Form widget sends as attachment

I am using the basic forms widget in a Muse page
It works fine, but it is sending responses as an attachment rather than in the body of the email
Attachments are always dangerous
Is there a way to change the default so that my responses are sent in the body of the email?
Thanks
jki

Hi
Muse does not have control over this , It actually depends on the email client you are using and the system itself.
For example , if you have any email scanning application , system's temp memory is full etc.
You can try to use another email in form to verify this and check the settings of client used.
Additionally , please go through these links for more information :
http://kb.mailchimp.com/article/my-emails-are-being-delivered-as-broken-html-code-or-an-at tachment/
http://www.sevenforums.com/browsers-mail/230679-email-body-shown-attachment.html
http://answers.microsoft.com/en-us/windowslive/forum/livemail-email/email-contents-become- attachment-in-windows-live/acbbf5b7-1f39-4238-8b63-d3cdfb3c778a
Thanks,
Sanjit

Similar Messages

  • Is it possible to create a standard form that can be emailed to anyone and once filled out by the receiver, have a button that the receiver clicks and the form is encrypted and attached an email back to the sender and a preset admin password would open it

    Is it possible to create a standard form that can be emailed to anyone and once filled out by the receiver, have a button that the receiver clicks and the form is encrypted and attached to an email back to the sender and a preset admin password would open it?

    Hello Graphicsguy123,
    You would need to first create the form ( or Widget in EchoSign) first to generate a url which you can paste it in the email being sent to customers. You would need to make sure you have a Document Cloud Enterprise Premium account in order to create a Widget. If you don't have the account, you can use the trial version to test it. Here is the link:
    Global Trial Registration | eSign services from Adobe
    -Rijul

  • PDF Attachment problem in Adobe form and send mail is not working

    Dear Experts,
                         Recently i'm facing a problem regarding Adobe form PDF attachment and sending an e-mail along with the PDF attachment to customer mail id.But when i execute the RFC Function module, in customer side no mail is comming. And when i check the transaction SBWP then i found that the PDF attachment hold only 1KB of data which is not right.For that i'm sending my code which i was declared in my program.Can anybody please help me to overcome this problem?
    Warm Regards,
    sameek.
    CLASS cl_bcs DEFINITION LOAD.
      DATA:
      lo_send_request TYPE REF TO cl_bcs VALUE IS INITIAL.
      lo_send_request = cl_bcs=>create_persistent( ).
      data: t_att_content_hex type SOLIX_TAB.
      DATA: lx_document_bcs TYPE REF TO cx_document_bcs VALUE IS INITIAL.
      DATA: lo_sender TYPE REF TO if_sender_bcs VALUE IS INITIAL,
            l_send type ADR6-SMTP_ADDR value 'Already provided an e-mail address here'.
      DATA: lo_recipient TYPE REF TO if_recipient_bcs VALUE IS INITIAL.
      DATA: lv_sent_to_all(1) TYPE c VALUE IS INITIAL.
    Message body and subject*
      DATA:
      lt_message_body TYPE bcsy_text VALUE IS INITIAL,
      lo_document TYPE REF TO cl_document_bcs VALUE IS INITIAL.
      APPEND 'Dear,' TO lt_message_body.
      append ' ' to lt_message_body.
      APPEND 'Please fill the attached form and send it back to us.'
      TO lt_message_body.
      append ' ' to lt_message_body.
      APPEND 'Thank You,' TO lt_message_body.
      lo_document = cl_document_bcs=>create_document(
      i_type = 'RAW'
      i_text = lt_message_body
      i_subject = 'Customer Information Form').
      TRY.
          lo_document->add_attachment(
          EXPORTING
          i_attachment_type = 'PDF'
          i_attachment_subject = 'Customer Information Form'
    I_ATTACHMENT_SIZE =*
    I_ATTACHMENT_LANGUAGE = SPACE*
    I_ATT_CONTENT_TEXT =*
    I_ATTACHMENT_HEADER =*
          i_att_content_hex = t_att_content_hex ).
        CATCH cx_document_bcs INTO lx_document_bcs.
      ENDTRY.
    Add attachment*
    Pass the document to send request*
      lo_send_request->set_document( lo_document ).
    Create sender*
      lo_sender = cl_cam_address_bcs=>create_internet_address( l_send ).
    lo_sender = cl_sapuser_bcs=>create( sy-uname ).*
    Set sender*
      lo_send_request->set_sender(
      EXPORTING
      i_sender = lo_sender ).
    Create recipient*
      lo_recipient = cl_sapuser_bcs=>create( sy-uname ).
    lo_recipient = cl_cam_address_bcs=>create_internet_address( l_send ).*
    Set recipient*
      lo_send_request->add_recipient(
      EXPORTING
      i_recipient = lo_recipient
      i_express = 'X' ).
    lo_send_request->add_recipient(*
    EXPORTING*
    i_recipient = lo_recipient*
    i_express = 'X' ).*
    Send email*
      lo_send_request->send(
      EXPORTING
      i_with_error_screen = 'X'
      RECEIVING
      result = lv_sent_to_all ).
      COMMIT WORK.
      message 'The Customer Information form has been emailed to the Employee' type 'I'.

