Form in flash, tab goes off form

Sorry - I really feel at a loss here as there is nowhere I
can find to set up a control for the order in which you can move
from one field to another. But as I test my form, and tab from one
field to the next - the cursor goes from first to second field,
then off the form to the menu bar, tab again and you end up in the
third field of the form, tab again and you go off form to the next
option on the menu bar, tab again and you go back to the last two
fields in the form. What can I do to keep the cursor in the form
going from one field to the next? PLEASE!?

Good Morning Rob...and thanks for your prompt reply.
In this instance it is for lets say a unique picture frame system I am hoping to offer on line. I am needing to create a page on the website where someone can enter the sizes they want in boxes. The sizes are by definition NOT static...that is the point of course. I would imagine they might be linked to an external data base however I have been teaching myself all manor of website design just to make my own website so I suppose the key numbers could be written into the website and changeable by me thus not requiring and external document though that sounds like possibly a good idea. However, the math must be done for the user in real time on the open active website. These boxes would be linked to a calculation which would return to them the price for what they are wanting based on the dimensions they entered. I would of course want to have control of the price per "X" (height, width, length, etc.) so if and when that changes I can simply change those behind the scene numbers and the math goes along its merry way as usual. In other words this is DATA 101 in Excel for example but I don't know how to go about setting something like this up in FLASH....or prior to your answer, if it was even possible. No link to inventory is required. This really should be simple stuff....assuming one knows where to look to find out how to do it. I have combed Lynda.com and can't find instructions on how to do this. I have seen this exact thing on other picture frame websites but I think those are Dreamweaver based websites.
Anything you can do to point me in the right direction would be appreciated.
Thanks for your time Rob.
Chip

Similar Messages

When saving a file in Indesign the tab goes off the top of the page

Having trouble with dragging the size of the artboard window and when I save a document the top of the tab goes off the page?

Thank you for responding. Below is some info.
Please see the clipping on the "d" in Pastel Bond and White Bond and the rounded part of the "R" in 2 &3 Part NCR. We have had this happen on occasion with other files as well. Thanks for the help.
save as > photoshop PDF
First dialogue box:
Save: layers (checked)
color: embed color profile: U.S. web coated (SWOP) ...
Second dialogue box: high quality print
options: none checked
viewing PDF in preview on mac

Is there any way to keep the flash from going off when you receive a text or other notification?

I have an iphone 4s. Is there any way to keep the flash from going off when you receive a text or other notification? I keep it next to my bed at night and keep thinking there is lightning when something comes thru. LOL

Go to Settings>General>Accessibility and turn LED Flas for Alerts to Off.

X230 Coating goes off / forms bubbles on edges

Hello!
I have bought my thinkpad x230 about 1 year ago. After a few months the corners lost its coating, which I assumed is quite normal (although I really, really pay attention to the notebook (always in sleeve or in docking station, if it's not used, etc, etc)).
But for a few months now, also the coating on the lid edge partially goes off AND is forming myterious bubbles (please see the attached picture(s)).
My question now: Is this a production error and I maybe get a new coating or do I have to live with this quality issue?
- betatester
http://imageshack.us/a/img28/4315/acz9.jpg
http://imageshack.us/a/img706/3964/ykz2.jpg
http://imageshack.us/a/img202/2268/oq77.jpg

Yeah, true that.
But I have no idea, where this should come from....the notebook stands on my desk in my living room, gets into my Crumbler bag (http://ecx.images-amazon.com/images/I/31lHMJjlnoL._SY300_.jpg), then out of it at work and vice versa....
hmmm???

Calling a form in a tab from another form in another tab, same page

I've created a page with three tabs and a different form for each tab, then
I've placed a button in each form to call the following form, using this code:
htp.formOpen('PORTALORACLE.wwa_app_module.link?
p_arg_names=_moduleid&p_arg_values=1544154288&
p_arg_names=_show_header&p_arg_values=YES&
p_arg_names=id_dip&p_arg_values='||to_char(v_id_dip)||'&p_arg_names=_id_dip_cond&p_arg_values==', 'post');
htp.formSubmit(NULL,'next form');
It works fine but loads a new page for each form instead of switching the tabs.
How can I get it works as intended?
thanks for the help
Alessio

