Format of the mib data block ( MIB2-IP and MIB_TCP types)

Hi,
I am writing a c++ program to read IP and TCP mib data from the kernel.
Once I get MIB2-TCP and MIB2-IP data, I found that received data has
more than one structure worth of data. I am looking for a help to find
the exact format of the rcvd data. Also, is there a way to find the interface
owner of the MIB2-IP data.
Also it will be great, if someone can point to a document descring how mib
data interface is working.
Thanks in advance
k.Gnanaratne

Hi Obiee Gurus,
I have followed the above things but at the report level, facing below issue,could anybody let me know wht might be the reason,i have tried the dataype with varchar(4000) still facing the below issue
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred. [nQSError: 43113] Message returned from OBIS. [nQSError: 43119] Query Failed: [nQSError: 17001] Oracle Error code: 910, message: ORA-00910: specified length too long for its datatype at OCI call OCIStmtExecute. [nQSError: 17010] SQL statement preparation failed. (HY000).
Regards
kumar

Similar Messages

How to execute the second data block in master child form using lov

Hi All,
i am developed a new custom master child form using stacked canvas.Here i am taking two frames with diffrent data blocks.my point is i am enter the value from the lov in first frame automatically execute the second frame data block without button.
example:
fisrtdatablock:dept no(dept table).
second datablock:employee information(emp table).
select the dept value from lov automatically execute the second data block emp information.
can help me any one.
Regards,
sekhar.
Edited by: 994418 on 17 Mar, 2013 10:40 PM

994418 wrote:
Hi All,
i am developed a new custom master child form using stacked canvas.Here i am taking two frames with diffrent data blocks.my point is i am enter the value from the lov in first frame automatically execute the second frame data block without button.
example:
fisrtdatablock:dept no(dept table).
second datablock:employee information(emp table).
select the dept value from lov automatically execute the second data block emp information.
can help me any one.
Hi, sekhar.
Welcome to the Oracle Forums. Please take a few minutes to review the following:
<ul>
<li>Oracle Forums FAQ
<li>Before posting on this forum please read
<li>10 Commandments for the OTN Forums Member
<li>How to ask questions the smart way
</ul>
Following these simple guidelines will ensure you have a positive experience in any forum; not just this one!
>
Your forms mode isn't clear. Is it in enter-query mode or insert mode.
what can you do ?
use a timer in post-change or when-validate-item trigger at deptno item at first data block. because go_block isn't supported by p-c or w-v-t trigger.
and at when timer expire, write your code to go second block and insert/query the associate date from emp table.
Hope you understand.
Hamid
If someone's response is helpful or correct, please mark it accordingly.*

In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)

In Firefox 4 how can I cause the date on downloaded files to be the current date? (Some are and some are not. In FF3 the dates were ALWAYS the current ones.)
== This happened ==
Every time Firefox opened
== I upgraded to Firefox 4 (beta)

Firefox 3.6.* and earlier set the downloaded file's modification time to the current time. In Firefox 4.0 the behavior has been changed, if a server returns a timestamp telling when the file was last modified (Last-Modified header), it is used instead.
You can revert to the previous behaviour by using the [https://addons.mozilla.org/en-US/firefox/addon/93121/ Download Timestamp] add-on.

HT3702 My credit card was charged for two purchases in the amount of 14.95 each. I did not authorize these purchases. The purchase dates were 12/24 and 12/25.

My credit card was charged for two purchases in the amount of 14.95 each. I did not authorize these purchases. The purchase dates were 12/24 and 12/25.

Contact Apple at:
https://expresslane.apple.com/
Have you downloaded any apps on an iPad/iPhone for kids? If so you may have in-app purchases enabled for free games or similar, and they've racked up charges for you.

Is there any vi or possibility to find the hole dates in an directory and to list the data-pfads as a string?

is there any vi or possibility to find the hole dates in an directory and to list the data-pfads as a string?
like in windows a search-funtion?
I have found one VI, it list the data in the directory self (the pfad from the data as string) but not the data in an under-directory. it also has the funktion to list me the under-directory but it do not list the complite data in every directory
can somebody help me pleace
THX

Hallo Chef,
unter LV8.21 befindet sich die beschriebene Funktion in der File-Palette:
Dummerweise gibt es die Funktion in LV8 noch nicht... (Deshalb ist es immer eine gute Idee zu sagen, mit welcher LV-Verson man arbeitet!)
Du kannst aber unter vi.lib/utility/RecursiveDirList.llb nachschauen, wie es gemacht wird
Message Edited by GerdW on 08-17-2007 11:17 AM
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome
Attachments:
AdvFileFunc.png ‏10 KB

