6-3B1C-A886-F5B446E456E7> /System/Library/PrivateFrameworks/NetAuth.framework/Versions/A/NetAuth
0x7fff87881000 -
0x7fff878f6ff7 libc++.1.dylib (19.0.0 - compatibility 1.0.0) <C0EFFF1B-0FEB-3F99-BE54-506B35B555A9> /usr/lib/libc++.1.dylib
0x7fff87ba5000 -
0x7fff87bb7ff7 libz.1.dylib (1.2.5 - compatibility 1.0.0) <30CBEF15-4978-3DED-8629-7109880A19D4> /usr/lib/libz.1.dylib
0x7fff87f7e000 -
0x7fff87f7ffff libunc.dylib (24.0.0 - compatibility 1.0.0) <C67B3B14-866C-314F-87FF-8025BEC2CAAC> /usr/lib/system/libunc.dylib
0x7fff88122000 -
0x7fff88127fff libcache.dylib (47.0.0 - compatibility 1.0.0) <B7757E2E-5A7D-362E-AB71-785FE79E1527> /usr/lib/system/libcache.dylib
0x7fff88128000 -
0x7fff8812eff7 libunwind.dylib (30.0.0 - compatibility 1.0.0) <1E9C6C8C-CBE8-3F4B-A5B5-E03E3AB53231> /usr/lib/system/libunwind.dylib
0x7fff8816e000 -
0x7fff88176fff libsystem_dnssd.dylib (??? - ???) <7749128E-D0C5-3832-861C-BC9913F774FA> /usr/lib/system/libsystem_dnssd.dylib
0x7fff88303000 -
0x7fff8830dff7 liblaunch.dylib (392.18.0 - compatibility 1.0.0) <39EF04F2-7F0C-3435-B785-BF283727FFBD> /usr/lib/system/liblaunch.dylib
0x7fff8830e000 -
0x7fff88313fff com.apple.OpenDirectory (10.7 - 146) <91A87249-6A2F-3F89-A8DE-0E95C0B54A3A> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/OpenDirectory
0x7fff8848a000 -
0x7fff88493ff7 libsystem_notify.dylib (80.1.0 - compatibility 1.0.0) <A4D651E3-D1C6-3934-AD49-7A104FD14596> /usr/lib/system/libsystem_notify.dylib
0x7fff8851a000 -
0x7fff88521fff libcopyfile.dylib (85.1.0 - compatibility 1.0.0) <172B1985-F24A-34E9-8D8B-A2403C9A0399> /usr/lib/system/libcopyfile.dylib
0x7fff88685000 -
0x7fff887ecff7 com.apple.CFNetwork (520.3.2 - 520.3.2) <516B611D-E53E-3467-9211-3C5B86ABA865> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CFNetwo rk.framework/Versions/A/CFNetwork
0x7fff88f68000 -
0x7fff88f73ff7 libc++abi.dylib (14.0.0 - compatibility 1.0.0) <8FF3D766-D678-36F6-84AC-423C878E6D14> /usr/lib/libc++abi.dylib
0x7fff8932f000 -
0x7fff8964bff7 com.apple.CoreServices.CarbonCore (960.20 - 960.20) <C45CA09E-8867-3D67-BB2E-48D2E6B0D78C> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/CarbonC ore.framework/Versions/A/CarbonCore
0x7fff898e0000 -
0x7fff89ab4fff com.apple.CoreFoundation (6.7.1 - 635.19) <57B77925-9065-38C9-A05B-02F4F9ED007C> /System/Library/Frameworks/CoreFoundation.framework/Versions/A/CoreFoundation
0x7fff89ab5000 -
0x7fff89accfff com.apple.CFOpenDirectory (10.7 - 144) <9709423E-8484-3B26-AAE8-EF58D1B8FB3F> /System/Library/Frameworks/OpenDirectory.framework/Versions/A/Frameworks/CFOpen Directory.framework/Versions/A/CFOpenDirectory
0x7fff89ad1000 -
0x7fff89ad2fff libDiagnosticMessagesClient.dylib (??? - ???) <3DCF577B-F126-302B-BCE2-4DB9A95B8598> /usr/lib/libDiagnosticMessagesClient.dylib
0x7fff89ad3000 -
0x7fff89ad8ff7 libsystem_network.dylib (??? - ???) <5DE7024E-1D2D-34A2-80F4-08326331A75B> /usr/lib/system/libsystem_network.dylib
0x7fff8a26e000 -
0x7fff8a2d8ff7 com.apple.framework.IOKit (2.0 - ???) <EEEB42FD-E3E1-3A94-A771-B1993B694F17> /System/Library/Frameworks/IOKit.framework/Versions/A/IOKit
0x7fff8a3a3000 -
