Form interface import parameter cannot be used in smartform

Hi,
When I try to use the standard parameter HEADER in a routine in a smartform, I get the error: "HEADER" expected, not "...".
I have put the HEADER definition in the Input parameters of the routine and I have tried other form interface import parameters and I do not get any error with those. So I cannot see why HEADER woudl be any differnt?
Any suggestions? Thanks.

Hi,
Thanks for your reply.
There's a smartform with this definition in the Import tab of the Form Interface:
HEADER TYPE BAPIBUS2000110_HEADER_DIS
I've created a Program Lines routine. In the Input Parameters under the General Attributes tab, I entered HEADER. This is so I can reference the table in the code. However if I do a syntax check, I get the error described "HEADER" expected, not "...".
Hope this clarifies the problem.

Similar Messages

Error in the import tab of form interface with parameter name

Hi Experts,
                in the import tab of form interface i have define the following..
          Parameter Name               type assignment                  Associated Type
         t_vbrk                                    type                                         vbrk
and then in a loop i am using this as follows...
t_vbrl into fs_vbrk
after executing check i am getting the error 'T_VBRK" is neither specified under "TABLES" nor defined as an internal table.'
plz help me out with this.....
why this error is occuring?
thnks n reagrds,
Ashmita

Hi,
U cannot loop the import tab i think....Give tat one in tables statement and execute..
t_vbrk type vbrk in Tables tab...
I think it will solve ur issue..

Private methods Importing parameter cannot be changed error

Hi Guys,
I have this scenario where I have a private method inside a class which is having an error "Field SAPMF02K cannot be changed".
here is the code for the private method call.
    call method create_bdc_dynpro
         importing IM_PROGRAM = 'SAPMF02K'
                    IM_DYNPRO = '0100'.
code of the method
data: wa_bdcdata type bdcdata.
CLEAR wa_bdcdata.
wa_bdcdata-program = im_program.
wa_bdcdata-dynpro = im_dynpro.
wa_bdcdata-dynbegin = at_true.
APPEND wa_bdcdata to at_bdcdata.
Hope you can help
Thanks!

Howdy,
I think you have your importing/exporting the wrong way round.
The method call should be:
call method create_bdc_dynpro
exporting IM_PROGRAM = 'SAPMF02K'
IM_DYNPRO = '0100'.
And of course in the method definition they should be importing parameters.
Cheers
Alex

Smartform import parameter

Hello all, I've created a new smartform with a new import parameter called TOTAL_DATA, which contains several fields. TOTAL_DATA is defined in the smartform global settings>form interface tab as an import parameter. I thought this would make this parameter data available within all smartform nodes. TOTAL_DATA is not a table but a structure.
I've inserted some TOTAL_DATA field references, e.g. &TOTAL_DATA-1_6&, into text nodes within a template node. The smartform compiles correctly but when I test the smartform I get error 'Reference field TOTAL_DATA-1_1 unknown in form'. I inserted the field using the smartform field list window click and drag.
Is there something I need to do to make the import paramter data available in the text node.
Any help much appreciated.
Thanks, Inde

Thanks Subramanian, that's solved my problem. My import parameter was referencing a DD structure with currency fields. The DD reference currency field was not passed to the smartform...hence the error.
I've defined the DD reference currency field as a global parameter for the smartform which fixed my problem. I could pass this in as another import parameter which would also fix my problem.
Many thanks for your help, Inde

SMARTFORMS - Change an import parameter in form interface

Hello everyone,
I don't know if it's possible, but I put some program lines in my smartform to clear some fields if the last page is not reached. The problem is that these fields are from a table that's stated as an import parameter in form interface, which means that data is taken from the program, right?
Am I able to clear these fields anyway? If so, which way?
In my code I'm comparing the systems fields sfsy-page and sfsy-formpages, if they're different I clear the fields, otherwise I don't, actually I did it because the conditions don't get the result as I wish. If I check "only after the end of main window" the whole table doesn't appear in my form and I don't want that.
PS: I didn't set this condition on table, I set it in the text.
Any ideas?
Thanks in Advance.

