Form Portlet Now Displaying

I have created a Form Portlet but my form does not display. I created I report against the same remote database (using a DB link and a public synonym) and it works fine.
I can edit the Form Portlet but can't do anything to make it show up on my page.

there must be some code which commits or posts the data in any other trigger.

Similar Messages

  • How do I reference a field in form portlet?

    I created a simple form portlet in Oracle Portal using the wizard.
    I want to execute a custom pl/sql query using simple select statement. (e.g. select emp from scott where ...)
    I created a new Button item.
    In the PL/SQL Button Event Handler I put the select statement.
    Now I have 2 questions.
    Question 1. Do I have to use the Query or Custom button.
    Question 2. In either way I get PLS-00428: an INTO clause is expected in this SELECT statement.
    I guess the fundamental question here is how do I reference a field in the form?

    If I understand you correctly you want to click on the button and then display a value selected from the database, right?
    1. You have to use the Custom button - query is exclusive for the form query.
    2. You will have to select the value into an interim PL/SQL variable and then set the form field using the portal session attribute.
    The following principles apply:
    * To set a field you have to use code like
    p_session.set_value(
    p_block_name => 'DEFAULT',
    p_attribute_name => 'A_RFS_ID',
    p_value => 30);
    p_session.save_session;
    where
    - p_session is available in most custom PL/SQL blocks - I'm not sure if its in the custom block for a button - this type of code is used mostly in the "cusom pl/sql before form is displayed" (last tab) - if its not available you might have to jump through some more hoops !:). It refers to a portal stored session that is used to store all the internal variables.
    - block_name is either DEFAULT for simple forms or MASTER or DETAIL for master/detail forms
    - p_attribute_name is the name of the field you want to set BUT (very important) prefixed with A_
    - p_value is the actual value - here you will use your pl/sql variable.
    so try something like:
    l_number number;
    select anumber into l_number from atable where ....;
    p_session.set_value(
    p_block_name => 'DEFAULT',
    p_attribute_name => 'A_field1',
    p_value => l_number);
    p_session.save_session;

  • Passing parameters between form portlets on two different pages ...

    Here is a brief summary of our problem.
    We have one master form and a detail form which are published as portlets and placed in two different pages.
    Now i want to pass parameters from master form portlet resides on one page to detail form portlet resides on another page.
    Say for example, when i invoke master form (created based on demo DEPT table), enter values on fields then invoke another page
    on which the second form portlet (say form based on EMP demo table) resides. Now i want to pass deptno to second form and
    get displayed in deptno field of second form.
    I was looking at the following posting, but how to do this when forms are published as portlets and placed on two different pages ?
    http://forums.oracle.com/forums/message.jsp?id=997683
    Customer actually want to pass a parameter from master form to 5 detail form portlets resides on different pages.
    This is bit urgent as it is the only problem stopping the customer go live.
    Thanks in advance.

    Please refer to post Re: session state security
    It tells you how to populate a form portlet in a page by clicking on a link in a report portlet.
    You can use the wwsto_api_session objects to store data submitted by the master and let the detail form pick it up and proceed with the query.

  • Form does not display all records from table

    Hi guys
    I modified one form that was based on a signle DB table. I removed certain fields from the table and added some extra fields to that table. Then based on the new table I also modified the form and removed the text items related to old fields in the table and added new text items pointing to the new fields now. II have checked all the new items properties and they have don't seem to be wrong or so. But now the problem is the form does not display all the records from the table. before it used to display all records from the table when qureied but not now. It only certain records from the table containing all new data and also old data but the form does not display other records though I don't see any obvious discrepancy. Remember that the before doing the modifications, I have table back for the old, created another table that contained new records for the new fields, and then I inserted the old records and updated the new table data in the new table with these new table values. So this way I have got my new table. Could someone help why the new modified form fails to display all records from the new table updated table though it display some of them successfully.
    Any help will be appreciated.
    Thanks

    hi
    Set the block property of "Query All Records" to "YES"
    hope it will work.
    Faisal

  • The Forms are not displaying correctly

    the Forms are not displaying correctly. Editing mode and printing mode are missing contents of notes/text field (Additional Notes, Background or Need, Project Summary). Second issue is when viewing/printing a Project Profile - Short Form, the text fields
    are shrink, they are not displayed full high to show all the text. It was working with IE9, IE10, but now IE10 and IE11 dont work.

