Foreign currency conversion not picking up rate or time period

I am running the standard FX conversion (standard stored procedure - fxtrans.lgx) on SAP BPC MS version 7.5 , but everytime I run the package, even though I choose a particular day, it seems to run for multiple time periods.
In the formula log I get more than 50 of the following:
10000400 - 4 rows calculated
10000400 - 0 rows updated
10000400 is the TIMEID for my currency conversion.
Also, when I look at the result, even though I have entered 1 as my conversion fator I get a multiple of 18. I tried to change the conversion factor, but no matter what I do for no matter what entity and no matter what LC I always end up with a multiple of 18.
Any ideas for me?
Thanks

Hi,
This sounds strange. Can you post your script logic file and a small extract from your time dimension please?
Tom.

Similar Messages

Currency conversion not working for foreign entity

I am having an issue with currency conversion not generating the correct values for foreign entities. For entities where the currency is USD, I am able to see the LC amount being written to USD. However, for entites that have currencies other than USD, I just see zeros. I have double-checked to make sure that rates exist for the given currencies. Below is the logic script I am using which is a modificatio nof the multicurrency.lgl. Any help would be greatly appreciated.
// filter the appropriate currencies and rates
*SELECT(%REPORTING_CURRENCIES%, "[ID]", "RptCurrency", "[REPORTING] = 'Y'")
*SELECT(%FX_RATES%,"[ID]","RATE","[GROUP]='FX RATE'")
// set the appropriate region to clear
//(all reporting currencies)
*CLEAR_DESTINATION
*DESTINATION RPTCURRENCY=%REPORTING_CURRENCIES%
// load the rates from the RATE cube
*LOOKUP RATE
*DIM RATESRC="RATECALC"
*DIM Rate=ARFIELD.RATETYPE
*DIM SOURCECURR: INPUTCURRENCY=LOC_MILLOTH.CURRENCY
*FOR %CURR%=%REPORTING_CURRENCIES%
*DIM %CURR%:INPUTCURRENCY="%CURR%"
*NEXT
*ENDLOOKUP
// define the translation rule
*WHEN ARFIELD.RATETYPE
*IS "NOTRANS"
// translate
*IS %FX_RATES%
       *FOR %CURR%=%REPORTING_CURRENCIES%
           *REC(FACTOR=LOOKUP(SOURCECURR)/LOOKUP(%CURR%),RptCurrency="%CURR%")
       *NEXT
*ELSE
       *FOR %CURR%=%REPORTING_CURRENCIES%
           *REC(RptCurrency="%CURR%")
       *NEXT
*ENDWHEN
*FOR %CURR%=%REPORTING_CURRENCIES%
         [RptCurrency].[#%CURR%]=null
*NEXT
*COMMIT
Regards,
Karen

Hi Karen,
I'm no script logic expert so I won't comment on your code. If it's working for USD then the code is probably fine.
There are a few other things you could check (these are based on investigation using the standard multicurrency script). They should line up with the standard Finance application from AppSet
In the InputCurrency dimension for the currencies you want to convert into :
   Check property Reporting is equal to "Y"
   Check property Group is set to "Report"
   Check propoerty MD has a value of "M" or "D"
In the RptCurrency dimension you need to have entries for the the currencies you want to convert into (AppSet only has USD and EUR to start). Also for each of the currencies :
   Check property Reporting is equal to "Y"
   Check property Group is equal to "Report"
   Check property Transfer is equal to "Y"
I'm not convinced that the Transfer value is required but from my testing if you get the above set up and use the standard multicurrency script it will work.
The testing I did was translating into USD, EUR, GBP, CHF, AUD etc
Hope this helps.
Thanks.
Bradley Newcombe.
Edited by: Bradley Newcombe on Apr 28, 2009 1:30 PM

Process 000004 did not confirm within the permitted time period

Hi
The process chain failed while activating the ODS with an error message :Process 000004 did not confirm within the permitted time period" . When repeated the failed step it went successufull. but want to know what can be the cause and steps to be taken in order to avoide this issue further.
Thanks
Ratan

