Forms Runtime for different applications

Hello, I am running 3 applications on Windows XP. When I try to use Forms builder to run some of the Forms in these applications it works for only one of the applications the other two applications do not work.
When I run a Form in the other 2 applications using Forms builder I just see a blank window. What could be the reason for this and how should I solve this problem ?
Please let me know
I have checked the entries in the windev_username.env file and I see the path set properly. It shows entries for all three applications.
Thanks

For everyone's benefit, the Forms Builder has nothing to do with actually running a form. The "Run Form" button found in the Builder does nothing more than send a URL to a browser. It is just their for convenience and can just as easily be entered into a browser on your own. Of course, the default settings in the Builder will attempt to generate an FMX prior to calling a browser.
The URL to run a form on the local machine (assuming the listener is local) could look something like this (the exact url will vary depending on your installation):
http://localhost:8889/forms/frmservlet?form=<+SOME FMX NAME+>
A blank screen is usually the result of a misconfigured formsweb.cfg or a missing plug-in (e.g. Jinitiator). Do the following:
1. Ensure that OC4J is running
2. Open a browser and manually enter a URL similar to what I illustrated above. Replace your form name after the equal sign. Attempt to run one of the failing forms.
3. When the page appears to be done loading and is blank, in the browser click on View > Source. Look closely at the resulting html for the Jinitiator (or JRE) version. Verify that you have installed that version.
I assume since you mention a file, which is not Oracle's (windev_username.env), that you have already made some customizations. Look carefully at your changes and be sure that there are no typos or missing variables or parameters.

Similar Messages

  • I seek a java forms builder for desktop applications

    can any body help me find a forms builder for desktop applications using Swing?
    i know Oracle Forms developer, but i think it is restricted to JSP projects only .. isn't it?

    Any IDE with a GUI builder will do. Not that I actually advice to create GUIs (I guess this is what you mean by form) with tools... but if you want to, that's the way. The editor of JBuilder is said to be quite good.

  • Log4J: Different config files for different applications?

    Hi all.
    If you run an application which uses Log4J logging it's enough to place the log4j.xml file in the Classpath.
    But how do you specify which configuration file to use during startup of a Java programm if they need different configurations but have the same classpath?
    Thanks in advance
    Carsten

    my log4j knowledge is a bit outdated - but somewhere in your apps you should have a line that loads the properties file, something like:PropertyConfigurator.configure(path_to_log4j.properties);And the log4j.properties file should be in your app's EAR file somewhere - and since the app server creates a context for each application, I don't think there would be any "bleed over". So, does your setup differ from this somehow?
    Good Luck
    Lee

  • JNDI returns a different class for different applications

    Hello,
    I have a WebSphere server that runs a JNDI service, in which I defined an entry for a ConnectionFactory declared on a remote server. On the server I run an EJB application which connects the JNDI and gets the ConnectionFactory. I also have a stand-alone Java application which gets the ConnectionFactory from the JNDI on the server.
    The problem is that the implementation class for the ConnectionFactory I get is different between the EJB and the stand-alone applications. The stand-alone application recieves a MQXAQueueConnectionFactory, which is just fine because I want to use XA transactions, but the EJB application receives a JMSQueueConnectionFactoryHandle!
    What can be the reason for that? How does the JNDI service determine which implementation class to return?
    (I suppose that is a specific behavior for Websphere...) How can I control that, if at all?
    Thanks!

    I have a similar situation occurring. Was therre any resolution found?