    I am also facing issue with email send .
    apex 4.1.1 oracle 11g
    create or replace procedure email ( p_email  in    varchar2)
    is
        l_workspace_id      number;
        l_subject           varchar2(2000);
        l_body              clob;
        l_body_html         clob;
         l_email varchar2(40);
    begin
        l_workspace_id := apex_util.find_security_group_id (p_workspace => 'xyz');
        apex_util.set_security_group_id (p_security_group_id => l_workspace_id);
    l_email:= p_email;
        l_body := ' ';
        l_subject := 'You have new tasks';
        --if l_email=:P3_CONFIRM_EMAIL_ADDRESS is not null then
       -- email( l_email =>:P3_CONFIRM_EMAIL );
    -- end if;
            l_body_html := '<p />The following tasks have been added.';
         apex_mail.send (
                p_to        => l_email ,
                p_from      => '[email protected]',
                p_body      => l_body,
                p_body_html => l_body_html,
                p_subj      => l_subject );
      APEX_MAIL.PUSH_QUEUE;
    end; I also check the log and queue but both are empty,
    select * from
    apex_mail_queue
    select * from
    apex_mail_log Kindly suggest what to do ?
    I also created a process in apex , which call this procedure and pass the email address entered by user.

  • How to send an attachment with adobe form

    Hi
    in my application i have two process intiator and approval process both are adobe interactive forms,according to my scenarion i need to send an attachment(pdf or word document....)in intiatior to approval process,can pleasse tell me how to send the attachment.
    Thanks
    Raju
    Edited by: raju on Oct 7, 2008 6:39 AM

    hi!
    chk these links .
    Re: Sending Adobe Interactive Forms via Email
    Re: Saving and sending Adobe Form pdf from WebDynpro
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/176882c3-0401-0010-9fbc-d9fa1f713a73
    thanks
    vishal

  • How can I create a long employment form without making the form widget drag?

    How can I create a long employment form without making the form widget drag?

    Sorry Sachin, I mean that I created a simple form on the page from the widget and started adding fields to it. The more fields I add the slower the delay becomes in creating a new field. Even when I try to select and drag or move an item, there's a huge delay and sometimes the program feezes,  loose what i've done and have ot restart.
    I'm doing an enployment form that has more than 20 fields, at least, and I need to be able to build the fields in separate categories, like Education, Past Employment, etc... quickly without delay issues.
    I can probably send you a snap shot of what I'm talking about if I cna post it or attach it here..?
    ~Andy

  • Hi I have trouble returning a completed PDF form to sender - it looses my filled in info - how do I solve this?

    Hi I have trouble returning a completed PDF form to sender - it looses my filled in info - how do I solve this?

    Are there any dialog boxes popping up behind your Yahoo screen?
    I have intermittent problems attaching files in Yahoo mail and this is usually the reason.  I'm also using an iMac (10.7.3) and this is likely the problem.
    It is generally a Yahoo issue rather than a Mac problem.

  • Is it possible to send xls attach in mail in background ?

    is it possible to send xls attach in mail in background ?
    i build/copy program to send attach file in xls format  ,
    its work fine in foreground but do nothing in background  ,
    What can be the reason?
    the section of the sending  :
      DATA: LD_ERROR    TYPE SY-SUBRC,
            LD_RECIEVER TYPE SY-SUBRC,
            LD_MTITLE LIKE SODOCCHGI1-OBJ_DESCR,
            LD_EMAIL LIKE  SOMLRECI1-RECEIVER,
            LD_FORMAT TYPE  SO_OBJ_TP ,
            LD_ATTDESCRIPTION TYPE  SO_OBJ_NAM ,
            LD_ATTFILENAME TYPE  SO_OBJ_DES ,
            LD_SENDER_ADDRESS LIKE  SOEXTRECI1-RECEIVER,
            LD_SENDER_ADDRESS_TYPE LIKE  SOEXTRECI1-ADR_TYP,
            LD_RECEIVER LIKE  SY-SUBRC.
      LD_EMAIL   = P_EMAIL.
      LD_MTITLE = P_MTITLE.
      LD_FORMAT              = P_FORMAT.
      LD_ATTDESCRIPTION      = P_ATTDESCRIPTION.
      LD_ATTFILENAME         = P_FILENAME.
      LD_SENDER_ADDRESS      = P_SENDER_ADDRESS.
      LD_SENDER_ADDRESS_TYPE = P_SENDER_ADDRES_TYPE.
    Fill the document data.
      W_DOC_DATA-DOC_SIZE = 1.
    Populate the subject/generic message attributes
      W_DOC_DATA-OBJ_LANGU = SY-LANGU.
      W_DOC_DATA-OBJ_NAME  = 'SAPRPT'.
      W_DOC_DATA-OBJ_DESCR = LD_MTITLE .
      W_DOC_DATA-SENSITIVTY = 'F'.
    Fill the document data and get size of attachment
      CLEAR W_DOC_DATA.
      READ TABLE IT_ATTACH INDEX W_CNT.
      W_DOC_DATA-DOC_SIZE =
         ( W_CNT - 1 ) * 255 + STRLEN( IT_ATTACH ).
      W_DOC_DATA-OBJ_LANGU  = SY-LANGU.
      W_DOC_DATA-OBJ_NAME   = 'SAPRPT'.
      W_DOC_DATA-OBJ_DESCR  = LD_MTITLE.
      W_DOC_DATA-SENSITIVTY = 'F'.
      CLEAR T_ATTACHMENT.
      REFRESH T_ATTACHMENT.
      T_ATTACHMENT[] = PIT_ATTACH[].
    Describe the body of the message
      CLEAR T_PACKING_LIST.
      REFRESH T_PACKING_LIST.
      T_PACKING_LIST-TRANSF_BIN = SPACE.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM = 0.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE IT_MESSAGE LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE = 'RAW'.
      APPEND T_PACKING_LIST.
    Create attachment notification
      T_PACKING_LIST-TRANSF_BIN = 'X'.
      T_PACKING_LIST-HEAD_START = 1.
      T_PACKING_LIST-HEAD_NUM   = 1.
      T_PACKING_LIST-BODY_START = 1.
      DESCRIBE TABLE T_ATTACHMENT LINES T_PACKING_LIST-BODY_NUM.
      T_PACKING_LIST-DOC_TYPE   =  LD_FORMAT.
      T_PACKING_LIST-OBJ_DESCR  =  LD_ATTDESCRIPTION.
      T_PACKING_LIST-OBJ_NAME   =  LD_ATTFILENAME.
      T_PACKING_LIST-DOC_SIZE   =  T_PACKING_LIST-BODY_NUM * 255.
      APPEND T_PACKING_LIST.
    Add the recipients email address
      CLEAR T_RECEIVERS.
      REFRESH T_RECEIVERS.
      T_RECEIVERS-RECEIVER = LD_EMAIL.
      T_RECEIVERS-REC_TYPE = 'U'.
      T_RECEIVERS-COM_TYPE = 'INT'.
    T_RECEIVERS-NOTIF_DEL = 'X'.
    T_RECEIVERS-NOTIF_NDEL = 'X'.
      APPEND T_RECEIVERS.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
        EXPORTING
          DOCUMENT_DATA              = W_DOC_DATA
          PUT_IN_OUTBOX              = 'X'
          SENDER_ADDRESS             = LD_SENDER_ADDRESS
          SENDER_ADDRESS_TYPE        = LD_SENDER_ADDRESS_TYPE
          COMMIT_WORK                = 'X'
        IMPORTING
          SENT_TO_ALL                = W_SENT_ALL
        TABLES
          PACKING_LIST               = T_PACKING_LIST
          CONTENTS_BIN               = T_ATTACHMENT
          CONTENTS_TXT               = IT_MESSAGE
          RECEIVERS                  = T_RECEIVERS
        EXCEPTIONS
          TOO_MANY_RECEIVERS         = 1
          DOCUMENT_NOT_SENT          = 2
          DOCUMENT_TYPE_NOT_EXIST    = 3
          OPERATION_NO_AUTHORIZATION = 4
          PARAMETER_ERROR            = 5
          X_ERROR                    = 6
          ENQUEUE_ERROR              = 7
          OTHERS                     = 8.
    Populate zerror return code
      LD_ERROR = SY-SUBRC.
    Populate zreceiver return code
      LOOP AT T_RECEIVERS.
        LD_RECEIVER = T_RECEIVERS-RETRN_CODE.
      ENDLOOP.

