Form doesn't exist

Hi all,
In Smartforms .....Enter the Smartforms T-code in command field , and select the Form Radio button and Press F4, we will get all the forms.
In that list ANLAGE03_V, ANLAGE04_V....etc are available.
But when i select the ANLAGE03_V (or any other form which starts with ANLAGE04_V ) and press Display , i am getting Error message like
form or text ANLAGE03_V doesnot exist
Why i am getting like this ?
Thanks in advance
KR

hi,
Now they may not available in the database because of that your getting error message like that, previously they might be there after that those had been deleted.
reward points if useful,
seshu.

Similar Messages

Form doesn't exists after calling driver program

Hi,
     I had created a invoice form, and i called through driver program in se38.After executing i m getting as 'Form doesn't exists'.
'zinvoice1'   is the name of the smartform.
Code as follows:
REPORT ZINVOICE1.
tables: kna1,vbrp,vbrk.
parameters: p_kunnr like vbrk-kunag,
            p_vbeln like vbrk-vbeln.
data : fm_name type rs38l_fnam.
data: t_vbrp like standard table of vbrp,
      t_vbrk like standard table of vbrk.
data: fs_kna1 type kna1,
      fs_vbrk like line of t_vbrk,
      fs_vbrp like line of t_vbrp.
start-of-selection.
select single * from kna1 into fs_kna1
       where kunnr eq p_kunnr.
select * from vbrk into table t_vbrk
        where kunag eq p_kunnr and vbeln eq p_vbeln.
select * from vbrp into table t_vbrp for all entries in t_vbrk
         where vbeln = t_vbrk-vbeln.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
    EXPORTING
      FORMNAME                 = 'zinvoice1'
    VARIANT                  = ' '
    DIRECT_CALL              = ' '
   IMPORTING
     FM_NAME                  = fm_name
EXCEPTIONS
    NO_FORM                  = 1
    NO_FUNCTION_MODULE       = 2
    OTHERS                   = 3
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION '/1BCDWB/SF00000050'
EXPORTING
    ARCHIVE_INDEX              =
    ARCHIVE_INDEX_TAB          =
    ARCHIVE_PARAMETERS         =
    CONTROL_PARAMETERS         =
    MAIL_APPL_OBJ              =
    MAIL_RECIPIENT             =
    MAIL_SENDER                =
    OUTPUT_OPTIONS             =
    USER_SETTINGS              = 'X'
      IM_FS_KNA1                 = fs_kna1
      IM_T_VBRP                  = t_vbrp
IMPORTING
    DOCUMENT_OUTPUT_INFO       =
    JOB_OUTPUT_INFO            =
    JOB_OUTPUT_OPTIONS         =
    TABLES
      IM_T_VBRK                  = t_vbrk
EXCEPTIONS
    FORMATTING_ERROR           = 1
    INTERNAL_ERROR             = 2
    SEND_ERROR                 = 3
    USER_CANCELED              = 4
    OTHERS                     = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
FORMNAME = 'ZINVOICE1'
VARIANT = ' '
DIRECT_CALL = ' '
IMPORTING
FM_NAME = fm_name
EXCEPTIONS
NO_FORM = 1
NO_FUNCTION_MODULE = 2
OTHERS = 3
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL FUNCTION fm_name
EXPORTING
ARCHIVE_INDEX =
ARCHIVE_INDEX_TAB =
ARCHIVE_PARAMETERS =
CONTROL_PARAMETERS =
MAIL_APPL_OBJ =
MAIL_RECIPIENT =
MAIL_SENDER =
OUTPUT_OPTIONS =
USER_SETTINGS = 'X'
IM_FS_KNA1 = fs_kna1
IM_T_VBRP = t_vbrp
IMPORTING
DOCUMENT_OUTPUT_INFO =
JOB_OUTPUT_INFO =
JOB_OUTPUT_OPTIONS =
TABLES
IM_T_VBRK = t_vbrk
EXCEPTIONS
FORMATTING_ERROR = 1
INTERNAL_ERROR = 2
SEND_ERROR = 3
USER_CANCELED = 4
OTHERS = 5
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.