If I have got your requirement correct, then this is what you are looking for :-
1> you have 3 forms, one in each tab
2> there is a button in a form in tab1 and when you click the button, the information entered in the form in tab1 will be passed to the form in say, tab3, and page with tab3 should be shown.
This is possible. You need to write some pl/sql code to get this done.
Portal provides a placeholder object called wwsto_api_session. The methods of this object will enable you to set and get values.
The general steps would be :-
1> for the form in tab1, write pl/sql button handler code for the button to set the form inputs into the wwsto_api_session object
2> Use form's Call/Go feature to call/go to the URL of the page's 3rd tab;
3> for the form in tab3, write pl/sql code in the additional pl/sql section (...before displaying the page) to get the values from the placeholder object and use it in the form.
The usage of wwsto_api_session placeholder object is available in the following Discussion Forum post :-
Re: session state security

Form going off screen

Hi all, new to flex and having what is probably a very simple issue.
I have my s:Application.
In here is an mx:Panel
in the panel is an mx:Form filled with mx:FormItems, including s:DropDownLists, s:TextInputs and s:TextAreas.
My Panel and form appear to be going off the bottom of the window. I was expecting the panel to stop at the bottom of the window and a scroll bar appear but it doesnt.
If i set a height value in the Panel of say, 100, a scroll bar does get rendered. I thought the obvious solution then was to apply height="100%" to the panel and form but this doesnt change anything and it still goes off the screen. I've also applied Bottom values but that doesnt stop it going off screen.
The application has width and height of 100% set, and a VerticalLayout. can someone tell me how to stop stuff going off the bottom of the window? I'm sure it must be something simple but google doesnt help!
Thanks
Steven

OK So I've stopped the problem but am not going to mark it solved yet because I still have a question. I set the Panel to layout="Absolute" and that fixed it. Why does "vertical" let the panel go off screen and not bring up a scroll bar, do you always have to use Absolute?
Also, using s:Panel causes the problem regardless of what layout I apply, why?
Thanks

Report link to Form in another tab.

Basically I have a chart with a link. The link on the chart links to a report and in this report there is another link that links to a form. When you click on the link in the report that leads to the form it brings the form up in a new window. This same form is on another tab of my portal page. I want to know if it's possible for that link to lead to the form under the tab the form is on.
Now after I have said that I hope that isn't too confusing lol...
So let me try to sum it up even further lol... I want to make a link link to another tab on my portal page.

Going to try to clear this up even further.
I have a portal page with three tabs on it. The first tab has a bar chart with technician names that act as a link to a report. The second tab has a form for inserting, updating, and querying open tickets. The third tab just has an advance search feature that displays a report.
When the technician clicks on their name it takes them to a report that only displays their open calls. On this report that comes up there is another link that when clicked on brings up a new window with the form from the second tab on it. What I'm trying to do is make that link from the report use the form from the second tab and not a new window.

Spry Tabbed Panles and forms

Hi,
I am having a problem with my code. My goal is to have a unique form across different tabs.
Basically I want the user to send the entire information clicking only one button that is located outside the tabs.
My first taught was
<div>
<form id="form1">
<div>
<input type=""... name=""
</div>
<div>
<input type=""... name=""
</div>
</form>
<input type="button" value="send" onClick="send()"/>
were send is simply
function send()
document.getElementById("form1").submit();
That code didn’t worked because every time I opened a div in which a part of the form was inserted it performed the form action (specifically it goes to the .php page that collect the information)
Then I tried
<div>
<div>
<form id="form1">
<input type=""... name=""
</form>
</div>
<div>
<form id="form1">
<input type=""... name=""
</form>
</div>
<input type="button" value="send" onClick="send2()"/>
Where now the function send2 is
function send()
document.getElementById("form1").submit();
document.getElementById("form2").submit();
Also this strategy did not worked because was sending only the second (or first i did not remember exactly) form.
So I ended up switching to a function i found on the net the was collecting all the forms in document to one and post it
function submitAllDocumentForms() {
var arrDocForms = document.getElementsByTagName('form');
var formCollector = document.createElement("form");
with(formCollector)
method = "post";
action = "liveit.php";
name = "formCollector";
id = "formCollector";
for(var ix=0;ix<arrDocForms.length;ix++) {
appendFormVals2Form(arrDocForms[ix], formCollector);
document.body.appendChild(formCollector);
formCollector.submit();
/* Function: add all elements from ``frmCollectFrom´´ and append them to ``frmCollector´´ before returning ``frmCollector´´*/
function appendFormVals2Form(frmCollectFrom, frmCollector) {
var frm = frmCollectFrom.elements;
for(var ix = 0 ; ix < frm.length ; ix++)
frmCollector.appendChild(frm[ix]);
return frmCollector;
This way worked perfectly but has a visually very bad outcome: when I click send it shows for a fraction of second all the checkboxes (that are present in all the different tabs) at the bottom of the screen.
At that point I called a second function in the send button that creates a fake div just to push down the horrible checkboxes that were showing. Obviously that creates a scroll bar that resize my page and has an even worse effect.
Do you have any suggestion?
Thank you very much, and excuse me for my bad English

