Form debugging - Which line is causing the error?

I have a form that I'm working on, and when I run the form like normal, just as the end user would, I keep getting an error, "FRM-41039: Invalid Alert ID 0." I can't figure out where this error is coming from in my code. It seems that it must have something to do with timing, because in trying to track down the error, when I run the form in debug mode, obviously the timing is slower as I go line-by-line in the code to see which line may be causing the error, but when I do that, I don't get the same error. I'm not close to being an expert when it comes to design-time debugging in forms, and I was wondering if someone with more experience could point me in the right direction. Is there any way that I can somehow determine which line of code is causing this error to raise? If I could identify the line of code, I could maybe find out which alert it's looking for, right? Then I could maybe narrow down the problem a bit more. Anyone have any ideas? Thanks in advance.
YEX
<)))><

Like it says :"FRM-41039: Invalid Alert ID 0." Alert does not exist. So try to find line in your code which contain something like:
Show_Alert("<name of alert>")
Or Alert with this name dows not exist or you are misspelling the name of existing Alert.

Similar Messages

The Webmail version of Lotus knows keep giving the following error message: A problem has occurred which may have caused the current operation to fail. How do I fix this?

I downloaded the new version of Firefox.
Now, when I try to access my webmail from Lotus Notes (at https://webmail.WorldVision.org) the following message shows up when trying to preview my inbox.
"A problem has occurred which may have caused the current operation to fail."

Actually, this isn't a cache problem, it's an issue with iNotes and Firefox 4. I found the answer in comments at a similar question. See:
https://support.mozilla.com/en-US/questions/798271#answer-153202
I downloaded the Remote XUL Manager add-on for Firefox (https://addons.mozilla.org/en-US/firefox/addon/remote-xul-manager/), restarted FF, went to Tools and scrolled down and clicked on "Remote XUL Manager." I clicked "Add" and pasted the URL for the link where I log-in to Lotus Notes into the dialogue box, and ta-dah! Back to email. Took me longer to type this than fix the problem.

Lotus Notes Mail remotely gives me following "A problem has occurred which may have caused the current operation to fail. A problem has occurred which may have caused the current operation to fail." Works OK with IE9 64bit, IE9 32bit and Google Chrome.

I get Lotus Notes Mail from the Acton site link to the lotus domino server.
Works fine in IE9 (32 & 64bit) and with Google Chrone. Google 7 gives the following error:-
"A problem has occurred which may have caused the current operation to fail."

Actually, this isn't a cache problem, it's an issue with iNotes and Firefox 4. I found the answer in comments at a similar question. See:
https://support.mozilla.com/en-US/questions/798271#answer-153202
I downloaded the Remote XUL Manager add-on for Firefox (https://addons.mozilla.org/en-US/firefox/addon/remote-xul-manager/), restarted FF, went to Tools and scrolled down and clicked on "Remote XUL Manager." I clicked "Add" and pasted the URL for the link where I log-in to Lotus Notes into the dialogue box, and ta-dah! Back to email. Took me longer to type this than fix the problem.

How to find out the column causing the error while doing update or insert

I'm getting the below error when attempt to update or insert a long string that is more than its defined length in the DB2. For example in table the column length is defined as 50, however from UI the data for that column is more than 50 chars.
{color:#ff0000}**Caused by: com.ibm.db2.jcc.b.SqlException: DB2 SQL error: SQLCODE: -302, SQLSTAT**
**E: 22001, SQLERRMC: null**
**at com.ibm.db2.jcc.b.hh.b(hh.java:1369)**
**at com.ibm.db2.jcc.b.hh.c(hh.java:1356)**{color}
The above issue can be fixed by setting maxlength in the UI itself. However in my case, there is a backend program trying to insert or update load of records. If the exact column name causing the error is known, it will be helpful to load the data properly in the next attempt.
I have worked around it using SQLWarning and DataTruncation, but couldn't find the solution yet.
Any help on this issue will be really appreciated.

