SAP* and DDIC password is not working in Cleint 000

Hi,
I have Installed ECC 6.0 IDES Server on Windows 2k3 with Oracle database. First time i was able to login to 000 client with SAP* (default pwd) and did some post installation steps. Now the password is not working.
I tried the following:
Go to cmd prompt.
Sqlplus /nolog
conn /as sysdba
sqlplus>UPDATE SAPSR3.usr02 set uflag=0 where mandt='000' and uflag=128;
All the SAP users were Unlocked.
Then i tried delete command.
sqlplus>DELETE SAPSR3.usr02 where mandt='000' and bname='SAP*';
it says " 0 rows deleted "
Parameter login/no_automatic_user_sapstar= 0 is set.
Then Restarted the SAP server and tried logging with password pass it says user and password incorrect.

Hi,
As I have given in the earlier pls go through that link.
And also ...It is good practice to put back the automatic sapstar to 1 as this will not allow other to use same way as sap* /pass and log into the client.
The first thing is like create one more user in the 000 ,and also other super user incase if you have to use 000 with super user and have your own mechanism like have cutomised program and tcode with which you can activate 000 super user and use some thing like this...or it is only known to SAP BAsis Administrator.etc..
And also do not work on 000 for regular development or prd work make a copy of this client and start using them .
This has to be used only for Support pack other SAp related activities.
The first step after installation is to make a copy of these refrence clients.And start using them.
Secondly create the sap* usermaster in 000 and remove profiles .
And enable parameter login/no_automatic_user_sapstar to 1.
with this we are securing the super user from misuse.
Incase of emergency you need to delete the sap* user master from Oracle level then activate the prifile parameter and the loginto the 000 client using sap*/Pass.
Hope this helps.
Get back if you need more information.
Thanks.

Similar Messages

EHP4 installation using EHPI : Error message: DDIC password does not work:

Dear All,
We are upgrating enhancement packages 4 using EHPI in 64 bit server. I am facing this error in Extraction phase , I have to provide DDIC / SAPServiceSID/ DB specific , next says ddic password is not correct. But when i tried to login with the same password into 000 client, it works. But when through EHPI , it throws error. Kidnly check the error and please suggest me ... Thanks in advance..
Error message: DDIC password does not work: RFC call to failed with key RFC_ERROR_COMMUNICATION (open): SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed Connect_PM DEST=R3D, GWHOST=SAPRBSBD-01, GWSERV=sapgw00, SYSNR=00 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR partner 'SAPRBSBD-01:3300' not reached TIME Thu Dec 24 12:27:13 200 RELEASE 710 COMPONENT NI (network interface) VERSION 39 RC -10 MODULE nixxi.cpp LINE 3147 DETAIL NiPConnect2: 192.168.1.40:3300 SYSTEM CALL connect ERRNO 10051 ERRNO TEXT WSAENETUNREACH: Network is unreachabl.
Regards
Raj

Dear Rajeev,
DDIC pwd for 001 is not same as 001,Will that be a problem ? But the Extraction requests for DDIC 000 client password. Are you sure UME comes into this scenario ?
@ Raghu - I have checked the link and it speaks about the resetting the EHPI. I dont want to reset and want to solve ddic password error.
Sorry if am wrong
@ Gerard,
Yes the hostname is SAPRBSBD-01.I am able telnet the IP 3300 and it works fine. FQDN SAPRBSBD-01.chen.local. The smicm service entries are with SAPRBSBD-01 but not with FQDN. Changing it to FQDN will help us to resolve the issue. Please suggest me.
Also the error refers to some RFC connection, any idea on that.
Thanks to all and looking for your valuable suggestions.
Raj

SAP* and DDIC passwords for new clients in Sol Man 4.0

Hello all,
I just recently finished a Solution Manager 4.0 on Windows 2003 server box. Then, I performed some of the post installation steps until I had to create a new client. So, I went to scc4 and created a new client. When trying to get access to this new client through SAP*, the default password did not work and the entries were not created in the table usr02. Also, I tried to insert the missing entries into the usr02 table, but had no success after all.
I hope some of you can help on this, because I am stucked on it.
Regards,
Luis Alberto Zeró