Hi,
Whenever ODS activation goes there'll be some batch processes you can say as parallel processes running along with main job. Due to unavailability of resources i.e either bkgd or dialog processes soemtimes gets delayed and they gets canceled which leads to the failure of main ODS activation job...
may be in ur scenario the same thing might have happened, so when you had repeated the step if the resources are free it will be successful.
once chk in your system for canceled jobs, ther might be some job which relates to your process.
rgds,

Currency Conversion not working

Hi All,
Currency conversion is failing with error message as below.
SAP DBTech JDBC: [2048]: column store error: search table error: [2620] executor: plan operation failed;currency/unit conversion error,Conversion( "AMOUNT" ), row 0: could not determine valid conversion rate for value(s) 3750 from unit 'USD' to unit 'INR' on date 2013-11-15 00:00:00.0000000
For currency conversion, I've done
Assign Client for currency conversion.
Assign Schema which holds all TCUR* tables and set the same as default schema for the model in Semantics section.
In TCURR table, I've below set of records for USD to INR conversion, exchange type used in Currency Conversion is 'M'.
I tried different exchange rates and converting to different currencies. Target currency is fed by Input Parameter which is defined of Semantic Type - Currency.
Even conversion fails for fixed target currency.
Am I missing something? Please provide your inputs.
Regards,
Chandra.

Hi Chandra,
Can you share the screen of your calculated measure showing the currency conversion.
Can you check with date 30.11.2011 and see if the conversion is taking place? Assuming that client and schema details are fine.
Regards,
Krishna Tangudu

F.05 Foreign Currency valuation not posted automaticall to GL account.

Hi,
When we are running F.05 the GL account 3170700 u2013 Gds Recd not Invoiced GRAN is not posting automatically.
Though the GL account is matained in TO30H table and included in the variant that using for F.05 run.
Kindly help me to understand what would be the root cause for not posting automatically.
Thanks,
Hari.

Hi,
If you have a G/L account which have open item management feature, system calculate valuation for each open line items.
For example 2000100 G/L account has open item management and their line items like below.
My local currency is TRY and I posted all items in EUR after that I valuating this line items.
A. line items
Doc Currency Amount : 1.000.000,00 EUR
Posting date exchange rate : 2,00000 (EUR/TRY)
Posting date local currency amount : 2.000.000,00 TRY
End-of-month exhange rate : 2,50000 (EUR/TRY)
Difference : 500.000,00 TRY
B. line items
Doc Currency Amount : 2.000.000,00 EUR
Posting date exchange rate : 2,20000 (EUR/TRY)
Posting date local currency amount : 4.400.000,00 TRY
End-of-month exhange rate : 2,50000 (EUR/TRY)
Difference : 600.000,00 TRY
System calculate and post valuation for each line items and system using balance sheet adjustment account for posting. If you manage your account (like 200100) with open item, you couldn't post valuation on this account. System using balance sheet adjustment account and loss/gain account for posting. You can customizing this steps via OBA1 (then choose KDF).
In same account, If you don't manage with open item, system valuating the balance. In this example 3000101001 account has 3.000.000,00 EUR balance amount. When you execute F.05 with option "Valuate G/L account Balances" you can see only one line items for each account and their currency on F.05 output.
A. line items
Total Foreign Currency Amount : 3.000.000,00 EUR
Total Local currency amount : 6.400.000,00 TRY
End-of-month exhange rate : 2,50000 (EUR/TRY)
Difference : 1.100.000,00 TRY
Then when you post the valuation document, system using 200100 account and loss/gain account for posting
Thanks,
Raviteja

Foreign currency conversion is wrong in line item report

Hi All,
I have a system which went live recently as of 1st of Sept. 2011. Hence my cut off is 31st Aug.2011.
Now, i have uploaded customer open line items in foreign currency. Hence, at cutover my exchange rate was as per month of Aug. Now when I want to post an incoming payment through f-28 I see a different amount in my local currency i.e INR. The difference is exactly the difference due to change of exchange rate. However, my question is once when a document is posted then why does the system shows the amount in INR as per the next month's i.e sept's exchange rate?
Can anybody help me on this please?
Thanks
Priyanka.