  • Keyword re-directs in a single endeca instance for different application

    Hi all,
    We are maintaining a  single endeca application for 2 different web-sites.Now,we have a requirement to set up keyword -re-directs for both the applications but the re-directs set up in 1 application should not clash with the other.Actually,I tried setting up in 2 differnt groups using dev studio,but I am not seeing any difference in JSP ref application.Ex: I set up a re-direct for word "Shampoo" in both sites but at any time,only 1 re-direct is seen.
    Please advise.
    Regards
    Shreyas

    Hi Shreyas,
    Keyword redirects are global to an index.
    You can try following work arounds,
    Option 1 :- I guess you are using experience manager, in that case, you can create a custom cartridge for the keyword redirects and play around with triggers to makes it application aware. This option is good if you have number of keyword redirects are lesser.
    Option 2 :- With the existing keyword redirects you can do something like below, which is a dirty workaround. see if you can include site name in the user search term . For example say you have site1 and site2 as two sites. So if you are to add a term as google for site1 and not not for site2, then you will add it as "site1 google" with match all or match phrase. from the front end you will have to query twice first time with "google" as search term and second time with "site1 google" as a search term. you should get just keyword redirects from the second query. Additional search query here may not be good for the production environments. Thisld  option should not be used if you have large volume of data or large volumes of the traffic.
    Hope that makes sense!

  • Closing an application has different results for different applications

    Hello,
    what determines if an application quits or just close when you click the red X button? For example when you close Safari, the application stays in the dock as running application even if there are no open windows left. If you close iPhoto, the application quits.
    Any idea? And is there a way to control this?
    Thanks

    If the app can do something with all windows closed, it will stay open when you Close the window. The close button closes windows. The Quit command quits applications. The application developer controls whether or not closing the last document window quits the app.
    An app will stay open as it assumes you may want to start a new document. It costs virtually nothing to keep an app open, but takes some time to open the app and make it ready to create a new document.
    iPhoto has nothing useful to do without the viewer window open, so it quits the app. Same with System Prefs. However, Text Edit, Word, etc. are ready for you to start creating a new document. Mail can receive email with no windows open.

  • How do you create a form that has user permissions per form field for different user?

    I need to create a form that is used by multi people but each user needs to fill out different fields within the form. I need the first user to make selections from a list and save it to send to another (the selection fields then need to be locked). Then the other user checks one of the selections made by the first user and saves the document to send back to the first user. Not sure if this is possible. I would like the first form field selections not to even show as a highlighted field to the other user (like just be more like a text field). I want the document to be able to be used more than once. The list selections will change and need to be sent to the other user at least once a month or more. Has anyone done this?

    There's no built-in way to do that, but it's probably doable using a custom-made script to hide and/or lock the fields.

  • Wave form chart for different sampling rate

    Hi
    All,
    I have to use different sampling rate to get  pressure data. Can I use the waveform chart to monitor the pressure data with time?
    If not, what kind of graph should I use?

    Different sampling rate than what? A chart or graph can be used. Depends mostly on how you want to update it.

  • Multiple "vserver" for different apps in a single VLAN (Bridge Mode)

    Hi,
    I'm deploying Cat6500 with CSM-S & FWSM modules. Doing bridge mode for the CSM (and FWSM will do the inter-VLAN routing upfront).
    There are 3 (three) different applications (Vidiator, BEA & XIAM) placed in the Internet VLAN. Each application consist of multiple servers. Two applications (BEA & XIAM) need to be load-balanced, and the other one (Encoder) in the same VLAN does NOT need to be load-balanced.
    The questions are:
    - Is it possible to create multiple virtual servers (vserver) for different applications (BEA & XIAM) on the same VLAN client/server ?
    - Is it also possible to do Load Balancing only for some Servers (BEA & XIAM) on one VLAN, while other servers (Encoder) on the same VLAN do NOT need load-balance? If, so what is the method? If not, what should be done?
    Below is the script for CSM-S that I'm planning to deploy, please kindly provide your comments and advices.
    Thanks a lot in advance.
    Johan KC
    MY SCRIPT:
    module ContentSwitchingModule 9
    vlan 96 client
    ip address 10.67.96.9 255.255.252.0
    alias 10.67.96.8 255.255.252.0
    vlan 296 server
    ip address 10.67.96.9 255.255.252.0
    vserver BEA-PROXY-WEB
    virtual 10.67.96.1 tcp www
    vlan 96
    server farm BEA-PROXY-SERVERS
    replicate csrp connection
    persistent rebalance
    inservice
    server farm BEA-PROXY-SERVERS
    nat server
    no nat client
    real 10.67.96.2
    inservice
    real 10.67.96.5
    inservice
    probe ICMP
    server farm XIAM-WEB-SERVERS
    nat server
    no nat client
    real 10.67.96.26
    inservice
    real 10.67.96.29
    inservice
    probe ICMP
    vserver XIAM-WEB
    virtual 10.67.96.25 tcp www
    vlan 96
    server farm XIAM-WEB-SERVERS
    replicate csrp connection
    persistent rebalance
    inservice

