Forgot password functionality not working - OAM
Hi,
I have issues with the forgot password functionality with OAM
The password policy is configured and its enabled for the users. The password redirect URLs are also available as part of the password policy configuration.
When i click on the forgot password link getting the following message
"This feature is not configured. Please contact the master administrator"
Please help me to resolve this issues.
Thanks
If I remembered correctly, you need to setup the challenge questions and answers to enable forget password feature. This require updating the LDAP schema etc. The steps are described in OAM documentation.
Similar Messages
-
External forgot password link not working
Hi,
I am trying to reset the password using the Forgot password link on the External site page, after I click on the forgot password link and enter the username in the textbox and click on the submit button, it displays the error below.
Error:cannot display page.
You cannot complete this task because one of the following events caused a loss of page data:
Your login session has expired.
A system failure has occurred.
The EBS version is 11.5.10.2 , OS version is Linux 64 bit.
Thanks
H.SPlease see if these docs helps.
Random error Your login session has expired when using Load Balancing [ID 387306.1]
Random error Your login session has expired when using Big IP F5 DMZ Loadbalancing [ID 361397.1]
Intermittently Receive "Error: Cannot Display Page" Across Multiple Products In RAC [ID 427931.1]
When using a Load Balancer Oprocmgr Fails To Keep Session After Implementing JServ Load Balancing ACROSS Multiple Middle Tiers [ID 469690.1]
11i/R12 How to Debug "Transaction Context Is Lost" or "You are trying to access a page that is no longer active" [ID 456906.1]
Thanks,
Hussein -
Forgot Password link not working
I was trying to add the sync to the new installation of windows 7. But i have forgot the password for the user account. I have tried so many times to reset the password but never received any emails from you guys.
HelpYou are right. Sync's reset password feature is broken at the moment.
I found a bug where the issue is being tracked and as soon as a fix is posted there I'll update this post. It looks like the server that sends the emails is offline or having some other sort of technical issue. I can't say for sure b/c I don't work for Mozilla.
Anyway, even the Mozilla employees themselves are unable to get their password reset emails. So take comfort in knowing that you aren't the only one with this problem. :) As far as how soon you can expect a fix? I didn't see any timetable for that. I'll let you know if that changes. -
Forgot password mailer not working
Can any one see wha't worng here.
This piece of code should return the users password by email but the email arrives successfully without any password.
The email is sucessfully passed as $_POST['email'] as it is used as the email address for the email sent so something else msut be wrong>
Any ideas?
$email = $_POST['email'] ;
$sql = mysql_query("SELECT email, password FROM users where email = '$email'")
or die(mysql_error());
$row = mysql_fetch_array($sql);
$rownum = mysql_num_rows($sql);
$to= $row['email'];
$subject= "Your login details";
if(!$rownum ) {
echo "<H3>Sorry, that email address does not match our records</H3>";
if($rownum ==1 ){
$message .= "Your password is:\n\n".$row['password']."\n\n
To sign-in click here http://www.mysite.com/admin/sign-in.php";
$header = "From: [email protected]";
$sent = mail($to,$subject,$message,$header);
if($sent)
print "<H3>Your password has been sent to your e mail address</H3>" ;Are you seeing "Your password has been sent to your e mail address" message?
It can be a lot of things.
Some servers (recipient side) will accept emails with proper headers only.
You are sending the email as user "nobody". Your server might be set to prevent to send emails as nobody which requires you to send it via SMTP connection.(you can ask your host about this) -
Forgot Password Functionality.
Hi Guru's,
I've gone through some of the metalink notes to understand how the oracle provided forgot password link works in applications.
My findings were:
1) Have to set value to 8 for "Local Login Mask".
2) WF Notification Mailer needs to be set, with IMAP Server configuration to get incoming mail.
Hope, these two configurations is enough to enable the oracle provided forgot functionality. Please let me confirm this. - If it is not, please let me know what are the other configurations are required.
Also read, User Management need to be configured - Is this true ? If it is please suggest some document.
Also found one another metalink note as we dont have IMAP server set- regarding implementing forgot password functionality without inbound server. I've followed the note, still i am not getting mail to my outlook.
Please help!