ORA-01041: internal error. hostdef extension doesn't exist in forms 10g

While Compiling the forms 10g I'm getting this error, pls help me on this problem.

Check this link... ORA-01041: internal error. Hostdef extension doesn't exist
hope this helps

I am having a hard time with a page that is working for everyone else. When I click on anything in the site I get a message that says "The page you were looking for doesn't exist." This is happening on both my ipad 2 and my iphone 5. I cleared my cache

When I click on anything in the site I get the message " The page you were looking for doesn't exist." This website works for everyone else, but not on my iPad 2 or iPhone 5. I cleared my cache and history on the iPad, but it still isn't working.

I live in Germany and my credit card is in my native country of Holland .. then it
doesn't accept my credit card.
Your first statement explains the second statement. To use the German iTunes Store, you need to prove that you're a resident of Germany (that is required by the content owners who will not allow cross-border sales) and the only way Apple can provide such a verification is by requiring that you enter in either a German credit card or a German-purchased iTunes prepaid card. Since I presume the former is not a possibility, you'll need to do the latter if you wish to purchase content from the iTunes Store. Again, this is not Apple's choice but is forced on them by the content owners as a requirement for Apple being allowed to sell the content. The EU is working on regulations that would force the content owners to allow access pan-EU, but that's still in the works.
You do not need an iTunes Store account to activate and run your iPad, though; at least, I didn't need one for either of my two iPads. If you only want to set up an account so you can get free iPad apps, take a look here:
http://support.apple.com/kb/HT2534
Read the steps carefully as the order in which you follow them is apparently critical. This seems to come and go, or only apply to App Stores in specific countries, so you may not see the option for "None" when asked for a payment type.
As to the German iTunes Store in English, you can comment to Apple on that via their feedback pages:
http://www.apple.com/feedback
Regards.
P.S. Regarding "this is the only place for a complaint and that will no doubt get removed because
I'm not full of happy joy sparkles.
As stated in the terms of use to which we all agreed, this isn't a complaint forum, it's a technical support forum. You don't have to be full of "happy joy sparkles", but posts that are nothing but complaints may indeed be removed. If you want to complain to Apple, use the feedback pages.
Message was edited by: Dave Sawyer

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

Attempting to upgarde itunes and I get an error message looking for "an alternate path to a folder containing 'iTunes.msi' location. I've searched my hard drive and the file doesn't exist. What to do?

This worked...found on a prior discussion:
Download the Windows Installer CleanUp utility from the following page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page)...
http://majorgeeks.com/download.php?det=4459
From the link above (near the top of the page)....Under 'download locations' click on 'download@majorgeeks'
To install the utility, doubleclick the msicuu2.exe file you just downloaded and ran.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
Restart your computer.
Re-download Itunes (latest version form Itunes website) and install. It worked!

Build error 'CFURLGetFSRef failed - maybe the output directory doesn't exist?' Eclipse

I downloaded and installed the Adobe InDesign Plug-in Editor as an Eclipse distribution, the InDesign SDK and XCode on my iBook G4 with Mac OS X 10.4.10. Creating an InDesign project works fine. I only have to drag-and-drop elements on a form and add some actions.
Unfortunately, I can't get the Ant Build working. I followed the video-tutorials on the Adobe labs site, but I'm still getting this error:
CFURLGetFSRef failed - maybe the output directory doesn't exist?
The error seems to be in the "/Adobe InDesign CS3 Products SDK/devtools/bin/odfrc-cmd" file. I guess it's a SDK problem.
Does anyone know what the reason is for this error? And maybe how I can fix it?