Secure the file/data transfer between XI and any third-party system

Hi All,,
I would like to use to "secure" SSH on OS Level the file/data transfer between XI and any third-party system Run OS Command before processing and OS command After processing. right now my XI server installed on iSeries OS.
with ISeries we can't call the Unix commands hope we need to go for AS400 (CL) Programming. If we created the AS400 programm how i can call that in XI.
If any one have idea pls let me know weather it will work or not.
Thanks in adavance.
Venkat

Hi,
Thanks for your reply.
I have red some blogs like /people/krishna.moorthyp/blog/2007/07/31/sftp-vs-ftps-in-sap-pi to call the Unix Shell script in XI.
But as i know in iSeries OS we can write the shell script we need to go for AS400 programe. If we go with AS400 how we need to call that programe and it will work or not i am not sure there i need some help please.
Thanks,
Venkat

Upon transferring to the cloud, all my previous mail says the same date, except for today and yesterday. The rest says it came in on the same date I had to replace the hard drive 3 years ago. Totally stumped. It didn't do this on my mac...

Upon transferring to the cloud, all my previous mail says it entered my box on the same date, except for today and yesterday. Everything else says it came in on the same date on which I had to replace the hard drive 3 years ago. Totally stumped. It didn't do this on my mac...only when I moved. I have bad feelings about being to fix this...Any suggestions?

Get the new keyboard at eBay and replace by yourself may be cheaper way, though you're required higher skill and well know about MacBook Air.
http://www.ebay.com/sch/i.html?_from=R40&_trksid=p2050601.m570.l1313.TR0.TRC0.H0 .Xmacbook+air+2011+keyboard&_nkw=macbook+air+2011+keyboard&_sacat=0
https://www.youtube.com/watch?v=gLbasVD69xo

Deleted and adjusted the Master data table, sid table and text table

Deleted and adjusted the master data table, sid table and text table of an zinfoobject after removing and adding attributes to that zinfoobject and was trying to activate it and system was giving me messages that cannot activate infoobject something like this.
So, i deleted and adjusted the master data table, sid table and text table. Since then getting messages right after executing the query because in that query that infoobject is getting used.
So the messages i am getting is:
SID 9 for characteristic Zinfoobject could not be converted CL_RSDM_READ_MASTER_DATA->_SIDVAL_DIRECT_READ2
System error in program SAPLRRK0 and form MEGA_SORT_M_02-02- (see long text)
Please help me in fixing this whole thing.
Thanks
SAPBW

SAP BW,
After adjusting your Master Data IOBJ and deleting and reloading the data - run a change run to adjust the references to the SIDs and then see if your query runs - run program RSDDS_AGGREGATES_MAINTAIN from se38 and select your IOBJ in the next screen..
Arun
Assign points if useful
P.S I did notice that in your earlier post for the same topic - you have had 12 answers / suggestions Please maintain only one thread as previously suggested..
My 0.02
Message was edited by:
Arun Varadarajan

Stock on posting date with storagelocation,batch and stock types informatio

Hi,
I'm needing a report (similar funtion of MB5B) which must reveal the stock postion (closing balance) of the materials on a particular date alongwith storage loactions, batches and stocktypes (Unres/Q/Blkd).As such MB5B either gives the output either by storage location or by batch, not the combination of both.
Else provide any possibilty means( Database tables) from where i could arrive these mention outputs.
I could be able to get the information by collecting the values from MKPF & MSEG tables. But this information only suffice the material movements carried on that particular date.. And i will be not having the closing balance as a whole.
I even wonder to get any such a kind of information in which i could able to get the stock with stock types(Unres/Q/Blkd).
Any light on this matter is highly appreciable.
Regards
Prasanna

Hi Amit Bakshi,
Thanks for the reply..
I executed the suggested program but i found the same kind of information aslike in MB5B..
The information all i'm looking is to get the closing balance of the given material with storagelocations, batches and stock types on a given posting date.
For eg.
On 15 / 03 / 2011
Material A
Batch       Slocation       Stock type               Closing balance Qty.
A1              S001               Unres.                             50
A1              S002               Unres                            120
B1              S001               Quality                             15
C1              S003               Blocked                            30
In MB5B i could able to get the values of closing balance either Storage location level or by batch level but is it possible to get the combination of both along with stock types?
Reg
Prasanna

Format of the demo data source(mvdemo)

what is the format of the datasource mvdemo that is available on oracle site?
what data formats oracle mapviewer suports?
where can i find datasets supported by oracle mapviewer?

when you upload OC4G and mapviewer, and other package that are in one zip file you will find an example who is mvdemo , in it you will find read-me file and you step by step this file ....

How to handle Multiple date formats for the same date field in SQL*Loader

Dear All,
I got a requirement where I need to get data from a text file and insert the same into oracle table.
I am using SQL*Loader to populate the data from the text file into my table.
The file has one field where I am expecting date date data in multiple formats, like dd/mon/yyyy, yyyy/dd/mon, yyyy/mon/dd, ,mm/dd/yyyy, mon/dd/yyyy.
While using SQL*Loader, I can see Loading is failing for records where we have formats like yyyy/dd/mon, yyyy/mon/dd, mon/dd/yyyy.
Is there any way in SQL*Loader where we can mention all these date formats so that this date data should go smoothly into the underlying date column in the table.
Appreciate your response on this.
Thanks,
Madhu K.