    Try this example, not sure where I got this, but it works.
    report zmail_excel.
    parameters: p_email   type somlreci1-receiver
                                   default '[email protected]'.
    data: begin of it001 occurs 0,
          bukrs type t001-bukrs,
          butxt type t001-butxt,
          end of it001.
    data:   imessage type standard table of solisti1 with header line,
            iattach type standard table of solisti1 with header line,
            ipacking_list like sopcklsti1 occurs 0 with header line,
            ireceivers like somlreci1 occurs 0 with header line,
            iattachment like solisti1 occurs 0 with header line.
    start-of-selection.
      select bukrs butxt into table it001 from t001.
    *   Populate table with detaisl to be entered into .xls file
      perform build_xls_data .
    * Populate message body text
      clear imessage.   refresh imessage.
      imessage = 'Please find attached excel file'.
      append imessage.
    * Send file by email as .xls speadsheet
      perform send_email_with_xls tables imessage
                                          iattach
                                    using p_email
                                          'Example Excel Attachment'
                                          'XLS'
                                          'TestFileName'
                                          'CompanyCodes'.
    *      Form  BUILD_XLS_DATA
    form build_xls_data .
      constants: con_cret type x value '0D',  "OK for non Unicode
                 con_tab type x value '09'.   "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    *class cl_abap_char_utilities definition load.
    *constants:
    *    con_tab  type c value cl_abap_char_utilities=>HORIZONTAL_TAB,
    *    con_cret type c value cl_abap_char_utilities=>CR_LF.
      concatenate 'BUKRS' 'BUTXT'
             into iattach separated by con_tab.
      concatenate con_cret iattach into iattach.
      append  iattach.
      loop at it001.
        concatenate it001-bukrs it001-butxt
               into iattach separated by con_tab.
        concatenate con_cret iattach  into iattach.
        append  iattach.
      endloop.
    endform.
    *      Form  SEND_EMAIL_WITH_XLS
    form send_email_with_xls tables pit_message
                                              pit_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription.
      data: xdocdata like sodocchgi1,
            xcnt type i.
    * Fill the document data.
      xdocdata-doc_size = 1.
    * Populate the subject/generic message attributes
      xdocdata-obj_langu = sy-langu.
      xdocdata-obj_name  = 'SAPRPT'.
      xdocdata-obj_descr = p_mtitle .
    * Fill the document data and get size of attachment
      clear xdocdata.
      read table iattach index xcnt.
      xdocdata-doc_size =
         ( xcnt - 1 ) * 255 + strlen( iattach ).
      xdocdata-obj_langu  = sy-langu.
      xdocdata-obj_name   = 'SAPRPT'.
      xdocdata-obj_descr  = p_mtitle.
      clear iattachment.  refresh iattachment.
      iattachment[] = pit_attach[].
    * Describe the body of the message
      clear ipacking_list.  refresh ipacking_list.
      ipacking_list-transf_bin = space.
      ipacking_list-head_start = 1.
      ipacking_list-head_num = 0.
      ipacking_list-body_start = 1.
      describe table imessage lines ipacking_list-body_num.
      ipacking_list-doc_type = 'RAW'.
      append ipacking_list.
    * Create attachment notification
      ipacking_list-transf_bin = 'X'.
      ipacking_list-head_start = 1.
      ipacking_list-head_num   = 1.
      ipacking_list-body_start = 1.
      describe table iattachment lines ipacking_list-body_num.
      ipacking_list-doc_type   =  p_format.
      ipacking_list-obj_descr  =  p_attdescription.
      ipacking_list-obj_name   =  p_filename.
      ipacking_list-doc_size   =  ipacking_list-body_num * 255.
      append ipacking_list.
    * Add the recipients email address
      clear ireceivers.  refresh ireceivers.
      ireceivers-receiver = p_email.
      ireceivers-rec_type = 'U'.
      ireceivers-com_type = 'INT'.
      ireceivers-notif_del = 'X'.
      ireceivers-notif_ndel = 'X'.
      append ireceivers.
      call function 'SO_DOCUMENT_SEND_API1'
           exporting
                document_data              = xdocdata
                put_in_outbox              = 'X'
                commit_work                = 'X'
           tables
                packing_list               = ipacking_list
                contents_bin               = iattachment
                contents_txt               = imessage
                receivers                  = ireceivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    endform.
    Regards,
    Rich Heilman