Hi guys ..
i thing you can check in Document Installation guide Solution manager on Page 108
If you install a new ABAP or ABAP+Java system, in most cases you do not need to perform the client copy for
the ABAP stack. SAPinst creates three ABAP clients during the installation, client 000, client 001, and client 066.
You can use client 001 for production.
The following procedure describes how to perform a client copy manually. We recommend that you
use client 001 as source client.
Caution
If you want to use a client other than the default of 001 as your production client, you have to reconnect
the Java part to the production client as described in SAP Note 937323.
Procedure
1. Maintain the new client with transaction SCC4.
2. Activate kernel user SAP*:
 a) Set the profile parameter
 Login/no_automatic_user_sapstar to 0.
 b) Restart the application server.
3. Log on to the new client with kernel user SAP* and password PASS.
4. Copy the client with transaction SCCL and profile SAP_CUST.
5. Check the log files with transaction SCC3.
6. Deactivate kernel user SAP*:
 a) Reset login/no_automatic_user_sapstar to 1.
Caution
 You create SAP system user SAP* on the new client
 before resetting
login/no_automatic_user_sapstar.
 b) Restart the application server.
rgds
echo

HT1212 My phone is disabled. I just loaded IOS 7 and my password does not work.

My phone is disabled. I just loaded IOS 7 and my password does not work.

I do not understand how to remotely wipe the phone using icloud, find my phone or my apple id and password. Kindly explain step by step as I am an older individual and I am confused

HT4946 i want to backup my iPhone to my new iMac but my backup is selected to Encrypt Local backup and my password does not work.

I am trying to backup my iPhone on my new iMac iTunes. It is currently backed up on my PC and encrypted. Both PC and iMac iTunes have Encrypted backup selected. My password does not work for either iMac or PC. Should I go ahead and try to backup to my iMac iTunes.

Sorry to hear about your phone jb111jb! We'll do everything we can to help find the best route! The only way to remove the password is flashing the device, but that will erase all the content. Have you ever backed up using Verizon Cloud or Google Sync? Do you have a memory card?
AshleyS_VZW
Follow us on Twitter @VZWSupport

Just started my new Macbook Pro, from Time Machine backup and the password is not working

Just got home with my new mackbook pro, and going through the startup process I booted from a time machine back up of my 2007 macbook. When I got to the login part of the process, after the new macbook was registered and ready to go, and now my password is not recognized.

Sorry about that.
I just got done posting back and forth with someone with a similar problem (not exact).
Turn the power off by holding down the power button, that is if just one push does not turn it off.
Then turn it back on and hold down the Option key. That will give you a startup screen where you can select which partition on the drive to boot into. Select the Recovery partition. From there you can use Disk Utility to wipe the Macintosh partition of the drive and then do a reinstall of the OS from the Apple website.
You need a internet connection to do this and depending on your internet speed it can take a few hours to complete. If you have a fairly fast internet connection it may still take 1-2 hours to download the 3.5+GB file to do the reinstall.
Before you go through all this try turning the system off and back on a few time to see if Lion can recover on it's own. I doubt it but it's worth a shot.
Again sorry for the condescending tone.
Happy New Year.

My name and/or password are not working on start up page. Got given used macbook pro and new to apple so please help!

My brother gave me his macbook pro and I'm having trouble getting past the start up page that asks for my my name and password. I have an apple id and password but these don't work nor does me typing my actual name and the same password. I've rung apple twice and the first person said I had to reset my uusername account and told me I could do so by visiting the support part of the apple website using the link he gave me. The information tells me how to do this but I have to have the computer up and running to reset/change the account username and password. So no joy. Second time I spoke with a lady who told me the name and password should be the same as the one my brother used when he had the computer but having entered the name and password he gave me it still doesn't work. I've tried all the different name types of my name e.g. full name, no spaces, capitals and no capitals etc but every time I click on the right pointing arrow thing or press the enter button the password does a quiver/shake thing and nothing happens. My bro says he has a relatively new lion operating system. I haven't a clue what to do as I'm new to using apple computers and I've spent ages looking through the support section with no success in finding the solution. Any help/advise would be much appreciated. Ta