    tested with Google Chrome and that seems to work the best in terms of viewing and printing the forms.
    Then you could try spoofing Google Chrome using a User-Agent string override and Document mode Edge.  Or open  IECompatData.xml  to see if you should have Compatibility View enabling Microsoft's list.  Or report your problem symptom and
    desired override here:
    http://www.modern.ie/report-compat-problem
    Ref:
    http://msdn.microsoft.com/en-us/library/gg699485(v=VS.85).aspx
    Robert Aldwinckle

  • Getting my report portlet, to link to my form portlet

    I am attempting to put together a portal page that has the
    following components:
    A- Form Portlet with a Pull Down that links to a
    B- Report Portlet built by a SQL Statement that links to a
    C- Form Portlet that acts like a Property Sheet from the Report
    A drives B that drives C, all within the same page, using page
    refreshes, to show the linkage after clicks.
    I have been able to put this together because, I have used the
    explanation found in the Advanced Portal Presentation put
    together by Kenneth Atkins, that can be found at
    http://www.arrowsent.com.
    It provides a really good explanation on how to link portal
    components(forms, reports, etc) using the pdk.
    I have attempted to use what he has put together, and in general,
    it is all working, as he has explained in your ppt, except the
    very last bit. Where B refreshes C
    That is, my pull down form refreshes the report, just fine.
    and then when I click on my "item" in the report, to refresh my
    detail form, it does that, but what it brings, up is the item, I
    clicked on previously. It's like the "C" Component wants to show
    the previously selected item, rather than the current one.
    I am using Portal 3.0.9, on 8.1.7, and this behaviour is
    consistent on both Solaris and Win2000
    I have included the PL/SQL code that is inserted in "Before page
    processing section" of the "C" form.
    My guess is, that I have syntax wrong in either the do_event line
    or I am not setting the rowid for the auto_query to work
    properly.
    regards
    Franco
    =================================================================
    ================================
    PROCEDURE autoquery_task_form(p_session in out
    PORTAL30.wwa_api_module_session) IS
    v_RowID VARCHAR2(100);
    v_Session portal30.wwsto_api_session;
    v_st_id varchar2(40); --STEPS.ST_ID%TYPE;
    BEGIN
    v_Session := portal30.wwsto_api_session.load_session('CONTEXT',
    'SESS_PROJECT');
    v_st_id := v_Session.get_attribute_as_varchar2('ST_ID');
    htp.p('Print Step Id='||v_st_id); htp.br;
    BEGIN
    SELECT rowidtochar(rowid) INTO v_rowid
    FROM STEPS
    WHERE ST_ID= to_number(v_st_id);
    END;
    htp.p('Print Row Id='||v_rowid); htp.br;
    -- Tell the component that the query is coming from a link, and
    that the rowid
    -- is being used to query the correct context record.
    p_session.set_value (p_block_name=>'DEFAULT',
    p_attribute_name=>'_CALLED_FROM_LINK',p_value=>'ROWID');
    -- Pass the rowid of the context record to query.
    p_session.set_value (p_block_name=> 'DEFAULT',
    p_attribute_name=> '_ROWID',p_value=> v_rowid);
    -- Now do the actual query, using the query button processing
    in the target module
    -- this seems to execute with the rowid in context of the
    previous instance i.e, Out of Synch by 1 element in an array
    PORTAL30.wwa_api_module_event.do_event('DEFAULT',
    'QUERY_BOTTOM', 1, 'ON_CLICK', True, '', p_session);
    -- Save the session information, which includes the
    p_session.save_session;
    END;

    Hi,
    It seems like we have the same problem!!!
    Look at http://forums.oracle.com/forums/message.jsp?id=539039

  • Image in a Form Portlet disappears

    I made a Form with an Image (Signatur of an employee - gif). Everithing goes fine. I can upload an image, i can see it too in a Form.
    Now i want to run this Form as a Portlet on my Portal-Site.
    Everithing is o.k., but now i can not see my image any more.
    Why?
    any suggestions?
    thanks!

    check permissions - unfortunately don't know the details, sorry!

  • Using a Simple Parameter Form Portlet with a Report Portlet to Search DB

    My organization registers clients for workshops in iLearning.We use iPortal for our web site. I would like to use a Simple Parameter Form Portlet for clients to conduct a search on the data that is in iLearning and have it displayed in a Report Portlet on a separate page. I have been able to bring the iLearning data into the Report Portlet but I have not been successful in setting up the Simple Parameter Form Portlet to do a search on the data and then have it displayed. Any suggestions.

    hi,
    i just tested this in portal 10.1.4 and it works fine. you can fire an event and pass a parameter from a simple parameter form portlet and consume this page parameter in a portlet builder reports component. there is some documented behavior in bug 3321558 that has to do with personaliziation (customization in older releases). if you enter some personalization the page parameter gets ignored. for more information on this please contact oracle support services.
    regards,
    christian

  • Unable to display Info path form using IE , The form cannot be displayed in the browser because the use of DOM storage has been disabled in the current browser settings. In order to load the form, DOM storage must be allowed.

