Format Problems on Triple Boot: OSX, NTFS Data, NTFS windows

I have a MacBook Pro 2.4GHz Intel with the 200Gb 7200RPM OEM drive.
I want to have three partitions on the drive, an OSX, and two NTFS drives one for windows system and one for data. I will be getting "NTFS for Mac" by paragon. I want the data drive to be NTFS so I can use Windows SyncToy to synchronize the data between my desktop PC and the Mac.
I used terminal to get the drive partitioned with the OSX and two MS-DOS Fat 32 drives. Windows installed and reformatted the last drive (in the drive list so bootcamp is happy) into NTFS which is 51GB. (I had to use a MS-DOS boot disk to set the last drive to active for windows to install.)
The Problem is Windows sees the 90GB data drive and can access it, but when I try to reformat it to NTFS it gets to 99 or 100% and then Errors with "Format failed"
I used Disk Utility in OSX (booted) to write Zeros to the data drive as some research said that might be the issue, but still the data drive will not take a reformat to NTFS. I also tried to use the WinXP install disk and its format utility but with a copy of windows on the machine there appears to be no option to format the data drive.
Any Ideas?

I found this article helpful, you have to modify the process somewhat but it did work: http://wiki.onmac.net/index.php/TripleBoot_viaBootCamp
One side effect is that a TimeCapsule will not back up a NTFS partition. I have reverted to two JHFS partitions one for 10.6, one for Data, and a NTFS for Widows.

Similar Messages

Tutorial - How to triple boot OSX, Linux and Windows 8.1 with a shared Data Partition without any third party Win / OSX softwares

This is not a question, but rather a personal guide that has proved to be running successfully.
I would like to thank numerous sources, including Christopher Murphy's suggestions at:
Re: Repairing Boot Camp after creating new partition
Before proceeding, there are certain concepts needs to know:
Why Boot Camp does NOT allow further partitioning of drives after Windows has installed?
Answer: Because the way Apple configures the Mac to be recognized as non UEFI capable system on Windows.
Quote from Christopher Murphy based on the above line:
However, Windows on Macs right now use CSM-BIOS mode in Mac firmware that presents BIOS to Windows rather than EFI. Windows thinks it's on a BIOS computer, and therefore mandates the use of MBR for boot disks, rather than GPT. So that's why we have this hybrid MBR+GPT approach on Mac with Windows on it. You inherit the limitations of MBR, which is four primary partitions.
So what does it means?
It means that OSX + EFI + Recovery HD + Boot Camp partition = 4 primary partitions and thus any attempt to modify the disk will render booting issues of either system.
For more info on GPT (GUID Partition Table disks VS Master Boot Record or MBR in short, you may visit: http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx)
So, how to overcome it?
The general guideline is to install ALL GPT ready OS first then create a Data partition, before installing Windows (Which is again, NOT supported GPT due to EFI configuration by Apple where end-users are not able to modify it).
Interestingly, since Mac Pro 2013 Late supports only Windows 8 and above, thus it is not known if this CSM-BIOS applies to it or not.
Do take note that GPT disks in Windows can only be booted when the system meets the 2 requirements:
http://msdn.microsoft.com/en-us/library/windows/hardware/dn640535%28v=vs.85%29.a spx#gpt_faq_win7_boot
1) Windows x64 version (Which is a must for newer Macs. If you cannot go to Boot Camp 5, then you need Windows 7 x86 or 32bit version)
2) UEFI system. However, Windows sees all Macs (With the possibility of Mac Pro 2013 Late is an exception. To be determined) as BIOS, or rather NON-UEFI system.
In short, booting on GPT disks is not possible for Mac in Windows.
Summary,
It is tested that a combination of the following will not work:
- OSX + Windows + Linux
- Windows + OSX + Linux
- Windows + Linux + OSX
Usually it can create the system un-bootable or OSX refused to install due to the system does not recognize such partitions and / or Disk Utility refused to format a free space. An example screen-shot is provided below:
The error message is shown as
Title: "Failed to erase volume" Message: "Failed to wipe volume, as an error occurred: MediaKit has reported that the device does not have enough free space to execute the requested operations."
The second thing is about the preparations we need.
1) 1X Windows 7 or 8 DVD or USB thumbdrive
1A) If you uses a DVD to install, you will need another thumbdrive to load the BootCamp drivers for Windows as well as may requires an external DVD drive for newer Macs
2) 1X Linux DVD of your choice. Personally I choose Fedora 20.
So ready? Let's go.
1. Using Disk Utility, shrink the OSX's partition size to what is needed. For me, I give OSX 150GB. Do NOT create any new partition.
Disk Utility should see something like below whereby only OSX partition is left with desired disk space. The remaining space are to be unused disk space for the moment.
Note: Click on the top most item that should start with the size of your HDD / SSD. Then clicked on "Partition" and specify the desired OSX size. Hit "Apply" after that.
2: Download Boot Camp drivers only via Boot Camp Assistant. The USB thumbdrive shall be used later after Linux's installation.
Boot Camp Assistant should see this:
I have only selected "Download latest Windows Support Files from Apple"
3. Insert Linux DVD, reboot Mac into EFI mode (The left most first "EFI mode").
Note 1: Before rebooting, please plugged in an Ethernet adapter because Wi-Fi drivers is not installed.
Note 2: For Thunderbolt adapters, it must be plugged in before reboot as hot-swapping is not supported under Linux. More on the tips at the end of this article.
Note 3: Press and hold "Option" after the screen turns black. Release Option key after you see the image as below:

