Foreign object in disk drive

Does anyone know how to remove a foreign object from the DVD/CD disk drive. I've accidently put a digital camera card in this drive and can't get it out. It won't eject because it doesn't recognise it. I've tried putting a DVD in to see if it would eject with that put it just ejects the DVD. Any ideas?

I imagined I wasn't the first (could this be an Apple design flaw?!!!). Thanks for the video link-that was a much more imaginative (and Mac-Friendly) solution than the paper-clip and tilt method I finalised used (which also worked by the way but not without a lot of worry about irreparable damage).

Similar Messages

Foreign object in CD drive slot

Unfortunately an SD card has been pushed into the CD/DVD slot in my MacBook. Does anyone know how it can be retrieved? Or how to strip the machine to remove the drive.

Check this site out for help. http://www.ifixit.com/Guide/Mac/MacBook-Core-Duo/86

A foreign object is stuck in my drive slot

I was blowing dust from my slot-loading drive using compressed air - you know, a small metal canister attached to a red plastic nib. Well, the nib blew into the drive opening. Now, obviously, the drive won't work, and I don't exactly know that to do.
I'd like to find a way to eject the foreign object so my drive works again, but I don't how, or what the cost would be. Or would be be better to call in a loss and purchase a new external superdrive?
Does anyone know what I can do to retrieve the foreign object at home? Or this strictly the domain of the repair shop/Apple Store? What, roughly, would the price be, in either case?
Please be detailed! Thanks,

Paul_31:
Interesting idea. It seems that gravity would bring the object to the bottom of the drive opening; all you have to do is get anything with a little "grab" to draw the object out. However, it seems the object is lodged near the middle - and may be stuck. I tried to push the object down, but it's definitely stuck.
babowa:
I don't know how to take apart an iMac - but the uTube videos suggest that it's not simple. I believe that a trip to the Genius Bar is the only viable option.

How to find out if disk drive is faulty already?

How to find out if disk drive is faulty already?

Hi Sükrü
You can read the table E071 with the object id and get the transport request number. Use this transport request and read the table E070, the field "TRSTATUS" will give the status whether the object is locked or released.
Hope this helps !
Regards
Ranganath
PS : Reward points if found useful !

If something small got stuck in your disk drive what steps do you take to remove it?

if something small got stuck in your disk drive what steps do you take to remove it?

Depending on the model of Mac I would first try to tilt the unit to see if you can get whatever you got stuck in there nearer the edge. Do not shake the Mac to move the object - you could cause damage to internal components.
The next best thing is to use a very fine pair of tweezers or pliers and try to remove the object. Sometimes a credit card or firm business card may also help you move the object nearer to the lip of the optical drive.
Be warned though - you are not supposed to stick anything into the optical drive yourself to try and remove something as you could cause further damage. Your best bet is to take it into an Apple Store and have them remove it. Just as another warning though - this would count as accidental damage and so is not covered under your Applecare if you have it. You'll have to pay out of pocket to get the object removed.
Regards,

When I connect my iPad to my HP laptop and download software updates it disables my disk drive. Apple support do not have a solution for this.

When I connect my iPad to my laptop and update software it disables my disk drive. Apple does not have a solution and Microsoft Fix It will not fix the problem. I have taken my computer to a repair shop on two occasions now to have it fixed. They told me that it is some foreign device that has CD burning software and the only thing I have is my iPad.

They told me that it is some foreign device that has CD burning software and the only thing I have is my iPad.
Have you worked through the following document with that one?
iTunes for Windows: Troubleshooting CD issues caused by device filters

Open second disk drive

My top disk drive opens fine with the eject key. However, I cannot get the second one to open. I've tried the apple key, option, control, F12 and combinations of all but only the top drive will open and shut. How do I get that bottom one open?

