Forms 5 - run fine on Win2000. WinXP has scrollbars
Our application is designed so that the splash screen and all subsequent forms fit within the frame of the application. No vertical/horizontal scrollbars.
We are just starting to get WinXP machines. When WinXP users start our application, the application window has vertical and horizontal scrollbars. This is because the look and feel of WinXP has fatter GUI widgets.
Can someone give me some ideas on how to eliminate the scrollbars for XP users? I would prefer if possible, to not have blank space for non-XP users.
thanks,
Rick
That did the trick, thanks!
One weird thing, though. I set it to height, width of about 1 inch bigger. I can see the full 1 inch on XP. But on Win2000 (my development machine), the window is only a couple of pixels bigger. It really isn't noticeable. Luckily, this is the exact behavior I want - no change for non-XP users, and a bigger window for XP users to eliminate the scrollbars.
Thanks to all who helped.
Rick
Similar Messages
-
EBS Forms functional script runs fine in OpenScript but not from OTM
Hi,
I have an EBS forms functional test script which runs fine in OpenScript, but when scheduled from OTM, the web part runs fine but when it comes to forms, the script fails with the following error:
Forms Object Not Found! XPath: //forms:window[(@name='NAVIGATOR')], Type: oracle.oats.scripting.modules.formsFT.helper.test.FormWindow, Cause: No Matches <Less>
I have performed all the steps below already:
1) Stopping the OATS Agent service and changing it to manual.
2) Starting the command prompt and running the AgentManagerService command as mentioned in your forum.
3) The console displays
C:\>C:\OracleATS\agentmanager\bin\AgentManagerService.exe -c AgentManagerService
.conf
wrapper | --> Wrapper Started as Console
wrapper | Launching a JVM...
jvm 1 | Wrapper (Version 3.0.3)
jvm 1 |
4) I have added the test in the OTM with the following command line settings:
-browser.type InternetExplorer -formsft.startup_timeout 30 -formsft.action_timeout 20 -formsft.response_timeout 10 -delayPercentage -1 -delayMin 0 -delayMax 5 -FormsAutomationEnabler.bat -enableForms true
But each time the script fails, please note that my script has assets and they are placed within the script folder.
Please help me on this at earliest.
Thanks,
AartiHello Aarti!
I had the same problem and this steps help to solve the problem:
You need to enable Forms Automation under agent. Please follow by below steps.
1.open command prompt
2.cd C:\OracleATS\agent
3.FormsAutomationEnabler.bat -enableForms true
4. Run script from OTM
Attila -
I receive REP-0501: Unable to connect to specified database. I run developer 6i application on windows 2008 r2. I have applied the nn60.dll and nnb60.dll files to the \BIN directory. The forms are working fine. The reports will only display after the correct user id (username, password and database connection string) is supplied. This is happening to all attempts to open already complied form. Pls, help.
If you are connecting to an Oracle 11g database, remember that by default the passwords are case sensitive. To disable that, run
ALTER SYSTEM SET SEC_CASE_SENSITIVE_LOGON = FALSE; -
@I run a Windows 8.1 - Photoshop CS5 under Parallels on an iMac one year old and both having the latest OS. I use a NIK plugin "VIVEZA" which run fine for years without a problem. Latelt and without a reason, the NIK plugin has gone corrupt, (can not use it more the 2 corrections after a get a black background message that there is not enough memory) and the system stops running and a must restart is required. How do I fix this terrible problem?
If it requires a Photoshop CS5 re-install, (I belief that it may fix the problem) and re-install the two third party plugins (NIK Viveza) and (Onone Perfect Resize) how and where do I get to the proper Adobe upload page to do that.
I have tried to fix this problem by changing the memory allocations, I have spend many hours on it and are very disgusted with it but it needs to be fixed. The current memory settings are;
Ram available = 1588 MB
Range = 873 -1143 MB
Recommended Photoshop usage range = 857 however I have tried every setting to max and in between. Nothing works. Current setting = 1588 (max)
The Photoshop I use is registered, I have product # and order # .Contact NIK for updated/upgraded versions of their plug-ins. They have been having a lot of issues with their plug-ins.
-
I have created a website using iWeb. It has been running fine, with no problems at all.
I have recently made some changes and the updates don't show in Safari, but when I open Firefox, the changes are there. It doesn't show the updates in Chrome on my iphone either? Any suggestions?You can also reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC) -
I have a mac book pro i7 2.00Ghz and 4Gb RAM. I want to run at the same time Omnisphere,Trilian and BFD 2. Will it work fine? Anybody that has some experience? Thanks
Well this is not a problem I have already bought one, my great worry is the processor and the memory..
-
PSE 9 was running fine but will not start now and I get the following message: This application has requested the Runtime to terminate in an unusual way.
I have an HP Desktop running XP Professional and tried Restore but it didn"t help. I was just going to uninstall and re-install but I can't get in to deactivate.See if anything here helps:
Troubleshoot C++ runtime errors | Adobe products | Windows -
Icons are not visible when the form is run
I develop a form with only a push button. I developed form using oracle 10DS. I have saved my form in application server. To see an icon in my button, i did the following things:
1. In application server i made a jar named test.jar. It consists of just two gif images.
2. I copied this jar in application server's \forms90\java directory
3. I configured formsweb.cfg file as the following.
4. my \form90\java\oracle\forms\registry\registry.dat is as the following.
whenever i run form i can not see icon but in client's oracle jar cache jar is downloaded.
