Currency conversion not flowing in the report

Hi,
The currency conversion is showing correct in TCURR table but in the query it is populating wrong.
Can any one advise if I need to do any report relevant changes to make it properly visible in the report.
Thanks,
Lakshmi

Laxmi,
Can you elaborate on this? If you can copy and paste the snapshot of what you are getting in the report, that will help us to understand what you are trying to say.
Thanks,
Hemavardhan.

Similar Messages

  • Currency conversion not working for foreign entity

    I am having an issue with currency conversion not generating the correct values for foreign entities. For entities where the currency is USD, I am able to see the LC amount being written to USD. However, for entites that have currencies other than USD, I just see zeros. I have double-checked to make sure that rates exist for the given currencies. Below is the logic script I am using which is a modificatio nof the multicurrency.lgl. Any help would be greatly appreciated.
    // filter the appropriate currencies and rates
    *SELECT(%REPORTING_CURRENCIES%, "[ID]", "RptCurrency", "[REPORTING] = 'Y'")
    *SELECT(%FX_RATES%,"[ID]","RATE","[GROUP]='FX RATE'")
    // set the appropriate region to clear
    //(all reporting currencies)
    *CLEAR_DESTINATION
    *DESTINATION RPTCURRENCY=%REPORTING_CURRENCIES%
    // load the rates from the RATE cube
    *LOOKUP RATE
    *DIM RATESRC="RATECALC"
    *DIM Rate=ARFIELD.RATETYPE
    *DIM SOURCECURR: INPUTCURRENCY=LOC_MILLOTH.CURRENCY
    *FOR %CURR%=%REPORTING_CURRENCIES%
    *DIM %CURR%:INPUTCURRENCY="%CURR%"
    *NEXT
    *ENDLOOKUP
    // define the translation rule
    *WHEN ARFIELD.RATETYPE
    *IS "NOTRANS"
    // translate
    *IS %FX_RATES%
           *FOR %CURR%=%REPORTING_CURRENCIES%
               *REC(FACTOR=LOOKUP(SOURCECURR)/LOOKUP(%CURR%),RptCurrency="%CURR%")
           *NEXT
    *ELSE
           *FOR %CURR%=%REPORTING_CURRENCIES%
               *REC(RptCurrency="%CURR%")
           *NEXT
    *ENDWHEN
    *FOR %CURR%=%REPORTING_CURRENCIES%
             [RptCurrency].[#%CURR%]=null
    *NEXT
    *COMMIT
    Regards,
    Karen

    Hi Karen,
    I'm no script logic expert so I won't comment on your code. If it's working for USD then the code is probably fine.
    There are a few other things you could check (these are based on investigation using the standard multicurrency script). They should line up with the standard Finance application from AppSet
    In the InputCurrency dimension for the currencies you want to convert into :
       Check property Reporting is equal to "Y"
       Check property Group is set to "Report"
       Check propoerty MD has a value of "M" or "D"
    In the RptCurrency dimension you need to have entries for the the currencies you want to convert into (AppSet only has USD and EUR to start). Also for each of the currencies :
       Check property Reporting is equal to "Y"
       Check property Group is equal to "Report"
       Check property Transfer is equal to "Y"
    I'm not convinced that the Transfer value is required but from my testing if you get the above set up and use the standard multicurrency script it will work.
    The testing I did was translating into USD, EUR, GBP, CHF, AUD etc
    Hope this helps.
    Thanks.
    Bradley Newcombe.
    Edited by: Bradley Newcombe on Apr 28, 2009 1:30 PM

  • Currency conversion not working in web templates after migration to 7.0

    Hi Gurus,
    I am experiencing an interesting issue in BI7. I have my web-template reports build on one or two queries. When I execute the queries from RSRT I have all the amounts properly converted to USD (there is a bex variable defined on the query level with USD as default). However, when executed from web-browser the conversions does not work when the report opens. Now, when I open the "cur. translation" option from KF popup menu and choose the same values I chose on the variable screen - everything works fine.
    Have you experienced similar issue(s)? Please share your experience and kindly avoid pasting links for documentation - these I have already reviewed and it's pointless.
    Thank you, KAT

    Hi Nitin,
    You may wish to take a look at below for few insights -
    OSS notes 328181 and 762951 as a prerequisites.
    Failure to follow the instructions in those notes may probably result in data loss.
    https://websmp207.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700002662832005E
    Re: Delta queus during upgrade
    Assign points if this is helpful.
    Regards,
    Anil