  • How to send PDF attachment through Email For Purchase Order

    Hi,
         Can you please tell me how to send the Purchase Order with PDF attachment. Thank you.
    Thanks & Regards,
    Rani.

    Find the below example
    *& Report  ZSPOOLTOPDF                                                 *
    *& Converts spool request into PDF document and emails it to           *
    *& recipicant.                                                         *
    *& Execution                                                           *
    *& This program must be run as a background job in-order for the write *
    *& commands to create a Spool request rather than be displayed on      *
    *& screen                                                              *
    REPORT  zspooltopdf.
    PARAMETER: p_email1 LIKE somlreci1-receiver
                                        DEFAULT '[email protected]',
               p_sender LIKE somlreci1-receiver
                                        DEFAULT '[email protected]',
               p_delspl  AS CHECKBOX.
    *DATA DECLARATION
    DATA: gd_recsize TYPE i.
    Spool IDs
    TYPES: BEGIN OF t_tbtcp.
            INCLUDE STRUCTURE tbtcp.
    TYPES: END OF t_tbtcp.
    DATA: it_tbtcp TYPE STANDARD TABLE OF t_tbtcp INITIAL SIZE 0,
          wa_tbtcp TYPE t_tbtcp.
    Job Runtime Parameters
    DATA: gd_eventid LIKE tbtcm-eventid,
          gd_eventparm LIKE tbtcm-eventparm,
          gd_external_program_active LIKE tbtcm-xpgactive,
          gd_jobcount LIKE tbtcm-jobcount,
          gd_jobname LIKE tbtcm-jobname,
          gd_stepcount LIKE tbtcm-stepcount,
          gd_error    TYPE sy-subrc,
          gd_reciever TYPE sy-subrc.
    DATA:  w_recsize TYPE i.
    DATA: gd_subject   LIKE sodocchgi1-obj_descr,
          it_mess_bod LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          it_mess_att LIKE solisti1 OCCURS 0 WITH HEADER LINE,
          gd_sender_type     LIKE soextreci1-adr_typ,
          gd_attachment_desc TYPE so_obj_nam,
          gd_attachment_name TYPE so_obj_des.
    Spool to PDF conversions
    DATA: gd_spool_nr LIKE tsp01-rqident,
          gd_destination LIKE rlgrap-filename,
          gd_bytecount LIKE tst01-dsize,
          gd_buffer TYPE string.
    Binary store for PDF
    DATA: BEGIN OF it_pdf_output OCCURS 0.
            INCLUDE STRUCTURE tline.
    DATA: END OF it_pdf_output.
    CONSTANTS: c_dev LIKE  sy-sysid VALUE 'DEV',
               c_no(1)     TYPE c   VALUE ' ',
               c_device(4) TYPE c   VALUE 'LOCL'.
    *START-OF-SELECTION.
    START-OF-SELECTION.
    Write statement to represent report output. Spool request is created
    if write statement is executed in background. This could also be an
    ALV grid which would be converted to PDF without any extra effort
      WRITE 'Hello World'.
      new-page.
      commit work.
      new-page print off.
      IF sy-batch EQ 'X'.
        PERFORM get_job_details.
        PERFORM obtain_spool_id.
    Alternative way could be to submit another program and store spool
    id into memory, will be stored in sy-spono.
    *submit ZSPOOLTOPDF2
           to sap-spool
           spool parameters   %_print
           archive parameters %_print
           without spool dynpro
           and return.
    Get spool id from program called above
    IMPORT w_spool_nr FROM MEMORY ID 'SPOOLTOPDF'.
        PERFORM convert_spool_to_pdf.
        PERFORM process_email.
        if p_delspl EQ 'X'.
          PERFORM delete_spool.
        endif.
        IF sy-sysid = c_dev.
          wait up to 5 seconds.
          SUBMIT rsconn01 WITH mode   = 'INT'
                          WITH output = 'X'
                          AND RETURN.
        ENDIF.
      ELSE.
        SKIP.
        WRITE:/ 'Program must be executed in background in-order for spool',
                'request to be created.'.
      ENDIF.
          FORM obtain_spool_id                                          *
    FORM obtain_spool_id.
      CHECK NOT ( gd_jobname IS INITIAL ).
      CHECK NOT ( gd_jobcount IS INITIAL ).
      SELECT * FROM  tbtcp
                     INTO TABLE it_tbtcp
                     WHERE      jobname     = gd_jobname
                     AND        jobcount    = gd_jobcount
                     AND        stepcount   = gd_stepcount
                     AND        listident   <> '0000000000'
                     ORDER BY   jobname
                                jobcount
                                stepcount.
      READ TABLE it_tbtcp INTO wa_tbtcp INDEX 1.
      IF sy-subrc = 0.
        message s004(zdd) with gd_spool_nr.
        gd_spool_nr = wa_tbtcp-listident.
        MESSAGE s004(zdd) WITH gd_spool_nr.
      ELSE.
        MESSAGE s005(zdd).
      ENDIF.
    ENDFORM.
          FORM get_job_details                                          *
    FORM get_job_details.
    Get current job details
      CALL FUNCTION 'GET_JOB_RUNTIME_INFO'
           IMPORTING
                eventid                 = gd_eventid
                eventparm               = gd_eventparm
                external_program_active = gd_external_program_active
                jobcount                = gd_jobcount
                jobname                 = gd_jobname
                stepcount               = gd_stepcount
           EXCEPTIONS
                no_runtime_info         = 1
                OTHERS                  = 2.
    ENDFORM.
          FORM convert_spool_to_pdf                                     *
    FORM convert_spool_to_pdf.
      CALL FUNCTION 'CONVERT_ABAPSPOOLJOB_2_PDF'
           EXPORTING
                src_spoolid              = gd_spool_nr
                no_dialog                = c_no
                dst_device               = c_device
           IMPORTING
                pdf_bytecount            = gd_bytecount
           TABLES
                pdf                      = it_pdf_output
           EXCEPTIONS
                err_no_abap_spooljob     = 1
                err_no_spooljob          = 2
                err_no_permission        = 3
                err_conv_not_possible    = 4
                err_bad_destdevice       = 5
                user_cancelled           = 6
                err_spoolerror           = 7
                err_temseerror           = 8
                err_btcjob_open_failed   = 9
                err_btcjob_submit_failed = 10
                err_btcjob_close_failed  = 11
                OTHERS                   = 12.
      CHECK sy-subrc = 0.
    Transfer the 132-long strings to 255-long strings
      LOOP AT it_pdf_output.
        TRANSLATE it_pdf_output USING ' ~'.
        CONCATENATE gd_buffer it_pdf_output INTO gd_buffer.
      ENDLOOP.
      TRANSLATE gd_buffer USING '~ '.
      DO.
        it_mess_att = gd_buffer.
        APPEND it_mess_att.