-------------------------------formsweb.cfg -------------------------------------------
=========================
# $Id: formsweb.cfg,v 1.24 2003/08/22 01:07:35 pkuhn Exp $
# formsweb.cfg defines parameter values used by the FormsServlet (f90servlet)
# This section defines the Default settings. Any of them may be overridden in the
# following Named Configuration sections. If they are not overridden, then the
# values here will be used.
# The default settings comprise two types of parameters: System parameters,
# which cannot be overridden in the URL, and User Parameters, which can.
# Parameters which are not marked as System parameters are User parameters.
# SYSTEM PARAMETERS
# These have fixed names and give information required by the Forms
# Servlet in order to function. They cannot be specified in the URL query
# string. But they can be overriden in a named configuration (see below).
# Some parameters specify file names: if the full path is not given,
# they are assumed to be in the same directory as this file. If a path
# is given, then it should be a physical path, not a URL.
# USER PARAMETERS
# These match variables (e.g. %form%) in the baseHTML file. Their values
# may be overridden by specifying them in the URL query string
# (e.g. "http://myhost.mydomain.com/servlet/f90servlet?form=myform&width=700")
# or by overriding them in a specific, named configuration (see below)
[default]
# System parameter: default base HTML file
baseHTML=base.htm
# System parameter: base HTML file for use with JInitiator client
#baseHTMLjinitiator=basejini.htm
# System parameter: base HTML file for use with Sun's Java Plug-In
baseHTMLjpi=basejpi.htm
# System parameter: base HTML file for use with Microsoft Internet Explorer
# (when using the native JVM)
baseHTMLie=baseie.htm
# System parameter: delimiter for parameters in the base HTML files
HTMLdelimiter=%
# System parameter: working directory for Forms runtime processes
# WorkingDirectory defaults to <oracle_home>/forms90 if unset.
workingDirectory=
# System parameter: file setting environment variables for the Forms runtime
processes
envFile=default.env
# System parameter: JVM option for Microsoft Internet Explorer.
# This parameter specifies how to execute the Forms applet under
# Microsoft Internet Explorer 5.x or above. Put IE=native if you want
# the Forms applet to run in the browser's native JVM.
IE=JInitiator
# Forms runtime argument: whether to escape certain special characters
# in values extracted from the URL for other runtime arguments
escapeparams=true
# Forms runtime argument: which form module to run
form=test.fmx
# Forms runtime argument: database connection details
userid=
# Forms runtime argument: whether to run in debug mode
debug=no
# Forms runtime argument: host for debugging
host=
# Forms runtime argument: port for debugging
port=
# Other Forms runtime arguments: grouped together as one parameter.
# These settings support running and debugging a form from the Builder:
otherparams=buffer_records=%buffer% debug_messages=%debug_messages% array=%array%
obr=%obr% query_only=%query_only% quiet=%quiet% render=%render% record=%record%
tracegroup=%tracegroup% log=%log% term=%term%
# Sub argument for otherparams
buffer=no
# Sub argument for otherparams
debug_messages=no
# Sub argument for otherparams
array=no
# Sub argument for otherparams
obr=no
# Sub argument for otherparams
query_only=no
# Sub argument for otherparams
quiet=yes
# Sub argument for otherparams
render=no
# Sub argument for otherparams
record=
# Sub argument for otherparams
tracegroup=
# Sub argument for otherparams
log=
# Sub argument for otherparams
term=
# HTML page title
pageTitle=Oracle Application Server Forms Services
# HTML attributes for the BODY tag
HTMLbodyAttrs=
# HTML to add before the form
HTMLbeforeForm=
# HTML to add after the form
HTMLafterForm=
# Forms applet parameter: URL path to Forms ListenerServlet
serverURL=/forms90/l90servlet
# Forms applet parameter
codebase=/forms90/java
# Forms applet parameter
imageBase=codeBase
# Forms applet parameter
width=750
# Forms applet parameter
height=600
# Forms applet parameter
separateFrame=false
# Forms applet parameter
splashScreen=
# Forms applet parameter
background=
# Forms applet parameter
lookAndFeel=Oracle
# Forms applet parameter
colorScheme=teal
# Forms applet parameter
logo=
# Forms applet parameter
restrictedURLparams=HTMLbodyAttrs,HTMLbeforeForm,pageTitle,HTMLafterForm,log,allow
_debug,allowNewConnections
# Forms applet parameter
formsMessageListener=
# Forms applet parameter
recordFileName=
# Forms applet parameter
serverApp=default
# Forms applet archive setting for JInitiator
archive_jini=f90all_jinit.jar,classes12.jar,test.jar
# Forms applet archive setting for Microsoft Internet Explorer native JVM
archive_ie=f90all.cab
# Forms applet archive setting for other clients (Sun Java Plugin, Appletviewer,
etc)