This is the full output.
"Ld "/id5sdk/build/mac/prj/build/InDesign en InCopy plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign and InCopy plug-in" normal ppc
cd /id5sdk/build/mac/prj
/usr/bin/g++-4.0 -o /id5sdk/build/mac/prj/build/InDesign\ and\ InCopy\ plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign\ and\ InCopy\ plug-in -L/id5sdk/build/mac/prj/../debug/sdk -L../../../build/mac/debug/packagefolder/contents/macos/libs -F/id5sdk/build/mac/prj/../debug/sdk -F../../../build/mac/debug/packagefolder/contents/macos -F../../../build/mac/debug/packagefolder/contents/Frameworks -filelist /id5sdk/build/mac/prj/build/InDesign\ and\ InCopy\ plug-in.build/Default/Debug.build/Objects-normal/ppc/InDesign\ and\ InCopy\ plug-in.LinkFileList -lPublicPlugIn -framework InDesignModelAndUI -framework Carbon -framework InDesign\ and\ InCopy\ plug-in -arch ppc -Wl,-single_module -install_name InDesign\ and\ InCopy\ plug-in.InDesignPlugin/Versions/A/InDesign\ and\ InCopy\ plug-in -Wl,-Y,1455 -dynamiclib -mmacosx-version-min=10.4 -Wl,-Sp -Wl,-executable_path -Wl,../../../build/mac/Debug/packagefolder/contents/macos -isysroot /Developer/SDKs/MacOSX10.4u.sdk
ld: can't locate framework for: -framework InDesign en InCopy plug-in
/usr/bin/libtool: internal link edit command failed"
Anyone who can help me?

SOLUTION MANAGER- alert doesn't exist or not accesible now

I execute transaction solution_manager and I chose productive system in the User defined Alert I created alert "Erroneous Fax & e-Mail (client 300)" and I copy in the Alert long name MTE name which I obtained form rz20 source monitoring system and ... so on
It sould work but in one system I received "alert doesn't exist or not accesible now"
Can somebody help
Thanks

Hi,
Can you provide me the solution for this issue. Even i am facing the same issue while configuring the solution manager monitoring set up.
Thanks in Advance
Suresh

Itunes authorization for an account that doesn't exist?

My new MacBook is asking for an Itunes store authorization for a particular song under an account name that doesn't exist. My apple ID is an old e-mail address; I've already successfully authorized the computer to play songs from that account, into which I can log in with no difficultly. The account name that is supposedly attached to this song is a newer e-mail address (maybe I unsuccessfully tried to change the Apple ID at some point?), but when I click on "forgot password" in the authorization window, it says that the account for which it had prompted me to authorize doesn't exist. Suggestions?

Click here and fill out the form for assistance.
(34501)

Calendar Procedure doesn't exist

Hi All;
I am new to Oracle Portal and have been assigned the responsibility of investigating the feasibility and use of O.P. for my group. Being new to the application I thought that implementing a calendar would demonstrate a useful tool to my group and expand my knowledge and abilities for Oracle Portal. After struggling through the typos in the tutorial (thanks in a great part to this discussion group the solution not the typos). I have once again run up against a roadblock After adding in the link code and then adding in the button I receive the following error when I select the button to bring up the data entry form.
NSSOIM.wwv_app_module.link: PROCEDURE DOESN'T EXIST
DAD name: portal30
PROCEDURE : NSSOIM.wwv_app_module.link
URL : http://gr-bambino.gr.hp.com:80/pls/portal30/NSSOIM.wwv_app_module.link?p_arg_names=moduleid&p_arg_values=1215421501&p_arg_names=_sessionid&p_arg_values=&p_arg_names=EVENT_START_DAT E&p_arg_values=%23sysdate&p_arg_names=_event_start_date_cond&p_arg_values=%3D&p_arg_names=_show_header&p_arg_values=YES
PARAMETERS :
The code I have entered is:
1) the link and intial load of the calendar:
select
E.event_start_date the_date,
E.event_title the_name,
null the_date_link,
'NSSOIM.wwv_app_module.link?p_arg_names=moduleid&p_arg_values=1215421501&p_arg_names=_event_id_cond&p_arg_values=%3D&p_arg_names=_show_header&p_arg_values=YES'| |E.EVENT_ID| |' ' the_name_link,
null the_target
from NSSOIM.events E
order by 1
2)The code for adding the event button:
htp.formOpen(owa_util.get_owa_service_path| |'NSSOIM.wwv_app_module.link?p_arg_names=moduleid&p_arg_values=1215421501&p_arg_names=_sessionid&p_arg_values=&p_arg_names=EVENT_START_DA TE&p_arg_values=%23sysdate&p_arg_names=_event_start_date_cond&p_arg_values=%3D&p_arg_names=_show_header&p_arg_values=YES');
htp.formSubmit (null, 'New Event');
htp.formClose;
In both cases I have
"NSSOIM.wwv_app_module.link?" the missing file. Is it, the missing file, in another schema (e,g, portal30...) and if so do I need to copy it to my NSSOIM schema?
One other proble, now that I have your ear(s)..... when I do start the calendar the background and the added button show on the screen, but instead of a calendar being displayed I see a listing of the select SQL code. Is there something I can do about this... or am I correct in assuming that once I have at least one event in the database that I will see the calendar.
Sorry for the long note, but I wanted to present all the info I had at hand.
Thanks in advance for your help;
Ken
null

