Formatting Spry Tabs to start from left to to right

I'm currently working for Arabic version of a webpage, the menus and other contents should start from right to left. Does anyone who know how to set the Spry Tabs to start the tabs from left to right?
Thanks,
Mylyn

Add the following to your document
<style>
.TabbedPanelsTab {
float: right;
</style>
Gramps

Similar Messages

How to achieve Vertical Text,start From left to right?

How to achieve Vertical Text,start From left to right?
Maybe it does not make sense for English,but it is Quite useful for Chinese

@喜狼_edny – hm. Possible, but the result is somehow unsatisfactory.
See for yourself.
We could start with some text right aligned in a table with just one single cell:
We could rotate the cell to 270° like that:
Code:
var myCell = app.selection[0].tables[0].cells[0];
myCell.rotationAngle = 270;
And now we need the text direction from right to left and all characters rotated to 180°:
Code:
var myCell = app.selection[0].tables[0].cells[0];
myCell.rotationAngle = 270;
myProperties = {
    composer : "$ID/HL Composer Optyca",
    characterDirection : CharacterDirectionOptions.RIGHT_TO_LEFT_DIRECTION,
    paragraphDirection : ParagraphDirectionOptions.RIGHT_TO_LEFT_DIRECTION,
    characterRotation : 180
myCell.texts[0].properties = myProperties;
Result:
Ugh! Not exactly the result we expected…
(Tested with InDesign CS5.5 on OSX 10.6.8)
It's the characterRotation that is not working as expected.
Uwe
Message was edited by: Laubender

Formatting Spry Tabbed Panel so tabs appear on the right side

Hi, I know this is a rookie question, but that is because I'm a rookie. How can I format a Spry Tabbed Panel so the tabs appear on the top-right side rather than the default top-left. I found the solution on the Adobe Labs site, but couldn't get it to work. If anyone can please help me with the code or point me in the right direction if I can change it with css. Thanks.

Add/modify the following
.TabbedPanelsTab {
float: right;
Using the above, you will have to remember that the first tab will be on the extreme right.
Gramps

Spry Tabbed Panels - Start with no default tab??

Hi all,
Is there any way that I can have a spry tabbed panels widget
and NOT have any tabs open when the page loads? I want to put
multiple tabbed panel widgets on one page for an artist's
discography
example:
Singles
- tab 1 - tab 2 - tab 3 - etc. etc.
Albums
- tab 1 - tab 2 - tab 3 - etc. etc.
Misc
- tab 1 - tab 2 - tab 3 - etc. etc.
I just want the page to look clean and compact - I don't want
any default tab to display. Is this possible? I looked on the Adobe
customization help for the widget but I can't seem to find an
answer. I managed to achieve this by deleting the
(this.defaultTab); part of this line in the .js file:
if (this.defaultTab)
this.defaultTab = this.getElement(this.defaultTab);
But when I did this, if I created multiple widgets, the
second widget and so on's tabs would not work properly, for some
odd reason. I'm kind of a newbie so I apologize for not making much
sense.
Thanks in advance.

Hi all,
Is there any way that I can have a spry tabbed panels widget
and NOT have any tabs open when the page loads? I want to put
multiple tabbed panel widgets on one page for an artist's
discography
example:
Singles
- tab 1 - tab 2 - tab 3 - etc. etc.
Albums
- tab 1 - tab 2 - tab 3 - etc. etc.
Misc
- tab 1 - tab 2 - tab 3 - etc. etc.
I just want the page to look clean and compact - I don't want
any default tab to display. Is this possible? I looked on the Adobe
customization help for the widget but I can't seem to find an
answer. I managed to achieve this by deleting the
(this.defaultTab); part of this line in the .js file:
if (this.defaultTab)
this.defaultTab = this.getElement(this.defaultTab);
But when I did this, if I created multiple widgets, the
second widget and so on's tabs would not work properly, for some
odd reason. I'm kind of a newbie so I apologize for not making much
sense.
Thanks in advance.