archive=f90all.jar
# Number of times client should retry if a network failure occurs. You should
# only change this after reading the documentation.
networkRetries=0
# Page displayed to Netscape users to allow them to download Oracle JInitiator.
# Oracle JInitiator is used with Windows clients.
# If you create your own page, you should set this parameter to point to it.
jinit_download_page=/forms90/jinitiator/us/jinit_download.htm
# Parameter related to the version of JInitiator
jinit_classid=clsid:CAFECAFE-0013-0001-0017-ABCDEFABCDEF
# Parameter related to the version of JInitiator
jinit_exename=jinit.exe#Version=1,3,1,17
# Parameter related to the version of JInitiator
jinit_mimetype=application/x-jinit-applet;version=1.3.1.17
# Page displayed to users to allow them to download Sun's Java Plugin.
# Sun's Java Plugin is typically used for non-Windows clients.
# (NOTE: you should check this page and possibly change the settings)
jpi_download_page=http://java.sun.com/products/plugin/1.3/plugin-install.html
# Parameter related to the version of the Java Plugin
jpi_classid=clsid:8AD9C840-044E-11D1-B3E9-00805F499D93
# Parameter related to the version of the Java Plugin
jpi_codebase=http://java.sun.com/products/plugin/1.3/jinstall-13-win32.cab#Version
=1,3,0,0
# Parameter related to the version of the Java Plugin
jpi_mimetype=application/x-java-applet;version=1.3
# EM config parameter
# Set this to "1" to enable Enterprise Manager to track Forms processes
em_mode=0
# Single Sign-On OID configuration parameter
oid_formsid=formsApp_drsshl_C75ED7E7CA18492FA35AA090350527B7
# Single Sign-On OID configuration parameter
oracle_home=E:\Oracle_SHLAS
# Single Sign-On OID configuration parameter
formsid_group_dn=cn=Logical Application Group,
orclApplicationCommonName=formsApp_drsshl_C75ED7E7CA18492FA35AA090350527B7,
cn=forms, cn=Products, cn=OracleContext
# Single Sign-On OID configuration parameter: indicates whether we allow
# dynamic resource creation if the resource is not yet created in the OID.
ssoDynamicResourceCreate=true
# Single Sign-On parameter: URL to redirect to if ssoDynamicResourceCreate=false
ssoErrorUrl=
# Single Sign-On parameter: Cancel URL for the dynamic resource creation DAS page.
ssoCancelUrl=
# Single Sign-On parameter: indicates whether the url is protected in which
# case mod_osso will be given control for authentication or continue in
# the FormsServlet if not. It is false by default. Set it to true in an
# application-specific section to enable Single Sign-On for that application.
ssoMode=false
# The parameter allow_debug determines whether debugging is permitted.
# Administrators should set allow_debug to "true" if servlet
# debugging is required, or to provide access to the Forms Trace Xlate utility.
# Otherwise these activities will not be allowed (for security reasons).
allow_debug=false
# Parameter which determines whether new Forms sessions are allowed.
# This is also read by the Forms EM Overview page to show the
# current Forms status.
allowNewConnections=true
# Example Named Configuration Section
# Example 1: configuration to run forms in a separate browser window with
# "generic" look and feel (include "config=sepwin" in the URL)
# You may define your own specific, named configurations (sets of parameters)
# by adding special sections as illustrated in the following examples.
# Note that you need only specify the parameters you want to change. The
# default values (defined above) will be used for all other parameters.
# Use of a specific configuration can be requested by including the text
# "config=<your_config_name>" in the query string of the URL used to run
# a form. For example, to use the sepwin configuration, your could issue
# a URL like "http://myhost.mydomain.com/servlet/f90servlet?config=sepwin".
[sepwin]
separateFrame=True
lookandfeel=Generic
# Example Named Configuration Section
# Example 2: configuration affecting users of MicroSoft Internet Explorer 5.x.
# Forms applet will run under the browser's native JVM rather than using Oracle
JInitiator.
[ienative]
IE=native
# Example Named Configuration Section
# Example 3: configuration forcing use of the Java Plugin in all cases (even if
# the client browser is on Windows)
[jpi]
baseHTMLJInitiator=basejpi.htm
baseHTMLie=basejpi.htm
# Example Named Configuration Section
# Example 4: configuration running the Forms ListenerServlet in debug mode
# (debug messages will be written to the servlet engine's log file).
[debug]
serverURL=/forms90/l90servlet/debug
[test]
form=E:\ict\ITSUPPORT\test.fmx usesdi=yes
userid=support/s00001@dshl
width=100%
height=100%
colorscheme=blue
pageTitle=ICT Support :: Just in Time
imagebase=codebase
archive_jini=f90all_jinit.jar,rolloverbutton.jar,getclientinfo.jar,infobutton.jar,test.jar