Resetting User Password in Lion and Mountain Lion
Boot into your Recovery Partition by holding down the Command and R keys whilst booting.
When the Recovery screen appears, go to the Utilities menu and open Terminal.
In Terminal, type:
resetpassword
...a small app will open and allow you to choose the user for whom you want to change the password. If you are the admin, be certain that you choose your admin user. Type in your new password twice and give yourself a good hint. Click OK (or Done or whatever) and reboot, enjoying the use of your new, hopefully memorable, password.
Good luck,
Clinton

I just purchased a new macbook pro and my password is not working.

I followed the set up instructions and attached my external hard drive in order to use the time capsule to move all my data. The external hard drive was disconnected half way through and the computer froze so I held down the power button and turned the computer off. When I turn it back on and enter my password it is not recognised but I know it's the correct password.
Please can you help! Ideally I would like to just start again.
Thanks

Shootist007 It has to do with the first reply to the OP's question, and Joseph Albanese2, that referenced article has to do with "hackintosh's". scratch66 - what web browser are you using?

I have an old Nano and I am attempting to transfer the music to my new iPhone. I have a new Apple ID for the iPhone (and the same one is used on my IPAD). My problem is that the Nano usesthis old Apple ID and my password does not work.

I cannot get access through the online security as when it requests my birth date, it informs that it is wrong (I got it right). ANd, when i attempt to do it via email, I don;t get the email in either of the only 2 accounts that I ahve ever had.
Any ideas?

Time to contact Apple support directly and have them assist you with resetting the password.
http://www.apple.com/contact/
B-rock

Cant unlock with finger print scanner and alternate password is not working...only have a few tries left before it resets to factory...help please???

Is there a default password???

If you activated Android Device Manager on your phone and associated it with your Google account, you may be able to use Android Device Manager to unlock your phone.

SAP GUI not working with SAP* and DDIC default passwords

Hi SAP Guru's ,
at last I installed the SAP ECC6.0 on Windows 2003 (stand alone) with Oracle 10G database.
I installed the SAP GUI , when I am trying to loging from SAP GUI clients 000 and 001 with SAP* and DDIC user accounts I am naot able to login . please give me the how to configure this .
thanks in advance
Edited by: srinivas kaveti on Apr 4, 2008 9:16 PM

Hi Srinivas,
You should set "login/no_automatic_user_sapstar=0", in the SAP profile. With ECC 6.0, default sapstar user deactivated. You can take a look at OSS note #68048, for detailed information.
Best regards,
Orkun Gedik

SAP* and DDIC locked and SQL commands not working

Dear All,
We work on ECC6 and SQL 2005 as database.Somehow our SAP* and DDIC user gets locked in production server client 240 and SID AEP
I tried the following things but none worked.Every time getting error.
1. First i tried to run the following command in SQLPLUS mode
in th command prompt i typed sqlplus / nolog(then enter)
I got the following error sqlplus is not recognized as an internal or external command,operable program or batch file.
2 Then i thought may be we work on SQL database we may already be in the SQLprompt.Still when i typed conn / as sysdba,same error
conn is not recognized as an internal or external command,operable program or batch file.
3.Then i again go to the command prompt and typed
delete* from sap<AEP>.usr02, where BNAME = ' sap* ' and MANDT = ' 240 '
This time I get the system cannot find the file specified
Anyone can please clear my following doubt.
1. Am I requiredto go in SQLPLUS mode even when we have SQL Database.
2. How to unlock this SAP* and other super users.Cause yesterday somebody must have tried to login to sap*,ddic,and sapbasis and in the process locked all by entering the wrong password.
PS: Other users are working as we have role based authorization
Help will be highly obliged
Regards,
Ashutosh

