Formatting error when displaying OSS note w/PDF

While searching & displaying OSS notes, I click the PDF button to print or download the note. I then get a message "An error occurred when formatting the SAP note.". Has anyone seen this and have suggestions for correcting it? My colleague is able to bring the note up in PDF format just fine, so it's something unique to my PC or Adobe reader.

I've seen this last week too - no matter what PC I was using.
If it doesn't work after a while I'd open an OSS call
Markus

Similar Messages

"Bad image format" error when displaying an image on Nokia 6600

I get a "bad image format" error when I try and display an image on a Nokia 6600 cellphone. The image displays correctly when I run it on the J2ME 2.1 Emulator, but gives an error on the phone. Plz help!!

More info please... what kind of an image are you trying to display?

CALL FUNCTION SEND ERROR when displaying attendance report in PDF format.

We implemented SSO/webgui. The users did not have any issues with printing reports from SAPGUI. In webgui, however, we had to define a Local PDF1 printer, per SAP Note 771683. When users prints this report, it is generating 1-5 CALL_FUNCTION_SEND_ERROR. We have Central Instance and 5 additional instances on 3 app servers. Sometimes it generates 1 dumps, sometimes 2, etc. The dump do not occurred on the instances you are logged into. The dump contains the following:
ShrtText
    " " (I/O error)
What happened?
    "CPIC-CALL: 'ThCMSEND'#connection closed#"
An error occurred when executing a Remote Function Call.
Error analysis
    An error occurred when executing a Remote Function Call.
"CPIC-CALL: 'ThCMSEND'#connection closed#"
Status of connection.... "CODE=CM_DEALLOCATED_NORMAL CM_SEND_RECEIVED
     CM_COMPLETE_DATA_RECEIVED SAPCODE=0 CONV=04892091"
    Internal error code.... "RFC_IO5"
There is an error in the communication system. To clarify
    and resolve the error, contact your system administrator.
Transaktion......... " "
Programm............ "SAPLSICM"
Dynpro.............. "SAPMSSY1 3004"
Dynprozeile......... 2
Informationen zum Aufrufer des Remote Function Calls (RFC):
System.............. "HRP"
Datenbank-Release... 640
Kernel-Release...... 640
Verbindungstyp...... 3 (2 = R/2, 3 = R/3, E = Extern, R = Reg. Extern)
Aufrufsart.......... "asynchron with reply (imode 0)" (S = Synchron, a/A =
   Asynchron, T = Transakt. )
Mandant............. 600
Benutzer............ "CG1981"
Transaktion......... " (Program: SAPLSICM)"
Funktionsbaustein... "ICM_CACHE_UPLOAD"
Information on where terminated
    The termination occurred in the ABAP program "SAPLSICM" in "ICM_CACHE_UPLOAD".
    The main program was "SAPMSSY1 ".
The termination occurred in line 18 of the source code of the (Include)
     program "LSICMV11"
of the source code of program "LSICMV11" (when calling the editor 180).
Source Code Extract
Line SourceCde
1 *******************************************************************
    2 *   THIS FILE IS GENERATED BY THE FUNCTION LIBRARY               **
    3 *   NEVER CHANGE IT MANUALLY, PLEASE!                            **
    4 *******************************************************************
    5 FORM ICM_CACHE_UPLOAD %_RFC.
    6 * Parameter declaration
    7 DATA URL TYPE
8 ICMURL
9 .
10 DATA DATA TYPE
11 ICMDATA
12 .
13 DATA GLOBAL LIKE
14 SY-INDEX
15 .
16 * Assign default values
   17 * Call remote function
>>>>>   CALL FUNCTION 'ICM_CACHE_UPLOAD' %_RFC
   19      EXPORTING
20        URL = URL
21        DATA = DATA
22        GLOBAL = GLOBAL
23   .
24 ENDFORM.
We are on ERP 2004, kernel level 156, and Basis SP18. I have Adobe Reader 8.
Our CI Service Port is 8009.
I have not seen any posting if there is a PDF limitation, e.g., width limitation, report contains rows highlighted in various colors.