webUtilArchive=frmwebutil.jar,jacob.jar
baseHTMLjinitiator=webutiljini.htm
#lookAndFeel=Oracle
splashscreen=ash.gif
logo=none
separateFrame=false
******************************************** registry.dat
---=========================
# This is the Registry file.
# This file contains the logical [Java] Class name and an associated
# [numerical] identifier that will be used to refer to objects of the
# class in order to reduce the amount of information that needs to be
# repeatedly transmitted to the client.
# This file is of the Form understood by java.util.Properties (for now)
# The System Level sound file is relative to the CODEBASE
oracle.classById.1=oracle.forms.engine.Runform
oracle.classById.4=oracle.forms.handler.FormWindow
oracle.classById.5=oracle.forms.handler.AlertDialog
oracle.classById.6=oracle.forms.handler.DisplayList
oracle.classById.7=oracle.forms.handler.LogonDialog
oracle.classById.8=oracle.forms.handler.DisplayErrorDialog
oracle.classById.9=oracle.forms.handler.ListValuesDialog
oracle.classById.10=oracle.forms.handler.EditorDialog
oracle.classById.11=oracle.forms.handler.HelpDialog
oracle.classById.12=oracle.forms.handler.FormStatusBar
oracle.classById.13=oracle.forms.handler.MenuInfo
# oracle.classById.14=UNUSED
oracle.classById.15=oracle.forms.handler.ApplicationTimer
oracle.classById.16=oracle.forms.handler.MenuParametersDialog
oracle.classById.17=oracle.forms.handler.PromptListItem
oracle.classById.18=oracle.forms.handler.CancelQueryDialog
oracle.classById.257=oracle.forms.handler.TextFieldItem
oracle.classById.258=oracle.forms.handler.TextAreaItem
oracle.classById.259=oracle.forms.handler.FormCanvas
oracle.classById.261=oracle.forms.handler.ButtonItem
oracle.classById.262=oracle.forms.handler.CheckboxItem
oracle.classById.263=oracle.forms.handler.PopListItem
oracle.classById.264=oracle.forms.handler.TListItem
oracle.classById.265=oracle.forms.handler.CfmVBX
oracle.classById.266=oracle.forms.handler.CfmOLE
oracle.classById.267=oracle.forms.handler.RadioButtonItem
oracle.classById.268=oracle.forms.handler.ImageItem
oracle.classById.269=oracle.forms.handler.IconicButtonItem
oracle.classById.270=oracle.forms.handler.BlockScroller
oracle.classById.271=oracle.forms.handler.JavaContainer
oracle.classById.272=oracle.forms.handler.TabControl
oracle.classById.273=oracle.forms.handler.ComboBoxItem
oracle.classById.274=oracle.forms.handler.TreeItem
oracle.classById.281=oracle.forms.handler.PopupHelpItem
# Defaults for the Font details, all names are Java Font names. Each of
# these parameters represents the default property to use when none is
# specified.
# defaultFontname represents the default Java fontName.
# defaultSize represents the default fontSize. Note that the size is
# multiplied by 100 (e.g. a 10pt font has a size of 1000).
# defaultStyle represents the default fontStyle, PLAIN or ITALIC.
# defaultWeight represents the default fontWeight, PLAIN or BOLD.
default.fontMap.defaultFontname=Dialog
default.fontMap.defaultSize=900
default.fontMap.defaultStyle=PLAIN
default.fontMap.defaultWeight=PLAIN
# Default Font Face mapping.
# appFontname represents a comma delimited list of Application Font Names.
# javaFontname represents a comma delimited list of Java Font Names.
# The number of entries in the appFontname list should match the number in
# the javaFontname list. The elements of the list are comma separated and
# all characters are taken literally, leading and trailing spaces are
# stripped from Face names.
# Note that this file uses the Java 1.1 Font names in order to be able to
# handle the NLS Plane (BUG #431051)
default.fontMap.appFontnames=Courier New,Courier,courier,System,Terminal,Fixed,Fixedsys,Times,Times New Roman,MS Sans Serif,Arial, Kunstler Script
default.fontMap.javaFontnames=MonoSpaced,MonoSpaced,MonoSpaced,Dialog,MonoSpaced,Dialog,Dialog,Serif,Serif,Dialog,SansSerif, Kunstler Script
# The Application Level icon files are relative to the DOCUMENTBASE
# example: icons/
# or an absolute URL.
# example: http://www.forms.net/~luser/d2k_project/
default.icons.iconpath=
default.icons.iconextension=gif
# Application level settings to control UI features
app.ui.lovButtons=true
app.ui.requiredFieldVA=false
# The background color is specified as an RGB triple.
app.ui.requiredFieldVABGColor=255,0,0
---====================================
I tried many times. But could not be successful. Then I just kept my icons in
\forms90\java directory without making jar. In my form, icon file name is the icon name without extension. Here, i can see my icon in button. but if i replace an icon
without changing the name of the icon, then i always see the old icon. The new icon, i can not see.
Please, help me with only Oracle 10g AS how i can see icon in button. Let's assume, there is not oracle 10g DS (any development tool) in the machine where the form is run.
Please, guide me clearly step by step so that i might be successful.
Thanks.
TKARIMThanks Bernard,
It works fine with JInitiator but not working with
the JPI. For JPI what settings I need to do ??hi TKARIM and Bernard, i am having similar problem even with the Bernard's recommended setup. could you post the webutiljini.htm (i presume you are using config=test) ?
i am actually using jinitiator 1.3.1.28 with Oracle HTTP Server of OAS 10gR2) calling Forms Server 6i (f60cgi). After setting up according to Bernard's recommended setup steps, the java console showed that it loaded the icon jar file when it could not read the form, but it skipped the loading of the icon jar file once it read and started the form. How do we specify in the form to pick up the icon from the jar file instead from a directory ? Or do we need to specify ? Any ideas ?
Thx and Regards
dkklau -
Error on calling a BDC from web dynpro while it runs fine through FM.
I have created a function module for calling transaction ima2n using a BDC. This function module runs as intended, if function module is executed using SE37. if I call the same function module from ABAP dynpro view, on some event. I get the below error. I have debugged the function module but it runs fine. If i debug function module and run the BDC in mode "A" then i can see that BDC is performing the intended actions. This is a strange behaviour.. Please help.
ABAP Dynpro Error
Error when processing your request
What has happened?
The URL http://dev.corp.bharatpetroleum.com:8000/sap/bc/webdynpro/sap/zcapex_appln/ was not called due to an error.
Note
The following error text was processed in the system D01 : Exception condition "CREATE_ERROR" raised.
The error occurred on the application server dev_D01_00 and in the work process 0 .
The termination type was: RABAX_STATE
The ABAP call stack was:
Function: TREEV_CREATE_COLUMN_TREE of program SAPLCNT4
Form: TVAR_INIT of program SAPLAIA1
Module: INIT_VARIANTEN_TREE of program SAPLAIA1
What can I do?
If the termination type was RABAX_STATE, then you can find more information on the cause of the termination in the system D01 in transaction ST22.
If the termination type was ABORT_MESSAGE_STATE, then you can find more information on the cause of the termination on the application server dev_D01_00 in transaction SM21.
If the termination type was ERROR_MESSAGE_STATE, then you can search for more information in the trace file for the work process 0 in transaction ST11 on the application server dev_D01_00 . In some situations, you may also need to analyze the trace files of other work processes.
If you do not yet have a user ID, contact your system administrator.
