Form with view having instead-of-trigger gives FRM-40501 and ORA-02014
I created a data-entry from with a 'view' as datas-source block. This view gives crosstab query results with a data from a single base-table but it is complex and uses decode and aggregate funciton 'max' just to create group by in a crosstab query. I have created a instead of trigger on this view to update or insert a record in base table. A test to update base table works fine at SQl prompt. A test to insert at SQL shows '1 row created' but in fact when I query the database, it does not show newly inserted row. Also, when I compile and run this form, I get FRM-40501 and ORA-02014. Help!!!
I know that DML operations on a view with DECODE, aggregate functions or group by can not be performed but I thought the "instead of" trigger on the view to update the base table should eleminate this restriction and hence pusued further but now stuck!
BTW: I can post details of base table, view, and instead of trigger, if you want to see them to further decipher the problem. Just let me know. Thanks!
VERSIONS: Forms in developer suite v10.1.2.0.2 on Windows XP 64 bit desktop - ; Backend database: 9.2.0.8 on Windows 2003 EE server
Edited by: user8647268 on Aug 19, 2009 1:19 PM
Edited by: user8647268 on Aug 19, 2009 1:25 PM
I just forgot to ask you one question: In my experience with forms, I have captured before_value and after_value and implemented logic based on results many times. This form I am working on is kinda first multi-record form where I have a tabular page with date and about 7 other columns forming a grid of cells, which users wanted. Each line is a record from a view. I tried relying on forms to do DML on underlying table and since the underlying table is a paritioned table, I ran into FRM-40509 and ORA-00936, where returning ROWID becomes problematic. I found a note 167550.1 which says to set Key mode to 'Updateable' or 'Non-Updateable' but not 'Unique' or 'Automatic' as a solution #1. Solution#1 failed i.e. the errors persisted. The note also says in that case, implement Solution #2, which is to write explicit trigger to do each of the DML on view. Here I run into kinda problem: In a tabular form with say 31 records each row having 7 cells which is like capturing 217 before values..that is too many. Addressing them with ':old.xxx' or ':new.xxx' which works in instead of trigger, does not work in trigger inside forms. Without checking these before and after values, it inserts rows with nulls for empty cells where we wnated it to skip and do nothing. So iam looking for a way to capture before value using some kinda standard form mechanism..Do you have any suggestions! (Sorry for long explanation but that is the only way to do it..)
Similar Messages
-
BULK INSERT into View w/ Instead Of Trigger - DML ERROR LOGGING Issue
Oracle 10.2.0.4
I cannot figure out why I cannot get bulk insert errors to aggregate and allow the insert to continue when bulk inserting into a view with an Instead of Trigger. Whether I use LOG ERRORS clause or I use SQL%BULK_EXCEPTIONS, the insert works until it hits the first exception and then exits.
Here's what I'm doing:
1. I'm bulk inserting into a view with an Instead of Trigger on it that performs the actual updating on the underlying table. This table is a child table with a foreign key constraint to a reference table containing the primary key. In the Instead of Trigger, it attempts to insert a record into the child table and I get the following exception: +5:37:55 ORA-02291: integrity constraint (FK_TEST_TABLE) violated - parent key not found+, which is expected, but the error should be logged in the table and the rest of the inserts should complete. Instead the bulk insert exits.
2. If I change this to bulk insert into the underlying table directly, it works, all errors get put into the error logging table and the insert completes all non-exception records.
Here's the "test" procedure I created to test my scenario:
View: V_TEST_TABLE
Underlying Table: TEST_TABLE
PROCEDURE BulkTest
IS
TYPE remDataType IS TABLE of v_TEST_TABLE%ROWTYPE INDEX BY BINARY_INTEGER;
varRemData remDataType;
begin
select /*+ DRIVING_SITE(r)*/ *
BULK COLLECT INTO varRemData
from TEST_TABLE@REMOTE_LINK
where effectiveday < to_date('06/16/2012 04','mm/dd/yyyy hh24')
and terminationday > to_date('06/14/2012 04','mm/dd/yyyy hh24');
BEGIN
FORALL idx IN varRemData.FIRST .. varRemData.LAST
INSERT INTO v_TEST_TABLE VALUES varRemData(idx) LOG ERRORS INTO dbcompare.ERR$_TEST_TABLE ('INSERT') REJECT LIMIT UNLIMITED;
EXCEPTION WHEN others THEN
DBMS_OUTPUT.put_line('ErrorCode: '||SQLCODE);
END;
COMMIT;
end;
I've reviewed Oracle's documentation on both DML logging tools and neither has any restrictions (at least that I can see) that would prevent this from working correctly.
