Forums and Chats portlets

Similar Messages

• Can't see choices in forums or chat with tech support

  When I put a search in the forum and go to choose which discussions to search the menu list pops up but I cannot see the items - they are there but very faint.
  When I tried to chat with tech support I could not see what I was typing, although the cursor moved and when I sent my message it showed up.
  Need to fix this.
  Betty

  I gave up and called.

• N9, missing SMS and chat notifications during musi...

  Hope somebody can help, as I've spent many hours Googling for the solution.  Just got a new N9 64Gb, learning to find my way around.
  I have a huge problem with notifications.  Basically my phone is my MP3 player for my lifestyle.  I'm trying out free Sigma player since it plays by the folder.  With incoming phone calls, music stops and a ringtone comes through.  Not the case with SMS and chat notifications.  As long as music is paused, I hear SMS/chat notifications.  Nokia music player does the same thing.  N9 earbuds or 5800 earbuds, no difference.  Unless I'm staring at the screen, I miss SMS and chats.
  With 5800, I was able to listen to music/audio books all day (used FolderPlay), and SMS and chat notification interrupted the playback no problem.  I don't seem to be able to do the same with N9.  Is there a solution to this?  Am I missing something in the settings?
  I'm getting desperate.  Help?

  Hi,
  Welcome to the forum!
  You can try the following solutions:
  1. Uninstall and re-install the application.
  2. Update the application. If there's an available update.
  If it's still the same, then it's best to coordinate your concern with the publisher of the application. They'll be able to help you with your concern. 
  You can visit this link for the contact details of the publisher. The contact details are shown below the description: http://store.ovi.com/content/223031?clickSource=search&pos=1
  Note that you can also use the phone without the said application. 
  Hope this helps. 

• Overcharged and chat disconnected me.

  I just upgraded my service and got the bad news. I'm to be charged for the new service and my old service at the same time! Since it's Sunday and there's nobody awake at Comcast's toll free, I tried to resolve the issue through chat. The moment I told chat what my issue was, I was disconnected from it without any resolution. I expected the prorate charges. I expected the installation charges. But I didn't expect to be paying for services I just upgraded along with its attendant fees as well as the new service for the same time period. Comcast is nuts!

  Hi NikZak,
  Welcome to the forum and thank you for posting. It does sound like a bit of a nightmare. I should be able to help you with this. Please could you drop me an email with your BT account details and a link to this thread? My email address can be found by clicking on my profile.
  Thanks
  Paddy,
  BTCare Community Mod
  If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
  We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

• I need to de-authorize a previous install in order to reinstall CS5. i asked in this forum and the answer told me to come back to this forum and ask how? I am no further than I was before.

  I need to de-authorize a previous install in order to reinstall CS5. i asked in this forum and the answer told me to come back to this forum and ask how? I am no further than I was before.
  I was told to go to a website to download CS5 software but I already own the CS5 software. Then I was told to go to webchat to get "them" to deathorize the old install. But I was in webchat (as I am now) when I first asked this question. The answer seems circular and gets me no farther toward reinstalling my CS5.

  This is not web chat.  This is the forum, which is an extension of the Adobe Support system, but you need to talk to Adobe Support directly either by chat or by telephone and they can process the deactivation.
  There has been a problem lately with the links for getting into the web chat and for the phone support.  Try the following link and look down the page for a chat option.  If you don't see one, try using a different browser.
  Contact Customer Care
  If you still cannot see it then you might try the phone route, which would be unfindable as well if the chat is not appearing.  But the info for that is...
  Call: 800-833-6687   Monday—Friday, 5am—7pm PT

• Forums and Polls

  Hi
  Before buying Portal, i tried Portal Online, and i could see Forums and Polls. I can't find them in portal r2. Where have they gone ? Are they commercial partner's portlets I'll have to buy ???
  regards
  A.

  Arnaud,
  3 options
  1. Buy the Partner's portlets
  2. Download the Collaborative Components from OTN
  http://otn.oracle.com/software/tech/java/servlets/content.html
  and integrate them with Portal
  3. portalstudio.oracle.com -> Knowledge Exchange. Not sure about polls, but there is a discussion forum portlet (among others)
  Hi
  Before buying Portal, i tried Portal Online, and i could see Forums and Polls. I can't find them in portal r2. Where have they gone ? Are they commercial partner's portlets I'll have to buy ???
  regards
  A.

