Formatting DATEs with FORMAT clause and not with "to_date()" ?

Well I know I could format a DATE inline with the to_date() function.
But is there a way to format it in a separate FORMAT clause similar to
numbers?
If yes how would a format of
dd.mm.yyyy
or
yyyy.mm.dd hh:mm:ss
look like?

user559463 wrote:
Ok, again I am searching something like
COLUMN "expiry" FORMAT "YYYY.MM.DD HH:MM:SS"No, it can only be done via TO_CHAR or NLS_DATE_FORMAT. I think you should read SQL*Plus COLUMN command.
SY.

Similar Messages

Changed my ID but the Iphone 4 continue with the old ID name and does not syncronize. How can I change it in my Iphone so I can continue to use all my data stored like contacts and notes?

Changed my ID but the Iphone 4 continue with the old ID name and does not syncronize. How can I change it in my Iphone so I can continue to use all my data stored like contacts and notes?

Do you mean through iCloud? You need to go to settings > iCloud and "delete account" and then sign in with the newly named account. You'll want to do similar for facetime, messages, and store.

I had a second hard drive added to my Mac Pro. How do I format it and not effect my orginal hard drive?

I had a second hard drive added to my Mac Pro. How do I format it and not effect my orginal hard drive?

Just format it with Disk Utility as mentioned above. Select the new disk on the list at the left. Click the erase tab. Specify Mac OS Extended (Journaled) if not already specified and give the disk a name of your choice. Then click the erase button.
That's the simplest way to format a disk with a single partition (volum). If you want to create multiple volume (partitions) then click the Partition tab instead of Erase. You can then use then specify a number of volumes and size each volume by specifying its size or just dragging the slider in the bootm right of each partition. Give each a name as before and again Mac OS Extended (Journaled). Click Apply button to create the partitions.
Since you appear to be new at this just "play" with the erase and partition settings so you can become comfortable with them. So long as you have the new disk selected on the left you can't really hurt anything since it's a new disk and no data to loose. You can always go back and erase it back to a single partition.

After installing the latest software from apple on my Iphone4, I have not been able to retrive my saved data in contact list and notes, evidently I did not create a back up to the system first? is there any solution to restore my system. technical support

how do I restore my system or my lost contact list and notes, that I lost when I upgraded with I tunes. technical support and store people where unable to help
I tried many solutions, but none seeemed to work, any genius suggestions?
I think this is a flow in the system when you can not do restore. which should be done automaticaly, we are not all computer savy?!

Go to iTunes menu, EDIT/PREFERENCES/DEVICES tab, do you see any Backup files with Date and Time? These are the backup file you have everytime you sync your device to your iTunes.
Now close the dialogue box, connect your device to your computer. In iTunes left Pane, your iPhone will appear under "Devices". Right mouse click yout iPhone and select Restore from backup, select the backup from Date and Time you can remember that has all the contacts and notes and proceed from there.

Hi, How to change date pattern in project panel in order to sort media according to date YYYY-MM-DD and not MM/DD/YY ?

Hi
Question is in the title
I have the list of media and when I add columns from "metadata panel to the project panel, all dates are MM/DD/YY format and sort is not relevant !!
Where can I change this pattern to the right one ?
Thanks
Emmanuel

If you are on a PC then the instructions shown here should work for you. They did for me.
Change the display of dates, times, currency, and measurements - Windows Help
You just need to quit out of Premiere Pro after making the change and then start it up again.

Data exist in PA0008 and not in Employee (Attributes) 0EMPLOYEE_ATTR

I am using standard reports from the cube 0PA_C01 (Headcount with personnel actions) but i am experiencing some data are not coming in the master data 0EMPLOYEE_ATTR
specially these fields
Pay scale type
Pay scale area
Pay scale group
Pay scale level
for new entries data is coming but for old entries no data is coming
in RSA3 the extractor is bringing all the fields except those fields coming empty
but in the table PA0008 the data exists for the same employees,
the info object is using FULL UPDATE and these data are not coming
can anyone help ???

after my investigations i found the following
in BI 7.x
Field in BI : SLTYP "Pay grade type"
Table : PA0008
Field in Table of Origin : TRFAR
in BI 3.x
Field in BI : SLTYP "Pay grade type"
Table : PA0008
Field in Table of Origin : SLTYP
so now the field is the same as TRFAR : Pay scale type
my problem now is for some employees data is coming in SLTYP and for others it is coming in TRFAR and they are picking from the same field in PA0008 which is TRFAR
the extractor is extracting the data like this employees has personnel no < 15332 is coming in SLTYP and >= 15332 in TRFAR
i know it is looking silly but this is my situation
thanks

Urgent!!! Date works in DEBUG and not in Deployment Manager

Hi all
I am working on a Japanese project..I have the database with the character set (nls) set to japanese.
My mapping works in the Debug mode.. but after compiling and executing in the Deployment Manager throws the ORA-01847.
I dont understand the differences..
I have my locale set to Japanese and the MDL display also set to Japanese. I have set the regular settings in the Registry also.
Please help in this regard.
Thanks & Regards
Shariff

