Formating between 10.1.3.3.2 and 5.6.2

Is it possible to import documents between 10.1.3.3.2 and 5.6.2 and retain formatting?
HTML documents are wider in 10.1.3.3.2 than they are in 5.6.2, so documents designed in 5.6.2 are too wide for 10.1.3.3.2
Any advise on this would be much appreciated

You will have to check the patch log to see if there were any structural changes done to the repository for that part.
If there are no structural changes, then i dont see a reason why that cant be done.
Work Repository names dont need to be the same. However, you must know how the Master and Work are linked together before attempting to do that.
Beware of the ID issue of the repositories. What are the ID s in the Dev environment and Test environment ?
Ideally they should be different.

Similar Messages

Difference between the design of clusters PCLx and others like RFBLG etc .

There are a few nagging questions which I was not able to find in the forum hence i have to post a new question.
I am a little confused about the difference between the different clusters .
If i start with RFBLG i.e. the cluster for BSEG BSEC etc ,I can see that the tables which are part of this cluster
can be viewed through different methods like
1) whr usd list for RFBLG
2) dd02l table and give the required parameters there
now when I compare this with another so-called cluster PCL1 if find that PCL1 is not recognized as a cluster
and also I am not able to see the same in dd02l table when i give PCL1 and the tabtype as cluster which I was able to see
for the RFBLG ,there are other tables similar to RFBLG .
1) SO what is the difference between the RFBLG type of clusters and the PCLx type of cluster
2) are pclx and rfblg..type of clusters same ?
3) why does PCL1 shows that it is a transparent table ? where as rfblg shows in a diff way in se11
4) i know we access data from PCL1 using import and export stmts ,DO OR CAN WE DO THE SAME FOR RFBLG
5) I found that each and evry cluster table had diff fields ,this was kinda surprising for me as I had been thinking
that all cluster tables need to follow a certain rule ,SO WHO DECIDES THE FIELDS OF A TABLE CLUSTER ?
6) PCL1 has the index button enabled ,which again I think is not according to the cluster table rules?how?
7) I understand that we can save data in form of internal tables in the PCL1 cluster ,can we do the same in RFBLG ?
8) Can I think on lines that PCL1 and RFBLG type of cluster are two totally different types of data dictionary objects
and the usage and implementation of both of them is different and that the design and the BASE of both of such objects
is different .
I know this is a long list but I am sure that answers to these questions would really require some one who has really really work hard and invested a lot of time in understanding the dictionary system.I am awaiting a few answers ,few hints and a healthy discussion till we get them .
Thanks ...
a

Hello,
1/
BSEG is a typical Cluster Table.
This means that the physical table BSEG does NOT exist in the database, physical data for BSEG is stored in the database (table) cluster RFBLG.
In ABAP however you can perform selects on BSEG (with all fields from the SAP repository structure, see SE11 on BSEG), during execution the SAP database layer will translate these statements to physical selects in the RFBLG database table, so in ABAP this is transparant.
More info :
[http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/cf/21f083446011d189700000e8322d00/content.htm]
2/
PCL1, PCL2, ... are normal SAP transparent tables, however in HR they are often called HR cluster table.
Transparent tables are SAP objects where there is also a database table with the same name that contains the physical data.
However the PCL tables are somewhat different from normal transparent tables (data is compressed, external programs can not interpret the data, ...).
This means that in ABAP you can not use simple SQL statements to access data in PCL tables (because of compressed format).
In stead statements like EXPORT TO DATABASE and IMPORT FROM DATABASE need to be used.
More info :
[http://fuller.mit.edu/hr/cluster_tables.html|http://fuller.mit.edu/hr/cluster_tables.html]
Wim

Synching on Windows 7 (64 bit) between Palm desktop (6.2.2) and Outlook 2010

I have recently purchased a new laptop with Windows 7 (64 bit) and Outlook 2010 which I use for email, contacts and calander. I have managed by a miracle using bluetooth to synch between my Tungsten E2 and Palm desktop and know that there are no tools, as yet, to synch between my E2 and Outlook 2010. Would it work as a two stage process i.e.
1. synch desktop and outlook
2. synch desktop and E2.
If so how do I do step one?
Thanks
Pepper
Post relates to: Tungsten E2

In PD 6.2.2 there is a PIM conduit switcher. Have you tried this?
Another option I can think to try is to export your data in a format compatible with Outlook, .csv or .tab and then import into Outlook.
Chapura makes a program called pocket copy. It is a one time transfer of your data from PD to Outlook.
They have a program called Pocket Mirror but is only compatible with 32 bit versions.
Here is a link to their site.
http://www.chapura.com/products.php

Initial load failing between identical tables. DEFGEN skewed and fixable?