Thanks with Regards,
Naresh MushkamHi,
You can use the wwv_flow_fnd_user API. This API has a reset_pw procedure with these arguments:
P_USER VARCHAR2 IN
P_SECURITY_GROUP_ID VARCHAR2 IN
P_MSG VARCHAR2 IN
Refer to the following post for further implementation:
forgot password link on login page
-Priyanka -
My ipad mini is disabled and password is not working
Ipad mini disabled and password is not working. Unable to get serial because can't unlock ipad. Have not previously synced with a computer.
How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
my password will not work?
Which password? Lock screen, network, backup?
If you forgot the lock screen password:
Connect in recovery mode and restore, you'll get the option to reset the passcode during this process:
iOS: Unable to update or restore and iPhone and iPod touch: Wrong passcode results in red disabled screen
Go to Setting/General/Reset and reset your network connections, to be able to put in your password again.
If you can't, set it up as new device, without using the latest backup:
How to back up your data and set up as a new device
If your backup is encrypted, you'll have to set it up as new device without using the backup as well. -
My iTunes password does not work on my iPhone...
My iTunes password does not work on my iPhone, but it does on my MacBook. Why? This is really annoying. How can I solve my problem? I don't even know how to contact Apple.
dennythepest wrote:
My iTunes password does not work on my iPhone,...
Try This...
Close All Open Apps... Sign Out of your Account... Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears. Release the Buttons.
http://support.apple.com/kb/ht1430 -
My other apple store ID ([email protected]) password is not working, so I tried to send a message to my Yahoo email (ID) the new password, so when it said that a massage was send to my email, but when I login to my yahoo email, I didn’t receive any email from apple
You can send over WiFi, but it sounds as if you need to setup your Gmail account, or did you do this already?
-
Not able to sign into Blackberry Protect. Backup and Restore function not working. Message is: "Your device isn't associated with a Blackberry ID." My Blackberry Messenger and Blackberry World is working fine so I am sure its not an ID issue on the phone. I can sign into Link, Blackberry.com and Protect. I see my device in Protect but cannot send messages or view it on a map. Times out with cannot reach device message. BB Protect on Device has a swirling circle beside the on/of switch. Cannot turn off.
I have deleted Link and re-installed.
I have reset phone to default(factory) and signed in.
OS level is 10.2.1.3062
BB Link is 1.2.3.56
Solved!
Go to Solution.I managed to figure this out myself. I had to delete the device from the Blackberry Protect website. protect.blackberry.com. I wiped my device again and signed in with my Blackberry ID. I dont know if the step of wiping was necessary as I did not try my backup with the current configuration on the device following the delete. Restore is in progress for me!
-
SAP* and DDIC password is not working in Cleint 000
Hi,
I have Installed ECC 6.0 IDES Server on Windows 2k3 with Oracle database. First time i was able to login to 000 client with SAP* (default pwd) and did some post installation steps. Now the password is not working.
I tried the following:
Go to cmd prompt.
Sqlplus /nolog
conn /as sysdba
sqlplus>UPDATE SAPSR3.usr02 set uflag=0 where mandt='000' and uflag=128;
All the SAP users were Unlocked.
Then i tried delete command.
sqlplus>DELETE SAPSR3.usr02 where mandt='000' and bname='SAP*';
it says " 0 rows deleted "
Parameter login/no_automatic_user_sapstar= 0 is set.
Then Restarted the SAP server and tried logging with password pass it says user and password incorrect.Hi,
As I have given in the earlier pls go through that link.
And also ...It is good practice to put back the automatic sapstar to 1 as this will not allow other to use same way as sap* /pass and log into the client.
The first thing is like create one more user in the 000 ,and also other super user incase if you have to use 000 with super user and have your own mechanism like have cutomised program and tcode with which you can activate 000 super user and use some thing like this...or it is only known to SAP BAsis Administrator.etc..
And also do not work on 000 for regular development or prd work make a copy of this client and start using them .
This has to be used only for Support pack other SAp related activities.
The first step after installation is to make a copy of these refrence clients.And start using them.
Secondly create the sap* usermaster in 000 and remove profiles .
And enable parameter login/no_automatic_user_sapstar to 1.
with this we are securing the super user from misuse.
Incase of emergency you need to delete the sap* user master from Oracle level then activate the prifile parameter and the loginto the 000 client using sap*/Pass.
Hope this helps.
Get back if you need more information.
Thanks. -
When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad. Why?
Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.
-
iCloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?