Hi,
You can do one thing.....create an internal table in the smartform itself....transport those values in this table and display the fields using this table only.
Now if the last page is reached u can use the main table (that is imported from the program). This way the original data is not cleared.
I hope it helps.
Regards,
Shraddha

Importing form data per XML - Using the form interface?

Hi!
I'm developing interactive forms by adobe and I want to import my form data per XML file. The xml file and the email are created by my pdf document.
Now this xml file has to be parsed by a report or something like this.
Is it possible to use the form interface, I implemented, or do I have to parse it manually?
I think it has to work with this interface because it makes the pdf and it "knows" what to import/export.
Am I wrong with my suspicions or can you help me with this problem?
Thanks & greets,
Philip Gillißen

I'm pretty impressed of Adobe and their stuff (I do NOT refer to the community), how helpful they are.
Perhaps I didn't understand the meaning on the offical customer support website, stating:
The best way to contact us...
Ask our experts
Our community and staff are at your service 24/7
Even worst, their is a similar question from 25/09/2013 (http://forums.adobe.com/message/5711946#5711946) and no feedback form Adobe stuff at all.
Great service guys!
Thanks a lot!

How to use import parameter to be instead of SQL where sub-sentence ?

I wrote a RFC to read data from SAP table. To fetch data flexibility, I want to use import parameter xx instead of where sub-sentence in SQL sentence.
   For example, "SELECT * FROM T WHERE XXX", and "XXX" is a importing parameter.
   How can I use it.
   Thanks a lot.
   Frank.

FUNCTION ZRFC_04.
*"*"Local Interface:
*" IMPORTING
*"     VALUE(TARGETTABLE) LIKE MAKT-MAKTX
*"     VALUE(TWHERE) LIKE MAKT-MAKTX
*" EXPORTING
*"     VALUE(ZRETURN) LIKE MAKT-MAKTX
*" TABLES
*"      TMP_TEST1 STRUCTURE ZTEST1
DATA:
TRANSACTION_ID LIKE ARFCTID,
V_VAILD(1) TYPE C,
scond(80) TYPE c.
V_VAILD = 'X'.
GET PARAMETER twhere fields scond.
The error " 'LATE FIELDS' expected, not 'TWHERE FIELDS' " generated.

How to use select-options in the function module of import parameter ?

Hi ...
   I have created a BAPI and tested in SWO1 tcode , by giving the single value for an company code ( BUKRS ) , it executed properly .
Same thing is working after implementing in a program .
so now it is working for fetching a single company code details .
My requirement is : I want to use select-options in program as well as in function module IN IMPORT PARAMETER.
Program :
REPORT ZTEST.
TABLES : T001 , ZBAPI_STR .
TYPES : BEGIN OF TY_ITEM .
          INCLUDE STRUCTURE ZBAPI_STR .
TYPES : END OF TY_ITEM .
DATA :WA_ITEM TYPE TY_ITEM ,
      ITEM LIKE STANDARD TABLE OF WA_ITEM INITIAL SIZE 0 .
PARAMETER : BUKRS TYPE ZBAPI_STR-BUKRS.
call function 'ZBAPI_FMT001'
exporting
    bukrs         = BUKRS
IMPORTING
RETURN        =
tables
    itemtab       = ITEM
IF ITEM IS NOT INITIAL .
LOOP AT ITEM INTO WA_ITEM .
    WRITE : / WA_ITEM-BUKRS , WA_ITEM-BUTXT , WA_ITEM-ORT01 , WA_ITEM-LAND1 .
ENDLOOP.
ENDIF.
FUNCTION MODULE :
FUNCTION ZBAPI_FMT001.
""Local Interface:
*" IMPORTING
*"     VALUE(BUKRS) TYPE EFG_TAB_RANGES
*" EXPORTING
*"     VALUE(RETURN) TYPE BAPIRET2
*" TABLES
*"      ITEMTAB STRUCTURE ZBAPI_STR
SELECT BUKRS BUTXT ORT01 LAND1 FROM T001 INTO TABLE ITEMTAB WHERE BUKRS = BUKRS .
ENDFUNCTION.
Regards
Deepa.

