FORMS - RUN PROBLEM

Hello.
I have deeloper 10g and i am working on my client machine XP SP2.
My problem is when i run a form it works correctly for a while but after i ran some reports on it, it becomes something like locked and i have to close the application from the oracle application server explorer page because on the form nothing becomes available i just see a green page
it gives no error to me.
what can occur this because this is a problem that i am having since yesterday.

If this is only happening on one client machine, then I don't see this as an app server problem, or a problem with the generated PDF. If it happens on another client, then I doubt it is client hardware problem. If it were an app server hardware problem, then I think you would see this problem manifest itself in other cases besides PDFs.
See if you can get this to happen with PDF files generated from other sources (e.g., download some from the Internet) and try opening a closing them repeatedly). If the problem occurs, then I see this as a IE or Acrobat plug-in problem. If IE is hanging, you might want to check the Windows Event Log.
40% is a little low. Maybe you can test if this is PDF size dependent.
Message was edited by:
Mark Roberts

Similar Messages

  • Oracle 10gr2 Master/detail form running very slow when you navigate to the detail record.

    Hi All, I have a master detail  form, running in webserver, when I navigate to the detail block, the form start buffering and buttering for about 2 min. There is a trigger when-new-record instance that is firing when you navigate to  a new record : The select part of this stament is taken a long time to execute. I modified this in toad and what used to take 25 seconds to run is taken less than a second now, but the slowness still persists in the form.
    for rec in (select wrrh_col
                      wpbh_col_lvd,
                       wpbh_col_doc_no
          from wh_col,
               wkpl_col,
               wh_col
         where wrrh_col_no = :block.wreh_wrrh_col_no
           and wrrh_col_no = wreh_wrrh_col_no
             and wrrh_col_no = wpbh_col_no
           and wrrh_col_proj    = wpbh_col_proj
           and wrrh_proj_no     = wpbh_proj_no) loop
       if fun_name(rec.wpbh_col_lvd) = 'Y' then                      
        do something,
       end if;
      end loop;
    The select staement that used to run for 23 seconds is running in less than one second, but the form is still running very slow when I navigate to the detail record.
    Please advise.
    Thanks.

    Thanks Andrea for your prompt response, the problem is the select statement and like I stated, I tuned the select statement in toad and what normally takes 23 secs is taking less than 1 sec to run. If I comment out the call to the function, it is still slow. The select stament will returned null and it will still be slow. When I comment out the for loop, it run very fast. I dont know what else to do than tuned the select statement.

  • Diabling function key f1..f10 in forms run time

    How to Diable the function keys F1 to F10 in the forms run time,
    Bcoz as we are aware that f7 enter query, f8 execute query,
    f10 accept, So i dont want the users to go thru this functions,
    The main reason is to avoid this is, For List of values we are
    pressing f9 but some users are pressing f10 blindly, so that its getting
    problem, tell me how to disable the f10 function key in form run time.
    Thanks in advance.
    Srinivas.

    Hi, I tried the key_others procedure and added a message too. But it works fine on hitting f10, does not let user commit the form. But it does not go thru the save button as I have a trigger and conditions to check before commiting. Please reply if you can think of a solution. thanks
    Message was edited by:
    nasserhusna

  • Multi Block Form Navigation Problem

    Hiii
    i have got a multi block form the problem that am facing now is that when running the FORM and when am over one of the my canvases then if i tried to press any of :
    (Tab button,Down arrow ) the canvas changes to ANOTHER Datablock ...
    i dont know what is the problem ....
    ANY SUGGESTIONS
    OMD

    Make the datablock you want to show on top as the first block in the object navigator.
    HTH.
    Regards,
    Arun

  • Screen Compatibility issue when form runs.

    my screen Flick and show message The color scheme has been change to window basic when form run in internet explorer in win7.