Initial load failing between identical tables. DEFGEN skewed and fixable?
Error seen:
2013-01-28 15:23:46 WARNING OGG-00869 [SQL error 0 (0x0)][HP][ODBC/MX Driver] DATETIME FIELD OVERFLOW. Incorrect Format or Data. Row: 1 Column: 11.
Then compared the discard record against a select * on the key column.
Mapping problem with insert record (target format)...
**** Comparing Discard contents to Select * display
ABCHID = 3431100001357760616974974003012 = 3431100001357760616974974003012
*!!! ABCHSTEPCD = 909129785 <> 9 ???*
ABCHCREATEDDATE = 2013-01-09 13:43:36 = 2013-01-09 13:43:36
ABCHMODIFIEDDATE = 2013-01-09 13:43:36 =2013-01-09 13:43:36
ABCHNRTPUSHED = 0 = 0
ABCHPRISMRESULTISEVALUATED = 0 = 0
SABCHPSEUDOTERM = 005340 = 005340
ABCHTERMID = TERM05 = TERM05
ABCHTXNSEQNUM = 300911112224 = 300911112224
ABCHTIMERQSTRECVFROMACQR = 1357799914310 = 1357799914310
*!!! ABCTHDATE = 1357-61-24 00:43:34 <> 2013-01-09 13:43:34*
ABCHABCDATETIME = 2013-01-09 13:43:34.310000 = 2013-01-09 13:43:34.310000
ABCHACCOUNTABCBER =123ABC = 123ABC
ABCHMESSAGETYPECODE = 1210 = 1210
ABCHPROCCDETRANTYPE = 00 = 00
ABCHPROCCDEFROMACCT = 00 = 00
ABCHPROCCDETOACCT = 00 = 00
ABCHRESPONSECODE = 00 = 00
…. <snipped>
Defgen comes out same when run against either table.
Also have copied over and tried both outputs from DEFGEN.
+- Defgen version 2.0, Encoding ISO-8859-1
* Definitions created/modified 2013-01-28 15:00
* Field descriptions for each column entry:
* 1 Name
* 2 Data Type
* 3 External Length
* 4 Fetch Offset
* 5 Scale
* 6 Level
* 7 Null
* 8 Bump if Odd
* 9 Internal Length
* 10 Binary Length
* 11 Table Length
* 12 Most Significant DT
* 13 Least Significant DT
* 14 High Precision
* 15 Low Precision
* 16 Elementary Item
* 17 Occurs
* 18 Key Column
* 19 Sub Data Type
Database type: SQLMX
Character set ID: ISO-8859-1
National character set ID: UTF-16
Locale: en_EN_US
Case sensitivity: 14 14 14 14 14 14 14 14 14 14 14 14 11 14 14 14
Definition for table RT.ABC
Record length: 1311
Syskey: 0
Columns: 106
ABCHID 64 34 0 0 0 0 0 34 34 34 0 0 32 32 1 0 1 3
ABCHSTEPCD 132 4 39 0 0 0 0 4 4 4 0 0 0 0 1 0 0 0
ABCHCREATEDDATE 192 19 46 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHMODIFIEDDATE 192 19 68 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHNRTPUSHED 130 2 90 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPRISMRESULTISEVALUATED 130 2 95 0 0 0 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPSEUDOTERM 0 8 100 0 0 0 0 8 8 8 0 0 0 0 1 0 0 0
ABCTERMID 0 16 111 0 0 0 0 16 16 16 0 0 0 0 1 0 0 0
ABCHTXNSEQNUM 0 12 130 0 0 0 0 12 12 12 0 0 0 0 1 0 0 0
ABCHTIMERQSTRECVFROMACQR 64 24 145 0 0 0 0 24 24 24 0 0 22 22 1 0 0 3
ABCTHDATE 192 19 174 0 0 0 0 19 19 19 0 5 0 0 1 0 0 0
ABCHABCDATETIME 192 26 196 0 0 1 0 26 26 26 0 6 0 0 1 0 0 0
ABCHACCOUNTABCER 0 19 225 0 0 1 0 19 19 19 0 0 0 0 1 0 0 0
ABCHMESSAGETYPECODE 0 4 247 0 0 1 0 4 4 4 0 0 0 0 1 0 0 0
ABCHPROCCDETRANTYPE 0 2 254 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDEFROMACCT 0 2 259 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHPROCCDETOACCT 0 2 264 0 0 1 0 2 2 2 0 0 0 0 1 0 0 0
ABCHRESPONSECODE 0 5 269 0 0 1 0 5 5 5 0 0 0 0 1 0 0 0
… <snipped>
The physical table shows a PACKED REC 1078
And table invoke is:
-- Definition of table ABC3.RT.ABC
-- Definition current Mon Jan 28 18:20:02 2013
ABCHID NUMERIC(32, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHSTEPCD INT NO DEFAULT HEADING '' NOT NULL NOT
DROPPABLE
, ABCHCREATEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHMODIFIEDDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHNRTPUSHED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPRISMRESULTISEVALUATED SMALLINT DEFAULT 0 HEADING '' NOT NULL NOT
DROPPABLE
, ABCHPSEUDOTERM CHAR(8) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTERMID CHAR(16) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTXNSEQNUM CHAR(12) CHARACTER SET ISO88591 COLLATE
DEFAULT NO DEFAULT HEADING '' NOT NULL NOT DROPPABLE
, ABCHTIMERQSTRECVFROMACQR NUMERIC(22, 0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCTHDATE TIMESTAMP(0) NO DEFAULT HEADING '' NOT
NULL NOT DROPPABLE
, ABCHABCDATETIME TIMESTAMP(6) DEFAULT NULL HEADING ''
, ABCHACCOUNTNABCBER CHAR(19) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHMESSAGETYPECODE CHAR(4) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETRANTYPE CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDEFROMACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHPROCCDETOACCT CHAR(2) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
, ABCHRESPONSECODE CHAR(5) CHARACTER SET ISO88591 COLLATE
DEFAULT DEFAULT NULL HEADING ''
…. Snipped
I suspect that the fields having subtype 3 just before the garbled columns is a clue, but not sure what to replace with or adjust.
Any and all help mighty appreciated.