        SHIFT gd_buffer LEFT BY 255 PLACES.
        IF gd_buffer IS INITIAL.
          EXIT.
        ENDIF.
      ENDDO.
    ENDFORM.
          FORM process_email                                            *
    FORM process_email.
      DESCRIBE TABLE it_mess_att LINES gd_recsize.
      CHECK gd_recsize > 0.
      PERFORM send_email USING p_email1.
    perform send_email using p_email2.
    ENDFORM.
          FORM send_email                                               *
    -->  p_email                                                       *
    FORM send_email USING p_email.
      CHECK NOT ( p_email IS INITIAL ).
      REFRESH it_mess_bod.
    Default subject matter
      gd_subject         = 'Subject'.
      gd_attachment_desc = 'Attachname'.
    CONCATENATE 'attach_name' ' ' INTO gd_attachment_name.
      it_mess_bod        = 'Message Body text, line 1'.
      APPEND it_mess_bod.
      it_mess_bod        = 'Message Body text, line 2...'.
      APPEND it_mess_bod.
    If no sender specified - default blank
      IF p_sender EQ space.
        gd_sender_type  = space.
      ELSE.
        gd_sender_type  = 'INT'.
      ENDIF.
    Send file by email as .xls speadsheet
      PERFORM send_file_as_email_attachment
                                   tables it_mess_bod
                                          it_mess_att
                                    using p_email
                                          'Example .xls documnet attachment'
                                          'PDF'
                                          gd_attachment_name
                                          gd_attachment_desc
                                          p_sender
                                          gd_sender_type
                                 changing gd_error
                                          gd_reciever.
    ENDFORM.
          FORM delete_spool                                             *
    FORM delete_spool.
      DATA: ld_spool_nr TYPE tsp01_sp0r-rqid_char.
      ld_spool_nr = gd_spool_nr.
      CHECK p_delspl <> c_no.
      CALL FUNCTION 'RSPO_R_RDELETE_SPOOLREQ'
           EXPORTING
                spoolid = ld_spool_nr.
    ENDFORM.
    *&      Form  SEND_FILE_AS_EMAIL_ATTACHMENT
          Send email
    FORM send_file_as_email_attachment tables it_message
                                              it_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription
                                              p_sender_address
                                              p_sender_addres_type
                                     changing p_error
                                              p_reciever.
      DATA: ld_error    TYPE sy-subrc,
            ld_reciever TYPE sy-subrc,
            ld_mtitle LIKE sodocchgi1-obj_descr,
            ld_email LIKE  somlreci1-receiver,
            ld_format TYPE  so_obj_tp ,
            ld_attdescription TYPE  so_obj_nam ,
            ld_attfilename TYPE  so_obj_des ,
            ld_sender_address LIKE  soextreci1-receiver,
            ld_sender_address_type LIKE  soextreci1-adr_typ,
            ld_receiver LIKE  sy-subrc.
    data:   t_packing_list like sopcklsti1 occurs 0 with header line,
            t_contents like solisti1 occurs 0 with header line,
            t_receivers like somlreci1 occurs 0 with header line,
            t_attachment like solisti1 occurs 0 with header line,
            t_object_header like solisti1 occurs 0 with header line,
            w_cnt type i,
            w_sent_all(1) type c,
            w_doc_data like sodocchgi1.
      ld_email   = p_email.
      ld_mtitle = p_mtitle.
      ld_format              = p_format.
      ld_attdescription      = p_attdescription.
      ld_attfilename         = p_filename.
      ld_sender_address      = p_sender_address.
      ld_sender_address_type = p_sender_addres_type.
    Fill the document data.
      w_doc_data-doc_size = 1.
    Populate the subject/generic message attributes
      w_doc_data-obj_langu = sy-langu.
      w_doc_data-obj_name  = 'SAPRPT'.
      w_doc_data-obj_descr = ld_mtitle .
      w_doc_data-sensitivty = 'F'.
    Fill the document data and get size of attachment
      CLEAR w_doc_data.
      READ TABLE it_attach INDEX w_cnt.
      w_doc_data-doc_size =
         ( w_cnt - 1 ) * 255 + STRLEN( it_attach ).
      w_doc_data-obj_langu  = sy-langu.
      w_doc_data-obj_name   = 'SAPRPT'.
      w_doc_data-obj_descr  = ld_mtitle.
      w_doc_data-sensitivty = 'F'.
      CLEAR t_attachment.
      REFRESH t_attachment.
      t_attachment[] = it_attach[].
    Describe the body of the message
      CLEAR t_packing_list.
      REFRESH t_packing_list.
      t_packing_list-transf_bin = space.
      t_packing_list-head_start = 1.
      t_packing_list-head_num = 0.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE it_message LINES t_packing_list-body_num.
      t_packing_list-doc_type = 'RAW'.
      APPEND t_packing_list.
    Create attachment notification
      t_packing_list-transf_bin = 'X'.
      t_packing_list-head_start = 1.
      t_packing_list-head_num   = 1.
      t_packing_list-body_start = 1.
      DESCRIBE TABLE t_attachment LINES t_packing_list-body_num.
      t_packing_list-doc_type   =  ld_format.
      t_packing_list-obj_descr  =  ld_attdescription.
      t_packing_list-obj_name   =  ld_attfilename.
      t_packing_list-doc_size   =  t_packing_list-body_num * 255.
      APPEND t_packing_list.
    Add the recipients email address
      CLEAR t_receivers.
      REFRESH t_receivers.
      t_receivers-receiver = ld_email.
      t_receivers-rec_type = 'U'.
      t_receivers-com_type = 'INT'.
      t_receivers-notif_del = 'X'.
      t_receivers-notif_ndel = 'X'.
      APPEND t_receivers.
      CALL FUNCTION 'SO_DOCUMENT_SEND_API1'
           EXPORTING
                document_data              = w_doc_data
                put_in_outbox              = 'X'
                sender_address             = ld_sender_address
                sender_address_type        = ld_sender_address_type
                commit_work                = 'X'
           IMPORTING
                sent_to_all                = w_sent_all
           TABLES
                packing_list               = t_packing_list
                contents_bin               = t_attachment
                contents_txt               = it_message
                receivers                  = t_receivers
           EXCEPTIONS
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                OTHERS                     = 8.
    Populate zerror return code
      ld_error = sy-subrc.
    Populate zreceiver return code
      LOOP AT t_receivers.
        ld_receiver = t_receivers-retrn_code.
      ENDLOOP.
    ENDFORM.
    Reward if helpful.
    Thanks,
    Kishore S N

