Forms 6i Error FRM-18114

Nt 4.0, SP6A
Forms and Reports 6i (installed first, Home0)
Oracle 8i Client for database management
(installed 2nd, Home1)
Home selector selected for Home0
When running web preview I get the following error: FRM-99999: Error 18114 occurred. See the release notes file (relnotes) for information about this error.
Release notes suggestes the following
FRM-18114: FORMS60_JAVADIR not set.
Cause: For Web Preview from the Builder to work the Registry variable
ORMS60_JAVADIR must point to the location
that contains the Forms Java files. This
varable should have been set by the Oracle Installer when Oracle Forms Developer was installed. A typical value for this variable is c:\orant\forms60\java.
Action: Create or update the registry variable on NT, FORMS60_JAVADIR, and set its value to the location that contains the Forms Java files.
I created a registry entry in HKEY_LOCAL_MACHINE, SOFTWARE, HOME0 containing the following: FORMS60_JAVADIR:REG_EXPAND_SZ:C:\Oracle\Dev6i\Forms60\java
The error persists.
Has anyone experiences this problem or have
any ideas. Thanks in advance for help.
null

You may be hitting Bug:1632441, which is fixed in patchset 12. If either form has a When-Window-Deactivated trigger, try disabling that and see if you still have the problem. If not, then as a workaround you may be able to put that logic in a when-form-navigate trigger instead. Or you can programmatically trap the error in an On-Error trigger if you are actually able to navigate out of the form. See the bug for more details.

Similar Messages

Oracle forms 6i error FRM-42401

i have created a master detail module and when trying to run it, it doesn't come with data when clicking on "execute query"
Instead it displays error
"FRM-42401 Performing program trigger ON_CLEAR_DETAILS on form"
can someone pls help to get rid of this error

Try out,
after you compile all again your form:
in WHEN-NEW-FORM-INSTANCE
Go_block('your-MASTER-block');
Execute_query;
and see what happen(I think, your focus go on Detail-block and when you click F8(excute-query) error happen )
Regards .. hope helps

Forms 6i error FRM-41351 Cannot navigate out of current form

Does anybody know why this error occurs?
I have an ordinary Forms 6i module, running in 2-tier (client-server) mode. When I try to do an EXIT_FORM, I get an error:
"FRM-41351: Cannot navigate out of current form"
My form is called from a top-level form, but plenty of other forms are also called in exactly the same way from the top-level form, and none of them causes this error, and I can see no other reason why this form should produce this error.
The Forms 6i help entry for this error is meaningless, and I can find no information about it on the web or on the Oracle TechNet, so any advice would be very welcome!
Thanks,
Chris

You may be hitting Bug:1632441, which is fixed in patchset 12. If either form has a When-Window-Deactivated trigger, try disabling that and see if you still have the problem. If not, then as a workaround you may be able to put that logic in a when-form-navigate trigger instead. Or you can programmatically trap the error in an On-Error trigger if you are actually able to navigate out of the form. See the bug for more details.

Forms 10g: error FRM-92101: There was a failure in the Forms Server during

AS10g (9.0.4.1) on windows 2000 with 2 GB of ram
We have an application with 10 - 15 users. Sometimes,when users exit from forms with the command exit_form, in a randomic way the form hangs with the error FRM-92101: There was a failure in the Forms Server during startup.....
After the users have to close the browser and open another sessione of explorer.
In the same time other users work fine.
The problem happens more then 10 times a day.
Is there a solution ?

I have also run into similar problem.
In my case, this problem has been carried over from Forms 6i to Forms 10g. In forms 6i it wrote an error file in the same folder where *.fmx file was stored.
For 10gAS, look into <ORACLE_HOME midtier>\forms90\trace folder for a file *.trc. Open it up in notepad. It will tell you which trigger was being executed when the form failed.
Put any comment in the PL/SQL of that trigger, recompile the form and the problem will go away.
I usually put something like:
dummy statement for FRM-92101.
I do not know why it works but in my case it has.
Good luck !!!
Would like to know if it works for you.
Suresh

EBS12, Form 10G customized form. Error FRM-40832: Variable Forms_userExits

EBS 12.
Forms 10 G
can i run customized form on my local PC. i have customizied a form which compile successfuly but when i run the form following error come.
FRM-40832: Variable FORMS-USEREXITS not

I understand. That’s you why have been requested to upload the form to the server and run it. If you had any issues in compiling the form, I would not ask you to upload the form. Instead, I would suggest you fix it on your client first.
In brief ..
You cannot run the form on the local machine, and you have to upload it to the server to do so.
You should not upload the form to the server unless it compiles successfully on your client.