0x7fff8a3bfff7 com.apple.GenerationalStorage (1.0 - 126.1) <509F52ED-E54B-3FEF-B3C2-759387B826E6> /System/Library/PrivateFrameworks/GenerationalStorage.framework/Versions/A/Gene rationalStorage
0x7fff8a43c000 -
0x7fff8a519fef libsystem_c.dylib (763.12.0 - compatibility 1.0.0) <FF69F06E-0904-3C08-A5EF-536FAFFFDC22> /usr/lib/system/libsystem_c.dylib
0x7fff8a56f000 -
0x7fff8a573fff libmathCommon.A.dylib (2026.0.0 - compatibility 1.0.0) <FF83AFF7-42B2-306E-90AF-D539C51A4542> /usr/lib/system/libmathCommon.A.dylib
0x7fff8a96c000 -
0x7fff8a972fff libmacho.dylib (800.0.0 - compatibility 1.0.0) <D86F63EC-D2BD-32E0-8955-08B5EAFAD2CC> /usr/lib/system/libmacho.dylib
0x7fff8a9b6000 -
0x7fff8accfff7 com.apple.Foundation (6.7.1 - 833.24) <6D4E6F93-64EF-3D41-AE80-2BB10E2E6323> /System/Library/Frameworks/Foundation.framework/Versions/C/Foundation
0x7fff8afb7000 -
0x7fff8afc4ff7 libbz2.1.0.dylib (1.0.5 - compatibility 1.0.0) <8EDE3492-D916-37B2-A066-3E0F054411FD> /usr/lib/libbz2.1.0.dylib
0x7fff8b08c000 -
0x7fff8b0b9fe7 libSystem.B.dylib (159.1.0 - compatibility 1.0.0) <095FDD3C-3961-3865-A59B-A5B0A4B8B923> /usr/lib/libSystem.B.dylib
0x7fff8b0ba000 -
0x7fff8b19cfff com.apple.CoreServices.OSServices (478.37 - 478.37) <1DAC695E-0D0F-3AE2-974F-A173E69E67CC> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/OSServi ces.framework/Versions/A/OSServices
0x7fff8b2f7000 -
0x7fff8b2f9fff libquarantine.dylib (36.2.0 - compatibility 1.0.0) <48656562-FF20-3B55-9F93-407ACA7341C0> /usr/lib/system/libquarantine.dylib
0x7fff8bf17000 -
0x7fff8c023fff libcrypto.0.9.8.dylib (44.0.0 - compatibility 0.9.8) <3A8E1F89-5E26-3C8B-B538-81F5D61DBF8A> /usr/lib/libcrypto.0.9.8.dylib
0x7fff8c572000 -
0x7fff8c572fff libkeymgr.dylib (23.0.0 - compatibility 1.0.0) <61EFED6A-A407-301E-B454-CD18314F0075> /usr/lib/system/libkeymgr.dylib
0x7fff8c7b8000 -
0x7fff8ca9afff com.apple.security (7.0 - 55110) <252F9E04-FF8A-3EA7-A38E-51DD0653663C> /System/Library/Frameworks/Security.framework/Versions/A/Security
0x7fff8d102000 -
0x7fff8d107fff libpam.2.dylib (3.0.0 - compatibility 3.0.0) <D952F17B-200A-3A23-B9B2-7C1F7AC19189> /usr/lib/libpam.2.dylib
0x7fff8d296000 -
0x7fff8d39dfe7 libsqlite3.dylib (9.6.0 - compatibility 9.0.0) <EE02BB01-64C9-304D-9719-A35F5CD6D04C> /usr/lib/libsqlite3.dylib
0x7fff8d39e000 -
0x7fff8d39ffff libdnsinfo.dylib (395.6.0 - compatibility 1.0.0) <718A135F-6349-354A-85D5-430B128EFD57> /usr/lib/system/libdnsinfo.dylib
0x7fff8f019000 -
0x7fff8f0b9fff com.apple.LaunchServices (480.27.1 - 480.27.1) <4DC96C1E-6FDE-305E-9718-E4C5C1341F56> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchS ervices.framework/Versions/A/LaunchServices
0x7fff8f36a000 -
0x7fff8f371fff com.apple.NetFS (4.0 - 4.0) <B9F41443-679A-31AD-B0EB-36557DAF782B> /System/Library/Frameworks/NetFS.framework/Versions/A/NetFS
0x7fff8f3e5000 -
0x7fff8f427ff7 libcommonCrypto.dylib (55010.0.0 - compatibility 1.0.0) <A5B9778E-11C3-3F61-B740-1F2114E967FB> /usr/lib/system/libcommonCrypto.dylib
0x7fff8febf000 -
0x7fff8fec0ff7 libremovefile.dylib (21.1.0 - compatibility 1.0.0) <739E6C83-AA52-3C6C-A680-B37FE2888A04> /usr/lib/system/libremovefile.dylib
