Forum user in a bad state

Strange psychological condition demonstrated by this user :
http://forums.oracle.com/forums/profile.jspa?userID=728005

hoek wrote:
He/she appears to have seen the (programming) light! ;)Yes,
but it seems that the light was blinding enough to cause uncontrollable postings of impressions with oracle , and maybe even pronouncing
"unbreakable oracle" while writing those posts.
I hope user8751564 is ok now.
:)

Similar Messages

How to find the user exits and BADIS from SPRO

Hi all,
please let us know how to find the User exits or BADIS for an application from SPRO.
Regards,
Madhavi

Hi Varisetty,
Finding user exits and BAdis from SPRO can be cumbsersome. In most instances you know the standard SAP program and want to check (find) an exit called in the flow of the transaction. You can do this as follows:
For User Exit:
Put "/h" in the command box (to start debugging)
Execute your transaction
When you enter debugging - put a breakpoint at statement
CALL CUSTOMER-FUNCTION
the control will stop at all calls to User Exits
For BAdi (it's simpler)
Go to class CL_EXITHANDLER in SE24
Enter method GET_INSTANCE
Put a breakpoint in this method
Run your standard transaction - control will stop at all BAdis called within the flow since this method is used to check BAdi implementations before invoking them
Also, if you want to find enhancements by package - go to SE80, enter the package and check function groups starting with X - those contain function exits (conventional user exits). For BAdis in a package, there is normally a separate tree node (under the package) for Enhancements hence clearly identifiable.
Cheers,
Adi

IW31 - User Exit or BADI for modifying Fund

Hi,
Would you know any user exit or BADI in IW31 I Work Order Create) Transaction , to Modify Fund based during creation ?
I am looking for User Exit or BADI that could modift fund with my Logic, During SAVE "or" when ever user clicks on Menu GOTO-> Assignments -> Funds Management "or" when use enetrs Functional Location/ Equipment in main Screen ?
Any Help really appricated. Thanks in Advance.

hi
this is the only exit for iw31..
Transaction Code - IW31 Create Order
Exit Name Description
IWO10012 Maintenance order: Priority handling on central header
To search for a badi, go to se 24 display class cl_exithandler.
double click on method get_instance, get a break point on case statement.
execute and start the required transaction in new session.
look for variable exit_name. It would show the available badi's.
Please do reward if useful
Regards
Swati

Is there any User Exit or BADI- Where LTAP-WDATU is as change parameter ,So during or after Transfer order creation GR date would be as per given logic not as current date

Dear All,
There is a requirement in which when the material (Not batch managed) is getting return from Non WM managed storage location to WM managed storage location than at the time of creating transfer order or after creation of transfer order would like to change LTAP-WDATU (GR date) automatically , So here i am unable to find the right user exit or BADI in which i can write the logic for same. Below is full description of the requirement.
Here we are following Removal strategy "FIFO" while picking the material (Not batch managed) from WM managed storage location (WMS1) & transferring to Non WM managed storage location (ODS) ( than from there it use to go to Production) , at certain times partial quantity use to come back from Non WM managed storage location (ODS) to WM managed storage location (WMS1) and while doing putaway of the same "GR date" use to change which was not the actual when the material 1st time comes to WM managed storage location (WMS1) (before getting transfer to Non WM managed storage location). So here i want the user exit or BADI in which i can write my logic so that GR date ( LTAP-WDATU) would automatically change while creating transfer order or after creation of transfer order as per the "GR date" of same material which last moved from WM managed Storage location (WMS1) to Non WM managed storage location(ODS) because as per FIFO material dated before that would not be exist in the warehouse.
Below is the flow of the material while transferring to production & returning from production.
WMS1 ( WM managed warehouse ) --> ODS ( Non WM managed warehouse) --> Production At the time of issue to production
Production --> ODS ( Non WM managed warehouse) --> WMS1 ( WM managed warehouse ) At the time of return from production
I hope i m clear on my requirement.
Thanks in advance.

1. You have to get a key from SAP to modify the two includes in which the user exits are present.
2. You have to enter statement 'INCLUDE z**. ' in both user exits in the MV45* includes. Then save and activate the MV45** includes.
3. You have to figure out the code that carries out the functionality described in your specifications.
3. Write the code in includes Z** .
4. Now the code written by you will be executed when you run the relevant SD transaction
Message was edited by: Sudhir Bhate

User Exist or BADI to restrict cancellation of Excise Invoice..!!!!!

