FORM RESOURCES

I am new in Oracle Form and i do not have any idea about it. I need to develop oracle form. Plz give me some resources that will help me to work from the scratch.

Hello,
The starting point is here:
http://www.oracle.com/technology/products/forms/index.html
after this, what about Googling ?
Francois

Similar Messages

Create XML Form Resource with Repository Framework API

Hi KM Experts,
What's the procedure to create an XML Form Resource based on an exisitng XML Form Type?
I'm working with SAP EP 6 SP2 so I assume I need to use following interfaces:
IXMLForm
IXMLFormManager
IXMLFormsService
But how do I create a new resource of XMLForm type ...
Regards
Laurent
Message was edited by: Laurent Bouziani

Which database release are you using...
The computed constructors feature of XQuery may help.
-Mark

Forms resource file - fmrweb.res

Friends,
When I ran my forms6i by pressing "Run in Web Mode",Button, it
executes in web mode. I was told that, it uses resource file
fmrweb.res for key mapping.
I would like know more about fmrweb.res ( resource file) and
what all properties I can set in it for application.
Any pointers/documents/tip would be highly appreciated.
Chandra Mohan Reddy

FFN 95 is the function for List Tab Pages. Some sharp guy in Oracle hardcoded it to F2 so that if you ever want to use F2 for anything else, you MUST include a 95 someplace in your fmrweb.res file and reassign it. I reassign the List Tab Pages as follows:
113 : 11: "Ctrl+Alt+Shift F2":95: " List Tab Pages"Now, for the other issue: If the key always shows up, you can precede the description with a hex A0 (decimal 160 character), which shows up as a space, but sorts higher than A-Z, so it will appear last in your show keys list.
And try assigning it to FFN 82 through 91, which are named Function 0 through Function 9. With one of those functions, unless your form has a KEY-Fn trigger defined, then pressing F10 will probably get an "FRM-41008: Undefined function key" error.

Could not parse mapping document form resource

What is meaning of this error
Could not parse mapping document from resource user.hbm.xml
log4j:WARN No appenders could be found for logger (org.hibernate.cfg.Environment).
log4j:WARN Please initialize the log4j system properly.
Exception in thread "main" java.lang.NullPointerException
at UserClient.main(UserClient.java:39)

I also faced same problem when i wrote my first hibernate mapping file, this error will accur because of bad xml parser design, the parser developer did not even validate and remove blank lines from xml before parsing it, becuse of that if there is first blank line in your xml mapping file then we will get "The processing instruction target matching "[xX][mM][lL]" is not allowed" error.
Solution: Just check is there any blank line at the begining of your hibernate mapping file if so remove that then it will works fine.

Key-nextrec not firing in forms 10g

I have a code in the above trigger, but it is not firing, I have it in the block property and no other place in the form
message('In key next rec----'); message(' ');
IF :SYSTEM.Last_Record = 'TRUE' Then
Null;
Else
next_record;
End If;

when-new-record-instance runs when you navigate to the next record.
Key-Nxtrec (Nxtrec is the correct spelling) only runs when you press the key assigned to call that trigger. In my environment, it is the Shift+ Down-Arrow key, but it could be just Down-Arrow -- it all depends on what key sequence is assigned to Forms Function Number 67 in your Forms Resource file, FMRWEB.res (or fmrusw.res).
So if the trigger runs when you press the correct keyboard key, and you issue the message but do not call the Next_Record; built-in, focus will not navigate to the next record in your running form.

Input string was not in a correct form

Hi All
I have a problem when I'm running a crystal report , I get this error
"input string was not in a correct format"
This only happens when I run this report on a client machine , on the server its running fine.
Hope this is enough info
rgds
Bongani Dlamini