Any help would be appreciated....
Thanks,
SteveThanks, obviously this is my first post, I'm desperate to figure out why this won't work....
This code I sent is only a test proc to try and troubleshoot the issue, the others with the debug statement is only to capture the insert failing and not aggregating the errors, that won't be in the real proc.....
Thanks,
Steve -
Scrollbars problem when running a form with Sun Java instead of Jinitiator
Hi All;
Our forms are configured to run with the Sun Java instead of
Jinitiator; functionality wise everything works fine, but when running
the forms on the web there are 2 extra scrollbars
(one vertical and one horizontal) in addition of the browser scrollbar.
Note: This is does not happen when running the same form with Jinitiator (same configurations)
Anyone encountered this situation or has an idea how to to get ride of the extra scrollbars ???
Thanks.Thanks for your replay.
I was able to make all forms working without scrollbars when running form developer at the desktop (windows os) without scrollbars
but when I run them at the application server (Linux Red Hat 3 Enterprise), scrollbars are still there.
I tried your suggestion but did not help
here is the formsweb configuration
[jdk15]
baseHTML=base.htm
jpi_classid=clsid:CAFEEFAC-0015-0000-FFFF-ABCDEFFEDCBA
jpi_codebase=http://server_name:port/forms/jinitiator/jre15012.exe#Version=1,5,0,12
jpi_mimetype=application/x-java-applet;jpi-version=1.5.0_12
jpi_download_page=http://server_name:port/forms/jinitiator/jdk_download.htm
baseHTMLJInitiator=basejpi_with_disableMDIScrollbars_param.htm
archive=frmall.jar
separateFrame=False
splashScreen=no
background=no
width=975
height=575
form=xxxxx.fmx
lookandfeel=Generic
logo=no
otherparams=useSDI=yes
The window get maximized at when-new-form-instance.
Does it has to do with the canvas or window height and width at the design time????
Thanks. -
Call a Form with its name instead of its number
instead of using : http://servername:7777/pls/portal30/PORTAL30.wwa_app_module.new_instance?p_moduleid=1556977996
I'd like not to use ModuleID but module name instead. Is it possible?Hi,
What you need to do is the following:
1. Create a link for your form component in Portal, e.g. the link is: Link_to_your_module.
2. Put in the following code in where you want to call the module:
Declare
url varchar2(100);
begin
url := PORTAL30.wwv_user_utilities.get_url ('yourapp.LINK_TO_your_module');
portal30.wwv_redirect.url(p_url =>url);
end;
Hope this works!
Kelly. -
Win 7
Firefox 5
Problem with high memory use.
restarted
Plugin buttons gone from toolbar/
Missing plugins still show in plugin manager but buttons missing from toolbar add buttons pane.
Tried reset toolbars - no difference.
Tried re-instal of Firefox 5 - no difference except:
Session manager offers correct session on startup but starts with last sessionIn case you are using "Clear history when Firefox closes":
*do not clear the Browsing History
*Firefox > Preferences > Privacy > Firefox will: "Use custom settings for history": [X] "Clear history when Firefox closes" > Settings
*https://support.mozilla.org/kb/remove-browsing-search-and-download-history
Note that clearing "Site Preferences" clears all exceptions for cookies, images, pop-up windows, software installation, passwords, and other website specific data.
You can check for problems with the sessionstore.js and sessionstore.bak files in the Firefox profile folder that store session data.
*Help > Troubleshooting Information > Profile Directory: Show Folder (Linux: Open Directory; Mac: Show in Finder)
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Multiple_profile_files_created
Deleting sessionstore.js will cause App Tabs and Tab Groups and open and closed (undo) tabs to get lost and you will have to recreate them (make a note or bookmark them if possible). -
Errors FRM-40505 and ORA-03114 after cancel a query in a form
I have a Form (i'm working with 10g, i.e., Web) with property "interaction mode=non-blocking", and after execute the query, it pops-up the cancel query window, but when cancelled, the connection with the database is dropped.