  • Cost Center not flowing in the GL view

    Hi Friends,
    The users have made the entries in the system and defined the Cost centers in the respective fields, while posting the documents. However, when we run the GL Report thru FAGLL03, we notice that the Cost Centers do not get displayed in the Report. On further checking the documents posted we find that the cost centers are maintained in the 'Entry View' but these do not flow to the GL view. This is resulting in the values not getting picked up in the Report Painter Form which is based on the table FAGLFLEXT.  How can we chek and waht needs to be done on the config side to enable the values to be flown in the GL view as well and get maintained in the table FAGLFLEXT.
    Thanks for the Help.
    Regards

    Hi Nikhitha,
    As advised by Guarav earlier, the cost center scenario has been maintained and in the GL Cost center field has also been included. But still the cost center is not displayed in the GL view.
    Is there anything else to be checked in this case.
    Regards,

  • Error Message: "The formula syntax is not supported by the report"

    We are using 'Development Environment: SAP Crystal Reports, version for Visual Studio 2010 u2013 Standard ' and using CrystalDecisions.CrystalReports.Engine and CrystalDecisions.ReportAppServer APIu2019s
    I am reading SQLExpressionFields from one source .rpt file & want to add it to another ReportDocument. While doing so, it gives an error " The formula syntax is not supported by the report"
    doc.ReportClientDocumentDataDefController.FormulaFieldController.Add(formualField); // formualField is SQLExpressionField from source ReportDocument
    But when I tried to Add FormulaField, it succeeds
    Please help me in knowing how to add SQlExpressionFields to ReportDocument.
    Regards,
    -atul

    Thanx Don & Ludek for the reply.
    CR provides support for addition/modification of SQLExpressions.
    CRAXDRT.Application application = new CRAXDRT.ApplicationClass();
    CRAXDRT.Report innerReport = application.OpenReport(path, CROpenReportMethod.crOpenReportByTempCopy);
    innerReport .SQLExpressionFields.Add(name, strSQLExpression)
    CRAXDRT.dll provides support for addition/modification of SQLExpression fields. But its not compatible with 64bit.
    Just curious to know, is there any future plan to provide support for add/modify SQLExpression fields?
    Thanx
    -atul
    Edited by: Atul Chivate on Aug 21, 2011 6:13 PM

  • Lead time values are not appearing in the report for current year.

    Hi friends,
    Iam checking a report in production.  where lead time values are displayed as 0 for 1 key figure lead time3 (w/0 dim) . i found there is a formula for this it shows like NODIM ( 'Lead Time 3' ).and there is a value for cal.lead time
    how can i get values in the report.
    Thanks ,
    VRV.

    Hi,
    Although your question is not clear, I understood that the formula built on that KF is NODIM. Basically it means, units of measurement is not considered when calculating.
    Eg: 5 Minutes + 5 Kilograms = 10
    You please try to analyze your KF by the above logic. Then you would be able to figure out why the data is not appearing in the report..
    Assign if helps...
    Regards,
    Suman

  • Data Migration Opening Balances are not updating in the Report F.08

    Hi,
    We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
    Why they are not updating in the report. In which table can i check the Data migration values in the system?
    Thansk
    Kishore

    Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
    F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
    Why it is showing like that?
    Thansk
    kishore

  • Section not visible in the report painter

    Hi Gurus,
    I created a report painter report for showing the P&L statement for a company code. I had to added a new section for calculating the statistical key figures. I was able to display the 2 sections initially, but later after changing some layout the keyfigures section is not visible anymore.
    Please let me know how can I retrieve the Key figures section.
    Thanks

    Hi Christian,
    And if you execute the report you don't see the second section?
    Yes, I am able to see the section in the edit mode and not when execute the report.
    In the report layout "formatting / report layout" in the area "rows / treatment of zero rows" are the rows hidden if the value is zero?
    The standard section layout has zero rows hidden. I tried changing it to print zero rows, but that didn't help.
    Maybe you have a selection where you only have zero values in this section so it does not appear?
    I was able to see the section in execute mode once, but then I tried to change the layout which caused me this problem. Please let me know if you have any other inputs.

  • Changes are not applying to the reports

    hi all
    i have moved the RPD and catalog file to UAT there i got few changes
    i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
    so i again i copied same RPD and catalog to UAT now it is working fine,
    why the changes are not applied to the reports that i have moved to UAT
    is it mandatory to move RPD and catalog to the other environment ??
    Thanks

    Hi,
    if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
    http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
    If not you need to deploy RPD and catalog into UAT.
    By,
    KK

  • G/L Account Description not displaying in the report

    Hi Friends,
    G/L account description was not found in the report, after loading g/l text and attribuites. Please help me what might be the problem in this regard.
    Regards,
    Raju..