Hi Don
This is the debug info related to this error " Unhandled exception has occurred in your application. If you click Continue the application will ignore the error and attempt to continue. If you click Quit , the application will close immediately.
See the end of this message for details on invoking
just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
CrystalDecisions.Shared.CrystalReportsException: Load report failed. ---> System.Runtime.InteropServices.COMException (0x80004005): The system cannot find the path specified.
   at CrystalDecisions.ReportAppServer.ClientDoc.ReportClientDocumentClass.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.Open(Object& DocumentPath, Int32 Options)
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   --- End of inner exception stack trace ---
   at CrystalDecisions.ReportAppServer.ReportClientDocumentWrapper.EnsureDocumentIsOpened()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.Load(String filename, OpenReportMethod openMethod, Int16 parentJob)
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.EnsureLoadReport()
   at CrystalDecisions.CrystalReports.Engine.ReportDocument.get_Database()
   at SAP_CR.MyForms.frmReportViewer.ConfigureCrystalReports()
   at SAP_CR.MyForms.frmReportViewer.frmReportViewer_Load(Object sender, EventArgs e)
   at System.Windows.Forms.Form.OnLoad(EventArgs e)
   at System.Windows.Forms.Form.OnCreateControl()
   at System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
   at System.Windows.Forms.Control.CreateControl()
   at System.Windows.Forms.Control.WmShowWindow(Message& m)
   at System.Windows.Forms.Control.WndProc(Message& m)
   at System.Windows.Forms.ScrollableControl.WndProc(Message& m)
   at System.Windows.Forms.ContainerControl.WndProc(Message& m)
   at System.Windows.Forms.Form.WmShowWindow(Message& m)
   at System.Windows.Forms.Form.WndProc(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
   at System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
   at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
************** Loaded Assemblies **************
mscorlib
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3603 (GDR.050727-3600)
    CodeBase: file:///C:/Windows/Microsoft.NET/Framework/v2.0.50727/mscorlib.dll
SAP_CR
    Assembly Version: 2.0.0.7
    Win32 Version: 2.0.0.7
    CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/SAP_CR.exe
Interop.SAPbouiCOM
    Assembly Version: 8.0.0.0
    Win32 Version: 8.0.0.0
    CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/Interop.SAPbouiCOM.DLL
System.Windows.Forms
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Windows.Forms/2.0.0.0__b77a5c561934e089/System.Windows.Forms.dll
System
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System/2.0.0.0__b77a5c561934e089/System.dll
System.Drawing
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Drawing/2.0.0.0__b03f5f7f11d50a3a/System.Drawing.dll
CustomMarshalers
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/Windows/assembly/GAC_32/CustomMarshalers/2.0.0.0__b03f5f7f11d50a3a/CustomMarshalers.dll
Interop.CR_Crypto
    Assembly Version: 6.0.0.0
    Win32 Version: 6.0.0.0
    CodeBase: file:///C:/Program%20Files/SAP/SAP%20Business%20One/AddOns/SAP_CR/Interop.CR_Crypto.DLL
System.Data
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/Windows/assembly/GAC_32/System.Data/2.0.0.0__b77a5c561934e089/System.Data.dll
System.Configuration
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Configuration/2.0.0.0__b03f5f7f11d50a3a/System.Configuration.dll
System.Xml
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3074 (QFE.050727-3000)
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/System.Xml/2.0.0.0__b77a5c561934e089/System.Xml.dll
System.Transactions
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/Windows/assembly/GAC_32/System.Transactions/2.0.0.0__b77a5c561934e089/System.Transactions.dll
System.EnterpriseServices
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3053 (netfxsp.050727-3000)
    CodeBase: file:///C:/Windows/assembly/GAC_32/System.EnterpriseServices/2.0.0.0__b03f5f7f11d50a3a/System.EnterpriseServices.dll
CrystalDecisions.Windows.Forms
    Assembly Version: 12.0.2000.0
    Win32 Version: 12.1.2000.882
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Windows.Forms.dll
CrystalDecisions.Shared
    Assembly Version: 12.0.2000.0
    Win32 Version: 12.1.2000.882
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Shared/12.0.2000.0__692fbea5521e1304/CrystalDecisions.Shared.dll
CrystalDecisions.ReportSource
    Assembly Version: 12.0.2000.0
    Win32 Version: 12.1.2000.882
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportSource/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportSource.dll
CrystalDecisions.CrystalReports.Engine
    Assembly Version: 12.0.2000.0
    Win32 Version: 12.1.2000.882
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine/12.0.2000.0__692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.dll
System.Web
    Assembly Version: 2.0.0.0
    Win32 Version: 2.0.50727.3074 (QFE.050727-3000)
    CodeBase: file:///C:/Windows/assembly/GAC_32/System.Web/2.0.0.0__b03f5f7f11d50a3a/System.Web.dll
CrystalDecisions.Shared.resources
    Assembly Version: 12.0.2000.0
    Win32 Version: 12.1.2000.882
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Shared.resources/12.0.2000.0_en_692fbea5521e1304/CrystalDecisions.Shared.resources.dll
CrystalDecisions.Windows.Forms.resources
    Assembly Version: 12.0.2000.0
    Win32 Version: 12.1.2000.882
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.Windows.Forms.resources/12.0.2000.0_en_692fbea5521e1304/CrystalDecisions.Windows.Forms.resources.dll
CrystalDecisions.ReportAppServer.CommLayer
    Assembly Version: 12.0.1100.0
    Win32 Version: 12.1.1100.882
    CodeBase: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.CommLayer/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CommLayer.dll
CrystalDecisions.ReportAppServer.ClientDoc
    Assembly Version: 12.0.1100.0
    Win32 Version: 12.1.1100.882
    CodeBase: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.ClientDoc/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ClientDoc.dll
CrystalDecisions.ReportAppServer.DataSetConversion
    Assembly Version: 12.0.2000.0
    Win32 Version: 12.1.2000.882
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.ReportAppServer.DataSetConversion/12.0.2000.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataSetConversion.dll
CrystalDecisions.ReportAppServer.DataDefModel
    Assembly Version: 12.0.1100.0
    Win32 Version: 12.1.1100.882
    CodeBase: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.DataDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.DataDefModel.dll
CrystalDecisions.ReportAppServer.Controllers
    Assembly Version: 12.0.1100.0
    Win32 Version: 12.1.1100.882
    CodeBase: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.Controllers/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.Controllers.dll
CrystalDecisions.ReportAppServer.CubeDefModel
    Assembly Version: 12.0.1100.0
    Win32 Version: 12.1.1100.882
    CodeBase: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.CubeDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.CubeDefModel.dll
CrystalDecisions.ReportAppServer.ReportDefModel
    Assembly Version: 12.0.1100.0
    Win32 Version: 12.1.1100.882
    CodeBase: file:///C:/Windows/assembly/GAC/CrystalDecisions.ReportAppServer.ReportDefModel/12.0.1100.0__692fbea5521e1304/CrystalDecisions.ReportAppServer.ReportDefModel.dll
BusinessObjects.Licensing.KeycodeDecoder
    Assembly Version: 12.0.1100.0
    Win32 Version: 12.1.0.882
    CodeBase: file:///C:/Windows/assembly/GAC/BusinessObjects.Licensing.KeycodeDecoder/12.0.1100.0__692fbea5521e1304/BusinessObjects.Licensing.KeycodeDecoder.dll
CrystalDecisions.CrystalReports.Engine.resources
    Assembly Version: 12.0.2000.0
    Win32 Version: 12.1.2000.882
    CodeBase: file:///C:/Windows/assembly/GAC_MSIL/CrystalDecisions.CrystalReports.Engine.resources/12.0.2000.0_en_692fbea5521e1304/CrystalDecisions.CrystalReports.Engine.resources.dll
************** JIT Debugging **************
To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
For example:
<configuration>
    <system.windows.forms jitDebugging="true" />
</configuration>
When JIT debugging is enabled, any unhandled exception
will be sent to the JIT debugger registered on the computer
rather than be handled by this dialog box.
Regards
Bongani