Dear Elaine,
check notes
<a href="https://service.sap.com/sap/support/notes/764734">764734</a>
<a href="https://service.sap.com/sap/support/notes/688372">688372</a>
or you might want to try to comment out line 118 of the function module
ICM_CACHE_UPLOAD which reads like this
PERFORMING RECEIVE_DATA_UPLOAD ON END OF TASK
If this does not solve the problem, give a detailed description on how to reproduce the dump and put that into an error message with SAP. It should go to BC-CST-IC.
Best Regards,
Tim

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read"

I get the following error when trying to open a pdf file... '*pdf.part could not be saved, because the source file could not be read". I am able to open pdf files in IE and other programs.

I am encountering the same problem -- though with .qfx files from my bank. This worked fine in Firefox 31 ESR, but since upgrading to Firefox 33.0, I get the "<name>.qfx.part could not be saved, because the source file could not be read" when I attempt to download. (I should add that downloading PDF statements from the same site works fine, and that the qfx downloads work fine in IE and Chrome.)
I tried safe mode, it is still broken. Tried v34 beta, no luck. I reverted to version 31, it works again.
I guess I will stick with the older version until a solution is found...or just use an alternate browser to download my financial data.

Unrecognized database format error when trying to access addin to Acrobat reader?

I get an "Unrecognized database format" error when trying to access addin to Acrobat reader so I can use Pro to edit a pdf document? What do I do so that teh ACCESS program aI am generating PDF's from uses Pro and not Reader?
Thanks,
Dan

Adobe Reader and Acrobat Professional are 2 different products. Reader is for free and limited as to what it can do an support.
Add-ins can only use features supported by Reader.
You need Acrobat to edit PDF forms. Acrobat no longer supports access to SQL databases through Acrobat JavaScript.
If you have an add-in and Acrobat can use it for filling a PDF form from Access, you need to talk to the developer to see if it can work with Reader.

Error when displaying xellerate form

Hello,
I have the following error when displaying the form of any xellerate users :
ERROR,03 May 2011 10:40:56,273,[XELLERATE.APIS],Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-19'
All is working fine, just this error that is diplayed each time I want to display a user form. In my formMetadata.xml, I have the following definition for the field -19, it is the manager :
<Attribute name="-19" label="global.label.managerid" displayComponentType="LookupField" variantType="long" dataLength="50" map="Users.Manager Login">
<ValidValues lookupColumnNames="User ID,Last Name,First Name" lookupQuery="SELECT usr.usr_key,usr.usr_last_name,usr.usr_first_name,usr.usr_login FROM usr, ugp, usg WHERE ugp.ugp_name = 'PROF_MANAGER' AND ugp.ugp_key = usg.ugp_key AND usr.usr_key = usg.usr_key AND usr.usr_status = 'Active' AND usr.usr_emp_type = 'Employee'" displayColumns="Users.User ID,Users.Last Name,Users.First Name" selectionColumn="Users.User ID"/>
</Attribute>
What is the problem with my attribute definition ?
Thanks for your help,
Kind regards,
mdadikn

Hello,
I'm new to OIM. I am a new hire to a group that had a contractor setup the whole system. I'm finding a similar issue on our system here. I've looked through the database and cannot seem to find the issue. Error happens when from the webapp clicking on "Create IT Resource".
From the Error Log:
Class/Method: tcFormDefinitionOperationsBean/getFormFieldPropertyValue encounter some problems: Property 'Column Names' has not defined for the form field '-82'
Line with issue from FormMetaData.xml:
<Attribute name="-82" label="global.label.itresourcetype" displayComponentType="LookupField" variantType="String" dataLength="255" map="IT Resources Type Definition.Server Type" useInRule="true">
<ValidValues lookupQuery="select svd_svr_type from svd" selectionColumn="svd_svr_type"/>
</Attribute>
Please let me know any additional information/questions. From what I can tell everything should be correct. Sorry again if the answer is obvious, I'm only 3 days into OIM.
Thank you,
Ryan