Hi,
After Creation of Commercial Invoice or MIGO the excise invoice should not be canceled , We are using following doc flow for creation of excise invoice
Delivery - - > Proforma Invoice - - > Excise Invoice - - > Commercial Invoice.
So what should we use ( User Exist or BADI ) to restrict cancellation of Excise Invoice ???
T-code : J1IIN
Ankesh

I think you are very much aware of forum rules and still posting
duplicate threads.
Do you want to be a guest of julius ?

Find User Exit or BADI

Hi all,
When I worked in the version 4.6 I used to use the object v_ext_act, v_ext_imp and the transaction St05 to find a user exit or a badi when I need it. But since I started to work in the version 6.0 it seems that with these objects I can't find anything.
Any of you know if SAP has changed the name of these objects?
Thanks

Hi Raul,
Another approach that you can use in order to find out user-exit or badi in a program or transaction is to start execution of it in debug mode and then put a break-point in following statements:
CALL CUSTOMER-FUNCTION --> to find user-exits.
CALL BADI --> to find BADI's
Then just press F8 and SAP will stop whenever a user-exit or badi is invoked.
Hope this helps.
Cheers.

User exits vs badi

hi all, one of my friends who is working in real time said to me , whenever a need for enhancement arises, its always better to use badi over user exit. he said , if v add our code in BADI , and in future if any problem arises with BADI , SAP wil take care, but same cant be done if v use userexits.
am quite confused.plz give the basic differences about badi and user eixt, and which of the two is preferred in REAL TIME and why?
thanx all.

Hi Shiva,
Difference Between BADI and User Exits
Business Add-Ins are a new SAP enhancement technique based on ABAP Objects. They can be inserted into the SAP System to accommodate user requirements too specific to be included in the standard delivery. Since specific industries often require special functions, SAP allows you to predefine these points in your software.
As with customer exits two different views are available:
In the definition view, an application programmer predefines exit points in a source that allow specific industry sectors, partners, and customers to attach additional software to standard SAP source code without having to modify the original object.
In the implementation view, the users of Business Add-Ins can customize the logic they need or use a standard logic if one is available.
In contrast to customer exits, Business Add-Ins no longer assume a two-level infrastructure (SAP and customer solutions), but instead allow for a multi-level system landscape (SAP, partner, and customer solutions, as well as country versions, industry solutions, and the like). Definitions and implementations of Business Add-Ins can be created at each level within such a system infrastructure.
SAP guarantees the upward compatibility of all Business Add-In interfaces. Release upgrades do not affect enhancement calls from within the standard software nor do they affect the validity of call interfaces. You do not have to register Business Add-Ins in SSCR.
The Business Add-In enhancement technique differentiates between enhancements that can only be implemented once and enhancements that can be used actively by any number of customers at the same time. In addition, Business Add-Ins can be defined according to filter values. This allows you to control add-in implementation and make it dependent on specific criteria (on a specific Country value, for example).
All ABAP sources, screens, GUIs, and table interfaces created using this enhancement technique are defined in a manner that allows customers to include their own enhancements in the standard. A single Business Add-In contains all of the interfaces necessary to implement a specific task.
The actual program code is enhanced using ABAP Objects. In order to better understand the programming techniques behind the Business Add-In enhancement concept, SAP recommends reading the section on ABAP Objects.
What is the system landscape?
1) Difference between BADI and USER-EXIT.
i) BADI's can be used any number of times, where as USER-EXITS can be used only one time.
Ex:- if your assigning a USER-EXIT to a project in (CMOD), then you can not assign the same to other project.
ii) BADI's are oops based.
2) About 'BDCMSGCOLL' it is a structure. Used for finding error records.
3) Full form of BADI 'Business addins'.
3) System land scape will be depends on your project
Ex:- 'Development server'>'Quality server'-> 'Production server'......
Check the below links:
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/badi-vs-user-exit-405324
http://www.sapfans.com/forums/viewtopic.php?t=172792
Difference between BADI's & User-Exit.
1. Check the replies for your question which asked by another person.
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/569786
2. Similar thread.
http://www.sapfans.com/forums/viewtopic.php?p=559472&sid=99caa729618b18a8f7c46cc2f047af52
3. Same question explained
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Badi Tutorials
1. Sample program.
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
2. Implementing BADI.
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
Hope it helps.
3. From help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/5f/071eed117c11d5b37d0050dadef62b/frameset.htm
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/badi-vs-user-exit-405324
Differences between BADI and User Exits
Re: Differences between BADI and User Exits
diff between BADI and USER EXITs
Difference between BADI and User Exits..
https://forums.sdn.sap.com/click.jspa?searchID=519283&messageID=2515351
https://forums.sdn.sap.com/click.jspa?searchID=519283&messageID=2627911
https://forums.sdn.sap.com/click.jspa?searchID=519283&messageID=2847358
https://forums.sdn.sap.com/click.jspa?searchID=519283&messageID=2584155
https://forums.sdn.sap.com/click.jspa?searchID=519283&messageID=2826338
https://forums.sdn.sap.com/click.jspa?searchID=519283&messageID=2859102
Rewards Points if Useful
Regards
Gokul
Message was edited by:
Gokul

User Exits or BADIs!!!