  • Mail:send mail:attachment. Is there a simplest way to send a file as an email attachment ? or more correct ?

    <satellite:form  method="post" id="contact-form" enctype="multipart/form-data">
         <input type="file" name="adjunto" />
    </satellite:form>
    FTValList ftListaFichero = new FTValList(1);
    ftListaFichero.setValBLOB(ics.GetVar("adjunto_file"), ics.GetBin("adjunto"));
      <mail:send
           to="<%=to_emailaddress %>"
           from="<%=from_emailaddress%>"
           subject="Subject"
           body="<%=body %>" >
        <mail:attachment value='<%=ftListaFichero.getVal(ics.GetVar("adjunto_file"))%>'/>
      </mail:send>
    http://docs.oracle.com/cd/E29542_01/apirefs.1111/e39371/JSP/mail-attachment.html
    http://docs.oracle.com/cd/E29542_01/apirefs.1111/e39371/JSP/mail-send.html
    Regards,

    Simplest might well be to use javamail API instead of the two tags that Sites provides, e.g. see email - Sending mail attachment using Java - Stack Overflow for a full example.
    Phil

  • My Client is having a serious problem with the Contact Form Widget

    My Client is having a serious problem with the Contact Form Widget that I can not figure out how to correct.
    I created a website for a client and inserted a Contact Form widget on their 'Contact Us' page. Whenever anyone uses the form, the e-mail my client receive shows my e-mail address as the sender. So, when they 'reply' to the e-mail, the reply is sent to me and not the person who sent the original message. This creates a major problem in that I get barraged with e-mail replies while my client's potential customers go without a response.
    When I look at  'Site Manager > System E-Mails > Workflow Information > E-mail From Address' on the site's Admin Console, it shows my e-mail information. Is this is what needs to be changed?  If it is, what needs to be placed in that field so that the e-mail my client receives shows the senders e-mail information in the 'From' field.  My client wants to be able to click reply and have the message sent to the right party. They would be very upset if they have to cut and past the senders e-mail address from the body text on every contact they receive.
    Their feeling is that if I can't find a way to make the contact form work the way it should, then it's useless to them.
    Can anyone help me figure this out? I really don't want to disappoint my first client.