Someone knows why it happens?
Thx.
DFL
Mensaje editado por:
user455562That could possibly be bug 1942743
The fix is to set the parameter pushjoin_predicate=false in the init.ora of your database. -
Frm-40375 and ora-306500 with ODBC connection
Hi experts,
I am getting frm-40375 , ora-306500 when clicking a button on form , the code behind the button is actually connecting to a database other than oracle using the ODBC connection and importing data in variables and than inserting in an oracle table.
The error only appears on other PCs and not on my pc , means there is no problem in the code and is working fine on my pc (importing the desired data when using my pc).
The question is what is missing on other PCs or in other words what is additional component in my PC.
Please tell when and why this ora-306500 occurs.
Hope I defined the problem correctly.
(the following is part of the code
connection_string:='user/pass123@ODBC:abcd123';
connection_id := EXEC_SQL.OPEN_CONNECTION(connection_string);
cursorID := EXEC_SQL.OPEN_CURSOR(connection_id);
Using Oracle 9i Database
and 6i Forms
Thanks in advance
Edited by: zulfffi on Jun 29, 2010 11:08 PMora-306500I seriously doubt this is actual error code.
AFAIK - Oracle errors have not yet reached 6 decimal places.
please use COPY & PASTE in the future -
ERROR - 16016 - FOR FORM CREATED ON A VIEW AND USING INSTEAD OF TRIGGER
I have created a form based on a view. The view has instead of Trigger on it.
When I try to update the form I get the following error:
Error: An unexpected error occurred: ORA-22816: unsupported feature with RETURNING clause (WWV-16016)
Can anyone tell what the problem is?
Thanks
nullTHANKS A LOT IT WORKED.
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Rene' Castle ([email protected]):
This is a bug with views. If you can edit the PL/SQL code that is generated, you can remove the RETURNING clause and it will work.
NOTE: This will have to be done every time you edit the form.
<HR></BLOCKQUOTE>
null -
Instead of trigger on view with CLOB data
I have writed Instead of trigger for view "article(id,text)" with CLOB
field "text".
create or replace trigger v_article_insert
instead of insert on v_article
for each row
declare
begin
insert into article(id,text) values(id,:new.text);
end v_article_insert;
When I try to do DML (insert, update), forexample:
insert into v_article(text) values('bla-bla')
I get:
ORA-25008 no implicit conversion to LOB datatype in instead-of trigger.
( Cause: When inserting or updating a view using instead-of trigger, the
new value for a LOB view column is of a different datatype.
Action: Specified a LOB value as the new value for the LOB view
column.)
insert into v_article(text) values(empty_clob()) - It works...
What does it mean and what is right syntax for DML for CLOB fields in
instead of triggers?When inserting CLOBs you create the row with an Empty_Clob() to initialize the CLOB field. Then you can update the empty CLOB with your CLOB value.
The error message is telling you that Oracle will not convert your CLOB to the initialization value needed. -
[PLEASE] Prob with instead of Trigger [URGENT !]
Hi,
I have an INSTEAD OF TRIGGER on a view which update 2 based tables.
Each time the user update information,the system processes the update operation and insert a new row into the base tables.None of the based tables has any trigger.
Why this insertion occures ? How can i stop it and update only the based tables without inserting the same row ?
Thks for your advice
lamine
SQL> CREATE OR REPLACE TRIGGER UPDATE_PP_TR
SQL> INSTEAD OF UPDATE ON V_CONTACTS1_PP
SQL> FOR EACH ROW
SQL> begin
SQL> update ORGANIZATIONS
SQL> set
SQL> org_name = nvl(:new.org_name,org_name)
SQL> .....
SQL> ,updated_by = v('USER')
SQL> ,updated_date = sysdate
SQL> where org_id = :new.org_id;
SQL> update INDIVIDUALS
SQL> set
SQL> ,gender = nvl(:new.gender,gender)
SQL> ,first_name = nvl(:new.first_name,first_name)
SQL> ,last_name = nvl(:new.last_name,last_name)
SQL> ......