Hi,
I have a concern on BADI and USER EXITS.
1.See in my program, I don't find the user exits using perform statement. However if i take the development class, I have found 4-5 user exits. is it possible to use any one of them in my standard program for modifications?
2. In BADI defination while defining the parameters, they are using some tables and parameters for exporting and importing.
But in my program, the data is getting stored in some other internal table which was not used as a parameter in BADI definition as export or import parameters.
My Question is, can I use my internal table which was defined globally in the particular BADI to have the required modifications in standard programs?
Please let me know if any one is having an idea on the above.
Thanks in advance.
Ramesh

Hi,
The "perform" style of user exits is very old and you can reference any global data within these. They have since been replaced with a call customer-function '001' , which is a function module or a BADI.
In a user exit or BADI you are restricted to using and changing the data as passed in the interface.
Darren

User exit or badi for transaction PPOME

Hi,
is there any user exit or Badi available when creating a
relation between PD objects by means of transaction PPOME?.
Best regards.

HI
To search for a badi, go to se 24 display class cl_exithandler.
double click on method get_instance, get a break point on case statement.
execute and start the required transaction in new session.
look for variable exit_name. It would show the available badi's.
Please do reward if useful
Regards
Dinesh

User exit or badi for transaction IW32

Hi all,
I am searching for user exit or badi for Transaction IW32 but not finding as per my requirement.here in transaction IW32 if field system status(STTXT) key value is 'Released', all line item components should get displayed in display mode.it should not allow to edit or change line item components.can anyone give user exit or BADI to achieve this.
Thanks in advance.
Regards,
Harshada

Hi,
Try to use this exit:
Enhancement EXIT_SAPLBSVA_001 STATTEXT Modification exit for formatting status text lines
Sample code:
IF ( sy-tcode = 'IW32') .
DATA: lv_str1 TYPE string.
FIELD-SYMBOLS : <fs_qmart> TYPE ANY.
lv_str1 = '(SAPLIQS0)VIQMEL-objnr'.
ASSIGN (lv_str1) TO <fs_objnr>.
SELECT SINGLE inact INTO lv_inact FROM jest WHERE objnr = viqmel-objnr
 AND stat = c_stat
 AND inact = space.
 IF sy-subrc = 0.
 LOOP AT SCREEN.
 screen-input = 0.
 MODIFY SCREEN.
 ENDIF.
 ENDLOOP.
ENDIF.
Alternativ badi:
BADI SAPLIQS0 IQS0_STATUS_MAINTAIN Control of Changeability of User Status
I hope this may helpfull.
Thanks,
AMS

User exit or Badi for VF11

Hi,
Can anybody suggest me
Any User-exit or Badi name for VF11 tcode (Billing cancellation)
Moderator Message: Search before you post and ask your questions in the right forum.
Edited by: kishan P on Feb 11, 2011 3:11 PM

Hi
Exit
SDVFX001 User exit header line in delivery to accounting
SDVFX002 User exit for A/R line in transfer to accounting
SDVFX003 User exit cash clearing in transfer to accounting
SDVFX004 User exit G/L line in transfer to accounting
SDVFX005 User exit reserves in transfer to accounting
SDVFX006 User exit tax line in transfer to accounting
SDVFX007 User exit: Billing plan during transfer to Accounting
SDVFX008 User exit: Processing of transfer structures SD-FI
SDVFX009 Billing doc. processing KIDONO (payment reference number)
SDVFX010 User exit item table for the customer lines
SDVFX011 Userexit for the komkcv- and kompcv-structures
J_3RSINV Userexit for the komkcv- and kompcv-structures
V05I0001 User exits for billing index
V05N0001 User Exits for Printing Billing Docs. using POR Procedure
V60A0001 Customer functions in the billing document
V60P0001 Data provision for additional fields for display in lists
V61A0001 Customer enhancement: Pricing
BADI
BADI_SD_SALES_BASIC
BADI_SD_TO_FM
BADI_SD_BILLING
Ranga