For the unfortunate part that did not make it on time to edit the images:
9. Install the Windows Support software from your CD/USB drive to gain full functionality of your computer. Reboot and go to Windows again.
Note 1: You may choose to eject disc at this point of time. For Apple SuperDrive users, you will need to wait until the drivers (i.e. Boot Camp support files) is installed and rebooted before ejecting is reasonably possible (As I failed to figured out how to right click without the drivers)
Note 2: Unlike Windows 7 on KBase article TS4599 Keyboard/trackpad inoperative, black screen, or alert messages when installing Windows 7, USB stick can be plugged in after the Windows installation is done. This is because Windows 7 (And probably Windows 7 with SP1 DVD) does not have a built in USB 3 drivers when it was released back in 2009 where USB3 has not arrived then.
Note 3: Due to TPM, Bitlocker is not supported without the use of thumbdrives.
10. Using Disk Management to determine the given drive letter for the DATA partition (DO NOT DELETE and RECREATE partition or else you can goodbye to booting Linux and OSX). Disk Management will not allow you to format it as exFAT / FAT32 in graphical way.
Note: You may remove or modify some of the disk letters in Disk Management. However, do NOT remove / modfify the drive letter for the partition with 200MB size in HFS. This is because it will disallow booting of Linux and neither could Windows nor OSX can do anything EXCEPT to reinstall Linux only.
11. Open Command Prompt in Administrator Mode (Important!!), and key in the following command:
format F: /FS:exFAT
Give this volume a label after it has successfully formatted before hitting "Enter" again.
Note: Mine Data partition was assigned as F drive. Please make necessary adjustment to "F:" should your Data partition is assigned to other letters.
12. After that, Setup your Data partition structure as you like.
Tip: Minimally create the important folders such as:
- Music
- Documents
- Movie (Videos)
- Downloads
- Pictures
All these folders are commonly used by the 3 OSes. I do NOT recommend changing of /home (OSX and / or Linux) and / or user home directory (Windows) either partially or as a whole.
This is because of compatibility issue.
On a side note, iTunes Media Library used in OSX and Windows are NOT able to be use interchangably due to hard-coded path used.
13. Useful troubleshooting in Fedora / Linux:
With references to these:
http://chaidarun.com/fedora-mbp
http://anderson.the-silvas.com/2014/02/14/fedora-20-on-a-macbook-pro-13-late-201 3-retina-display/
http://unencumberedbyfacts.com/2013/08/16/linux-on-a-macbook-pro-101/
I would like to highlight a few important points:
1) Wi-Fi driver:
http://rpmfusion.org/Configuration
Note 1: The sound driver should be installed at Out of Box Experience. However, the Wi-Fi is not.
Note 2: Install both free and non-free repository. By the way, some other software like VLC can only be found after the Free Repository is installed.
Search for "akmod-wl" in Gnome-Package-Installer in order to install Wi-Fi drivers
Note 3: For those who do not have Ethernet adapters and their Mac does NOT have a built-in Ethernet port, it is recommended to get one. This is because Fedora 20 does not have a good support for iPhone USB tethering. Unsure for Andriod / Blackberry / Windows Phone users.
2) Grub Menu:
It will show several options to boot into OSX, even of the capability to boot into x86 or x64 mode. However, neither of them is bootable except Linux and the rescue.
Hence, it is recommended to remove the items by hand in this file:
/boot/efi/EFI/fedora/grub.cfg
Command to be used:
"sudo gedit /boot/efi/EFI/fedora/grub.cfg"
Parts to be removed:
- For any extra kernels, delete the target entry by locating the line "menuentry" under "/etc/grub.d/10_linux" sector to one line above the next "menuentry".
It is recommended to keep one main kernel, and one recovery at the minimal.