Image not displayed in pdf generated using Java API for Forms service

Hi,
I am creating a pdf document using Java API for Forms Service.
I am able to generate the pdf but the images are not visible in the generated pdf.
The image relative path is coming in the xml as defined below. The images are stored dynamically in the Livecycle repository each time a request is fired with unique name before the xml is generated.
<imageURI xfa:contentType="image/png" href="../Images/logo.png"></imageURI>
Not sure if I need to specify specify specific URI values that are required to render a form with image.
The same thing is working when I generate pdf document using Java API for Output Service.
As, I need to generate interactive form, I have to use Forms service to generate pdfs.
Any help will be highly appreciated.
Thanks.

Below is the code snippet:
            //Create a FormsServiceClient object
            FormsServiceClient formsClient = new FormsServiceClient(myFactory);
            //Specify URI values that are required to render a form
            URLSpec uriValues = new URLSpec();
                              // Template location contains the whole rpository path for the form
            uriValues.setContentRootURI(templateLocation);
           // The base URL where form resources such as images and scripts are located. Whole Image path is passed in BaseUrl in the http format.
                  String baseLocation = repositoryPath.concat(serviceName).concat(imagesPath);
                              uriValues.setBaseURL(baseLocation);
            // Set run-time options using a PDFFormRenderSpec instance
            PDFFormRenderSpec pdfFormRenderSpec = new PDFFormRenderSpec();
            pdfFormRenderSpec.setCacheEnabled(new Boolean(true));
            pdfFormRenderSpec.setAcrobatVersion(com.adobe.livecycle.formsservice.client.AcrobatVersio n.Acrobat_8);
                              //Invoke the renderPDFForm method and write the
            //results to a client web browser
            String tempTemplateName =templateName;
            FormsResult formOut = formsClient.renderPDFForm(tempTemplateName,
                                          inXMDataTransformed,pdfFormRenderSpec,uriValues,null);
            //Create a Document object that stores form data
            Document outputDocument = formOut.getOutputContent();
            InputStream inputStream = outputDocument.getInputStream();

Bug in form based authorization ( url-patter /* and loginform in /*)