ABAP Run time error when display the Customs Export declarations

Hi,
I'm receiving ABAP Run time error when display the Customs Exp. Declarations Under SAP Customs Processing -> Customs Processing - Import / Export -> Monitoring.
Error messaging point to Function Module - /SAPSLL/CUHD_LOAD_SELECTION.
While debugging we found that Primary Key of the below structures are not the same
lt_corpar                              type      /sapsll/corpar_t
lt_corpar_ht      type      /sapsll/corpar_k02_ht
Does anyone has the SAP Notes or solution to this issue other than changing the structures manually. I'm not sure about the impact if i change manually
Error message short details
Termination occurred in the ABAP program "/SAPSLL/SAPLCUHD_SELECTION" - in
     "/SAPSLL/CUHD_LOAD_SELECTION".
    The main program was "/SAPSLL/CULO_DISPLAY_CUS_EXP ".
    In the source code you have the termination point in line 144
    of the (Include) program "/SAPSLL/LCUHD_SELECTIONU01".
We are on GTS Release 8.0 and Support Package SAPK-80014INSAPSLL (Support pack level 14).
Regards,
Pradeep Maddi

Hi,
I have implemented SAP Note 1531799, but it hasn't resolved the current issue.
For Our GTS instance, there are 2 Feeder Systems (ECC) attached, but document transfer in one of the system has not been activated. Both having the same partner functions ( We copied the sandbox into 2 different instances for different business Testings and now these 2 instances attached to GTS for testing). These feeder systems have different Logical system names and Logical system groups.
Recently i have implemented SAP Corrections manually for one the issue, Please see below thread for the detail information
Proforma Invoice not transferred to GTS
After implementing the corrections, i have created Pro-forma invoice in ECC system. When i tried to display, i'm facing the ABAP Dump issues.
Error details
Runtime Errors         ITAB_DUPLICATE_KEY
ABAP Program           /SAPSLL/SAPLCUHD_SELECTION
Application Component SLL-LEG
You tried to insert an entry into table "\FUNCTION=/SAPSLL/CUHD_LOAD_SELECTION\DATA=LT_CORPAR_HT". However, updating the unique table key "PRIMARY_KEY" resulted in a duplicate entry. The key concerned may be either the primary key or a secondary key.
Regards,
Pradeep

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Please help. Keep getting a conversion error when trying to convert a PDF to a .docx. Advice?

Sara,
Please see my answers in bold below.
What browser are you using? Try clearing the cache, or using a different browser. N/A
Are you converting from within Reader, or directly via the ExportPDF website. Within Reader.I disabled the OCR and this did not work either. Try converting from within Reader, and disable OCR as detailed in this document: How to disable Optical Character Recognition (OCR) when converting PDF to Word or Excel.
Are you on a networked computer? Make sure that there aren't any firewall/proxy settings that are preventing you from uploading files to the Internet. Not having problems uploading the file--that works fine.
Make sure the file is within the file-size limit of 100 MB. It is <40.
I get the error message, "File failed to be converted using Adobe ExportPDF online."
Thanks for your help in advance.

I get this error when downloading key not valid for use in specified state what do i do

i get this error when downloading key not valid for use in specified state what do i do

What is your operating system? What are you trying to download?

Ent-06972 Error When Displaying BIBeans for Dimension Dataviewer

dear all,
I have problem when trying to view data on dimension with dataviewer in OWB 11g. it's no problem when i load small amount of data, but when i load huge amount of data i've got error message "ent-06972 Error When Displaying BIBeans for Dimension Dataviewer ". is it some kind of bug in OWB?

I am also getting the same error, using 11g.

Error when display a CRM Attachment - doc or pdf

Hi All,
I'm getting this error when I try to display the attachment in CRM.
"No document display because of missing Customizing for HTTP service '/default_host/sap/bc/contentserver' -> See SAP Note 606745"
We have activated the contentserver in transaction SICF. I can attach a document but cannot display...I can attach .doc and pdf files.
Is there any missing settings to display that attachment?
thanks,
Ken

Hi Ken,
On top of this you can create external alias for service '/default_host/sap/bc/contentserver' as mentioned in step 1 of note
'606745'. Furthermore please also check your browser settings as per note 818685 point 3:
Following settings are required in client PC :
Microsoft Internet Explorer 5.0 and above is required.
Activate 'Active Scripting'
Activate 'Run ActiveX controls and plug-ins'
Activate 'Initialize and script ActiveX controls not marked as safe
thanks
Willie

"The file is damaged and could not be repaired" error when trying to open a PDF in Reader