Option-Eject only works on the top drive
Below is what it says in System profiler about drives. So I have two...I'll get someone to look for the loose cable.
Bay 1:
Product ID: ST3500630AS P
Serial Number: 9QG2KRSW
Firmware Revision: 3.BTH
Type: SATA
SMART Status: Verified
Capacity: 465.76 GB
RAID Sets: R0-1
Status:
Assigned: Yes
Failed: No
Foreign: No
Missing: No
Reliable: Yes
Roaming: No
Spare: No
Bay 2:
Product ID: ST3500630AS P
Serial Number: 9QG3CXGE
Firmware Revision: 3.BTH
Type: SATA
SMART Status: Verified
Capacity: 465.76 GB
RAID Sets: R0-2
Status:
Assigned: Yes
Failed: No
Foreign: No
Missing: No
Reliable: Yes
Roaming: No
Spare: No

Comparison of SSD with hard disk drives

Attribute or characteristic
Solid-state drive
Hard disk drive
Spin-up time
Instantaneous.
May take several seconds. With a large number of drives, spin-up may need to be staggered to limit total power drawn.
Random access time[45]
About 0.1 ms - many times faster than HDDs because data is accessed directly from the flash memory
Ranges from 5–10 ms due to the need to move the heads and wait for the data to rotate under the read/write head
Read latency time[46]
Generally low because the data can be read directly from any location; In applications where hard disk seeks are the limiting factor, this results in faster boot and application launch times (see Amdahl's law).[47]
Generally high since the mechanical components require additional time to get aligned
Consistent read performance[48]
Read performance does not change based on where data is stored on an SSD
If data is written in a fragmented way, reading back the data will have varying response times
Defragmentation
SSDs do not benefit from defragmentation because there is little benefit to reading data sequentially and any defragmentation process adds additional writes on the NAND flash that already have a limited cycle life.[49][50]
HDDs may require defragmentation after continued operations or erasing and writing data, especially involving large files or where the disk space becomes low. [51]
Acoustic levels
SSDs have no moving parts and make no sound
HDDs have moving parts (heads, spindle motor) and have varying levels of sound depending upon model
Mechanical reliability
A lack of moving parts virtually eliminates mechanical breakdowns
HDDs have many moving parts that are all subject to failure over time
Susceptibility toenvironmental factors[47][52][53]
No flying heads or rotating platters to fail as a result of shock, altitude, or vibration
The flying heads and rotating platters are generally susceptible to shock, altitude, and vibration
Magneticsusceptibility[citation needed]
No impact on flash memory
Magnets or magnetic surges can alter data on the media
Weight and size[52]
The weight of flash memory and the circuit board material are very light compared to HDDs
Higher performing HDDs require heavier components than laptop HDDs that are light, but not as light as SSDs
Parallel operation[citation needed]
Some flash controllers can have multiple flash chips reading and writing different data simultaneously
HDDs have multiple heads (one per platter) but they are connected, and share one positioning motor.
Write longevity
Solid state drives that use flash memory have a limited number of writes over the life of the drive.[54][55][56][57] SSDs based on DRAM do not have a limited number of writes.
Magnetic media do not have a limited number of writes.
Software encryption limitations
NAND flash memory cannot be overwritten, but has to be rewritten to previously erased blocks. If a software encryption program encrypts data already on the SSD, the overwritten data is still unsecured, unencrypted, and accessible (drive-based hardware encryption does not have this problem). Also data cannot be securely erased by overwriting the original file without special "Secure Erase" procedures built into the drive.[58]
HDDs can overwrite data directly on the drive in any particular sector.
Cost
As of October 2010, NAND flash SSDs cost about (US)$1.40–2.00 per GB
As of October 2010, HDDs cost about (US)$0.10/GB for 3.5 in and $0.20/GB for 2.5 in drives
Storage capacity
As of October 2010, SSDs come in different sizes up to 2TB but are typically 512GB or less[59]
As of October 2010, HDDs are typically 2-3TB or less
Read/write performance symmetry
Less expensive SSDs typically have write speeds significantly lower than their read speeds. Higher performing SSDs and those from particular manufacturers have a balanced read and write speed.[citation needed]
HDDs generally have symmetrical read and write speeds
Free block availability andTRIM
SSD write performance is significantly impacted by the availability of free, programmable blocks. Previously written data blocks that are no longer in use can be reclaimed by TRIM; however, even with TRIM, fewer free, programmable blocks translates into reduced performance.[25][60][61]
HDDs are not affected by free blocks or the operation (or lack) of the TRIM command
Power consumption
High performance flash-based SSDs generally require 1/2 to 1/3 the power of HDDs; High performance DRAM SSDs generally require as much power as HDDs and consume power when the rest of the system is shut down.[62][63]
High performance HDDs generally require between 12-18 watts; drives designed for notebook computers are typically 2 watts.