    Are you on a plan that has the CRM feature that stores your customers' data? If so, the idea of the contact form is that you'll receive a notification that there's been an inquiry filled out on your contact form and there should be a link in that email notification that leads to the "Case" that was created when that customer filled out a contact form.  You can click that link and visit the case for that customer in your BC site and reply to them from there so that all of the correspondence is logged in the CRM for safe-keeping and for your records.
    If your client finds this is too much work to login to BC to reply every time, then you should check to see if you have the "Customer Service Ticketing" feature on your hosting plan.  This is a feature where you create a dedicated email account (like [email protected]) and the BC system will automatically login to that email account and pull any emails in that inbox and convert them to a customer case for the sender of the email and then it will send out a notification via email to any of the BC Admin users you delegate as "Customer Service Agents".  Since the CST integrates with the BC CRM it lets you reply directly within the email-- but when you reply it will be going to that same email address dedicated to the CST but once the CST service checks your email again and sees that you replied to this inquiry it will log your reply against the customer's case and sends your reply via email back to them so that all the correspondance gets logged on BC's CRM but you can still reply via email.
    There's no way to use the default web forms to update the "From" or "Reply-To" address.. it must come from an approved email address to avoid spam issues.  On most web services you cannot change the "from" address anyway but usually you can at least specify the "Reply-To" address so that when someone hits "reply" in their email client it will reply to whoever you setup as the "Reply-To" address.
    Here's some more information about CST: http://kb.worldsecuresystems.com/kb/customer-service-ticketing.html?bc-partner
    I don't think the CST feature is in the webMarketing BC plan-- I think it's only in the webCommerce plan so if you have less than an webCommerce plan you have to tell your client to reply through BC by clicking the link in the notification they get.  You can justify it by saying its one or two more steps but it keeps the entire convo on record in their CRM for easy referral later.

  • With Forms Central can I set up a form to send out an automatic PDF document like a quote?

    With Forms Central can I set up a form to send out an automatic PDF document like a quote? In other words when my customer fills out the form and puts their email address on the form it automatically sends them a PDF quote on a piece of merchandise that I have. If not is Form Central compatible with Web Merge?

    Hi;
    At this time FormsCentral does not have the ability to send the PDF in the "Email Reciept", you can set up Email Reciepts to send the form filler a reciept with the form data, but it does not attach a PDF of the form. 
    FormsCentral is not compatible with Web Merge.
    Thanks,
    Josh

  • Send excel attachment with more than 255 characters in the internal table

    Hi,
    I need to send an attachment in the form of spreadsheet.
    But the internal table that is being used for sending attachment in mails can have only 255 characters in one row.
    Whereas my spreadsheet requires a greater width than 255 characters .

    Hi,
    I need to send an attachment in the form of spreadsheet.
    But the internal table that is being used for sending attachment in mails can have only 255 characters in one row.
    Whereas my spreadsheet requires a greater width than 255 characters .

  • Sending Excel attachment in E-mail

    Hi All,
    I am sending excel attachment in mail, when I see in SO01 tcode I am able to see the attachment in outbox, but getting 'Error during send Process' in sent status and not getting any mails to my e-mail id.
    Could you any one help me in this?
    Thanks in advance.
    Vijaya.

    Hi,
    data: p_email   type somlreci1-receiver
                          value 'Mail ID'.
    data: begin of it001 occurs 0,
          bukrs type t001-bukrs,
          butxt type t001-butxt,
          end of it001.
    data:   imessage type standard table of solisti1 with header line,
            iattach type standard table of solisti1 with header line,
            ipacking_list like sopcklsti1 occurs 0 with header line,
            ireceivers like somlreci1 occurs 0 with header line,
            iattachment like solisti1 occurs 0 with header line.
    start-of-selection.
      select bukrs butxt into table it001 from t001.
      Populate table with detaisl to be entered into .xls file
      perform build_xls_data .
    Populate message body text
      clear imessage.   refresh imessage.
      imessage = 'Please find attached excel file'.
      append imessage.
    Send file by email as .xls speadsheet
      perform send_email_with_xls tables imessage
                                          iattach
                                    using p_email
                                          'Example Excel Attachment'
                                          'XLS'
                                          'TestFileName'
                                          'CompanyCodes'.
         Form  BUILD_XLS_DATA
    form build_xls_data .
    constants: con_cret type x value '0D',  "OK for non Unicode
                con_tab type x value '09'.   "OK for non Unicode
    *If you have Unicode check active in program attributes thnen you will
    *need to declare constants as follows
    *class cl_abap_char_utilities definition load.
    constants:
        con_tab  type c value cl_abap_char_utilities=>horizontal_tab,
        con_cret type c value cl_abap_char_utilities=>cr_lf.
      concatenate 'BUKRS' 'BUTXT'
             into iattach separated by con_tab.
      concatenate con_cret iattach into iattach.
      append  iattach.
      loop at it001 .
        concatenate it001-bukrs it001-butxt
               into iattach separated by con_tab.
        concatenate con_cret iattach  into iattach.
        append  iattach.
      endloop .
    endform.
         Form  SEND_EMAIL_WITH_XLS
    form send_email_with_xls tables pit_message
                                              pit_attach
                                        using p_email
                                              p_mtitle
                                              p_format
                                              p_filename
                                              p_attdescription.
      data: xdocdata like sodocchgi1,
            xcnt type i.
    Fill the document data.
      xdocdata-doc_size = 1.
    Populate the subject/generic message attributes
      xdocdata-obj_langu = sy-langu .
      xdocdata-obj_name  = 'SAPRPT' .
      xdocdata-obj_descr = p_mtitle .
    Fill the document data and get size of attachment
      clear xdocdata.
      read table iattach index xcnt.
      xdocdata-doc_size =
         ( xcnt - 1 ) * 255 + strlen( iattach ).
      xdocdata-obj_langu  = sy-langu.
      xdocdata-obj_name   = 'SAPRPT'.
      xdocdata-obj_descr  = p_mtitle.
      clear iattachment.  refresh iattachment.
      iattachment[] = pit_attach[].
    Describe the body of the message
      clear ipacking_list.  refresh ipacking_list.
      ipacking_list-transf_bin = space.
      ipacking_list-head_start = 1.
      ipacking_list-head_num = 0.
      ipacking_list-body_start = 1.
      describe table imessage lines ipacking_list-body_num.
      ipacking_list-doc_type = 'RAW'.
      append ipacking_list.
    Create attachment notification
      ipacking_list-transf_bin = 'X'.
      ipacking_list-head_start = 1.
      ipacking_list-head_num   = 1.
      ipacking_list-body_start = 1.
      describe table iattachment lines ipacking_list-body_num.
      ipacking_list-doc_type   =  p_format.
      ipacking_list-obj_descr  =  p_attdescription.
      ipacking_list-obj_name   =  p_filename.
      ipacking_list-doc_size   =  ipacking_list-body_num * 255.
      append ipacking_list.
    Add the recipients email address
      clear ireceivers.  refresh ireceivers.
      ireceivers-receiver = p_email.
      ireceivers-rec_type = 'U'.
      ireceivers-com_type = 'INT'.
      ireceivers-notif_del = 'X'.
      ireceivers-notif_ndel = 'X'.
      append ireceivers.
      call function 'SO_DOCUMENT_SEND_API1'
           exporting
                document_data              = xdocdata
                put_in_outbox              = 'X'
                commit_work                = 'X'
           tables
                packing_list               = ipacking_list
                contents_bin               = iattachment
                contents_txt               = imessage
                receivers                  = ireceivers
           exceptions
                too_many_receivers         = 1
                document_not_sent          = 2
                document_type_not_exist    = 3
                operation_no_authorization = 4
                parameter_error            = 5
                x_error                    = 6
                enqueue_error              = 7
                others                     = 8.
    endform.
    Check this Sample code.
    Thanks,
    Durai.V