R 12.1.1 After Installtion Forms Opening Error FRM-92101

After installation of EBS R 12.1.1 on OEL 4.4 , forms opening failure due to following error.
FRM-92101 : There was a failure in the forms server during startup.This could happen due to invalid configuration , please look into the web-server log file for details.
When i open the application log file for forms.
[oracle@test 04271114]$ cd /appshome/oracle/VIS/inst/apps/VIS_test/logs/ora/10.1.3/j2ee/
[oracle@test j2ee]$ ll
total 12
drwxr-xr-x 3 oracle oinstall 4096 Apr 26 21:03 forms
drwxr-xr-x 3 oracle oinstall 4096 Apr 26 21:03 oacore
drwxr-xr-x 3 oracle oinstall 4096 Apr 26 21:03 oafm
[oracle@test j2ee]$ cd forms/
[oracle@test forms]$ ll
total 4
drwxr-xr-x 2 oracle oinstall 4096 Apr 26 21:03 forms_default_group_1
[oracle@test forms]$ cd forms_default_group_1/
[oracle@test forms_default_group_1]$ ll
total 172
-rw-r--r-- 1 oracle oinstall 20449 Apr 27 11:19 application.log
-rw-r--r-- 1 oracle oinstall    418 Apr 27 11:10 global-application.log
-rw-r--r-- 1 oracle oinstall    194 Apr 27 11:10 jms.log
-rw-r--r-- 1 oracle oinstall   1688 Apr 27 11:10 log.xml
-rw-r--r-- 1 oracle oinstall    194 Apr 27 11:10 rmi.log
-rw-r--r-- 1 oracle oinstall 129772 Apr 27 11:56 server.log
-rw-r--r-- 1 oracle oinstall     82 Apr 27 11:10 system-application.log
[oracle@test forms_default_group_1]$ vi application.log
11/04/26 21:03:23.966 10.1.3.4.0 Started
11/04/26 21:03:26.60 formsweb: FormsServlet init():
    configFileName:     /appshome/oracle/VIS/inst/apps/VIS_test/ora/10.1.2/forms/server/appsweb.cfg
    testMode:           false
11/04/26 21:03:26.74 formsweb: 10.1.3.4.0 Started
11/04/27 10:33:07.324 formsweb: ListenerServlet init()
11/04/27 10:33:08.547 formsweb: Forms session <1> aborted: runtime process failed during startup with errors /appshome/oracle/VIS/apps/tech_st/10.1.2/bin/frmweb: error while loading shared libraries: libXm.so.2: cannot open shared object file: No such file or directory
For the above error resolution i got a doc 1192205.1 which recommend to install rpm openmotif-2.2.3-10.RHEL4.5 Which is already in my OEL 4.4 box.
[oracle@test forms_default_group_1]$ rpm -qa | grep openmoti*
openmotif-2.2.3-10.RHEL4.5
openmotif-devel-2.2.3-10.RHEL4.5What could be other reason for causing above error?

error while loading shared libraries: libXm.so.2: cannot open shared object file: No such file or directoryPlease make sure you install all OS pre-req. packages.
FRM-92101: Forms Server [ID 1192205.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86 [ID 761564.1]
Oracle E-Business Suite Installation and Upgrade Notes Release 12 (12.1.1) for Linux x86-64 [ID 761566.1]
Thanks,
Hussein

Cannot read image file in oracle 10g forms, getting error frm-47100

I'm unable to read the image from the file location. But If I do re-save via MS-Paint the same image then I'm able to load successfully. I want to load image directly instead of re-save. Error getting like "frm-47100 Cannot read image file".
Need your co-operation to solve this issue.
Thanks in advance!
declare
tiff_image_dir varchar2(80):=('D:\IMAGE\');
photo_filename varchar2(80);
begin
photo_filename:=tiff_image_dir||:IMAGE_NO||'.JPG';
if :image_no is null then
:Image_no :=:UID_NO;
end if;
read_image_file(photo_filename,'JPG','image');
WRITE_IMAGE_FILE('output.tif','TIFF','g_image_info.image',maximize_compression,original_depth)
end;

Hi Sindhu,
By default any operating system file extension starts after the dot. So in this case when it says 2 dots it will think there is something wrong.
RajeshALex