SQL> ,updated_by = v('USER')
SQL> ,updated_date = sysdate
SQL> where org_id = :new.org_id;
SQL> end UPDATE_PP_TR;Thks Andrew for your reply,
The INSTEAD OF trigger doesn't insert new row as i said before.... apologies.... It processes 2 things:
- update the field with the new value (what i want)
- Replace any existing data that has the same reference_key by the new value.
If we change the email of an individual and it happens that they are many people in the same company,then the INSTEAD OF TRIGGER updates the email and replace the other employees records by the one that has been updated.
But if the company employes only 1 person then the process is ok.It's bizarre only for many employees in the same company.
i.e:
Martin Tom , [email protected], FRANCE SOFT
Paul Henri, [email protected], FRANCE SOFT
Jason Case, [email protected], FRANCE SOFT
If i update Martin Tom's email to [email protected], Paul and Jason would be replace by Marin Tom's record....
Martin Tom , [email protected], FRANCE SOFT
Martin Tom , [email protected], FRANCE SOFT
Martin Tom , [email protected], FRANCE SOFT
Maybe my instead of trigger is written improperly.....
Any advise ? -
Is it possible to hv a FORM with out Print Prog.?
Hi Experts,
1) Is it possible to hv a smart form with out having the Print/driver prog.?
coz, I checked in TNAPR tbl, I did not find any entry!
I guess, NACE wuld do give some info?
2) How Can I know that my_z_form_1 created in Which SAP version?
3) How it wuld appear the icon of TABLE node in 4.6? Is it "Lines with in Square box"?
Pls. clarify.
thanq.
Message was edited by:
Srikhar
Message was edited by:
Srikhar1) Is it possible to hv a smart form with out having the Print/driver prog.?
coz, I checked in TNAPR tbl, I did not find any entry!
I guess, NACE wuld do give some info?
Answer : No,there should be print program for each smart form.
NACE Will give only SD,MM module form name and print progrms.
2) How Can I know that my_z_form_1 created in Which SAP version?
Answer : Currently SAP Does not support version management for SAP Script.
and Smartforms.You just compare with Production system
3) How it wuld appear the icon of TABLE node in 4.6? Is it "Lines with in Square box"?
Use Main window -> Create - > Table
and proceed further...
Thanks
Seshu -
Error in generating form with 6i
I have installed designer 6i rel 2 with form developer 6i on NT
4.0.
When in design editor, I want to generate the form with generate
module, the system generate "CDR-21600: A running Generator or
Utility has failed."
Also in action column writes: " It is possible that the internal
cache is now in an inconsistent state. You are therefore
recommended to close and restart the application."
Could anyone tell me what is the problem and how to solve it.
thanksHere is an document which describes some known causes of CDR-
21600 errors. I hope it will help you.
PURPOSE
To describe some known causes of CDI-21600 errors and to
suggest possible solutions and workarounds.
SCOPE & APPLICATION
This note was written for users of Oracle Designer releases 2.1.x
and 6.0.
CDI-21600 errors occur most frequently during Design Capture and
when generating forms with the Forms and WebServer generators.
Investigating CDI-21600 errors
In Oracle Designer Release 2.1.2 and Release 6.0, this error has
the form:
CDI-21600 'A running generator or utility has failed'
The Release 2.1.1 error message was: 'Generator or Utility throw
an Exception'
The CDI-21600 error message means that the generator is hitting
an unhandled exception, also known as a GPF (general protection
fault). The CDI-21600 error masks the underlying exception error.
To see the real error do the following:
1. Go into the Registry Editor (REGEDIT).
2. Navigate to HKEY_LOCAL_MACHINE\software\oracle\des2_70
3. Set EXCEPT_HANDLING to 0 (by default it is 1).
Repeat the action that resulted in the error.
Known Causes of CDI-21600 Errors and Possible Solutions
Some of the reasons why CDI-21600 errors occur are listed below.
1. A common cause of CDI-21600 errors is failure to install the
necessary
Developer patches.
See [NOTE:64630.1] Developer Patches required to run
Designer with Developer
2. Check that Designer is running on a supported database. Also
check that the
TNS connection is correct.
See [NOTE:60705.1] Designer Certification Matrix (HTML)
3. Check for 'dangling' foreign keys, in other words FKs no longer
owned by any
table in the repository. Delete all invalid constraints.