I wish I could get my head round the SSD vs HDD with a NLE rig. My builder is trying to persuade me to use a Toshiba 256Gb THNSNC256GBSJ for OS and programs, and it is only NZ$20 more expensive than the 450Gb 10k rpm VelociRaptor I was originally planing to use for the OS. That sounds suspiciously cheap to me, and I am concerned about the finite writes to SSD - mainly because I don't really understand it.
The rest of the new build is
3930K
Gigabyte X79-UD5
8 x DDR3 1600
Coolermaster with 750W PSU
Geforce GTX570
I plan to transfer the drives from my current system as a starting point, and reassess after giving it some use. That means
Either the above SSD or 450Gb 10k Raptor for OS (new drives)
300Gb 10k rpm Raptor (currently used for OS in old box)
150Gb 7k4 rpm Raptor (reserved for Photoshop Scratch in old box)
2 x 1Tb WD Blacks (data drives)
2 x 1Tb WD USB3 externals
I don't know how I would configure the drives in the new box, but have seen Harm's table and will try to follow his advice. It's a dreadful thing to admit, but I don't have a backup strategy, and the above drives are well over half full. Well over! And I am only just getting serious about video, (the rest is mainly CR2 files from my Canon 1Ds3 and 1D4)
I know it must be like banging your head against the wall, but should I avoid that SSD and go with the 450G Raptor? I have read a comment that the WD Blacks don't work well as Raid0. Is that BS or true?
I am about to give the go-ahead so need to confirm the spec.

How do I install CS6 on my new imac without a disk drive?

I purchased cs6 on dvd from adobe under a year ago and now want to install it on my new imac.How do I install it on the imac without a disk drive?

Giddy,
You can go ahead and follow the link below to download the CS6 for you.
http://forums.adobe.com/message/4295655#4295655
-Mandhir

Just bought a Lenovo 3000 N200 without a hard disk drive, need software

I just bought a Lenovo 3000 N200 Type 0769-BLG assembly date 07/09 from e-bay, it looks brand new but it had a fault, it was dead, perhaps a faulty motherboard and the hard disk drive had been removed. Assuming I can get the fault fixed, where can I get the Lenovo software that came with the original hard disk drive, I would prefer a free source, if that is possible, perhaps some kind person has put all of the CD's on to a DVD that I can borrow or buy a copy of. I was an IBM employee for 30 years before retiring 15 years ago. Dan McLean in Scotland, UK.

Call customer service directly to get a quick solution for this.
IPnaSh
First Spanish Community Guru - Colaborador ad honorem

Regarding the product time capsule...is the modem the same as airport extreme and is the disk drive always running? I'm worried about it lasting for at least five years.

Regarding the product Time Capsule... is the modem the same as the Airport extreme and is the disk drive always running??? I'm worried about it lasting at least five years.

John,
I'd pay good money to bet it wouldn't last 5 years... I don't rate the in built power supply and as for "server grade hard disk" - Hmmmm..... The failure rate of all HD's on the market after 3 year is 60%.
Regards,
Shawn

I can't copy my itunes library to an external hard disk drive!!

this is my first time at the forum and i dont find a better way to ask, i want to copy my itunes library to an external hard disk drive for have a back up, but when i try to copy it it appears this message "the item "itunes music" has 1 or more items that are in use and cannot be modified", i dont know why, then i search for help in apple support and this article http://support.apple.com/kb/HT1751, but i do what it says and i still having my problem, i can't copy my music, that message keep's appearing and it dont let me copy my music.

forget it i discover my problem, this message gives u 2 option stop or continue i just click continue and it get copied, i think this is normal but like this is my fisrt time i dot this i get confused, i think i still used to windows, i cant believe because i have a ear with this computer. well anything is a good experience.