What is the difference between User exit and BADI

in user exit support to 4 types of exits(Menu exit,Screen exit,Field exit,Function module exit)in similar way is badi supported to all type

hi,
BADIs (Business Add-Ins) are the new way in which SAP allows you to enter additional logic into an application, and is based on OO ABAP. (Methods in Interfaces) Transactions SE18/SE19.
Customer Exits are the older method (which is still supported), whereby you create an include that is in a function module, which is called when the customer exit is activated. Transactions CMOD/SMOD.
In terms of terminology, people often use the terms "Customer Exit" and "User Exit" interchangeably, however, strictly speaking, User Exits are places provided in subroutines (notably in the SD module) where you can insert your own code, but require a modification to an include (although it is provided for customers to change).
They are two different methods to do the same thing: to check and update the data into std trx.
The user-exit is the old concept based on function module
The BADI is the new concept based on OO ABAP.
So you can often to find a BADI and an USER-EXIT to do the same thing and you have to decide what you prefer to use.
Anyway the new trx and the enjoy trx use BADIs as exit
User-exits are SAP's oldest way of updating data in standard programs - see MV45AFZZ - Form Userexit_Save_Document_Prepare.
Here you simply add ABAP code or add INCLUDES, etc
Customer-exits were SAP's next generation. They are built on the concept of function modules - where you add your custom within the Z func modules.
BADIs are SAP's newest and current way of updating data uisng Object-oriented concepts.
Please check this link.
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Check the below links:
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/badi-vs-user-exit-405324
http://www.sapfans.com/forums/viewtopic.php?t=172792
User-Exit is a specific place in a transaction-process where SAP offers
third parties to include there own business functionality. Actually
User-Exit is the namespace used for Exits programmed by SAP specifically
for SD. For the other modules it's called Customer-Exit.=20
>Business Add-Ins (BADI) =20
The use of object orientated code within SAP has lead to new method of
enhancing standard SAP code called Business Add-Ins or BADI's for short.
Although the implementation concept is based on classes, methods and
inheritance you do not really have to understand this fully to implement
a BADI.
Difference between BADI's & User-Exit.
1. Check the replies for your question which asked by another person.
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/569786
2. Similar thread.
http://www.sapfans.com/forums/viewtopic.php?p=559472&sid=99caa729618b18a8f7c46cc2f047af52
3. Same question explained
http://www.sap-img.com/abap/difference-between-badi-and-user-exits.htm
Badi Tutorials
1. Sample program.
http://www.sap-img.com/abap/business-add-in-you-need-to-understand-abap-oo-interface-concept.htm
2. Implementing BADI.
http://www.sapdevelopment.co.uk/enhance/enhance_badi.htm
Hope it helps.
3. From help.sap.com
http://help.sap.com/saphelp_nw04/helpdata/en/5f/071eed117c11d5b37d0050dadef62b/frameset.htm
Pls : award points if it is useful

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError) Log on failed. Ensure the user name and password are correct. (rsLogonFailed) Logon failure: unknown user name or bad

The report server has encountered a configuration error. Logon failed for the unattended execution account. (rsServerConfigurationError)
Log on failed. Ensure the user name and password are correct. (rsLogonFailed)
Logon failure: unknown user name or bad password
am using Windows integrated security,version of my sql server 2008R2
I have go throgh the different articuls, they have given different answers,
So any one give me the exact soluction for this problem,
Using service account then i will get the soluction or what?
pls help me out it is urgent based.
Regards
Thanks!

Hi Ychinnari,
I have tested on my local environment and can reproduce the issue, as
Vaishu00547 mentioned that the issue can be caused by the Execution Account you have configured in the Reporting Services Configuration Manager is not correct, Please update the Username and Password and restart the reporting services.
Please also find more details information about when to use the execution account, if possible,please also not specify this account:
This account is used under special circumstances when other sources of credentials are not available:
When the report server connects to a data source that does not require credentials. Examples of data sources that might not require credentials include XML documents and some client-side database applications.
When the report server connects to another server to retrieve external image files or other resources that are referenced in a report.
Execution Account (SSRS Native Mode)
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

User Exit or BADI on saving of Sales order cost estimate (CK51N)

Hi,
Can any one share with me what are the User Exit or BADI that gets triggered on saving of Sales order cost estimate (CK51N).
Regards,
Bijay

Hi
Check the link
Need Enhancement Spot or BADI for transaction ck51n
Regards
Sanil

F110 - Automatic Payment (User Exit, BTE, BADI)

I have requirement after generating payment document by F110 automatic payment. I need to send data to other system.
How to get all payment documents? Can I use a BTE, User Exit or BADI? Kindly help me.

Hi ,
You can create a DMEE or genrate Idoc to another system .
If you want to send excel file then you can create a dmee file in transaction DMEE with same formt provided by bank/ another system .
many Thanks

Forum user in a bad state

Similar Messages

Maybe you are looking for