    Hi Gilles,
    Thanks a lot for your respond.
    1. For the multiple vservers.
    Both applications provide HTTP service but think that I could run them on different port number: 80 and 8080. Will this work?
    2. About the non-loadbalancing apps (encoder).
    There are two servers and future adding is possible. They can work independently of each other. Both servers just provide FTP access, for content provider to upload files.
    Since both servers will run the same service (FTP) and port number, I don't think we can create two vservers for them, right?
    You also said that I could have the server in the internet vlan and client accessing it directly. Is this mean that no vserver config needed? So, from FWSM the client traffic will go straight to the servers (without passing the CSM)?
    If this is possible, sound like good option to me.
    Please kindly provide your advice/comments.
    Thanks again.
    Best Regards,
    Johan KC

  • Different AP/AR Invoice Screen for Different Product

    We have requirement that we want to capture
    1. Different colums settings for different product.
    2. Different UDF's for different product
    We are not able to come up with common screen for AP/AR invoice for those product as it makes screen very complicated with many unnessary column for 1 product.
    is it possible to have different screens for different products?

    Hi Avinash,
    You have go through the form settings for Raw level settings and UDF manage through create different category as per your product specification.
    But As per SAP Standard not possible different form settings for different products in A/P and A/R forms.
    for your requirement possible through SDK but thats not right way.
    Thanks,
    Srujal Patel

  • HCM Processes and Forms : Using single Form Scenario for Multiple Countries

    Hi ,
    I have a requirement to design a HCM P&F form ( Single Process, Single Form Scenario ) to support multiple countries.  Form fields should be visible/invisible based on the country ( derived from the login Manager).  please help me with the following questions.
    1. Is it right way to enable/disable the fields in the same form scenario for multiple countries ( Approx. 20-25 countries)
    2. Is there any limitation to no. of fields on the form? does the form performs well with multiple dynamic conditions?
    3. If yes, what is the best way to do this? through Java Script / Back end Generic Service?
    Thanks in Advance,
    VR.

    Hi VR,
    1. Is it right way to enable/disable the fields in the same form scenario for multiple countries ( Approx. 20-25 countries)
    -You can use same form scenario or process for multiple countries if you are using fields based on international structure HCMT_BSP_PA_XX_R*. If you intend to use country specific fields then you may like to use different form scenario for different countries.
    2. Is there any limitation to no. of fields on the form? does the form performs well with multiple dynamic conditions?
    - As such there is no limiation for the fields.Yes, form performs well with multiple rule configurations.
    3. If yes, what is the best way to do this? through Java Script / Back end Generic Service?
    I interpret you would like to derive & show fields based on same backend logic, in that case you should generic service.
    If you want to show fields based on manager's logon then you should also use authorization BAdi.
    Regards
    Pooja