Invalid constraints may be created if you use the repository
dump utility to
dump and restore external foreign keys referencing tables
shared into the
application system, without dumping and restoring the tables
that own them.
If you restore a complete dump (rather than a 'skeleton' one),
and then use
the 'Reconnect Share Links' option when restoring, you may be
able to
resolve this problem.
To get a complete list of 'dangling' constraints in your
repository, connect
using SQL*Plus and use the following query:
SELECT app.name, key.name
FROM ci_application_systems app, ci_constraints key
WHERE key.table_reference IS NULL
AND key.application_system_owned_by = app.id;
You can also run CKAZANAL.ANAL_REFERENCES on your
repository and delete all
the invalid constraints that it finds. You can run the Repository
Analyzer
from: Front Panel -> Repository Administration Utility -> Utilities.
NOTE: There may be inconsistencies in the repository that the
Repository
Analyzer cannot fix. You might solve such problems by
dropping all the
tables of your application, recreate them from the ERD,
then use the
DDT and recreate your modules.
[BUG:847190] CDI-21600 during forms generation: 'dangling'
foreign key
"Since the generator is running on a repository that contains
invalid
constraints and the Repository Analyzer solves the problem,
bug closed as
unfeasible to fix."
4. Check your modules for invalid or missing references such as
missing window
placements.
5. Try generating your module against default templates and
object libraries.
6. When capturing forms or libraries, try capturing the form or
library without
application logic, then capture the application logic on its own.
See [NOTE:1064690.6] CDI-21600 when capturing design of
form with
application logic
[BUG:757541] DESCAP: CDI-21600 error reported when
capturing with
application logic
Fixed In Ver: 6.0
[BUG:926383] Duplicate of [BUG:757541] This has been fixed in
2.1.2 patch
779559. However you would be advised to apply a later patch
such as 855635
which fixes more bugs in this area.
7. Make sure that all objects that are referenced by the form have
been
captured into the repository before capturing the form.
8. A CDI-21600 will occur if a lookup usage displays only one
column of
datatype DATE or if the column of datatype DATE is displayed
as the first
item in the block.
Workaround
Add more column usages to the lookup block and do not
display the DATE data
type column usage as the first item in the block.
9. [BUG:810472] CDI-21600 when 'Argument in Caller' is set
Fixed In Ver: 6.5.3.0
Workaround
Make sure that you have an argument in the called module that
is mapped to
the "Argument Passed Value" in the calling module. The only
way to get this
mapping back once the APV has the <Module Argument> label
is to delete it
and recreate it.
10. [BUG:801736] CDI-21600 on design capture of a form with
subclassed object
Fixed In Ver: 6.0.3.1.0 (backport)
Fixed In Ver: 6.5
You have an item that has been subclassed to an object.
Checking the Design
Capture option 'Capture Control Blocks' causes the CDI-21600
error. Uncheck
'Capture Control Blocks' and the problem does not occur. Open
the FMB in
Forms*Builder and look at Data Blocks -> Items. Break the link
to the
object, save the FMB, and the form will capture (similar to
[BUG:794872]).
Alternatively, ensure the link can be established.
11. [BUG:850436] CDI-21600 on generation of a form with template
having
subclassed object group
You try to generate a form out of Designer that uses a user-
defined
template. If a collection of objects in the template is grouped
into an
object group, dragged into the object library and then either
copied or
subclassed into a form, when the form is generated you get a
CDI-21600
error.
12. [BUG:822659] Module generation fails (CDI-21600) with multi-
column PK having
long prompt text
Fixed In Ver: 6.5.3.2
Module generation with multi-column primary key having long
prompt text
causes CDI-21600 with preference MSGSFT set.
Workaround
Shorten the prompt text of PKs may not be not applicable. You
may loose end
user information.
You may have the same problem with a mandatory compound
FK. CASEOFG tries to
generate a message '<P1> must be entered', where <P1>
contains all the
prompts of the bound items from the FK. If you reduce the
length of the
prompts, or set MSGSFT = NULL or WEDI = S or property
Mandatory?=No, it
works correctly.