Medraf wrote:
what is validator? Is it like validation.xml in struts? Are you suggesting like defining set of validation rules in the xml and apply the same for each record before doing any update or insert in DB? If so, then I could implement this validation logic in my backend code, however it may take more time to complete the batch prcoess.
How you implement doesn't matter.
However given a schema generating code for such validation is trivially simple at least for field types and sizes. Relationships are harder but those can be handled via custom rules.
Alternatively I'm looking for some kind of API in JDBC or Hibernate which gives the detailed sql exception message containing the error info like the column name and the reason for failure while update or insert. If not possible, then validation logic needs to be implemented.Having seen something similar in Oracle years ago I seriously doubt that you are going find it magically appearing in JDBC/hibernate. There might be warning on the SQLException (see the java docs for SQLException) but I wouldn't count on it. Other than that the only possibility is making some sort of call in db2 itself that tells you the error. Only problem with that is it might require the context which might not be available once you see the error (presuming, especially for performance, that you are using batch processing.)
As a start figure out how to find out using only db2 (docs and/or db2 forums.)

Transaction Notification to show 'Line Number' in the Error message

HI guys
I been trying to get this line no. to be shown in the error message, have not tried that, is this possible?
i did a Notification to check on the line level, however, due to many line items, user has to check one by one, is that any way to tell user which line is having the problem
EM, Cheers

Hi,
Check this document:
How to close a discussion and why
Thanks & Regards,
Nagarajan

RasClient:dialed a connection named "VPN Connection Name " which has failed. The error code returned on failure is 789 on windows 8.1

Hello,
i am trying to connect to my corporation VPN Server " ISA 2006" using windows 8.1 client built in VPN, but its returned the following error:
Event ID 20227: dialed a connection named "VPN connection Name" which has failed. The error code returned on failure is 789.
VPN connection is working fine with windows XP and windows 7 with no issue , this error is only appear when try to connect to using windows 8 client machine.
this error is shows only on windows 8.1 client , same procedures used to enroll the certificate from internal CA " IPsec Type" is followed .
below are the ISA server specifications:
VPN Server : ISA 2006.
windows Server version 2003.
appreciate your quick help and reply .
Thanks

Thanks for your reply.
i would like to add another point for this case, that when we are trying to enroll a certificate from internal CA web enrollment directly using windows 8 " internet explorer 11" , its install a certificate without Digital
Signature and non-repudiation in key usage property, then when try to connect , its will give the above error 789 ..
when try to enroll a certificate into windows 7 " internet explorer 10" and then export and import this certificate into windows 8.1 machine "with the name of
windows 8.1 machine" into windows 8.1 machine, the VPN is working normally and without issue.
The properties of the Certificate are difference between windows 7 machine and windows 8 machine is key usage missing the Digital Signature and non-repudiation properties when enroll
from windows 8.1 " internet explorer 11", this is in fact because of
we don't have an option for key usage " both" when subment a certificate on web enrollment page from windows 8 machine ,, the only option available is exchange "
no signature and both option available "
i believe that there is something wrong when using windows 8.1 internet explorer 11 so its gave a certificate with wrong key usage property .
appreciate your quick help in this .
thanks

Show the object and the line number, where the error happens in Forms

Hi!
Al lot of our programmer use the ugly when others clause to raise messages like "error <sqlcode> happens in ....". Often this hides the really error in some underlying procedures. Is it possible to call the error stack from forms like in 10g database dbms_utility.format_error_backtrace? Actually FRM-40735 hides all this information. This should be work for client and database pl/sql errors!
With kind regards

First of all, send every programmer in your organization a message to STOP doing that. I am afraid there is nothing you can do when you have to call some stupid code from your form that contains the when others then... sequence.
Below is an email I sent out just two months ago. I'll share it with you:
Hi _______,
I looked over the _________ package to try to determine why it was so difficult to find the source of the problem. The problem was that the line number reported when the job failed was line 326, which is the Raise command at the end of the __xyz__ procedure.
When someone writes:
exception when others then raise;it causes line number reporting to fail when an unexpected Oracle error is encountered. Furthermore, the line does absolutely no good, because Oracle will automatically raise unhandled errors without that code.
The only thing that code does is cause problems when someone looks for the source of a failure. Without that code, job failures can be located in just a few minutes.
That same code sequence is repeated three times in the _________ package. The problem may also exist in the __abc___... functions that the _______.lookup_xxxl function calls, since no line numbers were reported from there, either. It would be very helpful if you would remove the problem code, and PLEASE instruct everyone on your staff to never use that sequence anywhere.
- - - - - - - - - - - - - - - - - - - - - - end of email - - - - - - - - - - - - - - - - - - - - - -
Now, in addition, you can trap FRM-40735 in your on-error trigger and then display the message found in DBMS_ERROR_TEXT. In fact, you might try the format_error_backtrace from there, too.