  • Sending Multiple attachements (PDF) in a single email

    Hello All,
    I came across below link but could not understand.
    How to send multiple attachements in single mail
    Any idea how i can send email with Multiple attachements (PDF format files). Thanks.

    Smart Form PDF Link
    http://help.sap.com/bp_presmartformsv1500/DOCU/OVIEW_EN.PDF
    http://sap.ionelburlacu.ro/sap0/sapsf001.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/a9/de6838abce021ae10000009b38f842/frameset.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
    http://help.sap.com/saphelp_nw2004s/helpdata/en/16/a369b1800e4bdda978ee0fe3b7bd2c/content.htm
    http://help.sap.com/saphelp_nw04s/helpdata/en/a5/de6838abce021ae10000009b38f842/content.htm
    http://www.sap-basis-abap.com/sapsf001.htm
    http://www.sap-img.com/smartforms/smart-001.htm
    Rewards if useful................
    Minal

  • Need HELP - Need to send MIME attachements, not UU-encoded.

    Some important recipients are unable to view attachments I send them b/c Mail, by default, sends UU-encoded attachements instead of MIME attachements.
    Is there any way to configure Mail to send MIME attachements?
    FYI to any other people having problems SENDING attachements (this took a while to figure out):
    Google, Yahoo, and some other mail services are not particularly UU-encoding friendly, and the recipients at those addresses sometimes receive a bunch of garbled 'code' or 'script' instead of the actual attachment file.
    I've read lots on these discussions from people trying to deal with READING MIME attachements that other people have sent them, but cannot find any info on switching the SENT preferences to use UU encoding for attachments instead of MIME.
    If anyone can clarify, PLEASE, PLEASE HELP.
    I use .mac to sync my 2 Mac Pros, MB Pro, iPhone, and three Mac Minis, so I'd really like to keep everything 'in sync' with Apple apps. Otherwise I'll have to switch to Entou-rage or Mozilla, which I don't really want to do...
    Thanks in advance for any insight or advice...
    - Sarge

    I've taken the liberty of re-arranging your question for clarification.
    Sarge_ wrote:
    Some important recipients are unable to view attachments I send them b/c Mail, by default, sends UU-encoded attachements instead of MIME attachements.
    I've read lots on these discussions from people trying to deal with READING MIME attachements that other people have sent them, but cannot find any info on switching the SENT preferences to use UU encoding for attachments instead of MIME.
    Which one do you want to use? UU or MIME?
    I do not think that Apple Mail sends UU-encoded attachments. UU is really old.
    There are two settings that can fundamentally change the way Apple Mail sends messages.
    1) Plain text vs. Rich text. With plain text you can't change the fonts or colors or anything else. There is a slight possibility that this mode sends UU attachments, but I can't check from the PC in front of me. Still, I doubt it. Rich text allows fancy fonts and colors.
    2) Send Windows-friendly attachments. This will prevent Apple Mail from sending Macintosh-specific information in an e-mail message. In all cases, Apple Mail only sends standards-forming MIME e-mail messages, but many (all?) PC e-mail clients barf on this 100%-legal MIME e-mail message.
    Is there any way to configure Mail to send MIME attachements?
    Make sure that Windows-friendly attachments is turned on. The only downside is that other Mac users might not get resource data or might have problems with files lacking extensions. No one should be using resource data or files without extensions anymore, so this question is moot. If you do need to do that, wrap your files in a ZIP.
    Google, Yahoo, and some other mail services are not particularly UU-encoding friendly, and the recipients at those addresses sometimes receive a bunch of garbled 'code' or 'script' instead of the actual attachment file.
    This may happen regardless of what you do.
    If anyone can clarify, PLEASE, PLEASE HELP.
    Here is a little write-up I did a few years back on this issue. According the the Apple discusssion regulations, I should say that I do sell a MIME-decoding tool through the link above. However, that tool will not help you send MIME e-mail messages. I'm not trying to sell you anything. These days, any decent e-mail client can handle either UU or MIME messages with no problem. There are a few notable exceptions to this, and unfortunately, those exceptions tend to have millions of customers. It is getting better though.

Maybe you are looking for