- For other OS, delete all the entry (Since neither it can works) under "/etc/grub.d/30_os-prober" sector without removing the lines starts with ###.
Auto Mount exFAT partition:
- After installing extra packages for exFAT support (Since it is not supported by Fedora 20 from a default installation), you may wish to edit "/etc/fstab" in order to mount the exFAT partition during boot time.
Command to be used:
"sudo gedit /etc/fstab"
Add the following line in gedit:
UUID=702D-912D /run/media/Samuel/DATA exfat defaults 1 2
Note 1: For DATA partition, OSX & Boot Camp partition, Fedora defaults mounts under: "/run/medua/<Username with case sensitive>/<Partition Label Name>"
Note 2: UUID is unique ID. You can find out the UUID by:
Step 1: First determine the DATA partition number:
"sudo gdisk /dev/sda"
Step 2: Determine the UUID of this partition number:
"sudo blkid /dev/sda8"
Reference 1: http://manpages.courier-mta.org/htmlman5/fstab.5.html
Reference 2: http://liquidat.wordpress.com/2007/10/15/short-tip-get-uuid-of-hard-disks/
3) Overheating CPU
Solution is to issue the following command in Linux terminal: su -c "echo -n 1 > /sys/devices/system/cpu/intel_pstate/no_turbo"
4) System resumes immediately after suspend
Solution is to issue the following command in Linux terminal: su -c "echo XHC1 > /proc/acpi/wakeup"
5) What does not works well out of box:
- Both GNOME and KDE's fonts are too small to be readable for out of box experience. Additional configuration is a need. (Some of the info can be found on "More Tips" later)
- Thunderbolt hotplugging is NOT supported under Windows and Linux so far. Neither FaceTime HD camera works as well.
- The red light in Headphone jack is always on. I do not have luck in switching off the light without losing the sound.
Note 1: It is determined that the module "snd_hda_intel" is used by both cards (HDMI and normal output)
Note 2: It is also known that blacklisting it can switch off the redlight at the price of muting the system.
Note: Based on this article, http://support.apple.com/kb/TS1574
A Mac (Except Mac Pro) needs servicing when there is a red light while the system fails to detect internal speakers. However, this article does NOT applies to this issue.
5A) More Tips:
Install gnome-tweak-tool for more customization
Search for: "gnome-package" to install:
Install Gnome Package Installer for advanced package repository
Install Gnome Package Updater for advanced updates to be install (Whereby Fedora's App Store alike might not show the relevant updates)
14. Verify if disk is still GPT:
Use Gdisk to determine if the disk is pure GPT:
http://ubuntuforums.org/showthread.php?t=1742682
Command: sudo gdisk -l /dev/sda (The entire hard drive)
You should see the MBR is "Protective" instead of anything else.
15. Congrats, the system is ready for triple boot. (I forgot to eject my Windows DVD when the photo was taken)
Note 1: You cannot set the default startup disk in Linux due to the lack of Boot Camp Control Panel in Linux.
Neither is changing startup disk recommended in Windows due to the inability to display correctly.
For me, I click "Cancel" whenever I am on this tab (Feel free to make other Boot Camp adjustments in other tabs).
Only OSX I know that can show the startup disk options correctly.
Note 2: For some reason, OSX likes to auto mount the EFI partition everytime it boots up. It is not known to have any issue for ejecting other disks or mounting disks via Disk Utility.
Note 3: It is not determined if any Firmware or System upgrades will cause issues. It is only known that all 3 OS's regular updates should not be an issue.
System Updates excludes Mac OSX 10.9.3 updates to OSX 10.9.4 type as I had done it on a OSX 10.9.4 Mac or Windows 8.1 to Windows 8.1 Update 1 since my Windows DVD comes with Update 1.
System Upgrades refers to OSX Mavericks to Yosemite, Fedora 20 to Fedora 21, Windows 8.1 Update 1 to Windows 8.2 / Windows 9 for that matter.
Note 4: Reset SMC and / or PRAM will NOT affect your ability to boot any of the OS (OSX, Recovery HD, Fedora & Windows 8)
Yup, that is it!