Worthwhile suggestion, just having difficulty applying.
I will tinker with it more. But still open to more suggestions.
=-=-=-=-
Oracle GoldenGate Delivery for SQL/MX
Version 11.2.1.0.1 14305084
NonStop H06 on Jul 11 2012 14:11:30
Copyright (C) 1995, 2012, Oracle and/or its affiliates. All rights reserved.
Starting at 2013-01-31 15:19:35
Operating System Version:
NONSTOP_KERNEL
Version 12, Release J06
Node: abc3
Machine: NSE-AB
Process id: 67895711
Description:
** Running with the following parameters **
2013-01-31 15:19:40 INFO OGG-03035 Operating system character set identified as ISO-8859-1. Locale: en_US_POSIX, LC_ALL:.
Comment
Comment
REPLICAT lodrepx
ASSUMETARGETDEFS
Source Context :
SourceModule : [er.init]
SourceID : [home/ecloud/sqlmx_mlr14305084/src/app/er/init.cpp]
SourceFunction : [get_infile_params]
SourceLine : [2418]
2013-01-31 15:19:40 ERROR OGG-00184 ASSUMETARGETDEFS is not supported for SQL/MX ODBC replicat.
2013-01-31 15:19:45 ERROR OGG-01668 PROCESS ABENDING.

Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

best way to format my 16GB flash drive for Mac and PC transferring large power point files?

format flash drive in Exfat for transferring files between Mac and Pc.
FORMAT TYPES
FAT32 (File Allocation Table)
Read/Write FAT32 from both native Windows and native Mac OS X.
Maximum file size: 4GB.
Maximum volume size: 2TB
You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
NTFS (Windows NT File System)
Read/Write NTFS from native Windows.
Read only NTFS from native Mac OS X
To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
AirPort Extreme (802.11n) and Time Capsule do not support NTFS
Maximum file size: 16 TB
Maximum volume size: 256TB
You can use this format if you routinely share a drive with multiple Windows systems.
HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
Read/Write HFS+ from native Mac OS X
Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
To Read HFS+ (but not Write) from Windows, Install HFSExplorer
Maximum file size: 8EiB
Maximum volume size: 8EiB
You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
EXFAT (FAT64)
Supported in Mac OS X only in 10.6.5 or later.
Not all Windows versions support exFAT.
exFAT (Extended File Allocation Table)
AirPort Extreme (802.11n) and Time Capsule do not support exFAT
Maximum file size: 16 EiB
Maximum volume size: 64 ZiB
You can use this format if it is supported by all computers with which you intend to share the drive. See "disadvantages" for details.

Thank you for approving my feed iTunes . The only problem is, there is no art work, even though artwork was submitted correct sizes and formats were used. Why is this and how can the problem be rectified?

Thank you for approving my feed iTunes . The only problem is, there is no art work, even though artwork was submitted correct sizes and formats were used. Why is this and how can the problem be rectified?

Thanks for getting back. Hadn't got round to re uploading the amended feed. I just did it now.
The only thing is, Feed Validator doesn't like it because of the picture size, and a couple of other things, it reeds the following:
Sorry
This feed does not validate.
line 22, column 14: width must be between 1 and 144: 1400 [help] <width>1400</width>
              ^
line 23, column 15: height must be between 1 and 400: 1400 [help] <height>1400</height>
               ^
line 25, column 21: XML parsing error: <unknown>:25:21: not well-formed (invalid token) [help]
<itunes:image href=http://www.whiteberg.com/Wdotfontitunes2.png" />
                     ^
In addition, interoperability with the widest range of feed readers could be improved by implementing the following recommendations.
Your feed appears to be encoded as "utf-8", but your server is reporting "US-ASCII" [help]
line 4, column 114: Self reference doesn't match document location [help]... dcast.xml" type="application/rss+xml" />
                                             ^

What Is The Difference Between Save As Self-Contained Movie and Exporting

What Is The Difference Between Save As Self-Contained Movie and Exporting a Video as a Quicktime File

Save As places the file inside a .mov container. No re-encoding.
Your still have the option to save this file as "self-contained" (all the parts travel with the file) or "reference" (small file sized movie that merely "points" to the movie parts).
A reference movie can't play if the source files can't be found. If they are moved or deleted the reference movie will fail and it can't be re-created.
Exporting is done to convert one QuickTime format to another. Typically you do this with a high quality source file. Exporting previously compressed files is a bad idea that leads to unpredictable results.
QuickTime doesn't open WMP formats without third party software help (Flip4Mac is one). You can't convert (export) WMP formats without paying extra fees to upgrade their software.

DIfference between Reusable FM for ALV display and ALV display using class

Hi,
Is there any difference between alv display using Resuable FM and ALV display using classes except the later one uses OO concept.??
One mere thing i want to clarify is that is there any difference exist between REUSE_ALV_GRID_DISPLAY and REUSE_ALV_LIST_DISPLAY? If so, then let me know.
It could be easier to understand me if yuo give scenario where these FM comes into picture
Regards,
Parag

Hi,
(1) REUSE_ALV_LIST_DISPLAY
Display an ALV list as per parameters defined in the function call
(2) REUSE_ALV_GRID_DISPLAY
Display an ALV grid as per parameters defined in the function call
(3) REUSE_ALV_COMMENTARY_WRITE
List header information is output according to its type. The output information is put in an internal table. Output attributes are assigned to each line via the TYP field.This module outputs formatted simple header information at TOP-OF-PAGE.
(4) REUSE_ALV_HIERSEQ_LIST_DISPLAY
This module outputs two internal tables as a formated hierarchical-sequential list.
(5) REUSE_ALV_VARIANT_F4
Display variant selection dialog box.
(6) REUSE_ALV_VARIANT_EXISTENCE
Checks whether a display variant exists.
Other Useful Link :
Customize ALV grid layout at run time
Download ALV grid Control Tutorial
Understand ALV report ( Just Copy and paste )
Dynamic selection on ALV at run time
Dynamic selection on ALV at run time
Regards
Kiran

Copy text format between text boxes

Is it possible to copy text formatting between boxes? I need to reformat a bunch of boxes and would like to be able to do this quickly. Thanks.