Error code: ICF-IE-http -c: 100 -u: TESTAUTH32 -l: E -s: D01 -i: dev_D01_00 -w: 0 -d: 20111109 -t: 123625 -v: RABAX_STATE -e: RAISE_EXCEPTION
HTTP 500 - Internal Server Error
Your SAP Internet Communication Framework Team
ST22 Dump screen
User and Transaction
Client.............. 100
User................ "TESTAUTH32"
Language Key........ "E"
Transaction......... "IMA2N "
Transactions ID..... "4EB9F7AE3E2403D7E10000000A481584"
Program............. "SAPLCNT4"
Screen.............. "SAPLAIA1 0306"
Screen Line......... 5
Information on Caller ofr "HTTP" Connection:
Plug-in Type.......... "HTTP"
Caller IP............. "10.72.46.106"
Caller Port........... 8000
Universal Resource Id. "/sap/bc/webdynpro/sap/zcapex_appln/"
Information on where terminated
Termination occurred in the ABAP program "SAPLC
"TREEV_CREATE_COLUMN_TREE".
The main program was "SAPLAIA1 ".
In the source code you have the termination poi
of the (Include) program "LCNT4U74".
Error occurred during batch input processing
Source Code :
CONTAINER
CHANGING
HANDLE
TREE_CONTROL_NOT_EXISTING
FAILED
CREATE_ERROR
CNTL_SYSTEM_ERROR.
IF NOT TREE_CONTROL_NOT_EXISTING IS INITIAL
RAISE TREE_CONTROL_NOT_EXISTING.
ELSEIF NOT FAILED IS INITIAL.
RAISE FAILED.
ELSEIF NOT CREATE_ERROR IS INITIAL.
-->>>>>>>>>RAISE CREATE_ERROR. " failed on this line
ELSEIF NOT CNTL_SYSTEM_ERROR IS INITIAL.
RAISE CNTL_SYSTEM_ERROR.
ENDIF.
regards,
Parag AgrawalHi,
as BDC is calling screens and in Webdynpro ABAP you cannot use SAP GUI sceeen, you are getting short dump.
Refer CNTL_SYSTEM_ERROR in webservices from r/3 system
Thanks,
Chandra -
Program runs fine then takes a long time to close
Hi Everyone,
I have written a mid sized application, which is running fine until it comes to closing, then it takes an age to close. If it has only been running for a short time it closes fine, but after some time running it takes longer and longer to close. Until you try to close, it remains fully responsive and performing well.
I have heard the phrase 'memory leak' banded around, but am not 100% sure how I would have created one of these. I am also looking into my queues accidentally getting too big.
If you had this a problem like this, where would you look first?
I could do with some advice around common places that this kind of thing happens.
I don't really want to post my whole application on here, but it includes:
Multiple loop event based producer consumer
Camera acquisisition and image processing
DAQ for some simple digital I/O
Reading and writing to text and image files
Error handling
Compiled as an executable
No local variable abuse
Any advice would be appreciated.
Thanks.Any building of arrays? If those get large, the application can start to get sluggish.
P@Anand is probably on the right track. Make sure you check your closing operations and make sure a loop isn't left sitting there for a long time.
I have also seen file handling take a lot of time to delete temporary files or close large files.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines -
Why WINDOWS 8.1 won't install/load on PC where WIN 8 runs Fine ?
Why WINDOWS 8.1 won't install/load on PC where WIN 8 runs Fine ?
As far as System Requirements go, they are the same for WIN 8 and WIN 8.1
Sympton:
Windows 8.1 Installation DVD loads for some time, no circle of dots, then PC reboots
with quick flash of six lines or so of white text (on black backgound) @ 106 seconds
Needed to use Smart Phone video camera to capture
Your PC needs to restart.
Please hold down the power button ...
Error Code:0x000000C4
Parameters:
0x000...91
0x000... F
0xFFFFF800699C5A80
0x00000000000000000
0x00000000000000001
Presumably message is intended for frozen PC, hence 'hold down power button'
In this case it flashes and re-boots
Windows 8.1 Image loads quickly, flash and reboots PC, having corrupted boot entry
(thankfully not other entries in Boot Manager situated on Dell System Reserved Partition)
PC Desktops affected:
Dimension 5000 - shipped JAN'05
RAM 4GB
Intel Pentium 4 640 3.20Ghz 64bit NX enabled
ATI Radeon HD 6450
Dimension 5150c/XPS 200 -shipped MAR'05
RAM 3GB
Intel Pentium D 820 2.80Ghz 64bit NX enabled
Intel 82945G WDDM 1.0
Both the above PC's Install and run Windows 8 without a hiccup
Another 'ancient' machine, but unaffected:
Precision 490 Desktop - shipped OCT'07
RAM 4GB
2 x XEON 5365 3.0Ghz
ATI HD 6450 (Now HD 7750)
All 8.0 & 8.1 clean Installs and Upgrades on this platform had no problems
Hope some of you can throw some light on this. What does WIN 8.1 do in the boot
process that WIN 8 does not?
And if anybody has encounterd this before...
Note to multi booters - keep or reinstall Dell or other System Reserved partition (PRI,Active)
EasyBCD/Windows Boot Manager held on this partition (eg. 350MB)
If it gets corrupted, you can Restore it, rather than Gigabytes of 1st Primary O/S
Also, it will solve a lot of problems, when manipulating/adding/backing up/restoring O/S's
That's it, happy computing...
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TBFellow user from St. Louis, Missouri pointed in the right direction. I'm grateful
Thanks for pointing me in the right direction. Running upgrade assistant (going to Store rejects CPU, but no details)
Results in:
X You can't install Windows 8.1 because your processor doesn't support LAHF/SAHF.
X You can't install Windows 8.1 because your processor doesn't support PrefetchW.