Powerpoint format problems between Vista and OSX using Parallels

I've intalled Parallels and it mostly works great. The exception is Powerpoint and trying to go back and forth between working on a doc in Windows and working on the same doc in the OSX version.
Formatting between the two versions is not compatable. For instance, one user changing the doc in Apple creates a formatting mess when the doc is then opened in Windows.
Are there any patches that solve this problem?

Since PowerPoint is not an Apple product, you'll get better response if you use a forum dedicated to Microsoft's Mac products such as <http://groups.google.com/groups/dir?sel=33607053> rather than an Apple forum.
Be sure to search the forum first in case someone has already had a similar question answered. You'll get your answer faster this way. Post your question in the forum if you don't find anything that helps you.

Can't seem to install GRUB (Triple boot OSX + WIN7 + Arch.)

Alright I've partitioned my drive into 3 using disk util sda1 default mac boot or whatever, sda2 main OSX, sda3 arch, sda4 win7.
I've installed win 7 already, and attempted to install arch... I think I've done it, but all the tutorials said to skip installing the boot loader and install it manually from the live cd.
So basically I booted the live cd again, and did this:
grub-install /dev/sda3
but I get this:
/dev/mapper/../dm-0 does not have any corresponding BIOS drive
However, my compter works , and rEFIt detects OSX and Win7...
I really want to be able to use Arch, I'd appreciate it greatly if anyone can help me to get grub to work/or ger Arch to somehow boot alongside the other 2 OSes.\
PS. My computer is a MacBook Pro 15" i7 from late 2011.
Thanks!!
EDIT: Could it be because sda3 is ext4?
Last edited by SkullTraill (2012-04-10 00:17:56)

Self Solved:
Do not reboot after install, install grub directly after exiting arch installation.

How can I triple boot with OSX, Windows XP, and Windows 7 RC?

Here's the short story:
I have OS X 10.5 and Windows XP on an internal drive.
My goal is to install the Windows 7 RC on a bootable external drive connected through eSATA
Currently:
I used Winclone to copy my XP partition (with a different-looking desktop) onto the external drive to test if I could boot from it. Seems the EFI boot sequence recognizes the external copy in any case. Picture here: [http://img171.imageshack.us/i/library5991.jpg> (ignore the backup hard drive)
When I select the Windows icon on the left, it boots the internal drive partition. However, when I select the icon on the right, it also boots the internal partition.
Is there any way I can manipulate the BIOS emulation to chose between the two drives? Would clearing the internal Windows partition let it default to the external one? Would just installing Windows 7 RC resolve the issue?

Hi KWarp,
here a guide on how-to triple boot OSX, XP and Vista http://guides.macrumors.com/Triple_Boot
Replacing Vista with Windows 7 should be no difference.
To my knowledge Windows can not be booted from an external harddisk and I don't think that Microsoft has changed that with Windows 7 (although I like to be wrong on that ).
Intel-Macs don't have a BIOS but use its successor EFI.
Tools for 'fumbling' with EFI are restricted to Apple Technicians.
Regards
Stefan

Triple boot with XP and 7

I know that this isn't technically Boot Camp, since I'll be using rEFIt for my boot loader, but I'm hoping somebody in here can help me.
I carved out 3 partitions using diskutil and formatted 2 of them FAT so I could load windows on them. I got rEFIt installed and it is working fine. I installed XP on the last partition (because I read that Windows needed to be on the last one and was hoping 7 was smarter) and verified that it was bootable. REFIt was working fine on it. I installed 7 on the middle partition, but when I choose to boot to that partition from rEFIt it says it can't find NTLDR. The interesting part is that if I pick the last partition for XP, the boot NTLDR shows up and I can select with Windows 7 or the previous version of windows.
What I want to do is get the boot loader for 7 fixed to point to the right partition for NTLDR so that I can use rEFIt to choose my OS. I know that I could just boot to the XP loader and then choose 7, but it isn't a pretty.
Thanks for any input or advice.