DESADV01 E1EDP07 segment per line item causes EDIFACT error

When a Sales Order has the PO Number + Date populated, the subsequent outbound Delivery IDoc (DESADV01) contains a parent E1EDP07 segment for every child line item segment (E1EDP09). For a SO without PO Date, the IDoc is created with a single E1EDP07 with multiple child E1EDP09 segments. This is standard SAP - do you need to code around this?
The first scenario causes an error in EDIFACT mapping, as a limit of 9 RFF segments is allowed (E1EDP07 is a level 1 segment). Partner systems reject this.

Hi,
Segment field should be optional, so check the posting keys in OB41, check the GL account which hit this posting and check the FIeld status in OBC4 and make the segment field as optional.
while posting the transactions you can check in more then Profit center and segment details will be updated in the postings.
try out, this might help. check the new ledger document types also.
Regards,
Padma

Netweaver not showing line number in the error file.

Hi All,
I am working on SAP NetWeaver 2.
I am having a serious problem in here.
What is happening is, In my code there is a Null pointer exception occurring frequently.
In my log file I can see the file in which it is occurring but I cannot see the line no in which the nullpointer exception is coming.
Is there any setting in netweaver which i should turn on to see the line no in which the error is happening.
Thanks in Advance,
Manny

Hi Sam,
Title means workflow title coming in the inbox or mail subject ?
Anyways both the issues can be fixed in the WF itself.
If you want to change the mail subject check your mail step and provide proper variable.
for the workitem text you can change it form the task.
Regards
Bikas

What causes the error "The document could not be saved. There was a problem reading this document

(131)", when trying to save an edited PDF in Acrobat Professional X (10)?
There are no security settings, no password, and no document restrictions in effect on the PDF.
I am the Windows access-control-list owner of the document and also have full-control administrative permissions for it.
Trying to save the PDF with a different name does not eliminate the error message or the overall inability to save the document.

This isn't a security thing at all. It means that Acrobat found something in the PDF which it didn't like - something which is wrong.

Photoshop CS4 for Mac What can cause the error: Plug-in failed to load - NO VERSION

With Photoshop CS4 for Mac I install the Kodak Plug-in DIGITAL GEM Airbrush Professional v2.1.0. When Photoshop starts I get an error:
Plug-ins that failed to load:
   DIGITAL GEM Airbrush Professional v2.1.0 NO VERSION - - from the file “DigitalAIRProv2.plugin”Flash:
   Connections
   Kuler
This plug-in works fine on my Mac Pro with Photoshop CS4 and OS 10.6 but fails on a new Macbook Air.
Reinstalling the plug-in did not make any difference. What can cause this error?

Thanks Chris, That was my first thought too but this same plug-in works on another installation of CS4. This is a Mac installation and the plug-in is Universal so it should work. Is there any other possible cause for this error? Would Photoshop refuse to load a plug-in in a low memory situation?
Also, The Flash extensions:Connections and Kuler are working OK, I just copied a little more out of the System Info report than I needed to.

BYMONTHDAY is causing the error while opening the ics file in outlook when event is exported from SharePoint Calendar

Hi All,
I am trying to parse the SharePoint recurrence data to get the RRULE for the ics file the RRULE parsed works fine for Yearly and Daily but it causes error when opening the ics file for the Monthly and
weekly recurrence recurrence. I have opened the ics file in the notepad and observed that the BYDAY and BYMONTHDAY causes the problem. If I remove the tag the file opens fine but with wrong recurrence pattern.
Any help will be appreciated.
Regards
Ajeet
Ajeet

Ajeet,
I see that this is an extremely old post, but I thought I would refresh it with a bit more info.
I wish I had found this post a few days ago. I realized the same thing as well. I don't quite understand the reasoning behind requiring the by day date must be the same as the event date. Another thing with rrecurrence is that if
you pick a day of the week for a recurrence (i.e. Friday), then the start date must also occur on a Friday (I am just casting it as the first Friday of the month).
I have come into this same issue with the BYMONTHDAY. I am currently working on trying to configure an .ICS file to allow for multiple monthly recurrences, but it appears Outlook does not support multiple days within an event (determined by trying
to create an even in Outlook and picking the recurrence option). It seems that you are only allowed to have an event on (for example) every Friday of each month, or the (x) day of each month. You cannot set any other occurrences of any other day
within the same ICS file. Hopefully someone else will find this information useful.
Cheers,
Tracy