There are at least three Processor requirements that M'soft does not list for WIN 8.1
and it's fairly well documented, if you ask the right question, eg.:
http://www.pcworld.com/article/2058683/new-windows-8-1-requirements-strand-some-users-on-windows-8.html
So that's it, exclusion by 'stealth' - at least M'soft told you that processor required NX - Execute Disable Bit
for Windows 8
For Intel units, look out for 'VT-x. Have a processor on the way, but will Motherboard pass CMPXCHG16b test?
AND PrefetchW AND LAHF/SAHF
Windows 8 support ends 2015, that means people who bought it will have had 2 years use
WIN 8.1 Upgrade/Update (sic) is free, but costly if it won't run on your machine
So, those many people who decried Windows 8 and stuck to WIN 7, were right after all
Early supporters of WIN 8, have been 'betrayed'
'Minimum Requirement for Processor 1Ghz - don't make me laugh! (Presumably for Phone 8)
M'soft have a 'more info' link on System Requirements page, so why not spell it out...
Otherwise it looks like a PR/Cosmetic exersize
Not helpful
Dell Precision 490 Desktop Intel XEON X5365 (Quadcore) x 2 Chipset X5000 321x/3221ESB Southbridge AMD Radeon HD7750 HDD ST3000DM001 3TB HDD ST2000DM001 2TB SSD OCZ Vertex 3 120GB SSD OCZ Vector3 128GB x2 RAID 0 Offline WD10EALX 1TB Barracuda 7200.10 250GB
USB 3.0 WD MyBook 1230 3TB USB 3.0 WD MyBook 1130 2TB -
keep getting error message saying ipod detected but could not be identified properly - I have tried all the steps on the support page twice and it still will not work! I am running windows 8 (which it has worked with ok before) - struggling
I recently bought some new albums and can't play them on my ipodI just encountered the same problem on my 2 month old MBPro. I found a work around by changing USB ports. As for the actual cause or the reason why that worked, I dont know. The USB port I was using works fine with my phone or other USB devices.
-
Dreamweaver fails to launch, but other CC apps run fine
I've been subscribed to Creative Cloud for over a year. I'm running 10.9.2 on a MacBook Pro. Just today I tried to launch DW and its icon bounced a handful of times and then disappeared. I uninstalled DW and then re-installed it, but got the same result. Other CC apps run fine (Muse, InDesign, PhotoShop, Audition), so I'm not sure what to try next.
I don't "live" in these apps everyday and may launch soem of them once or twice a month. It's possible I've not launched DW since upgrading to Mavericks two months ago. Does DW have trouble running in 10.9?
I am signed in through the CC Application Manager and everything with my account seems to be fine. Any ideas about what to try next?
Thanks for any advice!It was difficult to find specific information about this, especially as it would seem to be a widespread Mavericks problem. I posted here because I initially thought the problem might have to do with Creative Cloud's authentication process.
It turns out that Dreamweaver CC has some Java SE 6 runtime dependencies, but Mavericks comes with Java 7. I'm not sure why this hasn't been remedied by Adobe by now. Apparently some Mavericks users had been prompted by DW upon launch to install Java 6—which could explain why the problem hasn't shown up more on the forums as it was quickly remedied—but my copy never got that far. I did have some trouble tracking down where to download Java 6 for Mac, as it's not on Oracle's site, but found it here: http://support.apple.com/kb/DL1572?viewlocale=en_US&locale=en_US
After uninstalling DW (again!) and installing Java 6, I re-installed DW and it opened.
The other suggestions about given had to do with older CS6 apps not working and weren't helpful to my specific problem.
I'm posting this in case any other user has experienced the same problem in the same way. -
Import.py runs fine locally, but fails on the remote server
I have the following import.py file (from The Definitive Guide to SOA Oracle Service Bus), which I am calling from an ANT script. It runs fine when I include the parameters for the server running on my machine, but when I change the params to our test server, it connects to the server, but can't create a session. I will include the output of both runs as well. The test server runs on a cluster. Does that make a difference?
LOCAL OUTPUT:
Buildfile: C:\Dev\bea\ALSB\crash_alsb\build.xml
local.import:
[echo] importscript: import.py
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
[java] Loading Deployment config from : local.import.properties
[java] Connecting to t3://localhost:7001 with userid weblogic ...
[java] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'alsb_domain'.
[java] Warning: An insecure protocol was used to connect to the
[java] server. To ensure on-the-wire security, the SSL port or
[java] Admin port should be used instead.
[java] Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
[java] For more help, use help(domainRuntime)
[java] Attempting to import : crash-alsb-20090205.jar on ALSB Admin Server listening on : t3://localhost:7001
[java] Read file crash-alsb-20090205.jar
[java] Created session name SessionScript1236884174250
[java] finding service...
[java] creating session...
[java] return SessionMBean...
[java] SessionMBean started session
[java] ALSBConfiguration MBean found [MBeanServerInvocationHandler]com.bea:Name=ALSBConfiguration.SessionScript1236884174250,Type=com.bea.wli.sb.management.configuration.ALSBConfigurationMBean
[java] Jar Uploaded
[java] ALSB project crash_alsb will get overlaid
[java] Default importPlan
[java] Update Archive crash_alsb/crash-alsb-20090205
[java] Update Archive crash_alsb/crash-config
[java] Update WSDL crash_alsb/resources/wsdls/crash-jxdm-20070731
[java] Update BusinessService crash_alsb/business/crash-20090305
[java] Update ProxyService crash_alsb/proxy/crash-jxdm-20090305
[java] Update Archive crash_alsb/export
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 22900920>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 23950494>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 16994189>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 6011310>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 33251361>
[java] got a ref TypeId of <method com.bea.wli.config.Ref.getTypeId of com.bea.wli.config.Ref instance at 6566192>
[java] Modified importPlan
[java] Update Archive crash_alsb/crash-alsb-20090205
[java] Update Archive crash_alsb/crash-config
[java] Update WSDL crash_alsb/resources/wsdls/crash-jxdm-20070731
[java] Update BusinessService crash_alsb/business/crash-20090305
[java] Update ProxyService crash_alsb/proxy/crash-jxdm-20090305
[java] Update Archive crash_alsb/export
[java] Deployment of : crash-alsb-20090205.jar successful
BUILD SUCCESSFUL
Total time: 8 seconds
TEST SERVER OUTPUT:
Buildfile: C:\Dev\bea\ALSB\crash_alsb\build.xml
remote.import:
[echo] importscript: import.py
[java] Initializing WebLogic Scripting Tool (WLST) ...