I was able to figure it out by myself.
I just needed to erase the line
document.body.appendChild(formCollector);
in order to not show the the ugly form that was collecting the data from the other forms.

Contact form with Spry 'Tabbed Panels' and 'Validation TextField'

Hello
I am considering making a form using Spry tabbed panels (as step 1, step 2, etc.) and the form validation to process name, email, address, credit-card, accept terms and conditions, etc.
This is instead of a multi-page form, because there could be security flaws there (i.e. passing sensitive information from one page to the next) and it would take longer for the user - needing to open each page, etc. where this is to be used as a buy form (for a single product), sort of like one-click order (but not exactly).
Overall, it seems like a good idea, someone else has tried it, but I do have some questions that haven't been covered there - relevant for anyone that'd ever want to do this with Spry - that didn't come up there:
1. Will it degrade gracefully, and still work? For example, when you turn JavaScript, CSS, images, and other things off?
2. Is it possible to go from Step-to-Step (using the top tabs, or 'Submit' and 'Back' buttons added on the bottom) without entering all of the required information? Because I would like to disable this - perhaps also have the future Steps grayed out and un-clickable.
3. Is it safe to use this form to enter credit card details, and then email those to the website's account? I am new to SSL, so I'm not sure if I could implement some security feature here? Where should I look?
4. Does it load the page fast, despite having multiple steps all pre-loaded? Can we make subsequent steps require some 'loading' (without refreshing the page)?
5. If it doesn't do either of these, how could we make it do that?
I hope to hear from you!

Hello
I am considering making a form using Spry tabbed panels (as step 1, step 2, etc.) and the form validation to process name, email, address, credit-card, accept terms and conditions, etc.
This is instead of a multi-page form, because there could be security flaws there (i.e. passing sensitive information from one page to the next) and it would take longer for the user - needing to open each page, etc. where this is to be used as a buy form (for a single product), sort of like one-click order (but not exactly).
Overall, it seems like a good idea, someone else has tried it, but I do have some questions that haven't been covered there - relevant for anyone that'd ever want to do this with Spry - that didn't come up there:
1. Will it degrade gracefully, and still work? For example, when you turn JavaScript, CSS, images, and other things off?
2. Is it possible to go from Step-to-Step (using the top tabs, or 'Submit' and 'Back' buttons added on the bottom) without entering all of the required information? Because I would like to disable this - perhaps also have the future Steps grayed out and un-clickable.
3. Is it safe to use this form to enter credit card details, and then email those to the website's account? I am new to SSL, so I'm not sure if I could implement some security feature here? Where should I look?
4. Does it load the page fast, despite having multiple steps all pre-loaded? Can we make subsequent steps require some 'loading' (without refreshing the page)?
5. If it doesn't do either of these, how could we make it do that?
I hope to hear from you!

Is there a way to create form fields to tab into and type and or drop down selection fields in pages as you can with microsoft word?

is there a way to create form fields to tab into and type and or drop down selection fields in pages as you can with microsoft word?