Priyanka,
The system is behaving exactly according to accounting principles. For foreign currency transactions, the exchange rate for translation into local currency should be at the rate on which the business transaction occurs. Now, you have converted your open items from the old system into your new system as of Aug. 31. The customer has made the payment (in foreign currency) today. So it is appropriate from an accounting standpoint to take today's rate to convert the foreign curr amnt into INR. The resulting difference is your realized exchange rate difference. You need to book that difference to an exch. rate gain/loss account (that you need to configure in OB09).
Edited by: Srikanth Tamma on Sep 9, 2011 9:37 AM: Sorry, I misspelt your name earlier.

Foreign Currency Valuation not posted to GL account

Hi,
While I run foreign currency valuation even tick on check box of Create Posting button under FAGL_FC_VAL it show me summary report and posting tab it show me properly Debit/Credit entry on last day of month and 1st of month it become reverse as usual. But while I go through respective GL account of "Forex Unrealised Profit" and " Foreign Exchange Adjustment" account in FBL3N it does not show me line ietms result after running foreign curreny valuation. It should show the result in respective GL accounts where line items are tick in each GL accounts and valuation method I use EVR(always valuate). Why it is happening ?
Best Regards,
Anindita

Hi,
After executing FAGL_FC_VAL, do you execute Batch Input Session in SM35. If no then
When you execute FAGL_FC_VAL you will find the field called Batch Input Session name where you have to give a name for e.g. FOREXVAL. Once you execute it then system creates Batch Input Session in SM35. So go to SM35 and select the session FOREXVAL and click on Process icon seen on the top and select Display errors only and press ok.
Regards,
Chintan Joshi.

Foreign currency invoice not shown in local currency

Dear Experts ,
Can you please help me to resole
In my company code currency is INR and my foreign currency is USD , when i posted a invoice in foreign currency it shows in print preview only in foreign currency that is USD but i want to see the local currency INR also for that invoice when in view in VF03
please tell me how to do this
Thanks in Advance
Bhaskar

Hi,
Make sure that in VF03 the document is displaying as per your criteria.
Else you need to add layout of local currency value from layout design.
better you check the table that the correct value is generating ( I mean the local currency information is updating or not)
Regards,
Sanju M S

Foreign currency valuation program picking when there is no postings

Hi experts,
While doing the foreign currency revaluation through facl_fc_val, system throwing the Gl errors "posting for general ledger accout gl.155010 amount 7.58 set in batch input" while checking the gl account through fs10n there is no foreign currency posting for the particular month. How the system taking foreign currency valuation program for the particular month. We checked the error message which showing the tax error, we removed the tax indicator in the gl master system not throwing the error, but the client dont want to remove the tax indicator. Can you give your valuable solution.
J.Francis

yes

Currency conversion based on budget rate

Hi All,
I want to do the currency translation from GBP to EUR,EUR to USD and GBP to USD.there is no table maintained in the BW system.Currency conversion should be based on budget values and they are asked me to do on reporting level.I have gone thru the documents and blogs but not able to follow them.Could you pls share any one knowledge and step by step process.
Thanks

Use RSCUR transaction to create currency translation type.
Here under "Time Ref" tab use "Variable Time Ref" and special infoobject.
You should be able to choose Posting period or posting date here.
Now in query designer maintain the currency conversion based on this currency translation type.
Hope this helps.

Why Does My Calculator 'Currency Conversion' Not Work

Yesterday I updated my Security Software on both of my computers: G4 Powerbook and MiniMac.... Today while using the Apple CALCULATOR, I decided to update the 'currency conversion table' (on my laptop). After clicking the UPDATE button it went through its normal downloading/updating aspect and the usual window popped up that reads, "currencies updated:", except the window was anything but usual.... it was wider than my screen... and it said "currencies updated:" but had nothing listed at all on the visible window, it was blank!
Being that I could not move the window to reveal a close button the only way I could close it was to use the FORCE QUIT. Upon reopening the calculator and making a currency conversion, the currency selection windows are larger than normal and selecting a particular currency has no affect. It doesn't respond at all.
Thinking it was a glitch on my laptop I updated the 'currency conversion' on the MiniMAC and exactly the same thing transpired on it, as well.....
So.....
Can somebody tell me how to fix this so I can use my calculator(s) again?
Is there something wrong with Apple's link to CURRENCY UPDATE that did this or is there something amiss with the new Security Update (2006-008) ?
12 PowerBook G4 Mac OS X (10.4.8) 1.5 GHz PwrPC - 1.25 GB DDR SDRAM