Hello, ive got a problem with the SAPDB abd SAP* and DDIC in Client 000
in our PROD 000 client we forgot the password for SAP* , DDIC and cannot delete it.
Now the account was locked. please help how to reset SAP * this account on SAPDB.
Its DB Versio 7.7! I read a lot about that! Please, step by step, is that a problem of interface sqlcli, or rights?
Please could somebody give me an feedback about sqlcli, could i delete it with this tool the user? Because SQL studio is damaged on that server. Failed installation,Will not work! could not remove!
I have to configure the server! sorry, i am not so much familar with SAPDB
in old releases the shema is SAPR3 the new (NW 7) is SAPSR3.
Checked 701!
please set login/no_automatic_user_sapstar to 0.= Done!
At sql propmt: Thats no SAPDB sqxli command, right!!!!
select * from sapsr3.usr02 where bname='sap*' and mandt='000';
Thats doesnt work!
When i logon with the superdba , the connect is fine!
After the command execute
D:\sapdb>sqlcli -U DEFAULT delete from sapsr3DB.usr02 where bname='sap*' and mandt ='000';
-10757: XUSER error (the USERKEY is unknown)
select * from sapsr3.usr02 where bname='sap*' and mandt='000'; Doesnt work!
What the hell is the error??? Doesnt find the answer, before, i get the same error then the other colleagues
unknown table USR02! Is this superdba? Rights of DBA??
please give an step by step advice. Logon with..... before ... choose sqlci..............sqlcli, \? + sql execute......
Kind regards
Ralph

How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?

Hi,
How do we reset password for SAP* and DDIC user in SAP R/3 ECC 6.0?
I tried with acual method as below from client '000':
DELETE FROM USR02 CLIENT SPECIIED WHERE BNAME = 'SAP*' AND MANDT = '001'.
After this when I tried to logon '001' using SAP* with password PASS it is giving the message that Incorrect logon and password.
(Also when I checked for 'SAP*' in 001 it looks like it is not got created as I queried as below:
SELECT SINGLE * FROM USR02 CLIENT SPECIFIED WHERE BNAME = 'SAP*' AND MANDT = '001'.)
Can anybody throw some light on this? RewardS is guranteed for solutions!
-B S B

Hi again:
I forget to tell.
You must restart the system. So, that a new user with the name "sap*" gets generated with password "pass"
Hope this wil help,
Eric

When I attempt to updates apps on my ipad my password does not work. I tried updating them one at a time and it still doesn't work. I've reset my password and I can use the new password and update apps on my PC but not on my ipad. Why?

When I attempt to update apps on my ipad my password does not work, even when I attempt to update each app separately. When I change the password it works on my PC but not on my ipad. Why?

Try logging out of your account on the iPad by tapping on your id in Settings > Store and then log back in and see if it then works.

ICloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?

iCloud password works on everything but erasing all data. I got a new iPhone and need to wipe this one but am not sure how else to do this since the password is not working. Any suggestions?

Firefox also makes regular backups of your bookmarks in a folder named bookmarkbackups in your personal settings folder. You can restore the backup to your new Firefox, but unlike importing the HTML-format file, it is a complete drop-in replacement, so if you have saved new bookmarks you do not want to lose, the export/import method may work better for you.
By default, Windows hides your personal settings folder so the easiest way to access it is from inside Firefox. You can use either:
* "3-bar" menu button > "?" button > Troubleshooting Information
* (menu bar) Help > Troubleshooting Information
* type or paste about:support in the address bar and press Enter
In the first table on the page, click the "Show Folder" button. This will launch a window showing your Firefox settings files.
You might want to back up this whole folder if you have other data you want to preserve from your XP computer.
Either way, you should find the bookmarkbackups folder here and when you click into it, find maybe 10 files with dates in their names.
The procedure to restore the file once you have it on removable media or some other convenient place is described in this article: [[Restore bookmarks from backup or move them to another computer]].
Regarding the other files and what you might find of use: [[Recovering important data from an old profile]].

SAP* and DDIC password is not working in Cleint 000

Similar Messages

Maybe you are looking for