Try this:
examples\weapp\security
default web.xml file for this webapp has url-pattern =
<url-pattern>/admin/*</url-pattern>
try to register this web application as default webApplication ( this can be
done only by editing config.xml manualy - this is feature or bug ? =) )
and change url-pattern to <url-pattern>/*</url-pattern> and try to run this
example. Weblogic falls to recursion when executing this example. Porblem is
that access to loginform is protected by /* but in order to access resouces
in /* i need autorization which can be performed only by using loginform
PS: sorry for my poor english
Regards,
Giedrius Trumpickas

in the web.xml, you can specify some security setting , also the the protected
resources are grouped by url pattern, so to avoid that ,you can group the protected
url pattern to exclude the form resource, so the form resource page don't need
to protected. or if weblogic is really smart , they should in default to leave
the form page or error page or welcome page unprotected.
Hope that helps.
Yaodong Hu
"Giedrius Trumpickas" <[email protected]> wrote:
Try this:
examples\weapp\security
default web.xml file for this webapp has url-pattern =
<url-pattern>/admin/*</url-pattern>
try to register this web application as default webApplication ( this
can be
done only by editing config.xml manualy - this is feature or bug ? =)
and change url-pattern to <url-pattern>/*</url-pattern> and try to run
this
example. Weblogic falls to recursion when executing this example. Porblem
is
that access to loginform is protected by /* but in order to access resouces
in /* i need autorization which can be performed only by using loginform
PS: sorry for my poor english
Regards,
Giedrius Trumpickas

Need advice for form deployment

We are using approx. 500 forms in an LC Update1 environment. This forms have been deployed under the resource tab in workbench and used by a formportal, built by the customer. We are going to move to ES3 and my question is where should we put the forms (+fragments and schemas)?
Should we stay with resources (and have to import them with adminui) or create an application and put them there (is it ok to have this amount of files in an application?) or could we use the filesystem? Any pros and cons are appreciated.
Thanks
Tommy

In an upgrade scenario, it is better that one continues with the existing approach of deploying forms (Resources or Application).
If you change the approach, then you may have to change all the places (portals, processes etc) which were referring to these forms.
Regards
Subra

GETFORMATTRIB() not available to form/section triggers

Hello all,
I am just wondering why the DAL function - GETFORMATTRIB() returns nothing when used in a form/image trigger.
Attribute values are set to all the forms well in advance and why these cannot be made availabe before Gendata() ? Any reason?
Thanks !
Navin

The form attributes and metadata are part of the content of the form resource stored in the library. The triggering process doesn't actually load the form resource from the library and therefore doesn't have access to content within the form. The normal process is that triggering decides to include the form based upon your extract data and then the form is loaded from the library. After you add the form, you can then check the attributes and metadata assigned to the form.
I suppose - with some enhancement - there could be certain attributes defined within the Form List (group) file for a given form that might be accessible during the triggering process, but as a general rule, no one wants the performance hit of loading forms from the library that may not become part of the transaction. Therefore, any attributes defined within the form itself will not be available prior to triggering it.

Oracle forms 6i compatibility with 11g

Hi,
We are in the process of migrating our Oracle to version 11g, due to a product upgrade.
The current system is on Oracle 9i and holds Oracle forms developed on Oracle 6i, will this form still be usable on Oracle 11g after upgrade? or do we also need to upgrade the Oracle developer suite to 11g?
If the developer Suite is also required to be upgraded to 11g, then is it required that the coding syntax/conventions within the existing forms will change?
I am not a forms resource and trying my hands on an upgrade directly. Please assist
Regards,
Hemanth