Hi KWarp,
here a guide on how-to triple boot OSX, XP and Vista http://guides.macrumors.com/Triple_Boot
Replacing Vista with Windows 7 should be no difference.
To my knowledge Windows can not be booted from an external harddisk and I don't think that Microsoft has changed that with Windows 7 (although I like to be wrong on that ).
Intel-Macs don't have a BIOS but use its successor EFI.
Tools for 'fumbling' with EFI are restricted to Apple Technicians.
Regards
Stefan

Mac Pro - Using 3 drives for a triple-boot system

Hello
I am purchasing an 8-core Mac Pro today, and I want to start the ball rolling early on this endeavor, as it will probably take some discussion and research on my part.
I want to take my Mac Pro and install 2 more hard drives (for a total of 3) so that I can have a triple-boot system using OS X, Windows XP Pro, and Ubuntu Linux.
All of the tutorials I am coming across discuss installing on partitions. I'd like to install onto separate hard drives. What do I have to know in order to make this work?
- Should I use a 64-bit XP OS? Why or why not? (I'll have 4 GB of RAM)
- Any major issues with drivers in XP or Linux?
- Can I make a fourth hard drive mountable across all 3 other OS installations?
- Can I mount the other OS drives in my booted os? (For instance, if I boot into Linux, can I mount the XP drive and the OS X drive, or mount the Linux Drive and XP drive in OS X?)
Thanks for your input.
----------S

I'd like to install onto separate hard drives. What do I have to know in order to make this work?
The Boot Camp Assistant will allow you to prepare an entire drive for Windows so that's simple enough. If you want to do this yourself all you need to do is to change the partition map scheme for the desired drive to Master Boot Record and then let the Windows installer do the rest. Be aware that manually doing this will mean that Parallels will not find this drive as a Boot Camp drive if that's important to you.
Sorry, don't know anything about Linux.
Should I use a 64-bit XP OS? Why or why not? (I'll have 4 GB of RAM)
You can. Although there is currently no Apple driver support for x64 versions so you'll be on your won to source drivers. Personally I'd stick to the 32-bit version for now until Apple pulls its finger out and get 64-bit driver support.
Can I make a fourth hard drive mountable across all 3 other OS installations?
The simplest solution would be the use of FAT32 however Microsoft limits this to 32GB which is a right pain. You could always install a product like MacDrive into Windows to allow you access to your Mac partitions.
Can I mount the other OS drives in my booted os?
It depends on what you're looking for. NTFS partitions are mountable under Mac OS X but are read-only. Mac partitions are avaialable under Windows but requires a product like MacDrive.

Triple Boot - Leopard, Snow Leopard & Win 7

Hello;
I have a Macbook Pro5,5 (unibody aluminum late 2009). I used disk utility as a simple process of partitioning so I could dual boot Leopard and Snow Leopard.
Is it possible to triple boot Leopard, Snow Leopard and Windows 7 x64?
I want to use it for specific testing at work and do "not" want to use a vmware solution.
Thanks

Hello
I just came across this
https://discussions.apple.com/message/16073483#16073483
snow leopard, lion and windows 7 discussion
I reckon the principle is the same
Stevie

XML Publisher to Excel Report : Date format problem

Hi,
I am trying to create an Excel report with XML Publisher. I have an issue with the Date Fomatting.
In the XML template, I have set the "Date" column in date format. But the excel output report "Date" column returns as "General text" (string) and it is sorted as text, not as date.
Can anyone please help me out?
Thanks!!!