Hi Azraf,
I guess when debugging you don't use the entire dataset that is going to be loaded, yes?
What's your error about:
ORA-01847 day of month must be between 1 and last day of month.
Cause: The day of the month listed in a date is invalid for the specified month. The day of the month (DD) must be between 1 and the number of days in that month.
Action: Enter a valid day value for the specified month.
Seems it could be a simple thing (i.e. a wrong date), but I most say I don't have any experience with Japanese settings that might interfere with this logic.
Good luck, Patrick

Shows updates up to date But is 12. and not 12.1

Having problems with crashing when using titles have seen that there is a version 12.1 download but when I use updates in help say no updates

What is the actual error message that you are getting, and what version of iOS do you have on your phone (Settings > General > About > Version) and what version of iTunes do you have installed on your computer (and what OS do you have on your computer) ? iOS 7 requires iTunes 11.1+ (I think) on a computer.

I have an Iphone 5s that on the last sync lost most of contact data except name, company and notes. All ok on my lap top in outlook. I cannot seam to correct this issue.

I am worried if I do a complete reset I will lose all text data from the phone (which i believe is never backed up). Not that I know this would solve the problem.
Is the icloud to blame? Any help appreciated. See photo - All tel, fax, email, web data gone.

All I had to do was complain. I synced my iPhone to the Windows machine, checked the other account at iTunes prompting (where no apps had shown up previously), reconnected the iPad, and 140 apps downloaded including the App Store. I have no idea why.

How to recover my iPhone 6 from disabled without losing my data as the backup in my iTunes is old and not updated.

Hi,
I have iPhone 6 and the after the screen has broken the phone was starting to enter random passcode from itself until its locked and disabled. I have replaced the screen with a new one and I need to make a backup of my data in the phone and not reset or restore from the phone backup in my iTunes as it's old and not updated. Kindly advise me how to make this task as I have important data I need to not lose.
Best regards,
Mohammad Al-Nafisi
[email protected]
Mobile Phone: +966552034444

You cannot now. The only way to reset the passcode and remove the disabled status is to restore the device. There is no way to make a new backup now. That is actually the whole point of the passcode attempt limitation and the disabling of the device - to keep someone without the passcode from getting at your data. Once disabled, your sole single recourse is to restore it in order to be able to do anything with it.
At this point you can restore from your existing backup, or as new. Either way, you've already lost the current data on the device.

Group by clause and having clause in select

hi frnds
plz give me some information of group by and having clause used in select statement with example
thanks

The Open SQL statement for reading data from database tables is:
SELECT      <result>
INTO      <target>
FROM      <source>
[WHERE    <condition>]
[GROUP BY <fields>]
[HAVING   <cond>]
[ORDER BY <fields>].
The SELECT statement is divided into a series of simple clauses, each of which has a different part to play in selecting, placing, and arranging the data from the database.
You can only use the HAVING clause in conjunction with the GROUP BY clause.
To select line groups, use:
SELECT <lines> <s1> [AS <a1>] <s2> [AS <a2>] ...
               <agg> <sm> [AS <am>] <agg> <sn> [AS <an>] ...
       GROUP BY <s1> <s2> ....
       HAVING <cond>.
The conditions <cond> that you can use in the HAVING clause are the same as those in the SELECT clause, with the restrictions that you can only use columns from the SELECT clause, and not all of the columns from the database tables in the FROM clause. If you use an invalid column, a runtime error results.
On the other hand, you can enter aggregate expressions for all columns read from the database table that do not appear in the GROUP BY clause. This means that you can use aggregate expressions, even if they do not appear in the SELECT clause. You cannot use aggregate expressions in the conditions in the WHERE clause.
As in the WHERE clause, you can specify the conditions in the HAVING clause as the contents of an internal table with line type C and length 72.
Example
DATA WA TYPE SFLIGHT.
SELECT   CONNID
INTO     WA-CONNID
FROM     SFLIGHT
WHERE    CARRID = 'LH'
GROUP BY CONNID
HAVING   SUM( SEATSOCC ) > 300.
WRITE: / WA-CARRID, WA-CONNID.
ENDSELECT.
This example selects groups of lines from database table SFLIGHT with the value LH for CARRID and identical values of CONNID. The groups are then restricted further by the condition that the sum of the contents of the column SEATSOCC for a group must be greater than 300.
The <b>GROUP BY</b> clause summarizes several lines from the database table into a single line of the selection.
The GROUP BY clause allows you to summarize lines that have the same content in particular columns. Aggregate functions are applied to the other columns. You can specify the columns in the GROUP BY clause either statically or dynamically.
Specifying Columns Statically
To specify the columns in the GROUP BY clause statically, use:
SELECT <lines> <s1> [AS <a 1>] <s 2> [AS <a 2>] ...
               <agg> <sm> [AS <a m>] <agg> <s n> [AS <a n>] ...
       GROUP BY <s1> <s 2> ....
To use the GROUP BY clause, you must specify all of the relevant columns in the SELECT clause. In the GROUP BY clause, you list the field names of the columns whose contents must be the same. You can only use the field names as they appear in the database table. Alias names from the SELECT clause are not allowed.
All columns of the SELECT clause that are not listed in the GROUP BY clause must be included in aggregate functions. This defines how the contents of these columns is calculated when the lines are summarized.
Specifying Columns Dynamically
To specify the columns in the GROUP BY clause dynamically, use:
... GROUP BY (<itab>) ...
where <itab> is an internal table with line type C and maximum length 72 characters containing the column names <s 1 > <s 2 > .....
Example
DATA: CARRID TYPE SFLIGHT-CARRID,
      MINIMUM TYPE P DECIMALS 2,
      MAXIMUM TYPE P DECIMALS 2.
SELECT   CARRID MIN( PRICE ) MAX( PRICE )
INTO     (CARRID, MINIMUM, MAXIMUM)
FROM     SFLIGHT
GROUP BY CARRID.
WRITE: / CARRID, MINIMUM, MAXIMUM.
ENDSELECT.
regards
vinod