  • Organize JDev for large applications

    Hello JDev team,
    In order to properly manage very large applications and different versions of the same application (like maintenance and development) in the same environment, there are various settings that would find their more appropriate place at the level of the workspace.
    I already saw some other threads discussing similar topics, I would only like to put them together and try to get some schedules :-)
    1. One problem is that there are no nested workspaces, and you don't have good "visibility" outside your own workspace (one example, you cannot create a BC Client Data Model unless the BC project is in the same workspace).
    Nested workspaces would be great for properly organizing a large application. If you implement this, please don't forget the visibility "details".
    2. A quite different problem is related to the definition of libraries. Once you have to manage in parallel, in the same environment, different versions of the same application, things become hard to manage.
    Most of the projects should have their associated library defined, as there are relations between projects. But a library entry is absolute, so it stands for one version. When you have to switch to another version (which is also under SCM), there are different physical paths on the disk, so different values for the libraries. And you have to change (one by one or directly in libraries.xml) their definitions.
    This would be solved naturally if the libraries were defined for a workspace. And would also provide the possibility to have relative paths rather than absolute ones, which is easier to manage.
    3. Base classes. It is nice to have this in the global Preferences, but, as somebody else noticed before me, it might be necessary sometimes to have different base classes for different applications, all in the same development environment. This comes similar to having base classes defined (also) at the level of the workspace.
    4. Debugger/Breakpoints/Default Action. This is another kind of preference I would like to have at the level of the workspace, or even for each project. Especially because of the "Group of Breakpoints" section.
    5. Deployment. Here, a new option "Relative to Workspace Directory" would do. Or, allow the definition of the default deployment directory for each workspace.
    6. Web Browser/Proxy. Well, here my problem might be more specific. We access internet resources via a proxy, so when it comes to accessing Oracle resources (like Check for Updates...) from JDeveloper, the proxy setting is useful, even required.
    But, in our intranet development, we do not use a proxy (not the same, anyway). So, for normal development purposes, there should be no proxy.
    In this case, what I would like would be to have the global setting in the IDE preferences used for global resources, while the setting in the workspace (if any) will be used for the application-specific resources (e.g. servlet URL).
    I am quite sure I did not cover all the possible enhancement topics, but I hope things will be checked carefully.
    Apart from adding valuable features for developers, the approach of moving certain preferences from the IDE to a "work component" (workspace, project) would also help team-work.
    Once one team member will set some preference(s) for a workspace (and put it under SCM), this setting(s) will be automatically available to all other team members.
    Could you please comment my issues and tell me which of them (with the solutions that you foresee) could integrate 9.0.4?
    Thank you,
    Adrian

    Hi Adrian,
    Thanks for the detailed feedback.
    I agree with you that there are significant issues when using project files at the moment in a team environment, particularly when an SCM system is involved. And since a recent survey indicated that the majority of JDeveloper users use some kind of SCM system, it's particularly important that we address this in future releases.
    At the moment, I'm putting together some suggestions for future changes in this area from the point of view of the feature team who develop SCM support in JDeveloper. Your ideas are useful input into this process. Sadly, it's unlikely that any major changes to the way project files are stored will make it into 9.0.4, since 9.0.4 has already gone into "bugfix only" mode, and the focus of the 9.0.4 release has been on performance improvements and stability. However, we are looking at this issue for a future release (possibly 9.0.5, although these discussions are at a very early stage).
    I've included comments on some of your specific points below.
    1. Nested workspaces
    There was some discussion about whether we should use nested projects a long time ago (i.e. get rid of the concept of a workspace altogether, and just allow projects to contain, and presumably inherit properties from, other projects). This is currently being tracked as ER 2048949. It requires a substantial change to the architecture of JDeveloper and could have a massive effect on components across the IDE. I believe that a lot of the issues with project files can be solved in other ways without going to the extreme of using nested projects / workspaces.
    2. Library Definitions
    Project-scope libraries should hopefully make this a whole lot easier in 9.0.3. I also like the idea of defining libraries at the workspace level so that they can be shared between projects; alternatively, using a "library definition" file as a separate, version-controllable resource that can be referred to by a project. I've filed ER 2689043 to track this.
    3. Base Classes
    This is a BC4J thing, and a bit outside my area of knowledge :) I'll pass your suggestions along.
    4. Debugger Preferences
    I'm not sure what you mean by "group of breakpoints section"
    5. Deployment
    Filed ER 2689052
    6. Web Browser/Proxy
    You might be able to make use of the "Exceptions" field in the proxy settings to help with this. Within Oracle, we have exactly the same issue, but normally use an exception list that looks something like this: "localhost|127.0.0.1|*.oracle.com|*.oraclecorp.com|*.oracleads.com"
    One of the areas I'm interested in seeing improved is the concept of "configurations" that we currently have in project files. For example, it would be nice to define a workspace-scope configuration that's inherited by projects. Also nice would be the ability to allow read-only configurations (that are source controlled as part of the checked in project definition) and user/view-specific configurations (which would not be version controlled). The user/view specific configurations could inherit preferences from the read-only configurations, and the user could override things in a way that wouldn't affect other users (e.g. in the "Paths" preferences, change the output directory to one on their own local machine) without having to check out the project file from source control.
    Thanks,
    Brian
    JDev Team