A few of our employess (only 3 out of over 100 so far) have been getting the error, "The file is damaged and could not be repaired" when trying to open some PDFs. Other people are able to open the same PDF files with no error. It's happening on about 10% of the time. I've read a bunch of threads here with this isue and tried some suggested fixes and nothing has resolved the issue. Here is what I have found works and does not work and the info on their computers:
Computers:
1 Dell Vostro desktop running WIndows 7
1 Toshiba Satellite C55 runnign Windows 8
1 Samsung ATIV Book 4 running Windows 8
All using Adobe Reader XI but we did uninstall that version and tried previous versions and still got the error.
Did Not Work:
As suggested by the company that we use online for claims adjustments where this error is occuring, we tried using a different PDF creator since the files were created using a free PDF creator by the employees. PDF995 and PDFcreator (pdfforge) did not resolve the issue. I then created the PDFs with my Adobe Acrobat, uploaded from my computer to the online program, and that did not resolve the issue.
Saving the file to hard drive and then opening in Adobe did not work.
Turning off Protected Mode and Enhanced Security did not work.
Compatibility View settings enabled in Internet Explorer 10 did not resolve the issue. The previously mentioned claims adjustment software company we use online was code for IE so is not fully compatible with other browsers.
That being said I did try to open the PDF files in Chrome and it also did not work. Same error message.
Does work:
I download the file they cannot open onto my hard drive, open in Adobe Acrobat, Save as a pdf, then email it to them and they can open it via email attachment.
If they close the error and continue trying to open the file over and over sometimes it will eventually open.
Is there a setting in Windows that is preventing them from opening a small % of files some of the time? Thanks in advance for any help!
James

If anyone is reading this still looking for what caused the issue and how to fix it here is what I discovered.
The antivirus program our company uses, Bitdefender Antivirus Plus, was causing some of the PDF files not to open. After troubleshooting the different modules and settings the culprit was..
Scan SSL in Privacy Control Settings. Turning it OFF solved the problem and all the PDF files that previously would not open now open just fine. This issue has been sent to Bitdefender for them to review. If you use a different antivirus program and are having this issue try locating the Scan SSL setting and see if turning it off solves the problem.

HT201413 when trying to connect itunes to store, error (-3212) display and not able to connect store

When trying to connect itunes to store, error (-3212) appear and not able to connect itunes

iTunes has been denied by your firewall. Add iTunes to your firewall allowed list.

Error when displaying - on table control

hy guys,
im working with a table control..
the problem is when the table control loads a -200 or any number with - .
ERROR
DYNPRO_FIELD_CONVERSION
I already tried to change the format of the table field to currency, dec, char and numc
currency the error is displayed.
dec the error is displayed
char the column is displayed empty
numc the table is displayed but the - is not displayed in the field.
any ideas?
Edited by: javier santana on Sep 7, 2008 7:26 PM

Hi,
The problem mayb with the -ve value display, keep the format to currency and double click on the field in table control, u wil find a option to display -ve values select that
If -ve value is ur prob then this should work

FPRUNX001 error when fp_docparams-fillable = 'X', else PDF is created.

Hi,
When I use following code, I get FPRUNX001 system error that : Request start time: Sun Dec 23 23:11:47 CST 2007 (200101)...
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
fp_docparams-fillable = 'X'.
CALL FUNCTION fm_name
EXPORTING
    /1bcdwb/docparams = fp_docparams
qmnum = qmnum
IMPORTING
    /1BCDWB/FORMOUTPUT = formout
EXCEPTIONS
    usage_error        = 1
    system_error       = 2
    internal_error     = 3
    others             = 4.
but when i remove 'fp_docparams-fillable = 'X'.'... and just use below code it creates a PDF (can not enter values in input fields of pdf form though).
fp_docparams-langu = 'E'.
fp_docparams-country = 'US'.
CALL FUNCTION fm_name
EXPORTING
    /1bcdwb/docparams = fp_docparams
qmnum = qmnum
IMPORTING
    /1BCDWB/FORMOUTPUT = formout
EXCEPTIONS
    usage_error        = 1
    system_error       = 2
    internal_error     = 3
    others             = 4.
How do I make this to work for interactive PDF without making fp_docparams-fillable = 'X'....
please advice.
Thanks.
Sudhir

Dezso,
We do have a credential file installed into our ADS already.
I found OSS Note 1090486 that may have something to do with this.
Any thoughts?
Thank you,
Stephen.
(I work with Sudhir)

Formatting error when displaying OSS note w/PDF

Similar Messages

Maybe you are looking for