• Safari opens only these forums and other Apple pages?

  I had to remove the router from my iMac last night, so I set the Network panel to work with the DSL modem only. After doing so, Safari only connets and opens the Apple forums and other Apple pages, nothing else. Also, Sotware Update won't work.
  I have reinstalled the router, and right now the Network panel indicates that the network is working, and that the computer is connected to the Internet via the router and modem. It does not matter how many times I "Create A new Location" and then apply it. Safari won't work with any of the bookmarks, except for the Apple bookmarks.
  I restarted the computer from the (backup) external hard drive and ran Safari from there, and it works fine. However, I followed the advise of an Apple Technician on a chat, and was told that I could drag Safari from the external HD to the internal, and replace Safari with it. I did so, and then restarted from the internal HD, placed the Safari alias in the trash, created a new alias and put it in the Dock, and used Safari. But Safari is having the same problems.
  It seems that both Safari, and Software Update follow the same path from the computer to the Internet, so i am trying to figure with files in the System have screwed-up.
  Do you have any ideas of what the problem with Safari may be?

  I will respond to myself to keep you informed of the progress with my problems and Safari/Software Update:
  1. I created another account, but again there was no change with Safari nor with Software Update. I am certain that the problem is related to Software, perhaps Preferences and such.
  2. However, since I don't know enough about OS X to mess around with it, I decided to start from the LaCie external HD as I did before, and proceeded to perform a "Smart Update" with SuperDuper. Before the Smart Update, I printed the last unread e-mail in the mailboxes, since I know that SuperDuper would erase those. I backed the iMac's HD a couple of days ago, before encountering all of these problems with Safari, so all the files and applications are fresh and in good order.
  3. I am replaying to myself using Safari, after I restarted from the iMac's internal HD. Safari now works as well as ever, and I am certain that Sotfware Update will work fine, too.
  I hope that Apple takes notes on the problems several of us are having with Safari. Just for the records: This version of Safari is the latest in Mac OS 10.4.2. A week or so ago, I upgraded OS 10.3.9 to OS 10.4, and had quite a lot of trouble with the Network panel. Regardless of the settings to use a router and modem, or jut the DSL modem, a connection to the server could not be established, and whenever such connection was possible, Safari would only open the Apple pages, and Software Update would not work.
  I ended-up erasing the hard drive and reinstalling Mac OS 10.4 three more times, for a total of four, before I could get Safari and Software Update to work. On the last attempt, the only difference from the other attempts was that this time I didn't dare use Safari until every little update was installed by Software Update. Now, please note that the problems I had then were not exactly the same, since this time Network Diagnostics passed the connection test with flying colors. The previous times, a connection could not be established 99% of the time. But even though the problems were not exactly the same, I believe that whatever happens, to Safari, FireFox (FireFox was not working), and Software Update is related to whatever path these applications follow toward an Internet connection.

• Hello i am new to the HP forum and have a lot of questions. does anyone know a lot about computers

  hello all, I am new to this forum and hope to find some help. I have a HP pavillion thats about 2 years old and having a bunch of minor issues and trying to find someone that can help. when i had HP warranty they seemed to do more damage than good. my computer starts up in selective mode always and I dont know much about booting and safe boot. I tried doing a system restore but it starts and will go for days without ever completing, so thats one issue. also I have alot running at startup and not sure what to disable and when i do disable it its still there after a restart. does anyone know a lot about PCs and can help me. I would greatly appreciate it.

  1.  yes.  there's no one place to find out how to do that.  you'll need to learn how to use flash software.  it's mature software with many features and there's no shortcut to learning how to use it.  it would be a surprise if you could build a decent game with those specs in less than 100 hours working with flash.
  2.  insignificant issue.
  3.  for someone unfamiliar with porting flash apps to iOS apps, no.

• Email and Chat STOP working

  Email and Chat STOP working. NOKIA - try OVI services.
  Nokia with Microsoft and Windows Mobile 7 - so; forget and don't hope about quality of our Symbian system and Ovi service
  http://www.nokia.com/press/press-releases/showpressrelease?newsid=1488004
  http://www.microsoft.com/presspass/press/2011/feb11/02-11partnership.mspx

  Hi Abdelhediamir,
  Is the mobile data connection (with your provider) up and running? Are you able to browse the web using the phone's browser? If no, this is most likely the reason why the issue is happening. Kindly coordinate with your Network Provider to get the correct Internet/APN settings via SMS. Save it on the phone so it will be configured.