Format Text tab is missing from Edit on Top Level Site home page

Hello,
Hoping for some help - not sure where to go with this.
I've been working on a SharePoint site for my company.
I need to change the top level site main page text layout to 3 columns.
I am pretty sure I was able to do this a few days ago but now when I edit the page the Format Text tab is not there.
I can get it on all my sub sites, just not the top level site.
I must have screwed this up somehow but I haven't a clue as to how to get it back.
Thanks
Steve

Hi Steve,
It sounds as though the site template for your root web is a team site or general collaboration site that is using content pages stored in the sitepages library. Is that correct? If you are using publishing features than you could set a custom layout in
the "pages" tab, but it sounds as though you do not have this feature.
A workaround could be to create a new page with 3 columns, copy your homepage content to this new page and finally set the new page as your homepage.
Eric Overfield - PixelMill -
ericoverfield.com -
@EricOverfield

Moving Fields from left panel to right panel

Hello All
I am involved in configuring web ui screens. I want to actually move captions and fields from left panel ( Colums A-H) to Right Panel ( Colums I-P). When I go into field properties, it;s not giving me the option to enter colums from right panel.
Or show me how to do this
Please reply asap Gurus
Thanks

Hi,
Please follow below steps:
1. Go to config tab
2. Choose the right config.
3. Go to edit mode.
4, Display available fields.
5. you can see two blocks now. One with available fields and other with your displayed fields.
6. In your displayed fields block you can see two buttons in top left corner (right above A column). One with plus sign and other with minus. Similarly you can see two buttons on top right corner( right above P column) of your displayed fields block.
7. select a field you want to move from displayed columns by clicking on it. Click on minus button on top( the one above A). Now this field would be moved to available fields under its context node. Locate the field there.
8.Select the field on Available fields block and then click on 'plus' button on right side( one above P).
Your field would be moved to Right side.
Also you can click on a field and click on show properties button and directly mention the column where you want this field to appear( Make sure you are edit mode so that you can change the column names). Also while doing this please make sure the columns you are entering are not occupied by other field.
Hope that helps.
Regards,
BJ

Anchor in Safari is not working from left to the right (visa versa) other browsers are working corectly with this!

Hi,
The Safari anchor problem is back! But now for using an anchor from the left to the right and visa versa (it is for a website design).
Apple solved the problem for using the anchor from the top to bottom and bottom to top but NOT from the left to the right and right to the left.
I test it in several browser (Firefox, Chrome, Opera, IE8, even in IE7 is it working ;-) but not The Safari of the Big Apple!!!
You can test it here: http://www.douma.biz/anchor_problem_safari/
I put a little script in it so it is going smooth to the right and left. It is also not working without the script, so that is not the problem.
You can test it in: Firefox, IE8, IE7, Chrome, Opera etc. But Safiri is it not working!
So can somebody help me? I tried the max-height, max-width, with and without overflow-x hidden, etc etc. but it is still not working in Safari.
Best regards,
Stephanie

Is it again a bug???

Can I change the position of change bars from left margin to right margin?

I want to display the change bars in right page margin. If the page is odd page,The change bars position is in left page margin. If the page is even page,The change bars position is in right page margin.

The global properties for Change bars are found in the Format > Document > Change Bars... menu option (or <esc> o b keyboard shortcut).
The property that you need to change is Position:
Depending upon which of the right or left margins is larger, you'll need to set this to "Side Closer to Page Edge" or "Side Farther..." to position the bars to the outside edges of the respective pages. If you have a symmetric layout, then "Closer" places on the left side (of all pages) and "Farther" places on the right.
However, if you have multiple columns, the change bars will appear between the columns and will shift depending upon which page edge is closer, i.e. the middle columns may be left or right on any given page.

Opening Videos from Left Menu Requires Right Click

I have multiple Windows 7 computers with iTunes installed. I have noticed that whan trying to open videos from the left menu, the only way to get it working is to wight click on the mouse, left clicking does not work. Does anyone know anything about this and how to resolve it?

I encountered the same problem. A quicker workaround then restarting firefox is to just minimize and maximize. Don't know why but that works.

Moving show/hide (+/-) icon from left end to right end in panelbox

HI,
Could anyone please suggest how to move the +/- icon in the panel box tabs aligned left to the panelbox title to the right end of the panelbox.
I want as below :
Currently :
[ + My title 1 ]
[ - My title 2 ]
[ + My title 3 ]
I want it like :
[ My title 1 + ]
[ My title 2 - ]
[ My title 3 + ]
Thanks in Advance
Jeffry
Edited by: Jeffry on Mar 24, 2011 3:13 AM

Hi,
I don't see an option for this. The popup header is rendered as a table with 3 cells. Even CSS (e.g. float:right) would change this
Frank

Change application bojects from left to right side

hi,
I try to change all my application objects (pages, regions, search bar, tabs, breadcrumb,theme, ................) from left side to right side.
any body help my?
thankyou ,
regards,