13. [BUG:792542] Capturing application logic causes CDI-21600
(V2 style
triggers)
Fixed In Ver: 6.5.5
After removal of the v2 triggers, the form captures/merges OK
on 5.0.24.8,
provided patch 875027 has not been applied.
14. [BUG:790877] CDI-21600 if the primary/foreign keys have no
key components
Fixed In Ver: 6.5.11
Generating a module with tables having a primary key not
correctly defined
(no PK component) will cause a CDI-21600 error. This can
occur when
unloading a module from the RON. If you pick up the module
(and only the
module) in the unload set, the table and its PK are unloaded as
a skeleton.
Loading the .DAT file into a new application will create a PK
without a
component.
15. [BUG:771549] CDI-21600 if cannot connect to the DB with
connect string in
Options (Compile)
Fixed In Ver: 6.5.13
If you cannot connect to the DB with the connect string
specified in options
(Compile), the forms generator will fail with CDI-21600.
This problem occurs when you cannot connect to the DB
because:
- the username or password is wrong;
- or the SQL*Net alias is not defined in the TNSNAMES.ORA
file;
- or the SQL*Net listener is not started;
- or the DB is down.
16. [BUG:785106] CDI-21600 when generate master detail form
with preserve layout
[BUG:855812] is a duplicate of this bug.
Fixed In Ver: 5.0.24.6.0 (Bug:860426 Backport request for 2.1.2)
Fixed In Ver: 6.0
Fixed In Ver: 6.5.3
You have a master-detail Form with the Master having items
partly on a TAB
Canvas. Generate Module works OK. You enter Forms Builder
and move some
items on the tabs (just small changes, items are still on the
same tabs).
You change the look of the Detail and change Records
Displayed. Now in
Designer you generate the Module with Preserve Layout. You
get a CDI-21600
error. The problem might reproduce without doing any changes
in Forms
Builder, just by generating with Preserve Layout.
17. [BUG:891306] If primary key column of lookup in check
constraint comment of
base table
Fixed In Ver: 6.5.5
Workaround
Do not use the name of the bound item that is based on the
primary key
column of the lookup table in a check constraint comment of
the base table.
18. [BUG:896026] Forms gen throws assertion failure in
CVINI/BUILDACTIONITEM@/CV/CVI/CVIBNI.CPP
Fixed In Ver: 6.5.7
A problem is caused by a PL/SQL definition (function, package,
procedure)
being defined as a called module for the module you are trying
to generate.
To resolve the problem and enable the module to be generated,
remove all
Called Modules that are PL/SQL definitions (functions,
procedures or
packages).
See [NOTE:2107207.6] CDI-21600 during generation of module
or Assertion
Failure \cv\cvi\cvibni.cpp
19. [BUG:812333] CDI-21600 generating a web module after
adding an unbound item
Fixed In Ver: 6.5.3.0
Backport [BUG:1280667] raised to fix by 6.0.3.9
You add an unbound item (SQL expression) to a Web module.
When you try to
generate the module you get a CDI-21600 error. If you delete the
unbound
item the Web module generates correctly.
In a test case the problem occurred during validation of the
derivation
text, if the master module component was in a different module.
A workaround
was to rearrange module components so that this was not the
case.
20. [BUG:1627963] CCVDIAG::TRACEGENERATORMESSAGE
WHEN GENERATING INCORRECT
DERIVATION EXPRESSION
Message
CDR-21605: Failed while processing Module <mod> in function
CCVDiag::TraceGeneratorMessage BOF
Cause
The generator failed due to an unexpected error - the
error indicates the object the generator was processing
when it failed.
Helena -
Filling in forms with adobe reader in firefox on ubuntu64
Hi
I am trying to fill in pdf forms with adobe reader 8.12 in firefox 3.03 and ubuntu64 8.04.
The forms display in firefox and I can check boxes, but when I try to select a text box I am unable to type. I can enter text by right clicking on the box and pasting. I also cannot use tab to move between boxes.
If I save a pdf to disk and open it with adobe reader then I can enter text and cycle through boxes with tab.
Sometimes I am unable to load pdfs in firefox that I have viewed before. When I click on the link a blank page is displayed. I can open them if I set firefox to open them externally with acroread rather than in the browser window.
Thanks for any help.
PaulIt's completely up to the IRS to create a form where the information fits in the field. There is nothing you can do with Reader since it is simply what it is called, a reader.