• From reading this forum and my own it experance the HP "eprint" email server is flawed!

  Having read on this forum and from my own experience only a limited number of email providers email addreses will be accepted by the eprint email address it certainly does not accept emails from hotmail.com and hotmail.co.uk they bounce almost before they are sent!!!
  So own up HP I bought in to your sales BS  and there certainly wasn't any caveats saying that you eprint system does it did not work with certain email providers.
  I note that someone calling himself an interested employee of HP  has been suggesting that its the providers fault, well I have been using hotmail for donkeys years and the only time my emails have bounced is when I have incorrectly entered the wrong send address configuration or the attachments were too large!
  I am getting on, but for the life of me I cannot found any eprint support contact email address on their web page, is there one? or is HP hoping that their customers will sort out their problems for them?
  For the record I can see my printer on line via the eprint web site and all the reports are correct so its not a fault at my end .
  So HP if you actually monitor this forum get your act together and give us what your sales blurb said it would!

  For those who are experiencing ongoing issues with their web services, you can attempt to try the following steps that may
  help resolve your problems.
  1.) Completely shut down your printer and restart it
  2.) If you have prints that have not printed, log into ePrint Center (or create an account if you do not have one) and
  then look for your printer status. If printer status is green but you still have pending jobs, delete the pending jobs one at
  a time (Starting with the oldest first). There may be a print job stuck in the queue that further restricts other jobs from
  completing.
  a. If option 1 or 2 above still doesn’t work, removing web services and re-adding web services will cause the printer to
  reattach to the cloud.
  b. Please note that if you attempt option 3, you will get a new eprint email address (and lose your custom one with no
  ability to get it back) furthermore, you will need to re-add your printer back to your ePC account.
  I am an HP employee

• How do i make a single connection to handle video, audio and chat

  I'm developing an application and i want to make one single connection for video(netstream) and chat(sharedObject).
  I have one connection for each but i have limited connection availeble in the server so i need to make a single connection to handle the video net stream and chat sharedObject.
  I use this urls to connect:
  private var serverWebcamURL:String = "rtmp://myserverIP/live";
  private var serverChatURL:String = "rtmp://myserverIP/multicast/chat";
  What do i have to do to make this work?
  Thank You,
  Just-ME

  LOL...thanks QTK.
  In front of my face!

• How to share user login and passwords between blog, forum and Dreamweaver?

  I have a site created with Dreamweaver. I want to allow
  visitors to create a username and password which will allow them to
  post blog feedback to many pages on my site, post in a forum, and
  provide their own comments into a database I can show the results
  for on certain pages. The trick is I want this to all work with one
  username and password so they don't have to use 3 different logins.
  I'm not sure if this is too technical, but I thought I'd ask before
  getting into it and realizing it won't work or I don't have a clue
  what I'm doing.
  I want to allow blog data to be added to a page with CSS
  content by both admin and visitors (to create an active discussion
  based on the data on that page). I've seen it on some sites, but
  don't know how to do it myself:
  http://www.joystiq.com/2008/05/19/ea-extends-take-two-purchase-offer-deadline-a-third-time /
  I can see they are using Weblogs Inc. software, but it
  appears the company only collaborates with people they see a fit
  with.
  I also want a forum and I know phpp is recommended. I like
  the interface, but am unsure if the login data can be shared with a
  blog.
  Lastly, I wanted to allow users to write their own reviews
  and then show the results and average them for display on the site.
  I have read and know how to create the database for the site. I
  just don't know how to share the usernames and password information
  with the blog and forum.
  Also, how do I force Dreamweaver to validate that the
  usernames and passwords are exactly correct before letting people
  post under that identity?
  I'm loving Dreamweaver and making sites so far. Just trying
  to take it to the next level.
  Thanks very much!