Para hacer links lo mejor q puedes hacer es incluirlos en la seccion de "aqadir html" en el formateo final, o usar html portlets, asi te complicas menos la vida y no tienes q enredar con los packages

I've forgot my password for icloud but the account doesn't exist anymore

I've just bought an iphone 6 and i made a new apple id because i forgot the password to my old account but the email doesn't exist anymore for the icloud account so i cant even reset the password, ive used the back up from my iphone 5 on my iphone 6 which had find my iphone turned on so i can't restore my iphone 6 untill i turn it off which i cant because i have forgot the password and the account no longer exist what can i do ?

Ok. In that case you'll have to contact the Apple account security team for your country and request assistance changing the password for the old ID: Apple ID: Contacting Apple for help with Apple ID account security. You'll have to prove your identity to them before they will change it. If your country isn't listed, contact iTunes store support for help with this by filling out this form: https://www.apple.com/emea/support/itunes/contact.html.

If I try to log in to my Hotmail account in Firefox, Hotmail says my Hotmail account doesn't exist, while I can problemlessly log in in other browsers

When I open Hotmail in Firefox and try to log in, Hotmail says my account doesn't exist. But I can problemlessly log in in other browsers, so I'm sure there's no problem with my account. Further, I'm absolutely sure I didn't misspell anything. Before this problem occured, I've always been able to log in to my Hotmail account in Firefox. I've already tried clearing my cookies and history, but it still doesn't work.

Do you have stored any form fill data or passwords for live.login.com?
Use these steps to remove saved (form) data from a drop down list:
#Click the (empty) input field on the web page to open the drop down list
#Highlight an entry in the drop down list
#Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Which security software (firewall, anti-virus) do you have?

Hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder go it says this file doesn't exist. can some1 plz help?

hi when i open my application folder, all the application is shown in trash folder. when i click the application it says this app is in trash first move it out. and when i try to open through finder> go it says this file doesn't exist. can some1 plz help? how can i put all my application through application folder?

Something really odd is going on. In your first screen shot, I noticed that the Applications folder does not have the proper icon displayed in the side bar. Also, in the title bar it lists it as Applications 08-59-29-909.
Not sure where it's picking up that odd name, unless it's because it's still truly within the Trash folder.
Try this. In the Finder > Preferences > General > turn on "Always open folders in a new window". (I have a feeling you have the default setting with this off).
Now, in Finder > Go > move down and open the Applications Folder from there. Now open the folder where you see all your applications that you show in your screen shot, select all, and move them to this true appliactions folder.
This is what you should properly seeing (but with different apps listed):
See how the Applications folder has the icon of the letter A shaped with a pencil, ruler & pen.