    I have edited the default edit form for my Issue Tracking Tool using Info Path, But currently when I try accessing the form using IE 10 64x , I got the following error-
    “The form cannot be displayed in the browser because the use of DOM storage has been disabled in the current browser settings. In order to load the form, DOM storage must be allowed.”
    But using Firefox I was able to access the edit form , so can anyone advice on this please?
    Thanks

    . Tools > Internet Options > Privacy Tab > Advanced
    Check the over-ride box to Enable/Accept cookies. Click on Always allow session
    cookies.
    2. Clear Your Cache and Cookie Files
    If you are using an Internet Explorer browser, please follow these instructions to clear
    your cache and cookie files: Open your Internet Explorer browser.
    Tools > Internet Options > General > Browsing History
    Click Delete Browsing History.
    Delete Temporary Internet Files, Cookies and History Also under Browsing History,
    click Settings and make sure that your browser automatically checks for newer versions
    of stored pages. Click OK and restart your browser
     3. Pop-up Blockers
    Turn Off the firewall in IE.
    you can disable\enable it from below:
    http://webdevwonders.com/clear-dom-storage/
    Clear DOM Storage in Firefox:
    Select “Tools” -> “Clear Recent History”, open “Details”, check “Cookies” and select “Everything” as time range.
    ATTENTION: No other time range will clear the DOM Storage. Have a look at
    Mozillas documentation for further info.
    Disable DOM Storage in Firefox:
    Type “about:config” in your address bar and hit enter to view your internal browser settings. Scroll down to „dom.storage.enabled“, right click on it and hit „Toggle“ to disable the DOM Storage.
    Clear DOM Storage in Internet Explorer:
    Select “Tools” -> “Internet Options” -> “General” -> check “Delete browsing history on exit”, click on “Delete”, check “Cookies”, click on “Delete” once more and restart your browser afterwards.
    Disable DOM Storage in Internet Explorer:
    Select “Extras” -> “Internet Options” -> “Advanced” Tab -> Go to “Security” -> uncheck “Enable DOM-Storage”
    Clear DOM Storage in Chrome:
    Select “Tools” -> “Clear browsing data…”, check “Delete cookies and other site data”, select “Everything” from “Clear data from this period” and click on “Clear browsing data”.
    Disable DOM Storage in Chrome:
    Open “Options” and select “Under the Hood” Tab. Click on “Content settings…”, select “Cookies” and set “Block sites from setting any data”.
    If this helped you resolve your issue, please mark it Answered
    ok i did all these steps but still i am getting the same error,, i can not understand how SharePoint works better on firefox and chrome comparing to IE !!! so what i should do now , as all the edit forms that are customized using Info path can not be viewed
    on IE 10 64x !!!!

  • Third party forms no longer display correctly.

    I inserted a form using code from InfusionSoft for a client and it displayed fine on the Muse page (not in the Preview or Design mode, but once it was uploaded it was fine).  That was on or about January 02. 
    Today, January 05, I attempted to insert a form for another client using iContact.  The form just wouldn't display properly. 
    After 2 hours of messing with it and testing it on other sources (WordPress, for example, where it displayed nicely), I decided to insert the InfusionSoft form from the first client into a test page for the second client.  Now, the form that worked before did NOT display correctly. 
    Was there an update during this time that muffed this up on Adobe Muse?  I enjoy the product, and eagerly look forward to updates. In fact, Muse is one of only 3 products I really use anymore from the Creative Cloud package; however, I have to be able to easily insert forms.
    Any advice, suggestions, comments, or compliments (yeah, I included compliments, cuz after 2 hours of non-billable frustration, I could use a smile).
    --Dave

    After another hour or more: to fix the issue with forms not displaying correctly:
    Upload the site to the host (even tho the form does not display correctly).
    From the Cpanel's File Manager (or via ftp) go to
    css folder
    then to
    site_global file
    locate the lines:
    body,div,dl,dt,dd,ul,ol,li,h1,h2,h3,h4,h5,h6,pre,code,form,fieldset,legend,input,button,te xtarea,p,blockquote,th,td,a
              margin: 0;
              padding: 0;
              border-width: 0;
    and remove the word "input," .
    end.

  • How to show photo in form portlet when using ORDSYS.ORDIMG?