Oracle Forms - Oracle 6i to Oracle 11g

Problem caching EPS files with multiple forms

I'm attempting to use multiple forms for caching 1 or more EPS Files in a postscript document. I've followed Technical Note #5144 to the letter and use the "array of strings" method since I have to support Postscript level 2 printers. The arrays appear to be loaded with strings representing the EPS as expected.
If I use only a single form with 1 EPS it works great. I can execute the form anywhere on the page as many times as I want. If I add a 2nd form to the page it causes strange behavior. The 2nd form is drawn regardless of if I execute it or not. Even if I comment out ALL execform calls it still shows the 2nd form (the page should be blank).
I've boiled down the code to a faily simple example. I took out all the binary EPSF content for each form and instead have each form draw a circle.
If working write this postscript should be drawing a smiley face using 4 circles.
Should look something like this:
0 0
0
<> <--- This should show like a stretched out circle.
However, the mouth is actually drawn very small down in the lower left hand corner of the page. If you change the order of the forms definition then the mouth is drawn correctly but not the eyes and nose.
The forms as named EPSForm-Circle and EPSForm-Circle2
Here's the postscript
%!PS-Adobe-3.0
%%BoundingBox: 0 612 792 0
%%LanguageLevel: 2
%%Pages: 1
%%BeginProlog
%%BeginResource: procset forms_ops 1.0 0
userdict /forms_ops 10 dict dup begin put
/BeginEPSF { %def
userdict begin % Push userdict on dict stack
/b4_Inc_state save def % Save state for cleanup
/dict_count countdictstack def % Count objects on dict stack
/op_count count 1 sub def % Count objects on operand stack
/showpage { } def % Redefine showpage, { } = null proc
} bind def
/EndEPSF { %def
count op_count sub {pop} repeat % Clean up stacks
countdictstack dict_count sub {end} repeat
b4_Inc_state restore
end % userdict
} bind def
/buffer 16000 string def
/inputFile currentfile 0 (% $$EPS_EOD_Marker$$) /SubFileDecode filter def
/readdata { % array readdata --
1 { % put counter on stack
% stack: array counter
2 copy % stack: array counter array counter
inputFile buffer readstring % read contents of currentfile into buffer
% stack: array counter array counter string boolean
4 1 roll % put boolean indicating EOF lower on stack
16000 string copy % copy buffer string into new string
% stack: array counter boolean array counter newstring
put % put string into array
not {exit} if % if EOF has been reached, exit loop.
1 add % increment counter
} loop
% increment counter and place empty string in next position
1 add 2 copy () put pop
currentglobal true setglobal exch
0 1 array put % create an array for counter in global VM,
% so as not to be affected by save/restore calls in EPS file.
% place as first element of string array.
setglobal % restore previously set value
} bind def
currentdict readonly pop end
%%EndResource
%%EndProlog
%%BeginSetup
% set MaxFormItem to be equivalent to MaxFormCache
<< /MaxFormItem currentsystemparams /MaxFormCache get >> setuserparams
% make forms procset available
forms_ops begin
userdict begin
% setup 1st circle form resource
%%BeginResource: form EPSForm-Circle
/EPSForm-Circle
10 dict begin
/FormType 1 def
/BBox [0 0 100 100] def
/Matrix [1 0 0 1 0 0] def
/EPSArray 3 array def
/AcquisitionProc {
EPSArray dup 0 get dup 0 get
dup 3 1 roll
1 add 0 exch put
get
} bind def
/PaintProc {

The postscript was cut off on 1st post. Here is the remainder:
begin
BeginEPSF
EPSArray 0 get 0 1 put
//AcquisitionProc 0 () /SubFileDecode filter
cvx exec
EndEPSF
end
} bind def
currentdict end def % EPSForm-Circle
EPSForm-Circle /EPSArray get
readdata
%%BeginDocument: (Circle.eps)
50 50 3 0 360 arc closepath stroke
%%EndDocument
% $$EPS_EOD_Marker$$
%%EndResource
% setup 2nd circle form resource
%%BeginResource: form EPSForm-Circle2
/EPSForm-Circle2
10 dict begin
/FormType 1 def
/BBox [0 0 100 100] def
/Matrix [1 0 0 1 0 0] def
/EPSArray 3 array def
/AcquisitionProc {
EPSArray dup 0 get dup 0 get
dup 3 1 roll
1 add 0 exch put
get
} bind def
/PaintProc {
begin
BeginEPSF
EPSArray 0 get 0 1 put
//AcquisitionProc 0 () /SubFileDecode filter
cvx exec
EndEPSF
end
} bind def
currentdict end def % EPSForm-Circle2
EPSForm-Circle2 /EPSArray get
readdata
%%BeginDocument: (Circle2.eps)
50 50 3 0 360 arc closepath stroke
%%EndDocument
% $$EPS_EOD_Marker$$
%%EndResource
%%EndSetup
%%Page: 1 1
%%BeginPageSetup
/pgsave save def
%%EndPageSetup
% Draw left eyeball using Circle form
gsave
-350 100 translate
10.0 10.0 scale
EPSForm-Circle execform
grestore
% Draw right eyeball using Circle form
gsave
-100 100 translate
10.0 10.0 scale
EPSForm-Circle execform
grestore
% Draw nose using Circle form
gsave
-225 -500 translate
10.0 20.0 scale
EPSForm-Circle execform
grestore
% Draw mouth using Circle 2 form.
gsave
-720 -200 translate
20.0 10.0 scale
EPSForm-Circle2 execform
grestore
showpage
/pgsave load restore
%%PageTrailer
end % userdict
end % forms_ops
%%EOF

OIM - Filtering several resources in requests

People,
we have here a lot of resources (more than 3,000), and we want to find a way to filter them (at Grant Resource screen, at the point when you must select one or more resource/s to grant). It is not possible for us to make final users navigate through thouthands of resources in order to reach the one they want. Any ideas?