I have given a similiar example which i did
Declare a
Table type:Z_TT_PONUM
Short text : Select options PO Number
in SE11 tcode with row type eg: Z_ST_PONUM
create a structure (this will be the row type)
Structure          Z_ST_PONUM
Short text         Select Options Field PO number
Compenent Compent type
SIGN       BAPISIGN      Inclusion/exclusion criterion SIGN for range tables
OPTION       BAPIOPTION      Selection operator OPTION for range tables
LOW       EBELN                      Purchasing Document Number
HIGH       EBELN                      Purchasing Document Number
In the function module import
give as
I_PO_NUM     TYPE     Z_TT_PONUM     opt pass value Select options PO Number
Hope this is exactly what you want to know.
So you create a structure simliar to mine but the low an high whould be your component
then a table type and then include that in the BAPI.
Then pass your select-option value to this BAPI when you call this BAPI in the program

Adobe form as PDF string in Webservice importing parameter

Hello Experts,
Can you please clarify the below issue.
I have created a webdynpro.
I have placed an interactive form on one of it's view.
And kept one Submit button(Execute type) on the form to trigger one webservice.
This webservice has the importing parameter as the PDFSTRING.
So my requirement is to pass the entire form with filled values to the webservice importing parameter. I will be storing this PDF string in some tables.
What scripting i need to use in the form for getting this done.
Thanks in advance.
Regards,
Ram.

Hi Sai,
Thanks for ur input.
My requirement is not exactly the string with XML data, but the string with PDF data.
I will try to explain my requirement here in detail.
I have the adobe form triggering from the webdynpro. This form has different objects like, text fields, dropdowns, check boxes, radio buttons...etc and one SUBMIT button for which webservice is attached in the properties.
User will fill all the fields and clicks on SUBMIT. When he clicks on the SUBMIT, the webservice should attach the filled PDF document at partner level.
For this purpose, i need the string with PDF data and not the XML.
WIth this PDF string again i should be able to re generate the PDF document which was filled by the user.
If string with PDF data is not possible, Please suggest me the possible way of achieving this?
Regards,
Ram.

Loading bank accounts with invoices using Payables Open Interface Import

Dear Gurus,
We are on 11.5.10.2.
We create invoices in the 3rd party system, then load them into oracle using payables open interface import process.
When users create invoices, they choose Vendor and Site first. If the Vendor Site has multiple bank accounts assigned, users may select the one that is non-primary.
When we load the invoices into Oracle, it finds the PRIMARY account for the particular vendor site, and assigns it to the invoice.
Is it possible to load bank accounts assigned to invoices into Oracle AP?
Many Thanks,
Iana

Hi,
No issues for me on Payables Open Invoice Interface with 12.0.6 - and yes make sure you match up the invoice_id on invoice, lines interface tables.
Regards,
Gareth

How to update an existing supplier using Supplier Open Interface Import?

Hi
I need to updated an existing supplier.
Is it possible to update using supplier open interface import and how?
Thanks in advance.
Thanks,
Mallesh

Hi Atul,
I am using CCM 2.0 and SRM 5.0 (EBP5.5).
We are not using XI, so i guess we cant use the program "/ccm/file_upload".
we have migrated the product master data from R/3.
We have developed a report which takes product category as input and gives out flat file in csv format containg all the items in that prod category.
Then we upload the file in CCM by logging thro the brpwser.
Similarly, i can develop another program which will give me a CSV file foll all those items changed in R/3 in a day.
Then we can upload that file in CCM.
But i have doubt if it will update the existing items in catalog.
Hope I could make myself clear.
Thanks
Abhishek

SSRS countrow Aggregate error(Aggregate and lookup functions cannot be used in query parameter expressions.)