  • How to display page no for different master pages in one adobe form application

    Hi All,
    we have requirement where we need to  display page nos in different master pages in one single adobe form.
    For the First form the page nos should be displayed pgno of total pages and for 2nd form the page no shuld be displayed as pgno of total pg.
    so please help me with any script or suggestions for displaying the page no accordingly in different master pages. Your suggestions are greatly appreciated.
    Thanks
    Raja.

    Hi Lingaraj,
    We have 2 different Master pages and 2 Body pages. For the seccond Master page the page no are comming correct like 1 of 3 ,2 of 3 and 3 of 3 but for First master page the page no are comming 0 of 3  in all of the page its not displaying the current page no in 1st master page.
    Screen shots are attached for first master page and Hierarchy Node.Pls see the highlighted section in 2nd image.
    Pls see and suggest me accordingly. Hope this helps are let me know anything u require.

  • How to change keyboard map fmrweb.res for different forms

    I'm using Oracle Forms 10g with Oracle Forms and Reports Application server 10g.
    I know how to change fmrweb.res to change how keys function on web forms. The problem I'm having is I only know how to assign the fmrweb.res file when connecting to the application server, which means all forms running on that session have to use the same keyboard mapping.
    I know you can change the defualt fmrweb.res for all the forms executed on the application server
    and you can change the fmrweb.res file in the URL like
    server/forms/frmservlet?Form=login.fmx&config=dataentry
    (where dataentry is defined in the formsweb.cfg file)
    and in the config section I have
    [dataentry]
    term=fullpath/fmrweb_new.res
    My question is, is there a way to pick a different fmrweb.res file based on the form?
    Can you specify multiple forms in the basexxx.htm file(basejini.htm) in the PARAM section like
    <PARAM NAME="serverArgs"
    VALUE="module=form1.fmx term=fillpath/filename1.res"
    VALUE="module=form2.fmx term=fillpath/filename2.res"
    VALUE="module=form3.fmx term=fillpath/filename3.res"
    VALUE="module=form4.fmx term=fillpath/filename4.res">
    Is there a way to pass term=fullpath\filename.res to the Oracle Forms Web Runtime process for each form using call_form, open_form, or new_form?
    Edited by: user537213 on Sep 19, 2008 5:38 PM
    Edited by: user537213 on Sep 19, 2008 6:24 PM

    Posiible approach (i now it sounds strange):
    Configure your enter-key to fire the KEX-EXEQRY-Trigger.
    In the dataentry-form-module: Overwrite the KEY-EXEQRY-Trigger so thtat is just does a NEXT_ITEM; .
    I know there may be other implications depending of the compelixity of your dataentry-form, but maybe this helps.

  • One instance for two different application

    Hello,
    I have to solve following problem..
    need have one instance of object for two different application..fist is standard SE application and second is EE (web)..
    SE application is a server..listen on and accepting connection from mobile phone..and EE application need to show list of connected devices and should say to SE application that new device was connected..
    I would like to do this without database..only server and web app..
    I have thought about RMI..but hope there is more simple solution..
    Thanks a lot for your ideas.
    Dmitrij

    I would like to do this without database..only server and web app..You have your reasons for wanting this to be the case. If you are sure you don't want a DB, then pass the state of the object between the two ends using XML as the transport form. As someone said, you can use JMS or you can write an HTTP POST or probably other transport mechanisms other people will suggest to actually get it over the wire from one side to the other.
    As to your question of how to sync state, just make the object you're sharing final after it's been created (on the side that creates it) and make the reference that receives it and holds it final also, after you've reconstructed it from the XML you received.

Maybe you are looking for