*1)* Well there is an OOTB filter available from the product for that purpose. As you progress to Step 3: Provide resources of the Grant Resource option, you will automatically see a drop down for filter values as follows:
Resource Name - Name of the Resource Objects as created in OIM.
Resource Form - Resource Form name for that resource.
So you are never supposed to navigate through thousands of resources to fetch your required resource. The whole thing which I talked about is when you are requesting to create a Grant Resource request for other users as your question stated.
*2)* If in case you are talking about the self request part then you can do it with the help of UI customization by extending the action class for tcRequestProvisionResourceAction. You can just update the JSP to also show an extra filter criterion with filter values fetched from a pre-defined lookup in OIM. In addition to it you will also put a search Go button which calls your method to curtail the final resultset which is passed to the populateTableData method for resource list.
Hope this is what you wanted to ask.
Thanks
Sunny
Edited by: rajsunny

Translate Existing Oracle forms application

Hi,
I would like to know about approach i should take to convert existing oracle forms(forms6i) application and db to cater for multiple languages ,
actually the approach which i am taking is to convert forms resources(labels,texboxe) to various languages(using forms windows API) from whatever there in database.But the main issue is about db ,so can anyone help me out that.....
As far as discussion with few people ...as per them its better to create db in UTF8 characterset and that will cater all languages.
Please let me know whether this approach will work or not ....
Regards,
Sandeep

As client is not going to upgrade ,but still he wants to make existing application multilingual....
so is there any way out.

Local MS Access file and SET COUNT

I have a small app that relies on a local MS Access database file for retrieving and storing information.
I've used the "Add new data source" wizard in Visual Studio and then I've bound a couple of richtextboxes to the one (1) table in the database file.
I use this code to let the user save updated text to the file, however it sometimes keeps throwing an error. The code is:
MyDataBindingSource.EndEdit()
CustomersTableAdapter.Update(CustomerdatabaseDataSet)
The error thrown, seemingly at random, but probably occuring when the users edit multiple values, is this: "An unhandled exception of type 'System.Data.DBConcurrencyException' occurred in System.Data.dll". According to http://support2.microsoft.com/kb/310375/en-us
I should set "NOCOUNT" to OFF instead of ON, but no amount of googling is able to tell me how to do that. I've been all over my code and the queries/code generated by the VS wizard, but I cant find any NOCOUNT setting anywhere.
Help, please?