    Is G/L Account depends on Chart of Accounts. Is their any way that G/L acount and description is displayed in report. G/L Account is appearing but not descrition. Master data attr & text loaded fine.
    Raju

  • %age entered in the Info record condition type is not flowing to the PO

    Dear SAP Experts,
    I have created a condition type ZCV1 by copying the condition type JCV1. But, if I enter the percentage in the JCV1 in the Info Record, it flows to PO, but, the percentage entered for ZCV1 in the inforecord is not flowing to the Purchase Order.
    Request to provide solution for the above problem.
    Thanks in advance.
    Regards,
    Muthuraman.K

    Sorry , Double Post

  • New InfoObject is not available in the report in the QA system

    hai
    i transported one report to QA system .
    then i changed <b>one InfoObejct</b> in the InfoCube & report in the DEVB. Then i transported that report & infocube to the QA system.
    But when i try to open the report in the QA system then it says that new InfoObject is not avialable in the report in QA system .
    So pls tell me wt i have to do .....
    i ll assing the points
    rizwan

    hai
    I included in the new InfoObject in the master data infoObject . And this master data infoobject is avialble in the InfoCube .
    This InfoCube also transported to UBW also. Even though im not getting this InfoObject in the report in the UBW report.
    So tell me wht i have to do ...
    Rizwan

  • Trying to get a refund on an app that do not work, but the report a problem button is grey out

    Hi
    I'm trying to get a refund on an app that do not work, but the report a problem button is gray out & Apple wants £20.00 for support
    where do I go from here
    Thanks

    To report a problem less than 90 days:
    http://reportaproblem.apple.com
    Sign in with the AppleID and Password used for the purchase.
    How to report an issue with your iTunes Store, App Store, Mac App Store, or iBooks Store purchase
    http://support.apple.com/kb/HT1933
    To report a problem greater than 90 days:
    http://www.apple.com/support/itunes/store

  • Could not connect to the report server

    I have created  SSRS reports using sql server 2012, those are works well but when i deploy the solution that time i get an error 
    "Could not connect to the report server http://myservername/ReportServer.
    Verify that the TargetServerURL is valid and that you have the correct  permission to connect to the report server.
    Please suggest me how to resolve this issue i lost more time on this problem.
    Thank You.

    Hi Anil,
    As JJordheim posted earlier, if we have no permission to perform the action we may get the similar issue.
    If the issue is persist, the issue may be due to User Account Control (UAC). There is a similar issue, please refer to it.
    http://social.msdn.microsoft.com/Forums/sqlserver/en-US/24011d1c-e61f-4f47-b037-1056c29bef4a/could-not-connect-to-the-report-server-httplocalhost8080reportserver-verify-that-the?forum=sqlreportingservices 
    Regards,
    Alisa Tang
    Alisa Tang
    TechNet Community Support

  • Currency is not showing in the result out of BW report.

    Hi All,
    I created a report, In the report out having key figure called "Amount", In the result its displaying as Amount =100, But as per the user requirement I need the amount value as Amount=100 EUR or MYR or GBP or USD like this.
    The keyfigures having property as fixed currencty as EUR, I made the mapping to 0loc_cuur, 0doc_curr in BW , In the cube output I can see the values populating in the currency columsn.
    In the query also doesn mention DIM id and its direct key fgures.
    Could you please give me some suggestins to get the currency with amount 100EUR.
    Is there any possiblity to write the abap code and concatenate the values in the report 100EUR or 100GBP like this.
    Thanks in Advacne.
    laks

    Hi Laks,
    Check this KF property in RSD1.
    If it has fixed currency 'EUR', then all the values will be reported only in EUR. your mapping of 0LOC_CURCY will not work.
    Now, in order to populate different currencies coming from the transaction data, you need to assign a reference currency object to this key figure. ( for ex 0LOC_CURRECY ).
    It will not be possible for you to change the ref currency, unless you delete the data in all the infoproviders which are having this key figure.
    If you can delete the data, then you can change the ref currency after data deletion and map this reference currncy to the source currency.
    Let me know, if there are any other amount key figures in the same target and what are their reference currencies.
    Thanks,
    Krishnan

Maybe you are looking for