Hi,
Did this post solve your problem? I have the same issue that I need to solve.
I have an xsl-fo template with dates in it.
The dates are in english.
My excel is setup to use danish.
When I export to excel it knows the month jan, feb, mar, apr, ... which are the same in danish and english.
But months where it differs like may (danish maj) the cell is a general text instead of date.
Is there anyway you can set/transform the date in the xsl-fo template so it does not care about the language in excel?
Thank you in advance.
BR Kenneth

Quicken 2007 date format problem in Mavericks

Objective: Get date format in dd/mm/yyyy format in Quicken 2007 (Lion compatible version).
Current OS: Mavericks 10.9.4
Hardware: Retina MacBook Pro & iMac 27" 3.2Ghz
Problem:
On my rMBP with Mavericks 10.9.4, I’m able to get Quicken 2007 data in dd/mm/yyyy format, as desired.
On my new iMac (late 2013) with 10.9.4, Quicken recognises the System date formats dd/mm/yyyy (setting up a new register shows System date format) but the registers and data are all in m/d/yy.
Quicken prefs are set to Canadian, so date formats should automatically be in dd/mm/yyyy, but aren't.
The Quicken data file is identical on both Macs. The original file goes back to 1991, and has been through all Mac OS iterations since then.
Pre-Lion, I remember that the workaround was to set the Language & Region to something (English / US, don’t remember which) and then change date formats. Anyway, the dd/mm/yyyy stuck, through Lion and Mavericks on my rMBP, but is causing a problem in the iMac.
My guess is that Quicken is unable to / blocked out from accessing System date formats in Mavericks 10.9.4.
Wondering if there’s some way to make Quicken access the Mavericks System date format, and stick to it?
Possible approach: If some expert in these forums knows how Mavericks works under the hood, how it allows other apps access to System Prefs like date formats etc., perhaps a script or Terminal command could force Quicken 2007 to recognise and accept date formats from System Prefs (Language & Regional settings).
I'd really appreciate the help; needless to say, the Quicken data is vital to my work.

Hi Marlon,
The OS Local definitions. Different countries have different date formats for their location. Check the date format of the OS CultureInfo settings.
Regards,
Vítor Vieira

Date format Problem in forms&reports Services 10g

Hi Dears,
I Faced a problem during running reports ( i am using forms& Reports Services 10g), when i pass the parameters via parameter form to the report (built in forms10g Rel 2.0) its appearing in arabic like (25-يناير-2010) as my Date Formate is (DD-YYYY-MON) and NLS_LANG parameter is defined as Arabic_Saudi arabia.AR8MSWIN1256 so as a result report is not running due to unknown Date formate, how can i change the Same Date format (DD-YYYY-MON) to appear in english like (25-2010-JAN)
Thanks

You could specify the parameter as type VARCHAR2, explicitly cast it (maybe to DD.MM.YYYY) when you pass it from forms and cast it back in your query, like TO_DATE(:P_PARAM, 'DD.MM.YYYY')

Date Format problem...

Hi users,
Forte version : 2.e.2 and ForteWebSDK
Datacase : Oracle
We have a problem with a simple HTML text field which acccepts
a date. When we try to update the record with some date, the following
exception occurs:
24-Jun-1998 04:32:28 : XV01086 : Execute failed for SQL statement in
project Rap
tServices, class RaptSqlMethods, method updateActivity, methodId 104,
line 51, e
rror from database is:
ORA-01830: date format picture ends before converting entire input
string
The Oracle manual says that the above exception occurs when there are
some extra characters on that field, which is not the case. In fact,
we raise our own exception for the cases like : o1-Apr-1997,
01-apr-97 etc. The correct format is 01-apr-1998.
Same date soemtimes is added to the database successfully. Waht I mean
to say that the exception deos not occur consistently.
We just conevert the String taken from the HTML field into a Forte
DateTimeData Object and send it to database. May be, the conversion
part is causing the problem. But, once again the problem is not
consistent.
Any ideas in this will be appreciated.
Thanx in advance
-Rajeev Talwar
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