No

Cancelled contract lines are populating in the SR form's subject tab when clicking on 'Get Contracts' button

Cancelled contract lines are populating in the SR form's subject tab when clicking on 'Get Contracts' button. But user says, it should not be populated. What could be the reason? Please suggest.
I have told the user :
"In the case of a renewed contract, if the service request is logged during the effectivity of the original contract (which is now Expired), the original contract will be retrieved. If the service request is logged during the effectivity of the renewal contract then only the renewal contract will be retrieved.
Contract Entitlement on Subject tab is based on Contract Start and End dates. All the contracts i.e. expired, active, cancelled will appear until the end date. As we can see the contract ES-10165 is end dated on 09-DEC-2014, hence it will appear on the subject tab as per the functionality."
But the User is saying:
"Contract coverage is clear to be based on dates, and that is quite clear to me as well… the problem comes with the different statuses.
A SR can be associated to an “EXPIRED” contract line because the SR creation date could be falling between coverage line start and end dates, but can never be related to a “CANCELLED” line.
This “CANCELLED” status means that the line is not valid for the contract, so if it is not valid for a contract, it is not valid for referencing a job…and this is only creating wrong costs associations."

Hi Sudhakar,
Drop inline message components for each of the textFields and the textArea and then run the application. You could also use a message list component but inline message components for each of the input components would give you a clear idea if any errors are occuring. In case any such errors are indeed occuring then the situation can be analysed further.
Hope this helps
Cheers
Giri :-)

How to create a comment form in Flash CS3

I am trying to create an add comment form in Flash cs3. I
have the background design and the text input areas and sub mit
buttons. But how do I get the submit button to add the comment to a
different area in the same flash file? My inputs and buttons are on
the left side of the stage and my display comments is on the right
side of the stage. How do I connect the two?

The user types something into a text input space and when the
user then uses the submit button, you want that same, user entered,
text to display in another, different, text area? If that's the
case then make that second text area a dynamic textfield and set
its text property to the text property of the input text
space.

Complete loss of tab order in form

I received a MS Word document (2003) that I opened in my MS Word 2010 and saved as a .pdf document. I then opened the .pdf file in Acrobat Pro v 9.4.7 and used the Forms tools to create a fillable form. My tab order shows exactly as I want it to perform. I close the form.
I can open this form on my computer - using BOTH Adobe Acrobat Pro AND Adobe Reader 9 (v 9.4.7 also) and the form performs exactly as I intend it to.
However, when I have it tested by coworkers, the form tabbing does NOT perform as intended. They are using Adobe Acrobat Pro v 8.1.3 and Acrobat Reader v 9.0.0.
Can anyone help me figure out why this is happening and how I can fix it? Myself and one of our developers have spent hours on this and cannot even get to the root of the problem, let alone resolve the issue.
Thanks!
Susan

George, once again you have saved me much additional grief!! Changing the order to "row order" instead of "manual order" was all it took...although I still don't understand why the end users tabbing order did not match what I could see in the development software. (Perhaps that information would be a bit too much of a Christmas miracle to hope for.)
Thank you so much for your help on this! I now have five other forms to prepare, and your wisdom should help them all go smoothly.
Susan

I have an editable pdf made in Acrobat. Viewing it Adobe Reader Mobile (Android) and I can fill it fine. I want to be able to fill the form but it keeps autosaving. I just want to email the form and then it goes back to an unfilled form. How do i do that?

I have an editable pdf made in Acrobat. Viewing it Adobe Reader Mobile (Android) and I can fill it fine. I want to be able to fill the form but it keeps autosaving. I just want to email the form and then it goes back to an unfilled form. How do i do that?

Currently, Adobe Reader for Android does not provide an option to disable auto-save.
In the Reader home screen (where your files are displayed), you can make a copy of the original PDF document, open the copy (instead of opening the original document), make changes to the copy. Once you email the copy, you can delete it.
For more information, please see Help > How To... > Copy, edit, delete, manage.
Although it is not the most convenient way to accomplish the task, that's the only feasible workaround that is available in Adobe Reader for Android right now.

Is it possible to create a contact form via Flash cs5.5 and package out app for desktop?

I need to create a desktop app for windows. Im using Flash cs5.5 and I wanted to know of an easy to way to create a simple contact form that would work once installed on a desktop/
Thanks guys for any input!

If you want a contact form you can either use StageWebView or HTMLLoader to show an HTML page in your web server with a contact form.
Or you can create the form with Flash textfields and then send the whole thing with a POST request to a PHP script in the server, for example.

Form in flash, tab goes off form

Similar Messages

Maybe you are looking for