    Hi,
    Not sure why you are resolving the node (??), also I would not be inclined to include a period in the object name (.), maybe this is why you are resolving the node.
    Also I don't see in the script where you are calling the instanceManager, in order to use the addInstance method.
    Having said that the problem may be in the File > Form Properties > Defaults tab:
    Check that Preserve script changes is set to Automatic.
    Lastly is the form Reader Enabled? It would need to be for users with Reader to save the changes, including new instances of a repeating element.
    Niall

  • 10g FORMS Run in 6i

    Can we Run FORMS which is compilied in 10g and it Run Forms Run time in Oracle 6.0i ???

    Ghulam Yassen wrote:
    Can we Run FORMS which is compilied in 10g and it Run Forms Run time in Oracle 6.0i ???You can not run any upper version forms in lower version. also not open in form builder.

  • Call Oracle Help for Java in Oracle forms running in the web

    Hi, everyone,
    We are developing a web-enabled Oracle database application
    system. Oracle suggested us to use Oracle Help for Java(OHJ) to
    create an online help system for the web environment. We
    successfully created a OHJ program which can be independently.
    But we still have no idea how to call this OHJ program from the
    forms running in the web environment.
    Could anyone help us out?
    Thanks.
    null

    I would like to know if anyone has been able to do this too. Could someone respond if they have successfully gotten this to work?
    Thanks!!

  • FRM-40208: Form running in query-only mode. Cannot change database fields.

    Hi,
    I am using forms 6i where it is calling a form from a menu in query like call_form(,query_only). Now an error is occurring on call of that form ‘FRM-40208: Form running in query-only mode. Cannot change database fields.’ Though this is been handled to give a certain message from on_error message from a package from library.
    Now the issue is that the error keeps on popping even after the ok button is pressed. There are number of records from the table. How can we handle the error. Any suggestion would be really appreciated!!!
    Regards,
    Rajesh

    thanks Gred but i have resolved the issue. it seems that each row was going into query_only mode (program written such a way). therefore the error was showing even after the OK button. handled the issue from ON_ERROR trigger. anyway thanks for your time Gred!

  • FRM-40031 is not a forms run time file

    FRM-40031 is not a forms run time file
    Hello,
    I'm using forms 6i and developed and compiled and ran the form successfully without any errors.
    I registered in Oracle Apps 11.5 but at the time if accessing the form, I'm getting the above error.
    Any help would be highly appreciated. Thanks.

    Hello,
    this is the space
    SQL Developer (Not for general SQL/PLSQL questions)
    Your question most likely belongs to Forms
    so please mark this thread as answered and post agaim in the Forms forum.
    Regards
    Marcus

  • For CF Server 9 developer win 64bit has the same running problems like 32bit, or more

    CFWACK8 reader:
    Better install CF Server stand alone - so no need  Apache? For CF Server 9 developer windows 64bit has the same running  problems like 32bit, or more?
    I have installed  http://www.apachefriends.org/en/xampp-windows.html ..WAMPP, well Mysql  may used by this CF Server 9 developer, although book use Apache Derby  embedded to cf server?
    CFEclipse plugin may installed either in my (separate) Flash Builder 4 or Eclipse Helios, or only to latter?

    CF 9 64-bit will generally be your best choice on a 64-bit platform, unless you specifically require something that's not available in 64-bit, like COM.
    For development, the built-in web server is fine. But if you want to learn how to manage a web server, it's good to install Apache and configure CF to use that.
    You may use any SQL engine for which there are JDBC drivers, including MySQL. Apache Derby is used for demos, etc, because it's bundled with CF. You don't want to use it for real projects, though.
    You can install CF Builder in any modern Eclipse, including Helios or Flash Builder. This is largely a matter of personal preference. I've encountered some features that don't work properly unless you let CF Builder install its own bundled Eclipse, but these are features that I don't use much anyway.
    Dave Watts, CTO, Fig Leaf Software
    http://www.figleaf.com/
    http://training.figleaf.com/