Below expression works fine with text box but gives error in dataset expression.
="SET FMTONLY OFF select "+ join(Parameters!Column.Value,",") +" FROM pamcustom.dbo.vw_HFL_HFD_HotfileData INNER JOIN pamcustom.dbo.HFL_HFB_HotFileBatch on BatchID = HFB_intBatchID where BatchID ="+Parameters!BatchId.Value+"
and "+Parameters!cmbTranType.Value+" "+ iif(CountRows("DS_Aml_Mnr_Iss_Desc")=Parameters!Mnr_Iss_Desc.count," "," and aml_mnr_iss_desc in "+"('" & join(Parameters!Mnr_Iss_Desc.Value,"','")
& "')")+iif(CountRows("ds_ReportingCategory")=Parameters!ReportingCategory.count," "," and ReportingCategory in "+"('" & join(Parameters!ReportingCategory.Value,"','") & "')")+iif(CountRows("ds_NAICSubGroup")=Parameters!NAICSubGroup.count,"
"," and naicsubgroup in "+"('" & join(Parameters!NAICSubGroup.Value,"','") & "')")+iif(CountRows("ds_PortTrading")=Parameters!PortTrading.count," "," and porttrading in "+"('"
& join(Parameters!PortTrading.Value,"','") & "')")+iif(CountRows("ds_GL_LE")=Parameters!GL_LE.count," "," and gl_le in "+"('" & join(Parameters!GL_LE.Value,"','") &
"')")+iif(CountRows("ds_coagroup")=Parameters!cmbCoaGrp.count," "," and coagroup in "+"('" & join(Parameters!cmbCoaGrp.Value,"','") & "')")+iif(CountRows("Portfolio")=Parameters!cmbPort.count,"
"," and portfolio in "+"('" & join(Parameters!cmbPort.Value,"','") & "')")+IIf(IsNothing(Parameters!txtSecID.Value)," "," and secid in ('"+Replace(Parameters!txtSecID.Value,",","','")+"')")+iif(IsNothing(Parameters!minPortFilter.Value)
and IsNothing(Parameters!MinPort.Value)," "," and portfolio "+Parameters!minPortFilter.Value+Parameters!MinPort.Value)+iif(IsNothing(Parameters!maxPortFilter.Value) and IsNothing(Parameters!MaxPort.Value)," ","
and portfolio "+Parameters!maxPortFilter.Value+Parameters!MaxPort.Value)+iif(IsNothing(Parameters!minCoaFilter.Value) and IsNothing(Parameters!txtMinCoa.Value)," "," and portfolio "+Parameters!minCoaFilter.Value+Parameters!txtMinCoa.Value)+iif(IsNothing(Parameters!maxCoaFilter.Value)
and IsNothing(Parameters!txtMaxCoa.Value)," "," and portfolio "+Parameters!maxCoaFilter.Value+Parameters!txtMaxCoa.Value)
I guess the error " Aggregate and lookup functions cannot be used in query parameter expressions." is because I am using CountRow to ensure that if all values of multi select all selected i will not use that filter in where clause.
Pls. guide...

Hi, Include your parameter total count in the dataset for parameter and instead of using countrows() function use the count from dataset in the expression.
Hope this helps.........
Ione

HT1386 Syncing new iphone 5 with a mac with itunes 10.6.3. Error message says iphone cannot be used because requires itunes 10.7 or later. Unable to download Itunes 10.7 mac. What do I have to do to import songs from Mac to new Iphone 5 ?

Syncing new iphone 5 with a Mac with itunes 10.6.3. Error message says iphone cannot be used because requires itunes 10.7 or later. Unable to download Itunes 10.7 to Mac. What do I have to do to import songs from Mac to new Iphone 5 ?

iOS 6 (which runs on the iPhone 5) requires iTunes 10.7, which requires OS X 10.6.8 or higher.
Upgrade OS X on your Mac.