Hi,
In LiveCycle Designer ES3 you can use styles. Adobe LiveCycle ES3 * Styles
Regards
Bruce

I have an external drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. Which format do you think I should use? Will either one cause damage to the files on the hard drive?

I have an external hard drive - WD My Passport FOR MAC. I want to format it to work on both mac and windows. I also want to be able to connect it to my TV and watch movies.
I read up and I think I am supposed to use exFAT or FAT32? I also saw MS-DOS. Which format should I should use? Will any of them cause damage to the files on the hard drive?
My little memory stick uses MS-DOS and it works on both mac and windows.
Please can you just tell me a little about each and suggest which one to use.
I know how to change it once you tell me so don't waste your time writing about changing it.

Will any of them cause damage to the files on the hard drive?
WARNING: FORMATTING A DRIVE ERASES IT COMPLETELY !!
If you need to carry large files (e.g., larger than about 4GB) back and forth, you may need ExFAT. Otherwise MS-DOS works for smaller files.
The Mac can Read, but not write Windows New Technology File System (NTFS) without an add-on program such as Paragon NTFS.

Difference between using app server connection pooling and using the driver

Hi all,
How to get connection pooling with out application server and tomcat also?
What is the difference between using app server connection pooling and using the driver supported connection pooling?
Regards,
Murali

maybe the performance of App server pool is better than the JDBC pool,
for you don't know wether the implementation of the JDBC interface is good or bad.

What the difference between u0093Valuate GL Account Open Itemsu0094 and u0093Valuate G/

hi gurus
What the difference between Valuate GL Account Open Items and Valuate G/L Account Balances?
We found out that when we perform valuate GL account Open items there will be reversal done at the same time whereas when we perform Valuate G/L Account Balances there is NO reversal posting even though we hv entered the reversal posting date and Period.
Pls advise which one we should perform?

Valuate GL Account Open Items are for open item managed accounts including vendor/customer accounts. The valuation is performed for each (open) line items on key date specified.
"Valuate GL Balance" is for account NOT managed on Open Item basis but managed in foreign currency. The period balance of key date in foreign currency is valuated. Reversal document can be created by selecting 'Reverse postings' in "Postings" tab.
Kyoko

What is the relation between delivery num , sales order num and invoice

what is the relation between delivery num , sales order num and invoice

Look at VBFA Table
goto VBFA table ,enter order number number vbelv ,vbtyp_n is C,then VBELN is the delivery
if you enter delivery number in vbelv ,vbtyp_n is J,then vbeln is Invoice.
here VBTYP_N is the import.
VBFA is the sales document flow table,and very important table
Thanks
seshu

I enabled computer home sharing between my fiance's apple computer and my windows. I am able to play his music on my computer now, however I am making playlists for our wedding, and am unable to transfer any of his songs to my playlists.How can I do this?

I enabled computer home sharing between my fiance's apple computer and my windows computer, so I now can play his music on my computer; however, I am making playlists for our wedding and am unable to transfer any of his songs to my playlists. How can I do this?

Thanks
Are you sure that if I use my windows log in rather than my husbands, then open itunes it won't delete all his hundreds of songs and overwrite with mine?
I want to maintain my own apple ID login and he wants his but without losing his songs.....
how do i transfer the content of my itunes including apps and songs to the new computer. There doesn't seem to be an easy explanation on here. Do I just plug my iPhone in and it will all transfer?

Is there any difference between R/3 4.7 version and ECC 5.0????

Hi All,
Is there any difference between R/3 4.7 version and ECC 5.0 for the transaction RSA5.
Regards,
Andy

Andy
Functionality wise I didn't see any difference other than new datasources in ECC5.0
Thnaks
Sat

Formating between 10.1.3.3.2 and 5.6.2

Similar Messages

Maybe you are looking for