0x7fff8fec1000 -
0x7fff8fee1fff libsystem_kernel.dylib (1699.22.73 - compatibility 1.0.0) <69F2F501-72D8-3B3B-8357-F4418B3E1348> /usr/lib/system/libsystem_kernel.dylib
0x7fff8fee2000 -
0x7fff8fefffff libxpc.dylib (77.18.0 - compatibility 1.0.0) <26C05F31-E809-3B47-AF42-1460971E3AC3> /usr/lib/system/libxpc.dylib
0x7fff8ff6e000 -
0x7fff8ffbcfff libauto.dylib (??? - ???) <D8AC8458-DDD0-3939-8B96-B6CED81613EF> /usr/lib/libauto.dylib
0x7fff8ffbe000 -
0x7fff8ffcdff7 libxar-nossl.dylib (??? - ???) <A6ABBFB9-E4ED-38AD-BBBB-F9958B9CEFB5> /usr/lib/libxar-nossl.dylib
0x7fff90321000 -
0x7fff903a4fef com.apple.Metadata (10.7.0 - 627.28) <1C14033A-69C9-3757-B24D-5583AEAC2CBA> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/Metadat a.framework/Versions/A/Metadata
0x7fff9046a000 -
0x7fff9047cff7 libbsm.0.dylib (??? - ???) <349BB16F-75FA-363F-8D98-7A9C3FA90A0D> /usr/lib/libbsm.0.dylib
0x7fff904ea000 -
0x7fff904fdff7 libCRFSuite.dylib (??? - ???) <034D4DAA-63F0-35E4-BCEF-338DD7A453DD> /usr/lib/libCRFSuite.dylib
0x7fff904fe000 -
0x7fff90502fff libdyld.dylib (195.5.0 - compatibility 1.0.0) <F1903B7A-D3FF-3390-909A-B24E09BAD1A5> /usr/lib/system/libdyld.dylib
0x7fff90503000 -
0x7fff9059dff7 com.apple.SearchKit (1.4.0 - 1.4.0) <4E70C394-773E-3A4B-A93C-59A88ABA9509> /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/SearchK it.framework/Versions/A/SearchKit
0x7fff90a76000 -
0x7fff90a84fff libdispatch.dylib (187.7.0 - compatibility 1.0.0) <712AAEAC-AD90-37F7-B71F-293FF8AE8723> /usr/lib/system/libdispatch.dylib
0x7fff90c54000 -
0x7fff90cc7fff libstdc++.6.dylib (52.0.0 - compatibility 7.0.0) <6BDD43E4-A4B1-379E-9ED5-8C713653DFF2> /usr/lib/libstdc++.6.dylib
0x7fff90dbc000 -
0x7fff90dbcfff com.apple.CoreServices (53 - 53) <043C8026-8EDD-3241-B090-F589E24062EF> /System/Library/Frameworks/CoreServices.framework/Versions/A/CoreServices
0x7fff90df9000 -
0x7fff90e07ff7 libkxld.dylib (??? - ???) <65BE345D-6618-3D1A-9E2B-255E629646AA> /usr/lib/system/libkxld.dylib
0x7fff91731000 -
0x7fff91732fff liblangid.dylib (??? - ???) <CACBE3C3-2F7B-3EED-B50E-EDB73F473B77> /usr/lib/liblangid.dylib
0x7fff91807000 -
0x7fff918ebe5f libobjc.A.dylib (228.0.0 - compatibility 1.0.0) <871E688B-CF57-3BC7-80D6-F6476DFF109B> /usr/lib/libobjc.A.dylib
External Modification Summary:
Calls made by other processes targeting this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by this process:
task_for_pid: 0
thread_create: 0
thread_set_state: 0
Calls made by all processes on this machine:
task_for_pid: 10774
thread_create: 0
thread_set_state: 0
VM Region Summary:
ReadOnly portion of Libraries: Total=74.9M resident=45.1M(60%) swapped_out_or_unallocated=29.9M(40%)
Writable regions: Total=69.6M written=500K(1%) resident=812K(1%) swapped_out=0K(0%) unallocated=68.9M(99%)
REGION TYPE
VIRTUAL
===========
=======
MALLOC
59.3M
MALLOC guard page
32K
STACK GUARD
56.0M
Stack
10.0M
VM_ALLOCATE
40K
__DATA
2964K
__LINKEDIT
47.6M
__TEXT
27.3M
__UNICODE
544K
shared memory
12K
===========
=======
TOTAL
203.9M

Force Sensor with Signal Conditioner to NI 6009 DAQ

Similar Messages

Maybe you are looking for