We had the same problem when our application first went live. The
default date format for our Oracle database is 'dd-mmm-yy' without the
time component. The default format for datatype DateTimeData is
'dd-mmm-yyyy hh:mm:ss'. Since we did not want to change the default date
format for the Database, we included in our service partitions an Alter
Session statement to change the NLS_Date_format attribute in Oracle to
conform to the Forte DateTimeData format. It worked.
Kam Chow
Mazda Australia
-----Original Message-----
From: Gary F Giger [mailto:[email protected]]
Sent: Thursday, June 25, 1998 4:11 AM
To: Rajeev Talwar
Cc: [email protected]
Subject: Re: Date Format problem...
I was having the same problem a few weeks back when I would
read/write
dates to Oracle. I was using objects of type DateTimeData and I would
occasionally get errors like you said you were. I found discovered my
problem. Sometimes I would process a null date and would get an error.
So to
resolve this issue, I simply changes my objects of type DateTimeData to
type
DateTimeNullable. This enabled my Forte Application to handle regular
dates
as well as null dates. I have not gotten any oracle errors since then
with
regards to dates. Hope this helps.
Rajeev Talwar wrote:
Hi users,
Forte version : 2.e.2 and ForteWebSDK
Datacase : Oracle
We have a problem with a simple HTML text field which acccepts
a date. When we try to update the record with some date, the following
exception occurs:
24-Jun-1998 04:32:28 : XV01086 : Execute failed for SQL statement in
project Rap
tServices, class RaptSqlMethods, method updateActivity, methodId 104,
line 51, e
rror from database is:
ORA-01830: date format picture ends before converting entire input
string
The Oracle manual says that the above exception occurs when there are
some extra characters on that field, which is not the case. In fact,
we raise our own exception for the cases like : o1-Apr-1997,
01-apr-97 etc. The correct format is 01-apr-1998.
Same date soemtimes is added to the database successfully. Waht I mean
to say that the exception deos not occur consistently.
We just conevert the String taken from the HTML field into a Forte
DateTimeData Object and send it to database. May be, the conversion
part is causing the problem. But, once again the problem is not
consistent.
Any ideas in this will be appreciated.
Thanx in advance
-Rajeev Talwar
Get Your Private, Free Email at http://www.hotmail.com
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive<URL:http://pinehurst.sageit.com/listarchive/>
Gary Giger
Raytheon Systems Company
300 Science Park Road
State College, PA. 16804
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>
This message has successfully passed virus checking.
Mazda Australia takes every precaution to ensure email messages are virus free. For complete protection, you should virus test this message.
To unsubscribe, email '[email protected]' with
'unsubscribe forte-users' as the body of the message.
Searchable thread archive <URL:http://pinehurst.sageit.com/listarchive/>

Date Format Problem in Custom Report

Dear all ,
I am generating SQL statement for the report , i am passing (param_date from ) and (param_date to) to get data from SITs , and there is tow segments in the SITs : (SIT_date from ) and (SIT_date to) also ,, getting the data from the SITs by comparing the dates for the SIT and the parameters ,,, i am facing problem in the date format , ,, could any one please help me what is the format that i can compare the between dates in the SIT and the Parameters ???
Best Regards
Edited by: user6781803 on Jan 3, 2010 7:28 AM

>
... i am facing problem in the date format ...
>
What is the problem ? Pl also post full versions of your OS and EBS.
HTH
Srini

Date Format problem in a JTable, help plzzz !!!

Hi,
i have a JTable which contains multiple date columns, and more particulary, Timestamp columns.
I mean this format : yyyy-mm-dd hh:mm:ss.fffffffff
I only need hh:mm:ss informations for my JTable.
The problem is when i retrieve the datas in the JTable (which has a bean Select for model), the date column has this format : yyyy-mm-dd (only the date), and the time is not present !
What must i do to have only a part of the timestamp data in the column ??
Thanks in advance
Steve

If you want to format data in any way other than the default in a JTable, you need a table cell renderer. Sun's tutorial on how to use JTables explains them.

Date Format problem in a Spanish OS?

Hi Experts,
I have been stucked with this weird problem I am experiencing right now. I am able to process the date formats using SBO 2007A PL 37 and an English OS (XP, Vista) with no problem. But when we test the same application on a Spanish version of XP, I am getting an invalid date format.
Btw, in an English OS I can process all sbo date formats (mm/dd/ccyy, mm/dd/yy, dd/mm/yy, dd/mm/ccyy, ccyy/mm/dd, dd/month/yyyy). Is there anything else that I need to check somewhere?
Thanks,
Marlon

Hi Marlon,
The OS Local definitions. Different countries have different date formats for their location. Check the date format of the OS CultureInfo settings.
Regards,
Vítor Vieira

Format Problems on Triple Boot: OSX, NTFS Data, NTFS windows

Similar Messages

Maybe you are looking for