Hello Hasan,
>> I try to change all my application objects (pages, regions, search bar, tabs, breadcrumb,theme, ................) from left side to right side.
Right-To-Left support is not a single action that you take, and it’s not that simple. In my book, I included a dedicated chapter for the APEX Right-To-Left support, which reviews all the actions you need to take to achieve full Right-To-Left support.
A good start for you (other than ordering the book :) ) is to search this forum for keywords like Arabic, Hebrew and RTL. The forum includes several threads on the subject, which will give you a jumpstart.
Regards,
Arie.
&diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
&diams; Author of Oracle Application Express 3.2 – The Essentials and More

Is there any difference , selecting particular string from left to right

hi
we have a problem for selecting a string ...
we selecting a string from JEditorPane ..
useing JEditorPane.getselectedText();
After selecting text we adding some tags to selected text
it working fine when we are selecting from right to left .
when we are selecting text left to right it's not working .but
we geting selected text in both times(right to left, left to right) ..
pls help very urgent

I can only guess... But if it is true that you mean by 'selecting right to left' that the selection started at the right and ended on the left. Perhaps you are storing values from JEditorPane.getSelectionStart() and JEditorPane.getSelectionEnd(). If this is true, it could mean the failure you have in your code, because the number for getSelectionStart() is higher then getSelectionEnd() if you started from right and lower when you started from left. That could cause your problem.
You could fix this for example by this:
if (MyEditorPane.getSelectionEnd()<getSelectionStart())
change values.
or vice versa, hope that helps...

REPLACING CHARACTER STARTING FROM THE RIGHT.

Hey everyone,
The built-in function replace() replaces a character "." starting from left by default.
var txt:String = "2.5.";
if (txt.indexOf(".") == 1) // using (txt.lastIndexOf(".") == 1) does nothing.
txt = txt.replace(".","");
trace(txt); // 25.
There must be a simple method to replace "." starting from the right so that the traced output is "2.5".

"A built-in function would be preferable rather than those RegExp but it works."
I disagree.
One always can build a function. RegExp do wonders - so why overwhelm library with redundant functionality in the main library, especially as far as the top level objects like String are concerned?

Best way to sequence tabbed cards flying in from left onto a stack?

I've got an idea for a stack of tabbed 4 x 5 cards (like used in a card file) to fly in from the left (or somewhere), one at a time - and go in between the two words of a logo - as the letters of the text logo are streamed in from left to right.
Would a throw be the best way to make this work - or is there some obviously better way I'm overlooking?
BTW - I'd love to be able to start with them all stacked, and work backwards while designing the effect - flying them off to the left - as it would seem to be easier to have them all line up this way? (but I'd still have them fly in from left and onto the stack when the effect was played)
I'm fuzzy on the best workflow to create this effect.
Thanks!

Mark - I've followed your steps.
My problem is that even though I import a sequence of images, and it shows 1:10, only the 1st image seems to get imported, the rest are white?
If I play the sequence, only the 1st plays, then I see white.
If I view all the images NOT as a sequence, I can import them all and all of them show up as individually colored tabs.
If I remove the 1st one from the import folder, and import so that the 2nd one is the 1st, then this one - with a different color shows up.
So - I'm totally confused - as I have the 'Motion 3 - designing and Animating Motion Graphics in FCS2' book in front of me, and they clearly outline how to import a sequence of planes - and how you can play the sequence and see them all.
I created the PDFs using Illustrator CS2 on a IBM PC. They are in RGB format. OSX and FCP can see them all, I can open each one up and view it.
But - I just can't seem to bring them into a valid sequence?

Search Tab Goes Missing from the Left-hand Menu

Hi, I am using Spotify version 3.1.0.1117 in my trusty Toshiba Thrive (AT100) that runs Android version 4.0.4. I think it has just updated to the latest Spotify version and I notice that after initialising, the Search tab would go missing from the left-hand menu after browsing my playlists and not come back. The tab lists would start from Browse, and so on. Anybody else having similar problem? Any help is kindly appreciated. Thanks in advance.

The triangle next to the main Playlists folder is pointing down.
I set up a subfolder for a few streaming radio stations. The missing (and non-missing) playlists have not been put into a subfolder. They are all smart playlists (I don't know if that makes a difference).
I have the latest Itunes. Should I try re-installing?

Formatting Spry Tabs to start from left to to right

Similar Messages

Maybe you are looking for