[java] Welcome to WebLogic Server Administration Scripting Shell
[java] Type help() for help on available commands
[java] Loading Deployment config from : remote.import.properties
[java] Connecting to http://<IP removed>:7001 with userid <userid removed> ...
[java] Successfully connected to Admin Server 'AdminServer' that belongs to domain 'WL-DEV'.
[java] Warning: An insecure protocol was used to connect to the
[java] server. To ensure on-the-wire security, the SSL port or
[java] Admin port should be used instead.
[java] Location changed to domainRuntime tree. This is a read-only tree with DomainMBean as the root.
[java] For more help, use help(domainRuntime)
[java] Attempting to import : crash-alsb-20090205.jar on ALSB Admin Server listening on : http://<IP removed>:7001
[java] Read file crash-alsb-20090205.jar
[java] Created session name SessionScript1236884107843
[java] finding service...
[java] null returned from findService method.
[java] creating session...
[java] Unexpected error: exceptions.AttributeError
[java] Unexpected error: exceptions.AttributeError
[java] No stack trace available.
[java] Problem invoking WLST - Traceback (innermost last):
[java] File "C:\Dev\bea\ALSB\crash_alsb\import.py", line 212, in ?
[java] File "C:\Dev\bea\ALSB\crash_alsb\import.py", line 130, in importToALSBDomain
[java] File "C:\Dev\bea\ALSB\crash_alsb\import.py", line 197, in getSessionMBean
[java] AttributeError: 'None' object has no attribute 'createSession'
[java] Java Result: 1
BUILD SUCCESSFUL
Total time: 14 seconds
import.py
from java.util import HashMap
from java.util import HashSet
from java.util import ArrayList
from java.io import FileInputStream
#from com.bea.wli.config import TypeIds
from com.bea.wli.sb.util import Refs
from com.bea.wli.config.customization import Customization
from com.bea.wli.sb.management.importexport import ALSBImportOperation
from com.bea.wli.sb.management.configuration import SessionManagementMBean
from com.bea.wli.sb.management.configuration import ALSBConfigurationMBean
import sys
#=======================================================================================
# Entry function to deploy project configuration and resources
# into a ALSB domain
#=======================================================================================
def importToALSBDomain(importConfigFile):
try:
SessionMBean = None
print 'Loading Deployment config from :', importConfigFile
exportConfigProp = loadProps(importConfigFile)
adminUrl = exportConfigProp.get("adminUrl")
importUser = exportConfigProp.get("importUser")
importPassword = exportConfigProp.get("importPassword")
importJar = exportConfigProp.get("importJar")
customFile = exportConfigProp.get("customizationFile")
passphrase = exportConfigProp.get("passphrase")
project = exportConfigProp.get("project")
connectToServer(importUser, importPassword, adminUrl)
print 'Attempting to import :', importJar, "on ALSB Admin Server listening on :", adminUrl
theBytes = readBinaryFile(importJar)
print 'Read file', importJar
sessionName = createSessionName()
print 'Created session name ', sessionName
SessionMBean = getSessionMBean(sessionName)
print 'SessionMBean started session'
ALSBConfigurationMBean = findService(String("ALSBConfiguration.").concat(sessionName), "com.bea.wli.sb.management.configuration.ALSBConfigurationMBean")
print "ALSBConfiguration MBean found", ALSBConfigurationMBean
ALSBConfigurationMBean.uploadJarFile(theBytes)
print 'Jar Uploaded'
if project == None:
print 'No project specified, additive deployment performed'
importResult = ALSBConfigurationMBean.importUploaded(None, false, true, passphrase)
SessionMBean.commitSession(sessionName)
else:
print 'ALSB project', project, 'will get overlaid'
alsbJarInfo = ALSBConfigurationMBean.getImportJarInfo()
alsbImportPlan = alsbJarInfo.getDefaultImportPlan()
alsbImportPlan.setPassphrase(passphrase)
operationMap=HashMap()
operationMap = alsbImportPlan.getOperations()
print
print 'Default importPlan'
printOpMap(operationMap)
set = operationMap.entrySet()
alsbImportPlan.setPreserveExistingEnvValues(true)
#boolean
abort = false
#list of created ref
createdRef = ArrayList()
for entry in set:
ref = entry.getKey()
op = entry.getValue()
#set different logic based on the resource type
type = ref.getTypeId
print 'got a ref TypeId of ', type
if type == Refs.SERVICE_ACCOUNT_TYPE or type == Refs.SERVICE_PROVIDER_TYPE:
if op.getOperation() == ALSBImportOperation.Operation.Create:
print 'Unable to import a service account or a service provider on a target system', ref
abort = true
elif op.getOperation() == ALSBImportOperation.Operation.Create:
#keep the list of created resources
createdRef.add(ref)
if abort == true :
print 'This jar must be imported manually to resolve the service account and service provider dependencies'
SessionMBean.discardSession(sessionName)
raise
print
print 'Modified importPlan'
printOpMap(operationMap)
importResult = ALSBConfigurationMBean.importUploaded(alsbImportPlan)
printDiagMap(importResult.getImportDiagnostics())
if importResult.getFailed().isEmpty() == false:
print 'One or more resources could not be imported properly'
raise
#customize if a customization file is specified
#affects only the created resources
if customFile != None :
print 'Loading customization File', customFile
print 'Customization applied to the created resources only', createdRef
iStream = FileInputStream(customFile)
customizationList = Customization.fromXML(iStream)
filteredCustomizationList = ArrayList()
setRef = HashSet(createdRef)
# apply a filter to all the customizations to narrow the target to the created resources
for customization in customizationList:
print customization
newcustomization = customization.clone(setRef)
filteredCustomizationList.add(newcustomization)
ALSBConfigurationMBean.customize(filteredCustomizationList)
#SessionMBean.commitSession(sessionName)