    I built a Form based on table that has ORDSYS.ORDIMG column.
    When I query the form,the photo shows. And then I publish this
    form to portal and add in a page. But the form portlet doesn't
    show picture, when I query. Why? What should I do?
    Please help me. I'm looking forward to hearing from all of
    you
    Thank you,
    Sirin

    Well I don't know how to use the ORDSYS.
    So I've created a solution myself using javascript.
    I created a table with a column "image" as VARCHAR2. Using the portal image fieldtype (in a form) will store the image name in the table-column and the actual image in a portal own table.
    1) First in the form added a new field (label only)
    2) The label is "<IMG SRC=/images/blank.gif NAME=test>"
    NB. I'm not sure if I added the blank image myself or not but it is a small gif in the images directory with only a transparent color.
    3) In the Additional PL/SQL Code section ... after displaying the page I added the following code;
    DECLARE
    v_image VARCHAR2(200);
    BEGIN
    v_image := p_session.get_value_as_VARCHAR2(
    p_block_name => 'DEFAULT',
    p_attribute_name => 'A_<imagefieldname>');
    IF v_plaatje IS NOT NULL THEN
    HTP.PRINT('<script language="JavaScript">
    if(document.images)
    document.test.src="http://<hostname>/pls/portal30/docs/'||v_image||'";
    </script>');
    END IF;
    END;
    Regards,
    Arnoud Koot
    Oracle Web Consultant
    http://www.thedoc.nl

  • Form portlets give preference path errors

    Hi there,
    I've created a number of application components that work well
    in isolation. However, when I place them as portlets on a page I
    often get the following (or similar) error messages when I flick
    between the tabs that contain the portlets.
    Error: An unexpected error occurred: ORA-01403: no data found
    ORA-01403: no data found (WWV-16016)
    An unexpected error occurred: ORA-01403: no data found (WWV-
    16016)
    The preference path does not exist:
    ORACLE.WEBVIEW.PARAMETERS.753_RP_MAINT_ROV_COMPONENT_2498561
    (WWC-51000)
    My components all share a small number of tables and I find the
    problems usually occur when I delete a record from one form
    portlet and then click on a tab to display a different form
    portlet. My forms all contain combobox LOVs based on a query.
    What is causing such annoying problems? I need to fix it ASAP!

    repost...

  • Portlet for displaying pages/content areas link for a user

    Does anybody have a JPDK portlet to display
    pages available to a user?
    The navigator looks too technical/complex for a regular portal user.
    Thanks for your time.

    Lookup column is the attribute of file. Attribute can not be upload! . Did you try to use the content type of link to document? If yes, you can understand my question. I want to change uploaded.aspx ( link of document) and add lookup column to this form.
    Standart scenario: User create link to docunent. 1. Prees button start. 2. Input text link to upload.aspx form 3. Set attributes new. Aspx I want: 1. Press button. 2. User press dropdawn menu and choise neddeng link. 3. Set attributes Plese read my question
    again. Sorry for my not good english

  • Portlet that displays links inside it

    I need a portlet that displays the links inside the portlet without opening a new window.
    Thanks
    null

    Hi there,
    We've been playing around with something like this. We wanted to create an application which acted as an autonomous entity within a portal page. We finally managed to do this with a combination of the parameters passing example and use of session variables (wwpre_api). The thing here is that any session variables must be referenced with the portlet reference and a portlet's show method must always pre-check for the current state.
    The main thing to watch out for is that you want any portlets shown on a particular page to retain state while you are "working" in another portlet, hence the session variables.
    This is now growing into an application framework which allows screen changes (i.e. edit to list and back) to occur from links within the portlet, without jumping to a new page. We are considering to eventually release this when we cleaned things up a bit.

  • How to show a time field in a form portlet

    Hi,
    I am not familiar with PL/SQL and I was wondering how I could show a time field on a form portlet.
    I have a date column in my database that stores the time and date together, but I do not know how to separate them into date and time fields. I also do not know how to concatenate them when a user inserts a new record, or how to query on a date alone.
    At present, the user has to type the date and time following this format mask hh:mi am DD/Mon/RR
    I also have a problem with one of my hidden id fields. I have set the default to a sequence.nextval (#qtc_app.seq_visitor.nextval) and then hidden it since
    it is irrelevant to my users. However, I can no longer use the query function since the sequence is always generating a new value. How would I only generate
    a new sequence no. when a user inserts a record??
    Thank you!
    cheers, Kim

    Hi,
    Each colunm in the form has a format mask associated with it. For the date column make the format mask like this DD-MON-RR HH.MI. This will show the date along with the hours and minutes.
    Thanks,
    Sharmila

Maybe you are looking for