Adding T-code to Role Area Menu which doesn't exist in box

Hello,
We are using a SAP system called QIM which has "jumplink" functionality, which is a web based linked (NWBC) which will launch you into a ERP system transaction when clicked. For example, in QIM we will display a outbound delivery, and if we click on the link it launches VL03N from the ERP system and displays as web UI.
In PFCG under area menu, this transaction code appears under the menu, but VL03N doesn't actually existing in the system... The issue is we created a custom object for inbound delivery and we need ot add it under this area, but when we attempt to add a transaction code under the Role Area, the system says the t-code doesn't exist... Even when we try this with an existing t-code showing in the menu (Vl03N) it says it doesnt exist. Same if we look at the authorization object S_TCODE. These t-codes exist in here, but when you try to readd them they system says it doesn't exist.
Please find the attachments with some screen shots... Any idea how we can do this?

You can create a role menu as remote enabled remote menu.
The authority checks will happen on the remote side, also against objects which don't exist in the calling system as the music is on the other side.
On the RFC client system side, you only need the parameter transaction to start the remote transaction in the remote system.
See the documentation on SYST function module ABAP4_CALL_TRANSACTION.
This is however a rather antiquated technology... it is more popular to use a SAP Portal or webdynpro applications for this sort of thing (the user does not notice the difference) or later versions of such integration such as Fiori UIs or imbedded links within the Business Client.
I don't want to lean out the window too far, but the buggy phase of these new things is approaching an end and they are usable if you are on newer releases. Then you can pool the menu and use APIs for navigation and no more irritating S_TCODE checks.
Cheers,
Julius

How to deauthorize a computer , that doesn't exist anymore?

I unisnstalled windows , and for some reason when i inserted my ipod to the freshly installed windows+itunes , and logged on my account , iTunes said , that its a new computer and asked me to authorize it , and so i did.
My question is: how can i deauthorize my old version of windows , that doesn't exist anymore?
I also have another question in this topic : When i want to buy items from itunes from a new device , it asks for my bank card number , and takes 1-2 dollars from it. Is this ok?

Take a look at this Apple support article; it may help:
One computer using multiple iTunes Store authorizations
When i want to buy items from itunes from a new device , it asks for my bank card number , and takes 1-2 dollars from it. Is this ok?
I'm not sure what you mean by this. What "items"? If you are referring to music, videos or movies, you get only one download per purchase, so if you buy the items again, whether from another device or the same one, yes, you will be charged again. Only apps allow redownloading without additional charge.
Regards.

Error trying to relate tables "...either doesn't exist or doesn't have a relationship to any table available in the current context"

I have two tables;
The first is my Order table which has a single row for each unique order - there are no duplicate order numbers.The order id column here is called
OrderID.
The second is my Submissions table which is similar to a transactions table, there are multiple submissions for every order. This table also contains an
OrderID column that contains the relevant OrderID.
The submission table also contains a calculated field called Date and a calculated field called
MaxDate field which is the date of the most recent submission that relates to any particular order in cases where there are multipple.
My goal is to add a column to the Order table this MaxDate column. The reason for duplicating the information rather than linking the tables is because I need to create more calculated columns in the
Orders table based on this value.
I have created a relationship between the two tables however when I use:
=RELATED(Submissions[MaxDate]
I get this error:
"...either doesn't exist or doesn't have a relationship to any table available in the current context"
I don't really understand why this would be, because MaxDate definitely exists and contains only numerical values. What is more strange is that if I try and combine the data through a pivot table it actually works! I can create a pivot with OrderID in the first
column and then associate it with MaxDate from the Submissions
table as the value.
Can anyone help me understand what is the problem here?
P.S. if it is useful the formula I'm using to calculate the MaxDate is:
=MAXX(FILTER(Submissions,Submissions[OrderID] = EARLIER(Submissions[OrderID])),[Date])
Thanks.

Maracles, is this still an issue?
Thanks!
Ed Price, SQL Server Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

Form doesn't exist

Similar Messages

Maybe you are looking for