Forms login error for first 2-3 time

Hello,
we have a strange issue , users from Europe region are getting Form connection error(FRM 92050) while they login for the first time of the day,self service page is coming fine then while opening any form it's giving error. after they close the session and try for another 2/3 times they are able to open the forms.
Jinitiator console is not showing any error.
Also FRD trace is not getting generated for the above case of issue.
we have shared appltop architecture with 4 apps tier loadbalanced. if setting 'ICX Forms Launcher' to direct hostname instead of loadbalancer url issue is not coming.but it doesn't prove load balancer has issue as self service pages are coming properly through LB
Any idea how to trouleshoot?
Thanks,
Rishi

Hi,
Please see (Note: 420021.1 - FRM-92050: FAILED TO CONNECT TO THE SERVER /FORMS/FORMSERVLET:-1 WHEN USING LOAD BALANCE) and (Note: 601694.1 - How To Check Session Persistence On BigIP F5 And Cisco Ace Load Balancer Appliances).
Regards,
Hussein

Forms 6i gives FRM-40734 Internal PL/SQL Error after Hourglass for 30 Min

Hi,
I am developing a New custom Form using a copy of Oracle Apps. TEMPLATE.FMB
(Out of two custom forms , I am getting the below issue in only one form and the other is working fine)
Everything works fine but I observed one unique issue during my testing.
I executed the form and entered a value in one column of the master record
(now the record in CHANGED status).
Now I pressed the F11 Key (for Enter-Query in Apps) for doing the
Query by ignoring the entered record values.
Instead of giving a message "Do you want to Save the changes you have made (or)
A Required Field must be entered"
But the Form shows the Hourglass(Busy) for 30 Minutes then gives the error :
FRM-40734 Internal PL/SQL Error
May I know in the above situation, what are the triggers the form will fire and in which sequence (forms 6i)
In summary what form triggers will be fired :
When a NEW record status is CHANGED and when the user invokes Enter-Query
(F11 on Apps and F8 on standalone) , before form changes to Enter-Query mode.
Any pointers to my issue resolution.
Below is my form canvas/block layout and I am getting the issue Only in Master Block and not in any of the detail blocks
MASTER BLOCK
DETAIL1 BLOCK
DETAIL2 BLOCK DETAIL2 BLOCK DETAIL2 BLOCK
thanks,
Shashi

Issue got resolved:
==================
In my case, The solution I found is renaming the Relations with a unique name.
When the Relation is created for two different master blocks
the "Block creation wizard" has given the same name for both
these relations.
I renamed both of them with a custom unique name then the issue got resolved now the form is behaving correctly.
thanks,
Shashi

I get an error FRM-92101:There was a failure in the Forms Server

I get an error FRM-92101:There was a failure in the Forms Server during startup. This could happen due to invalid configuration. Please look into the web-server log file for details, when i open the form
it's a fresh installation for the oracle application 12.1.1 vis on linux redhat 5

Hi;
Please check below note:
FRM-92101: There Was a Failure in the Forms Server During Startup After Fresh R12 Installation [ID 429627.1]
R12 fresh install FORMS DO NOT LAUNCH - FRM-92101/500 [ID 427714.1]
FRM-92101: Forms Server oracle.forms.net.ConnectionException: Forms session <1> failed during startup: no response from runtime process [ID 880088.1]
Also check:
Re: R12 database and JRE Issue
Regard
Helios

Handling oracle forms errors (frm-nnnnn) locally

is there a way to handle an oracle form error (e.g. frm-40508) locally in a way similar to handle oracle database errors.
e.g.
procedure insert_something is
insert_error exception;
pragma exception_init(insert_error,-40508);
begin
:c1.a := 1;
:c1.b := 2;
commit_form;
exception
when insert_error then
<handle insert error on c1 block>;
end;
Edited by: mojo on Oct 7, 2008 4:34 AM

by locally i mean within the pl/sql block that will have raised the error.
an example i encoutnered recently, but by no means the only occasion i have wished such things:
function mseRecStatus returnvarchar2 is
rtnChar varchar2(32);
begin
rtnChar := get_record_property(mouseRec,mouseBlock,status);
return rtnChar;
end;
This is called from a pre-pop-menu trigger. mouseRec and block are calculated previously. A right-click on a record item below the last record raises error frm-40741 (unable to locate record on block). it would be nice to be able to do something like the following without incolving an on-error trigger:
function mseRecStatus returnvarchar2 is
rtnChar varchar2(32);
non_record_clicked exception;
pragma exception_init(non_record_clicked,-40741);
begin
rtnChar := get_record_property(mouseRec,mouseBlock,status);
return rtnChar;
exception
when non_record_clicked then
return null;
end;

CHILD form error FRM-30100: Block must have at least one primary key item.