  • Applet running problem in ie 6.0 under Windows XP

    Applet running problem in ie 6.0 under Windows XP
    I have a PC running Iternet Explorer 6.0 running under Windows XP. I have developed an applet using JDK 1.3 which is running fine with applet viewer , but it is not running in ie. I have installed Netscape navigator and Opera 5. the applet is running fine in both of these browsers but somehow it is not running in IE.
    Later on I upgraded my JDK to 1.4. It also displays use Java2 (V1.4.1) for <applet> (requires restart) tck marked in Advance section under Tools-Options menu of IE.
    I have also tried and set various options in my Control Panel�s Java Plug-in but all in vain. I have searched the sites for this solution but no one answers specifically.
    I know it�s a small problem due to discarded JVM in IE under Windows XP but give me solution for that.
    Thanks in Advance
    [email protected]

    Dear I have the same problem .
    Applet running problem in 6.0 . Enen I have installed the latest Jre 1.5.
    What should I do. I am fedup with this problem.

  • Ora-12560 11g Forms Running

    whenever an application/ form run from Form builder,
    i gives an error ora-12560:TNS protocol adapter error
    but then pressing ok button
    brings a logon screen and then form comes to running,
    how to avoid error message ?
    Kindly,

    hi
    u can create a trigger on-logon on the same form and just try with Null;
    and run the form or create a register for u r sid in oracle_home.
    example:
    Local orcl

  • How to launch a local program from a Form running on Web

    How to launch a program in local hard disk, say notepad, from a Form running on web?
    I tried the HOST() function but it will launch notepad on the application server other than the client.
    Thanks,

    You can use the following code from a Pluggable Java Component (PJC) to invoke notepad
    String cmd = "notepad.exe";
    Process p1 = null;
    Runtime rt = Runtime.getRuntime();
    int exitValue;
    try
    p1 = rt.exec(cmd);
    exitValue = p1.exitValue();
    System.out.println("Command returned status : " + exitValue);
    catch (Exception e)
    System.out.println("Error : " + e);
    Of course in reality the command to execute would be sent from the Forms Program as a Set_Custom_Property on the PJC
    Note that the PJC to do this would have to be signed to allow access to run such commands

  • Hiding the address & tool bars of ie while forms running

    hi
    is it possible to hide the tool bar, address bar when the forms running
    (forms 9i). if yes how...? pls help
    kris

    Kris,
    if you launch Forms from another webpage the you can do this with Javascript. You use the Javascript window.open(URL,....) command for this.
    <script>
    var windowHandle;
    function openWindowURL(URLString){
    if (windowHandle == null || windowHandle.closed){     windowHandle = window.open(URLString,"Oracle Forms Services","location=false,toolbar=false,resizable,scrollbars");
    else {
    windowHandle.close();
    windowHandle= window.open(URLString,"OracleFormsServicesSubWindow","location=false,toolbar=false,resizable,scrollbars");
    windowHandle.focus();
    function closeWindow(){
    if (windowHandle && !windowHandle.closed){
    windowHandle.close();
    else{
    <!-- HANDLE THE CASE OF NO WINDOW BEING OPEN -->
    </script>
    Frank

  • URGENT,,Form Run time problem

    Hi all,
    I just wondering whether you can assist me with the problem I have with running a form.
    When I try to Program Run Form, IE page opens and I have this error msg:
    "Bad Gateway
    The following error occurred:
    The IP address was not found during the DNS lookup. Contact your system administrator. (DNS_NO_DATA)
    -------------------------------------------------------------------Please contact the administrator."
    when I start the OC4J instance,
    It only gives me : "Oracle9iAS (9.0.2.0.0) Containers for J2EE
    initialized"
    I am using Window NT and Oracle 9i Database release 2 and Oracle 9i Developer suite Release 2
    I really appreciate if you can give me some assistance especially in setting up the DNS.
    Thanks
    Regards,
    Silva Hiendra

    The problem seems to be with privileges on the machine running Forms. This is what the online doc said about FRM-30087
    Cause: You lack privileges in the specified directory, or you do not have the disk space required.
    Action: Contact your DBA to make sure you have the access privileges you need.
    Hope this helps
    suvarna

Maybe you are looking for