Firefox also makes regular backups of your bookmarks in a folder named bookmarkbackups in your personal settings folder. You can restore the backup to your new Firefox, but unlike importing the HTML-format file, it is a complete drop-in replacement, so if you have saved new bookmarks you do not want to lose, the export/import method may work better for you.
By default, Windows hides your personal settings folder so the easiest way to access it is from inside Firefox. You can use either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This will launch a window showing your Firefox settings files.
You might want to back up this whole folder if you have other data you want to preserve from your XP computer.
Either way, you should find the bookmarkbackups folder here and when you click into it, find maybe 10 files with dates in their names.
The procedure to restore the file once you have it on removable media or some other convenient place is described in this article: [[Restore bookmarks from backup or move them to another computer]].
Regarding the other files and what you might find of use: [[Recovering important data from an old profile]]. -
TACACS enable password is not working after completing ACS & MS AD integration
Enable password for (Router, Switches) is working fine if identify source is "Internal Users", unfortunately after completed the integration between ACS to MS AD, and change the Identity source to "AD1" I got the following result
1. able to access network device (cisco switch) using MS AD username and password via SSH/Telnet.
2. Enable password is not working (using the same user password configured in MS AD.
3. When I revert back and change the ACS identity source from "AD1" to "Internal Users" enable password is working fine.
Switch Tacacs Configuration
aaa new-model
aaa authentication login default none
aaa authentication login ACS group tacacs+ local
aaa authentication enable default group tacacs+ enable
aaa authorization exec ACS group tacacs+ local
aaa authorization commands 15 ACS group tacacs+ local
aaa accounting exec ACS start-stop group tacacs+
aaa accounting commands 15 ACS start-stop group tacacs+
aaa authorization console
aaa session-id common
tacacs-server host 10.X.Y.11
tacacs-server timeout 20
tacacs-server directed-request
tacacs-server key gacakey
line vty 0 4
session-timeout 5
access-class 5 in
exec-timeout 5 0
login authentication ACS
authorization commands 15 ACS
authorization exec ACS
accounting commands 15 ACS
accounting exec ACS
logging synchronous
This is my first ACS - AD integration experience, hoping to fix this issue with your support, thanks in advance.
Regards,Hi Edward,
I created a new shell profiles named "root" as the default one "Permit Access" can't be access or modified, underneath the steps I've made.
1. Create a new shell profile name "root" with max privilege of 15. And then used it in "Default Device Admin/Authorization/Rule-1" shell profile - see attached file for more details.
2. Telnet the Switch and then Issue "debug aaa authentication" using both "Root Shell" and "Permit Access" applied in Rule-1 profile.
Note:
I also attached here the captured screen and debug result for the "shell profiles" -
My appleID password is not working on my iPhone.
I have reset, resynched, reassociated my ID nothing is working. I only noticed it yesterday and I think it's only been a week or so. I noticed my phone and none of my ipods are associated with my itunes even though they have been for at least two years. I added an ipad last month. The password is not working on the ipad either. Please help! It works in my actual itunes and apple account when I log in on my laptop.
https://discussions.apple.com/thread/5478030?tstart=0
Maybe you are looking for
-
Unable to open.File type not supported.
Hi., I'm geting error while opening any files in my meory card & even sometimes im getting disk error.could someone help me on fix this issue. Nokia C6-00 Software Version : V 20.0.042
-
How to deal with dynamic selection screen elements when macros are used?
Hello experts, This is regarding the dynamic selection screen elements. Actually the requirement is to modify the existing standard report program RFUMSV00 by copying it into a Z report, adding a few selection screen elements and new fields in the ou
-
How to enter EXECSQL in BW 7?
Hello Experts, I have a problem regarding a transaction which I know from the old SAP BW 3.5 it's called EXECSQL. Now I also would like to use this transaction on the new SAP BW 7.0 system but the transaction is not longer available. Could you please
-
I am using Thinkpad laser mouse (bluetooth). The wheel works for msn, IE etc, but doesn't work for Firefox. I have checked with agent via live chat. None of the configuration regarding mousewheel is bold (under about:config), but then there was some
-
Role of a functional consultant in an upgrade project
Hello friends, My client is planning for an upgrade of 4.7 to ECC 6.0. Could you pls give me some info regarding the Role of a functional consultant in an upgrade project. Naveen