Bookmarks and notes saved when deleting a book from iBooks?

If I delete a book from my iPad or iPhone, do I lose my bookmarks and notes on iCloud? Will by notes reappear if I re-download a deleted book? Thank you.

Greetings janetk618,
I read your post, and it sounds as though you'd like to learn more about iBooks. You can sync iBooks data such as bookmarks and notes. The following article contains a wealth of information about iBooks:
Frequently asked questions about iBooks - Apple Support
Thank you for contributing to Apple Support Communities.
Best,
Bobby_D

LSO FE - No Trainings in "Messages and Notes" - Box

Hello LSO-Gurus,
my Problem concerns the following aspects:
A Learner has some Prebookings for Trainings. The Course Administrator creates some new Trainingappointments but in the Learning Portal the Learner is not able to see these new dates. The Messages and Notes box stil shows the "No Messages"-Text.
we are on EHP 4. I deleted local cookies and refreshed the Servercache, but the new dates are still not visible. Any Ideas?
Kind Regards
Sebastian

Hello,
Check if all the setting in HRLSO & SEMIN GROUP in T77S0 are correct. if Yes then consult portal consultant for any activations.
thanks
good luck

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?

How Do i create a list that will show in a dropdown box with the list being pulled from another tab and not the cell data format junk?
I currently run OS X 10.10.1
Now i have been trying to work on this for a while now and what i want to do should be simple but its apparently not.
Here is an example of what i want to happen.
I will have 2 tabs: Contact | Sales
Now Contacts will have the list of names and various information about a customer, While Sales will have one drop-down box for each Cell Row that will show the names of the person in tab contacts
for what i am wanting to do i cant use the data format pop-up menu because the list is edited everyday several times a day.
Now how do i do this, Excel can do this so how can numbers do it?

Hi Shegra,
Paste this into a applescript editor window and run it from there. In the script you may need to adjust the four properties to agree with your spreadsheet. Let me know if you have any questions.
quinn
Script starts:
-- This script converts column A in one table into an alphabetized list of popups. It copies the last cell in that column. Then reverts the column to text. It then refreshes popups in column A of a data table starting with a user defined row.
property DataEntrySheet : "Sheet 1" --name of sheet with popups to be refreshed
property DataEntryTable : "Sales" --name of table with popups to be refreshed
set copyRange to {}
property PopValueSheet : "Sheet 1" --name of sheet with popup values table
property PopValueTable : "Contacts" --name of table with popup values
set PopStartRow to {}
tell application "Numbers"
set d to front document
set ps to d's sheet PopValueSheet
set pt to ps's table PopValueTable
set s to d's sheet DataEntrySheet
set t to s's table DataEntryTable
set tf to t's filtered --this records filter setting on data Entry Table
display dialog "Start from row #..." default answer "" with icon 1 -- with icon file "Path:to:my.icon.icns" --a Week # row
set PopStartRow to {text returned of result}
tell pt --convert list to alphabetized popups
set ptRows to count rows
set copyRange to ("A2:" & name of cell ptRows of column "A")
set selection range to range copyRange
set selection range's format to text
sort by column 1 direction ascending
set selection range's format to pop up menu
-- popupsmade
set selection range to cell ptRows of column 1 of pt
set v to value of cell ptRows of pt
end tell
activate application "Numbers"
tell application "System Events" to keystroke "c" using command down
tell pt
set selection range to range copyRange
set selection range's format to text
end tell
tell t
set filtered to false
set tRows to count rows
set pasteRange to ((name of cell PopStartRow of column "A") & ":" & (name of cell tRows of column "A"))
set selection range to range pasteRange
tell application "System Events" to keystroke "v" using command down
set filtered to tf
end tell
end tell

I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

I am having trouble getting a numbers spreadsheet to hold different formats in the same column. A column with a date formatted heading will not convert to $ for the cells below.   Any suggestions would help.

Hi Wayne,
Thank you for this response. I have tried this but when I start enterring $ amounts some, such as $6.00, go in OK others such as $4.00 appear as a date ie 4 Oct 12.
Kind regards
Paul

Formatting DATEs with FORMAT clause and not with "to_date()" ?

Similar Messages

Maybe you are looking for