Import text into a form from a tab delimited file using an action

Good evening.
I am using Adobe Acrobat XI Pro
I have been working all weekend so far on this, and have tried many options.
What I am wanting is to import a line of data from an excel file into a form, save the file with a name drived from the form fields, close the new file, then go back to the original file, import a line of data, and so on and so on.
I had all of this working in livecyle with a tool, but now that we are going to Windows 8 and Microsoft Office 2013, the driver that I need to load the excel file into the form is not available--so now I have to redo the forms in Adobe and import using a tab delimited file.
I would like to do this with an action.
Thus far, I have the following.
**Credit goes to George Johnson who helped me with the script to save the file using field names a few months ago**
To start, I have a folder level script
mySaveAs = app.trustPropagatorFunction(function(doc,path)
app.beginPriv();
var myDoc = event.target;
myDoc.saveAs(path);
app.endPriv();
myTrustedSpecialTaskFunc = app.trustedFunction(function(doc,path)
//privileged and/or non-privileged code above
app.beginPriv();
mySaveAs(doc, path);
app.endPriv
//Privileged and/or non-privileged code below
For the Action, I start with the Form file loaded
Then I execute a javascript to import the text into the file.
this.importTextData("/c/data/clerical.txt");
The next step is to save the file using field names as part of the file name
--credit goes to George Johnson who assisted me with this on a similar project a few months ago.
//Get the Field Value
var fn=getField("Last").valueAsString + "-" + getField("First").valueAsString;
//Specify the folder
var fldr = "/c/data/";
//Determine the full path
var fp=fldr + fn + ".pdf";
//save the file
myTrustedSpecialTaskFunc(this, fp);
That is as far as I have gotten.
What I want to do now is load the original form file, import the next line into the form, save the file, repeat.
If anyone could assist me, I would greatly appreciate it.
**note I had to type this from my I-pad because I kept getting kicked off the internet from my computer. I hope my code is typed correctly.

George
Thank you so much for your response.
Yes--there are multiple lines in the data file--it will vary from month to month. It looks like from what you are saying is that I need to do the global variable since it will constantly change, and then increment it as it goes through the text file. When it reaches the end, then it will stop.
I looked at the following links--but this is from Adobe 9 API--I don't know if things have changed with XI--especially since 9 used batch processing and XI has actions.
Count PDF Files
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
Global counter
http://help.adobe.com/livedocs/acrobat_sdk/9.1/Acrobat9_1_HTMLHelp/wwhelp/wwhimpl/js/html/ wwhelp.htm?href=JS_API_AcroJS.88.1.html
I am not exactly sure how to include this in my code.
If you could point me in the right direction, I would appreciate it.

Using Field-Symbols in a user exit to change the importing parameter

Please don't ask why but I need to use a user exit, changing the importing parameter. I decided that I could do this using field-symbols.
Please excuse my ignorance but I have never used field symbols for something such as this.
Here is my goal: Loop through an internal table (im_document-item). When I find what I need I want to make a change to this line (not so hard if I am looping into a field symbol) and also append a line to the end of the table im_document-item.
I have the following so far:
DATA: wa_item TYPE accit,
wa_item_out type ACCIT_SUB.
FIELD-SYMBOLS: <document> type acc_document,
<accit> TYPE ACCIT.
LOOP AT im_document-item ASSIGNING <accit> where saknr = '0000211000'.
* Modify the curent line
wa_item = <accit>
* Append a new line into table im_document-item.
ENDLOOP.
How can I use field-symbols to append a line to this table? Please note that the table in question (im_document-item) is an importing only parameter.
Regards,
Davis

that will allow me to append an initial line with <accit> pointing to the line. Therefore I just have to modify <accit> and the new line will then have my changes?
Yep, that is exactly it. So after the APPEND statement, simply fill the fields of the <accit>.
append initial line to im_document-item ASSIGNING <accit>.
<accit>-field1 = 'Blah'.
<accit>-field2 = 'Blah'.
Regards,
Rich Heilman

Form interface import parameter cannot be used in smartform

Similar Messages

Maybe you are looking for