Hello again
Does this output help? I've also pasted the code I'm using below. Many thanks, really out in the deep end here
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\mscorlib\v4.0_4.0.0.0__b77a5c561934e089\mscorlib.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\assembly\GAC_MSIL\Microsoft.VisualStudio.HostingProcess.Utilities\11.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.HostingProcess.Utilities.dll', Skipped loading symbols. Module is optimized
and the debugger option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Windows.Forms\v4.0_4.0.0.0__b77a5c561934e089\System.Windows.Forms.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code'
is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Drawing\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Drawing.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System\v4.0_4.0.0.0__b77a5c561934e089\System.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\assembly\GAC_MSIL\Microsoft.VisualStudio.HostingProcess.Utilities.Sync\11.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.HostingProcess.Utilities.Sync.dll', Skipped loading symbols. Module is
optimized and the debugger option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\assembly\GAC_MSIL\Microsoft.VisualStudio.Debugger.Runtime\11.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualStudio.Debugger.Runtime.dll', Skipped loading symbols. Module is optimized and the debugger
option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\Users\rbl\Documents\Visual Studio 2012\Projects\RuBe Ktj\RuBe Ktj\bin\Debug\RuBe Ktj.vshost.exe', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Data\v4.0_4.0.0.0__b77a5c561934e089\System.Data.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Core\v4.0_4.0.0.0__b77a5c561934e089\System.Core.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Deployment\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Deployment.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is
enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Xml.Linq\v4.0_4.0.0.0__b77a5c561934e089\System.Xml.Linq.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.DataSetExtensions\v4.0_4.0.0.0__b77a5c561934e089\System.Data.DataSetExtensions.dll', Skipped loading symbols. Module is optimized and the debugger option
'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualBasic\v4.0_10.0.0.0__b03f5f7f11d50a3a\Microsoft.VisualBasic.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My
Code' is enabled.
The thread 'vshost.NotifyLoad' (0x1674) has exited with code 0 (0x0).
The thread 'vshost.LoadReference' (0x1e80) has exited with code 0 (0x0).
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\Users\rbl\Documents\Visual Studio 2012\Projects\RuBe Ktj\RuBe Ktj\bin\Debug\RuBe Ktj.exe', Symbols loaded.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Runtime.Remoting\v4.0_4.0.0.0__b77a5c561934e089\System.Runtime.Remoting.dll'
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Numerics\v4.0_4.0.0.0__b77a5c561934e089\System.Numerics.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Windows.Forms.resources\v4.0_4.0.0.0_sv_b77a5c561934e089\System.Windows.Forms.resources.dll'
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\mscorlib.resources\v4.0_4.0.0.0_sv_b77a5c561934e089\mscorlib.resources.dll'
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Accessibility\v4.0_4.0.0.0__b03f5f7f11d50a3a\Accessibility.dll'
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.Transactions\v4.0_4.0.0.0__b77a5c561934e089\System.Transactions.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code' is
enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just
My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_32\System.EnterpriseServices\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.EnterpriseServices.Wrapper.dll', Skipped loading symbols. Module is optimized and the debugger option
'Just My Code' is enabled.
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Configuration\v4.0_4.0.0.0__b03f5f7f11d50a3a\System.Configuration.dll', Skipped loading symbols. Module is optimized and the debugger option 'Just My Code'
is enabled.
StackTrace: ' vid System.Environment.GetStackTrace(Exception e, Boolean needFileInfo)
vid System.Environment.get_StackTrace()
vid RuBe_Ktj.Form1.Form1_Load(Object sender, EventArgs e) i C:\Users\rbl\Documents\Visual Studio 2012\Projects\RuBe Ktj\RuBe Ktj\Form1.vb:rad 20
vid System.EventHandler.Invoke(Object sender, EventArgs e)
vid System.Windows.Forms.Form.OnLoad(EventArgs e)
vid System.Windows.Forms.Form.OnCreateControl()
vid System.Windows.Forms.Control.CreateControl(Boolean fIgnoreVisible)
vid System.Windows.Forms.Control.CreateControl()
vid System.Windows.Forms.Control.WmShowWindow(Message& m)
vid System.Windows.Forms.Control.WndProc(Message& m)
vid System.Windows.Forms.ScrollableControl.WndProc(Message& m)
vid System.Windows.Forms.ContainerControl.WndProc(Message& m)
vid System.Windows.Forms.Form.WmShowWindow(Message& m)
vid System.Windows.Forms.Form.WndProc(Message& m)
vid System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
vid System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
vid System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
vid System.Windows.Forms.SafeNativeMethods.ShowWindow(HandleRef hWnd, Int32 nCmdShow)
vid System.Windows.Forms.Control.SetVisibleCore(Boolean value)
vid System.Windows.Forms.Form.SetVisibleCore(Boolean value)
vid System.Windows.Forms.Control.set_Visible(Boolean value)
vid System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
vid System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
vid System.Windows.Forms.Application.Run(ApplicationContext context)
vid Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
vid Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
vid Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
vid RuBe_Ktj.My.MyApplication.Main(String[] Args) i 17d14f5c-a337-4978-8281-53493378c1071.vb:rad 81
vid System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
vid System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
vid Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
vid System.Threading.ThreadHelper.ThreadStart_Context(Object state)
vid System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
vid System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
vid System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
vid System.Threading.ThreadHelper.ThreadStart()'
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\Microsoft.VisualBasic.resources\v4.0_10.0.0.0_sv_b03f5f7f11d50a3a\Microsoft.VisualBasic.resources.dll'
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Data.resources\v4.0_4.0.0.0_sv_b77a5c561934e089\System.Data.resources.dll'
A first chance exception of type 'System.Data.DBConcurrencyException' occurred in System.Data.dll
'RuBe Ktj.vshost.exe' (Managed (v4.0.30319)): Loaded 'C:\windows\Microsoft.Net\assembly\GAC_MSIL\System.Transactions.resources\v4.0_4.0.0.0_sv_b77a5c561934e089\System.Transactions.resources.dll'