How can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?

QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
Use Toshiba HDD Protection
Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
For more information on this utility, see the following article:
TOSHIBA HDD Protection
Optimize the drive
Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
Remove items from startup
Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
For more information, please see the following video:

QuestionHow can I optimize my hard disk drive usage and performance in Windows 8 or Windows 7?
AnswerThere are a few simple steps you can take to ensure your hard disk drive is used optimally.
Use Toshiba HDD Protection
Many Toshiba laptops come with a program called Toshiba HDD Protection pre-installed. This program helps to protect your hard disk drive from being damaged due to falls or impacts. By default, it should already be enabled. You might be tempted to lower the detection levels in this application, but doing so could cause your hard disk drive to be damaged. Remember that while the application can reduce the chance of damage, you should still avoid allowing the laptop to fall or suffer rapid impacts.
For more information on this utility, see the following article:
TOSHIBA HDD Protection
Optimize the drive
Windows 8 and Windows 7 optimize hard disk drives automatically through a process called defragmentation. Unless you've disabled this, you don't need to do anything. If you have disabled this and want to run the process, you can still do so.
In Windows 8, search for "Defrag" at the Windows Start screen and select "Defragment and optimize your drives."
In Windows 7, search for "Defrag" in the Start Menu's search field and select "Disk defragmenter."
You can use this tool to optimize your hard disk drives, allowing Windows to find needed files faster.
Remove items from startup
Some applications run automatically when Windows starts. This can add additional functionality, but it also decreases the performance of your computer. Sometimes you might want to disable certain programs from starting automatically.
In Windows 8, search for "Task Manager" at the Start screen. Select the "Startup" tab. Select an application you'd like to disable from starting automatically and then click the "Disable" button in the lower-right.
In Windows 7, type "msconfig" in the Start Menu's search field and press ENTER. Uncheck the boxes next to applications you'd like to disable from starting automatically.
You should be sure of the purpose of an application before disabling it from starting automatically. Some applications might be important. If in doubt, you might consider searching on the Web to discover more information about a program. Remember that if you find that you disabled something vital, you can always re-enable it.
For more information, please see the following video:

I have an iPad 2 and iPhone 4 and for them I use I cloud I have also 1 pc windows and at work place I use windows pc ; until now my files are stored on an external disk drive could' I use iCloud to perform the backup of my external disk drive ? Thanks

I have an iPad 2 and iPhone 4 and for them I use I cloud I have also 1 pc windows and at work place I use windows pc ; until now my files are stored on an external disk drive could' I use iCloud to perform the backup of my external disk drive ? Thanks
Loredano

These are the options you have.
Budget $1299.
http://www.apple.com/macbookair/
http://www.apple.com/macbookpro/
Best.

I have 2 auxillary disk drives for my MacBokk Pro. Time Machine uses one for backup and I use the other for storage, but I am unable to create a new folder or drag and drop files or folders to the aux drive.

I am unable to create a new folder on either of my auxillary disk drives. I can access the files and folders that were there when I transferred one of the drives from a PC. Time machine uses one for backup and I want to use the other to store photos which are large files. An help would be appreciated.

Thanks for the reply. If I reformat the drive will I be able to access the files on it from the MAC. I do not share the drive with a PC. The files were originally created on a PC which I no longer use. I do want to continue to access the files put there by the PC. I would like to not have to copy them over to the MAC hard drive just to use them. The second aux drive is new and works fine because it was formatted by the MAC. I can drag and drop files there and work with just as if they were on the internal drive.

Foreign object in disk drive

Similar Messages

Maybe you are looking for