Fragmenting causes the error nQSError: 14023

Hi,
I have a fact "Sales" and three dimensions - Time, hierarchy and SalesAgent.
I have a report which is running and generating SQL.
I need to fragment the fact based on the key in hierarchy table. The moment I put the fragmentation content, I get the error
Expression 'USD_PRICE:[DAggr(BackLog.USD_PRICE by [ ] )]' converted to NULL because [nQSError: 14023] None of the fact sources for USD_PRICE:[DAggr(BackLog.USD_PRICE by [ ] )] are compatible with the detail filter []..
Can anyone please suggest a solution?
Thanks

Hi,
Thanks for the response.
In the Fact I have two LTS. One is SRS_CO_BACKLOG_SP_FD_A and other is its Alias SRS_CO_BACKLOG_SP_FD_A_ALIAS.
In physical layer I have same joins for both.
For both the facts I have set the Time at month level (Time has hierarchy from year to day). For both the facts I have set Sales Hierachy at Level 6 (Sales hierarchy has values from L0 to L6) and for sales agent I have set it at the sales Agent key.
For fragmentation I am using a column from the sales hierarchy : for first fact SEc_LEVEL = 'Territory' and in another fact SEC_LEVEL='AGent'. In the report I am using month filter.
Regards,
Vin

Need help in finding the root cause the error 'Could not find function:'

Hi fokls,
In my workflow notification , when I click on the notification to process it , it says ' 'Could not find function:' error.
I found the this message is coming out from the Fnd_new_messages table from the message_name 'FND_FUNCTION_NOT_FOUND'.
Here are my questions ...
1. FND_FUNCTION_NOT_FOUND - Is it a oracle Seeded message ?
2. If so the error I am getting is a oracle product Bug ?
And In between , I am getting this error for few transaction only. ( out of 100 , i am getting this error at the rate of 5 per 100 ... or less)
3 .If its a oracle product bug then , how is 95 out of 100 transaction are succssfully wokring ?
4. If is a custom bug , how it os not though for some other 95 transaction ?
5. Can I expect it as Data issue ? If so what kind of data issue.
Folks , any kind of info will be really , realy helpful for me ... please let me know your inputs for me.
Thansk to all in advance
Raghu

In the error message 'Could not find function:' after colon what function name it is giving.
'FND_FUNCTION_NOT_FOUND' is a seeded message only.
As you are saying the error was throwing only for 5% or less notifications, is the error throwing for same kind of notifications? I mean the item type and message are same for these erroneous notifications?
It can be that some function in particular type of workflow is error-ed out does not exists, when responding to those kind of notifications it might be throwing error.
Please check that.
Edited by: sarojak on Nov 12, 2010 6:16 AM

Too many jars cause the error "the input line is too ling"

Hi, Friends,
For some good reasons, I received a lot of jar files (25) and I have to include them in my classpath.
Now I have a problem. When I use javac or ant, I got
The input line is too long.
The syntax of the command is incorrect.
I don't know if the only solution is to extract classes from those jars and put the class root location in the classpath. I don't like this solution.
Thank you for your help?
Youbin

I did try using jre/lib/ext but it looked like I'd
have to put all the jars there -- i.e. even ones that
were in the classpath did not seem to be found unless
they were in the ext dirsctory. This may be a windows
quirk, but again, it is what I am stuck with for right
now.You mean that if you put one jar in lib/ext, then no jars outside of it are recognised? I've never heard of that before - it doesn't happen on any Windiws platform I've ever used.
I should warn you that I had a problem last week that seemed to come down to having unnecessary jar files in lib/ext - If you have an application that uses its own version of a particular jar, but there is a different version of the jar in lib/ext, the one in lib/ext is the one that gets used (I think its to do with class loaders deferring to parent class loaders) - not sure how often the problem occurs (I've never seen it before), but keep it in mind if you get any new problems coming up.
I don't know exactly what you're supposed to use lib/ext for, but I assume its intended as a place to put extensions to the core API and nothing else.

Form debugging - Which line is causing the error?

Similar Messages

Maybe you are looking for