System.Transactions Critical: 0 : <TraceRecord xmlns="http://schemas.microsoft.com/2004/10/E2ETraceEvent/TraceRecord" Severity="Critical"><TraceIdentifier>http://msdn.microsoft.com/TraceCodes/System/ActivityTracing/2004/07/Reliability/Exception/Unhandled</TraceIdentifier><Description>Ohanterat
undantag</Description><AppDomain>RuBe Ktj.vshost.exe</AppDomain><Exception><ExceptionType>System.Data.DBConcurrencyException, System.Data, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089</ExceptionType><Message>Simultankörningsfel:
UpdateCommand inverkade på 0 i stället för 1 poster.</Message><StackTrace> vid System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
vid System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
vid System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping)
vid System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping)
vid System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable)
vid RuBe_Ktj.KunddatabasDataSetTableAdapters.KunderTableAdapter.Update(KunddatabasDataSet dataSet) i C:\Users\rbl\Documents\Visual Studio 2012\Projects\RuBe Ktj\RuBe Ktj\KunddatabasDataSet.Designer.vb:rad 1409
vid RuBe_Ktj.Form1.Button6_Click(Object sender, EventArgs e) i C:\Users\rbl\Documents\Visual Studio 2012\Projects\RuBe Ktj\RuBe Ktj\Form1.vb:rad 152
vid System.Windows.Forms.Control.OnClick(EventArgs e)
vid System.Windows.Forms.Button.OnClick(EventArgs e)
vid System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
vid System.Windows.Forms.Control.WmMouseUp(Message&amp; m, MouseButtons button, Int32 clicks)
vid System.Windows.Forms.Control.WndProc(Message&amp; m)
vid System.Windows.Forms.ButtonBase.WndProc(Message&amp; m)
vid System.Windows.Forms.Button.WndProc(Message&amp; m)
vid System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&amp; m)
vid System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&amp; m)
vid System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
vid System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&amp; msg)
vid System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
vid System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
vid System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
vid System.Windows.Forms.Application.Run(ApplicationContext context)
vid Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
vid Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
vid Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
vid RuBe_Ktj.My.MyApplication.Main(String[] Args) i 17d14f5c-a337-4978-8281-53493378c1071.vb:rad 81
vid System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
vid System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
vid Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
vid System.Threading.ThreadHelper.ThreadStart_Context(Object state)
vid System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
vid System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
vid System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
vid System.Threading.ThreadHelper.ThreadStart()</StackTrace><ExceptionString>System.Data.DBConcurrencyException: Simultankörningsfel: UpdateCommand inverkade på 0 i stället för 1 poster.
vid System.Data.Common.DbDataAdapter.UpdatedRowStatusErrors(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
vid System.Data.Common.DbDataAdapter.UpdatedRowStatus(RowUpdatedEventArgs rowUpdatedEvent, BatchCommandInfo[] batchCommands, Int32 commandCount)
vid System.Data.Common.DbDataAdapter.Update(DataRow[] dataRows, DataTableMapping tableMapping)
vid System.Data.Common.DbDataAdapter.UpdateFromDataTable(DataTable dataTable, DataTableMapping tableMapping)
vid System.Data.Common.DbDataAdapter.Update(DataSet dataSet, String srcTable)
vid RuBe_Ktj.KunddatabasDataSetTableAdapters.KunderTableAdapter.Update(KunddatabasDataSet dataSet) i C:\Users\rbl\Documents\Visual Studio 2012\Projects\RuBe Ktj\RuBe Ktj\KunddatabasDataSet.Designer.vb:rad 1409
vid RuBe_Ktj.Form1.Button6_Click(Object sender, EventArgs e) i C:\Users\rbl\Documents\Visual Studio 2012\Projects\RuBe Ktj\RuBe Ktj\Form1.vb:rad 152
vid System.Windows.Forms.Control.OnClick(EventArgs e)
vid System.Windows.Forms.Button.OnClick(EventArgs e)
vid System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
vid System.Windows.Forms.Control.WmMouseUp(Message&amp; m, MouseButtons button, Int32 clicks)
vid System.Windows.Forms.Control.WndProc(Message&amp; m)
vid System.Windows.Forms.ButtonBase.WndProc(Message&amp; m)
vid System.Windows.Forms.Button.WndProc(Message&amp; m)
vid System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message&amp; m)
vid System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message&amp; m)
vid System.Windows.Forms.NativeWindow.DebuggableCallback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
vid System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG&amp; msg)
vid System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(IntPtr dwComponentID, Int32 reason, Int32 pvLoopData)
vid System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context)
vid System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context)
vid System.Windows.Forms.Application.Run(ApplicationContext context)
vid Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun()
vid Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel()
vid Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run(String[] commandLine)
vid RuBe_Ktj.My.MyApplication.Main(String[] Args) i 17d14f5c-a337-4978-8281-53493378c1071.vb:rad 81
vid System.AppDomain._nExecuteAssembly(RuntimeAssembly assembly, String[] args)
vid System.AppDomain.ExecuteAssembly(String assemblyFile, Evidence assemblySecurity, String[] args)
vid Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssembly()
vid System.Threading.ThreadHelper.ThreadStart_Context(Object state)
vid System.Threading.ExecutionContext.RunInternal(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
vid System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state, Boolean preserveSyncCtx)
vid System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
vid System.Threading.ThreadHelper.ThreadStart()</ExceptionString></Exception></TraceRecord>
An unhandled exception of type 'System.Data.DBConcurrencyException' occurred in System.Data.dll
Additional information: Simultankörningsfel: UpdateCommand inverkade på 0 i stället för 1 poster.
The program '[7824] RuBe Ktj.vshost.exe: Managed (v4.0.30319)' has exited with code 0 (0x0).
Adding a new row:
Private Sub Button6_Click_1(sender As Object, e As EventArgs) Handles SkapanyrutinBtn.Click
Dim newrow As DataRow = KunddatabasDataSet.Tables("Kunder").NewRow()
Dim newrowname As Object = InputBox("Skriv in (kund)namn på den nya rutinen")
newrow("Kundnamn") = newrowname
If newrowname = "" Then
Exit Sub
End If
KunddatabasDataSet.Tables("Kunder").Rows.Add(newrow)
KunderBindingSource.EndEdit()
KunderTableAdapter.Update(KunddatabasDataSet)
End Sub
Attempting to save:
Private Sub Button6_Click(sender As Object, e As EventArgs) Handles SavechangedBtn.Click
KunderBindingSource.EndEdit()
KunderTableAdapter.Update(KunddatabasDataSet) ' <--- This is where the error is thrown!
End Sub

FORM RESOURCES

Similar Messages

Maybe you are looking for