The point being made was, are you sure that you can uniquely identify a date format from the value you receieve? Are you sure that the data stored is only of a particular limited set of formats?
e.g. if you had a value of '07/08/03' how do you know what format that is?
It could be...
7th August 2003 (thus assuming it's DD/MM/RR format)
or
8th July 2003 (thus assuming it's MM/DD/RR format)
or
3rd August 2007 (thus assuming it's RR/MM/DD format)
or
8th March 2007 (thus assuming it's RR/DD/MM format)
or even more obscurely...
3rd July 2008 (MM/RR/DD)
or
7th March 2008 (DD/RR/MM)
Do you have any information to tell you what formats are valid that would allow you to be specific and know what date format is meant?
This is a classic example of why dates should be stored on the database using DATE datatype and not VARCHAR2. It can lead to corruption of data, especially if the date can be entered in any format a user wishes.

The sort key in the master data G/l account and master data customer

Sort Key
Hi All,
in the master data (control data) of the G/l account XXXXXX (it's a reconciliation account) I've filled in the sort key the value ZZ1 (XBLNR).
Instead, in the master data of a certain customer which has its Reconciliation Account equal to xxxxxx, I've filled in the sort key ZZ2 (BELNR).
Posting a document, I need that the Assignment number is equal to XBLNR.
How could I obtain this?
Thanks a lot
G.

Hi,
You are assign short key with Customer master in ZZ1 (Account Management Tab Bottam).
I think it is helpful to you.
Regards,
Spradip

When I try to play youtube video I get the message of blocked plug-in, and I can not play video using Safari. (Youtube works fine with google chrome) I tried installing flash player HTML5 etc... but still no difference.

I just installed OSX Mountian Lion, and ever since then I can not play youtube video's. I get the message of 'Blocked Plug-in' in the youtube screen. I have tried installing Adobe Flash Player. HTML 5, also tried enabling/disabling java, but nothing worked out. Is there any way I can play youtbe vieos on Safar. (It works fine with Google Chrmoe, only safari has problem)

If you have the ClickToFlash extension installed, that can prevent Flash based video from streaming. Safari > Preferences > Extensions
It can also be installed as a plugin in /Library/Internet-Plug-Ins.
Try uninstalling the currently installled Flash plugin (required for most YouTube content) then reinstall new > Troubleshoot Flash Player | Mac OS
From your Safari menu bar top of your screen click Safari > Preferences then select the Advanced tab.
Select: Show Develop menu in menu bar
Now from the menu bar click Develop > Empty Caches

Check the modification date of a file and compare it to the current date

Hey everyone,
I'm writing a script that compares the modification date of a file to the current date, and performs actions based on whether the file was modified 7 days ago or not. I haven't been able to figure out exactly how to do this.
I haven't been able to find much in the way of this online, and I am not that familiar with manipulating dates and whatnot. I was able to get a bit of it, posted below:
currentDate=`date +%b-%d`
fileDate=`ls -l ~/.backup.txt | awk '{ print $6, $7 }'`
echo "$fileDate"
echo "$currentDate"
if [ "$fileDate" <= "$currentDate" ]; then
echo "old enough to run script"
else
echo "not old enough yet"
fi
Of course, this doesn't work. Any help would be much appreciated. This is for Leopard.
TIA,
Andrew

find ~/.backup.txt -mtime +7 -exec yourscript {} ;
You may need to play with the +7 value to get the exact number of days old the file needs to be.
The find command will accept a directory (actually it is frequently used with directories) and will find all files in that directory and any subdirectories below that match the find selection critiera.
So you could do something like
find ~ -mtime +7 | xargs yourscript
or
find ~ -mtime +7 -name "*.txt" | xargs yourscript
and if your script does not accept multiple filenames on the command line, you can use
find ~ -mtime +7 | xargs -n 1 yourscript
and if your file names have spaces in them, you can use
find ~ -mtime +7 -print0 | xargs -0 -n 1 yourscript

HT1918 I am trying to change my card and after putting in the card number and the expiry dates it will not let me type in the security code please help

I am trying to change me paymenet method by changing my card, after typing in the card number and expiry dates it will not let me type in the box for the security number I am trying to do this on the computer
Jill

finally ...
1. Logout from all apple devices
2. open "App Store" application on your macbook. Login and change all the details for card.
3. Login in itunes, iphone ... I will see that all the details are already updated automatically.
I've just bought some app from itunes

Format of the mib data block ( MIB2-IP and MIB_TCP types)

Similar Messages

Maybe you are looking for