  juxtafras wrote:
  > I have a site created with Dreamweaver. I want to allow
  visitors to create a
  > username and password which will allow them to post blog
  feedback to many pages
  > on my site, post in a forum, and provide their own
  comments into a database I
  > can show the results for on certain pages. The trick is
  I want this to all
  > work with one username and password so they don't have
  to use 3 different
  > logins. I'm not sure if this is too technical, but I
  thought I'd ask before
  > getting into it and realizing it won't work or I don't
  have a clue what I'm
  > doing.
  >
  > I want to allow blog data to be added to a page with CSS
  content by both admin
  > and visitors (to create an active discussion based on
  the data on that page).
  > I've seen it on some sites, but don't know how to do it
  myself:
  >
  >
  http://www.joystiq.com/2008/05/19/ea-extends-take-two-purchase-offer-deadline-a-
  > third-time/
  >
  > I can see they are using Weblogs Inc. software, but it
  appears the company
  > only collaborates with people they see a fit with.
  >
  > I also want a forum and I know phpp is recommended. I
  like the interface, but
  > am unsure if the login data can be shared with a blog.
  >
  > Lastly, I wanted to allow users to write their own
  reviews and then show the
  > results and average them for display on the site. I have
  read and know how to
  > create the database for the site. I just don't know how
  to share the usernames
  > and password information with the blog and forum.
  >
  > Also, how do I force Dreamweaver to validate that the
  usernames and passwords
  > are exactly correct before letting people post under
  that identity?
  >
  > I'm loving Dreamweaver and making sites so far. Just
  trying to take it to the
  > next level.
  >
  > Thanks very much!
  >
  What you want is a CMS, but your not going to get one for
  Dreamweaver,
  well, not the kind you want. Something like Joomla can do
  this, you can
  add phpBB3 to it, and then using the JFusion extension allow
  them to
  share the user database, but I warn you now, its a steep
  learning curve.
  I ended up buying a book just to get to grips with the key
  concepts.
  Steve

• Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest

  Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

  Hi .. My phone has stopped vibrating.I have read the solution given by some users on this forum and have tried all the tricks. But nothing seems to be working. My phone still does not vibrate.please suggest.

• Problems signing in to PSE/PRE Forum and Customer Service

  Hello-I am presently  running PSE/PRE8 on a win8 computer with 12GB memory and1TB HDD. I am searching for information on PSE/PRE12. However, I am having problems with my PW/ID. I understand that Photoshop.com has been eliminated and this is the source of my sign-in problem. I change my PW and the new PW works for a while and it becomes the incorrect PW or User ID. Also,I added a new email address to support email problems. I was sent an email to click a verify link but the link was not included and the email was a noreply. I cannot contact Customer Service because it is sending noreply emails. I was able to signin to the forum during my last visit but was told that I was not eligible to post messages not answer post. I need to be able to reach Customer Service but I  preently do not have a method to contact  it. Thanks.

  Hello Jorma- Thanks for the response however,I cannot locate your response to my "Problems signing in to pse/pre forum and customer Service". I checked the Photoshop Elements forum but I was not able to locate the subject.

• I cannot open my Hotmail emails from Firefox. I have been on the hotmail Help Forum and they suggest to use Internet Explorer. Does Forefox not support Hotmail now?

  Hi,
  I can log into hotmail but cannot open my emails or go to Sent items or anything. I have gone on the Hotmail Help Forum and MANY people are having the same problem. Hotmail say we should use Internet explorer and they do not really answer about using Firefox.
  People using Firefox 3 and 4 are having problems.
  Also, i downloaded Forefox 4.0.1 and it was not fully compatible with Kaspersky - has this problem also now been resolved?
  In summary - is Forfox 4.0.1 NOT comaptible with Hotmail and Kaspersky?

  Sorry, I can't help with Hotmail, beyond clearing the cache - I haven't used it for 11 or 12 years now. Surprising that a Firefox 3.6 version would have trouble there, as 3.6 has been around for well over a year and Hotmail problems are usually with a recent release of Firefox.
  IMO, if Hotmail support can't help you with Firefox issues on their website and can only recommend using IE, maybe it's time to change web mail service providers. My advice is to signup with a different web mail service, one that takes Firefox seriously. Then set up forwarding in your Hotmail account to have all your Hotmail emails forwarded to that new account. Then slowly transition your email contacts over to the new email address over time. As long as you log in to Hotmail every month or two, your account there should stay active and emails sent there should get forwarded to the new email account. I have done that three times in the last decade, and the first one I transitioned from was still forwarding email thru the two intermediary accounts to my current account until last summer when that service finally changed owners and they wanted all new accounts set up or transitioned to their new software - which I didn't do - and I hadn't even signed into my account there in over 4 years and "forwarding" was still working.