For you to change the document properties would require using the full version of Acrobat. -
Fillable form with multiple pages
I have a fillable form with multiple pages. However, when I save it and open it, it tabs to the end of the first page and will go back up to the top of the first page again. It won't tab to the second page. Instead, the user will have to click there cursor into the first field of the second page, tab through that, and repeat this process from page to page. If the person doesn't know there are multiple pages, they may believe they have finished the form once they get to the bottom of the first page, hit tab, and it takes them back up to the first field on the first page again. How can I make it go from the last field on the first page, tab, and first field on the second page?
Thanks for the reply. Since my post to this topic I discovered some things about tabbing. With out adding another master page but just keeping the one and making sure that it's occurance is set to a minimum of one and including master page in the numbering it will work as long as the order of fields in the hierarchy tab matches the order in the position of the fields.
I have a subForm that has a row of fields starting with a button then several text fields. I couldn't tab to the next page because the button was at the bottom of the hierarchy and it wasn't until I moved it to the top that I could finally tab to the next field on the next page. I also discovered that with a one page dynamic interactive form that has some expand able text fields in it and when the field expands so that any fields are pushed to a new second page tabbing seems to not work. In other words when I tab out of that field that is suppose to expand and a new page is added to the form the tabbing quits and in order for it to resume I have to click in a field and from then on it work even if it gets to where a third page and so forth is added. It is just when a one page (in my case) form turns into multiple pages for the first time.
Hope that makes sense. -
I am using Dreamweaver CS3 on a MacBook and have recently started experiencing frustrating problems in using Dreamweaver.
Very recently I am now no longer able to see the current CSS displayed for the element I wish as when I click on it at the bottom of the page, it will only display an element further up the hierarchy (see screenshot http://imageshack.us/photo/my-images/651/screenshot20120224at093.jpg/) . You can see that I would like to see the details for ul but it won't show anything but #mainContainer.
I am also experiencing other problems on some (not all) sites I work on such as text and images disappearing in design view. I can get them back by toggling the show CSS button but it is getting very annoying as I have to do this after nearly every change I make. I have read other posts about this problem on this forum as I am not the only one and have tried repairing fonts as suggested but it hasn't made any differnce. The sites where I seem to be experiencing this involve jQuery sliders and galleries so am not sure if there is some kind of conflict here.
I have reinstalled Dreamweaver this morning to see if this would cure my problems but unfortunately it hasn't.
I would really like an answer to my first problem of not being able to view current CSS as I think this is a Dreamweaver issue and nothing to do with any coding as such but mention the other problem in case it is related and also hoping for a resolution for that as well.
Many thanks
LisaThat Intel Pentium message is misleading and you can normally ignore it I don't think it is related to you problem with viewing thumbnails.
Can you give us the following information? Most of it can be found by right-clicking on the "Computer" icon and choosing Properties.
Vista version
Processor
Photoshop version number
Amount of RAM installed
Make and model number of video card
Maybe you are looking for
-
FCC in Receiver Communication Channel
Hi Frnds, i did FCC for below message , but its not working can any one help me onthis I want to implement File Content Conversion in receiver communication channel. DataString is 1:Unbounded <Records> <DataString>1234567892222222222222222222222</D
-
Does anyone know what this error is? Order type B Order number 0084046447 Method Message no. /SAPAPO/RRP501 I also see this: A table entry already exists with this secondary key Message no. /SAPAPO/OM_ERROR215 Diagnosis An application program called
-
I have a I DVD (I DVD 6) project that i have burned to 2 different DVD's ( One Printable & 1 Non Printable- Both Verbatim DVD-R) and i keep getting Artifacts in the 5 same spots. I have checked the Original Mini DV tape and the I Movie project and th
-
Whenever I enter text, then close the window, I get the message, "if you close the window, your changes will be lost. Do you want to close the window anyway?" Yes, I do want to close the window, and I want to get rid of this message from popping up.
-
Cannot Uninstall Adobe Air - tried everything - Pandora not working.
I cannot update AdobeAir and now pandora will not work. I have been trying to update for months. There is an unspecified error each time I try. So now I am trying to uninstall AIR, so I can attempt to reinstall. I get the same error when I try to un