Hi friends,
I have increased the DML array of the child block from 1 to 10, but it throws me error:
FRM-30100: Block must have at least one primary key item.
Block: CEC_ADJUSTMENT_RECON
Form: CEC_ADJ
FRM-30085: Unable to adjust form for output.
How does a form know that the table does not have primary key? Is it referring to it?
Thanks a lot

I dont understand why do you increase the DML array size..
Because it says in the HELP
Specifies the maximum array size for inserting, updating, and deleting records in the database at one time.
A larger size reduces transaction processing time by reducing network traffic to the database, but requires more memory. The optimal size is the number of records a user modifies in one transaction.
The FRM-30100 comes not because of the above property..
If your query data source type is other than TABLE, it is a must to set at least one database field's PRIMARY KEY ITEM PROPERTY in the block to be a YES.

Error FRM-40012 Form was created by a new version of Oracle Forms.

Hi,
I install my db, AS and Developer Suite in the same machine. When I run the forms by Developer, it keep complaining report server unaccessable. Someone told me to run it by AS. When I try, the error FRM-40012 prompts out. I check the version of Form is 10.2.1.0.2 and the Forms Services Version is 9.0.4.0.19 which is the only available version in Oracle web site.
Can anybody tell me how to do to solve the problem? Thanks.
Rgds

To say things a little clearer, don't develop with Forms 10 and deply on Forms 9. If you want to develop on Forms 9.0.4 & deploy on 9.0.4, that will work.
Also, 10gR1 (which includes Forms 9.0.4) is going to be desupported at the end of this year. 10.1.2.0.2 is a good place to be right now.
So, the best answer is to keep developing in Forms 10 & get the Forms 10 in AS 10gR2 Forms & Reports Services which is available for download on OTN at: http://www.oracle.com/technology/software/products/ias/htdocs/101202.html
Be sure to look for Forms & Reports Services Standalone. It is a one disk download for most platforms.
Cordially,
Steve

Forms ERROR - FRM-18107: Failed to load the DE context for the module

I have recently installed Oracle 10g (10.2.0) which is up and running fine (WinXP).
I then installed Developer Suite 10g (10.1.2.0.2).
When I try to open Forms I get the following error;
'FRM-18107: Falied to load the DE context for the module'
I have;
DRIVE:oracle/product/10.2.0/oradb
DRIVE:oracle/product/10.2.0/devsuite
Can anyone advise?
Many thanks in advance.

Hello All,
I would like to know more about the FRM-18107 error. I have tried getting rid of the error by altering my windows environment variable ORACLE_HOME, and going through numerous websites. But still no luck. I am about to de-install Forms 10g rel2 using the OUI. But I plan on leaving oracle 10g database on the system. Hope this will not cause any conflict. Also do I need to do anything in the registry after de-installation of forms 10g.Or is there any order of installation, i.e Do i need to install forms 10g before oracle 10g database.
PLs also let me know if i will need to download any pathch for this to be sorted. But I didn't think so because during installation i noticed a few patches were being put to place as part of forms 10g rel2. Does it still needs a patch for it to work and get rid of the FRM-18107 error? If so, what is the name of the patch and how do i apply the patch. Pls let me know. Any comment on this will be well appreciated and valuable.
Thanks.
Cheers
Aj
Edited by: user9925154 on 25-Feb-2010 14:50
Edited by: user9925154 on 25-Feb-2010 14:52
Edited by: user9925154 on 25-Feb-2010 15:08

Get Forms Error FRM-92050 Please Help

I just success install EBS 11.5.10.2 but when I link from my pc client it's show error FRM-92050 cannot connect to form server <myhost:9000> how to resolve this problem also i wondering is Linux can be EBS Client? because I try to use my note book with suse9.3 but it's still look for Jinitiator.exe how to use linux as EBS client please help
Tony

Follow the instructions given in metalink Note id 299187.1
The error may be due to missing patches.
Sam
http://appstech-sam.blogspot.com

Forms 6i Error FRM-18114

Similar Messages

Maybe you are looking for