Thanks Rostron .... for at least checking it out on your machine... guess if it happened to you also, it must be a glitch with the Apple Software or update... guess I needed to know that it wasn't both my computers.
Thanks for the Dashboard Widget suggestion. That's what I ended up doing, but I do like the convenience of the regular Calculator as I generally have it already open.
So I guess I'll send info to Apple about this 'BUG' and maybe I should warn everybody to 'NOT' UPDATE THE CURRENCY CONVERSION TABLE lest this predicament may befall them as well!
:LOL:
12 PowerBook G4 Mac OS X (10.4.8) 1.5 GHz PwrPC - 1.25 GB DDR SDRAM

Currency conversion not flowing in the report

Hi,
The currency conversion is showing correct in TCURR table but in the query it is populating wrong.
Can any one advise if I need to do any report relevant changes to make it properly visible in the report.
Thanks,
Lakshmi

Laxmi,
Can you elaborate on this? If you can copy and paste the snapshot of what you are getting in the report, that will help us to understand what you are trying to say.
Thanks,
Hemavardhan.

Upgrading to Photos When Event dates do not fall in the Event time period

I would like to upgrade my IPhoto library to Photos. My Library is organized by Events, and not all photos in a given event is for the same time frame. Example January 2015 Event may contain some pictures from the beginning of February if the event went over to the next month.
Do I have to make all my Events pictures have the same dates as the Event time period? (beach edit)
I noticed that Photos App puts everything in date sequence, so how do I maintain the pictures I want in a certain event?
I would like to organize my library first before upgrading to Photos
Thanks for your Help
Mel

Mel, when you migrate your iPhoto Library to Photos, all your events will be mapped to albums. For each event you currently have, you will find an album in the folder "iPhoto Events" with all photos from that event.
Don't change the dates of your photos, that will just destroy information. Keep creating new albums for set of photos you would previously add to one event.
You may also want to add keywords to photos you want to group in one album. Then you can use smart albums based on keywords.
Photos does not yet support batch changing of titles or captions. Also, you cannot add places in photos.
Before you migrate your library, you may want o do all batch edits for titles and captions, and ensure, that all your photos have places assigned.
-- Léonie

Restarting foreign server, messages not picked up.

Hi,
I have a setup wherein a local weblogic 10 instance attempts to pull messages off a remote weblogic 10 queue, via Spring JMS.
The local weblogic has a JMS module configured with a 'Foreign Destination', via JNDI.
Both the local and the remote weblogic servers are clustered. When the local weblogic is started up, it picks messages normally and hums along. However, if the remote weblogic is restarted, messages remain on the remote weblogic queue and are not consumed.
If the local weblogic is then restarted, messages are consumed as normal.
I can provide more details as needed.
Does anyone have any ideas?
Thank You

Hi,
This question has come up before in this newsgroup. It's usually advantageous to use standard WebLogic JEE MDBs to consume from WebLogic destinations, as MDBs are specifically designed to work well in this use case: for one, they will automatically ensure that all members of a clustered destinations are serviced by consumers. Search this newsgroup for the keyword "Spring" for details.
Tom

Sales contract currency conversion not happening

Hi,
we have sales contract we have maintain all the fx rates in system however when i see condtion system is not calculating the from RUB4 to USD the condtion type is fixed and it's giving the blank value.
for other currencies it's calculating correct.
Regards,
Raman

HI
Check this notes from SAP help.
With a variable time reference, you can choose:
■ Standard InfoObject (standard time characteristic: 0FISCYEAR, 0FISCPER, 0CALYEAR, 0CALQUARTER, 0CALMONTH, 0CALWEEK or 0CALDAY), which is used to determine the time of the translation
■ Special InfoObject. This special InfoObject has to have the same properties as the standard InfoObject or it has to reference the standard InfoObject. The aforementioned notes on using InfoSets also apply here.
Thanks
Raghu

Foreign currency conversion not picking up rate or time period

Similar Messages

Maybe you are looking for