SessionMBean.activateSession(sessionName,"active session from import.py")
print "Deployment of : " + importJar + " successful"
except:
print "Unexpected error:", sys.exc_info()[0]
if SessionMBean != None:
SessionMBean.discardSession(sessionName)
raise
#=======================================================================================
# Utility function to print the list of operations
#=======================================================================================
def printOpMap(map):
set = map.entrySet()
for entry in set:
op = entry.getValue()
print op.getOperation(),
ref = entry.getKey()
print ref
print
#=======================================================================================
# Utility function to print the diagnostics
#=======================================================================================
def printDiagMap(map):
set = map.entrySet()
for entry in set:
diag = entry.getValue().toString()
print diag
print
#=======================================================================================
# Utility function to load properties from a config file
#=======================================================================================
def loadProps(configPropFile):
propInputStream = FileInputStream(configPropFile)
configProps = Properties()
configProps.load(propInputStream)
return configProps
#=======================================================================================
# Connect to the Admin Server
#=======================================================================================
def connectToServer(username, password, url):
connect(username, password, url)
domainRuntime()
#=======================================================================================
# Utility function to read a binary file
#=======================================================================================
def readBinaryFile(fileName):
file = open(fileName, 'rb')
bytes = file.read()
return bytes
#=======================================================================================
# Utility function to create an arbitrary session name
#=======================================================================================
def createSessionName():
sessionName = String("SessionScript"+Long(System.currentTimeMillis()).toString())
return sessionName
#=======================================================================================
# Utility function to load a session MBeans
#=======================================================================================
def getSessionMBean(sessionName):
#SessionMBean = findService("Session","com.bea.wli.config.mbeans.SessionMBean")
print "finding service..."
SessionMBean = findService(SessionManagementMBean.NAME,SessionManagementMBean.TYPE)
if SessionMBean == None:
print "null returned from findService method."
print "creating session..."
SessionMBean.createSession(sessionName)
print "return SessionMBean..."
return SessionMBean
# IMPORT script init
try:
# import the service bus configuration
# argv[1] is the export config properties file
importToALSBDomain(sys.argv[1])
except:
print "Unexpected error: ", sys.exc_info()[0]
dumpStack()
raiseYour Template code is messed up.
Use the code validation tools below and fix reported errors.
Code Validation Tools
CSS - http://jigsaw.w3.org/css-validator/
HTML - http://validator.w3.org/
Then post your Revised Template.dwt code. Once the editable regions are positioned properly, your child pages should perform better.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb -
Hi All,
In WebLogic server when we checked the health status through monitoring tab. Initially ,we find the Analytic provider services and Essbase Administrative services were UNKNOWN.
we tried restarting the specific services (stopped and started the "Stop Analytic Provider services(Oracle Weblogic 10)" ,"Stop Essbase Administration services (Oracle Weblogic 10)" ).it has no effect still the status remains same as "UNKNOWN". But the services are running fine and the EAS console also working fine.After that,we restarted the weblogic hosting server. Now the status changed as "SHUTDOWN". Now also the services are running fine and the EAS console also working fine. How to make the health status of both the services to be RUNNING and why it is showing like this eventhough the services are working fine.?
We have gone through the Oracle Document ID:1563358 which we felt relevant to this. Please guide through whether to apply patches. Our weblogic server version is 10.3.6.0.Hi,
Patches in this document Doc ID 1563358.1 belongs to weblogic versions from 10.3.4 to 12.1.1 so is it your weblogic version is within this range?
Kindly check your weblogic version using below commands.
cd $DOMAIN_HOME/bin
. ./setDomainEnv.sh
$ java Weblogic.version
Or for detail
$ java Weblogic.version –verbose
Regards,
Jagx.
Maybe you are looking for
-
Including Tagged Text in a Table of Contents
I would like to include only a few words from a given paragraph in the Table of Contents. For example in the example paragraph, I would like only the term Blather to appear in the TOC "Blather - Blah blah blah blah." Is there a way I can tag "Blather
-
Looking for a script...
To print all open windows in Illustrator CS5 (or illustrator files in a folder) then close the files. Any help would be greatly appreciated. Thanks in advance.
-
Can vmware player be used to create windows pc and mac. Will I need any other software or hardware to do that?(Have Windows and Mac on same computer)
-
Hello, I've got the Nokia E5. Great phone but in the dark, the flashlight on the back is on. The battery is dead in 1 night so i want to put the flashligt off. But i don't now how to do it. I use the space but it doesn't work because the flashlight i
-
Comment lire les fichiers wmv sur mon ipad mini retina
Bonjour. Je reçois des mails avec des fichiers WMV. Comment puis-je les lire? Merci.