Found a problem with new upgrade

Hello everyone,
I did find something not so nice about the new upgrade. I had installed a template that I purchased from 11mystics. The template is no longer accessible through the template chooser. I tried both ways either in iweb clicking on templates or at start a new site. I looked in the folders where they were installed and all the files are in their respective place. the template itself in the theme folder and the thumbnail in the thumbnail folder. I remove them and reinstalled. I repaired permission, I erased the plist. all to no avail template still not available.
I do not know what to think. I cannot beleive that Apple would prevent us from using 3rd party templates?
Your opinion or advice please.
Thank you
Mireille

Tony, this seems to be a bug in 3.2.3, see this thread saving from photoshop
Regards
Léonie

Similar Messages

Problems with new upgrade

Is anyone having problems with the new IOS 6 upgrade. I couldn't log into my iTunes account and the maps app, which I use loads is now rubbish! Can it be uninstalled without losing everything I've put on the iPad since purchase.

It is not possible to uninstall or downgrade iOS 6.

WoW Cedega/Wine problems with new upgrade

Greetings.
World of Warcraft had been running perfectly on Cedega in ArchLinux, but Yesterday (Oct 29) I upgraded my system, and now WoW crash in game, and not error message is displayed, only the game freezes.
Also Thunar says libdbus-1.so.2 not found, i looked for it and I found libdbus-1.so.3, I linked it to libdbus-1.so.2 but it did not work.
Any solution?
P.D. Sorry for my bad english.

You can try using WoW repair tool, but I'm unsure if it works on Linux http://www.blizzard.com/support/wow/?id=aww01669p
Some people suggest to reinstall WoW in wine... First you delete evrything in /home/username/.wine and than run winecfg
There are also some suggestions to delete everything in the folders WDB and WTF
Hope that helps... And I have absolutely no idea why does this happen after update...

Document Creation error - "We're sorry. We can't open document name because we found a problem with its contents"

Morning Friends,
I have created a SharePoint 2010 "Site Workflow" that is designed to take information from a form and create a Word doc with the gathered information and store this Word doc in a document library.
I am using Sharepoint 2013 with Office 2013
I understand there are a lot of steps (19) outlined below and I can provide more information as needed but the bottom line is this, workflow successfully takes info from an initiation form, uses the info to create a Word doc. Places this Word doc in a library.
When attempting to open / edit doc, receive error
"We're sorry. We can't open <document name> because we found a problem with its contents"
Details - No error detail available.
Any info or advice would be greatly appreciated.
Very high level view of what I have done:
1 - Created content type called "Letters"
2 - Added site columns " First Name" and "Last Name"
3 - Created and saved to my desktop a very basic Word document (Letter.docx) that says "Hello, my name is XXXX XXXX"
4 - In the advanced settings of the "Letters" content type I uploaded this "Letter.docx" file as the new document template.
5 - Created a new document library called "Letters"
6 - In Library Settings - Advanced Settings, clicked "Yes" to enable the management of content types.
7 - Then I clicked "Add from existing content types" and added the "Letters" content type
8 - Back in the advanced settings of the "Letters" content type I selected "Edit Template" and replaced the first XXXX with the Quick Part "First Name" and the second XXXX with the Quick part "Last Name"
9 - Created a new 2010 Site workflow called "Create a Letter"
10 - To the workflow I added the action "Create List Item"
11 - Configured the action to create Content Type ID "Letters" in the document library "Letter"
12 - For the "Path and Name" I gave it a basic name of "Letter to"
13 - The next step was to create the Initiation Form Parameters and added to form entries "First Name" and "Last Name"
14 - I then linked the initiation form fields to the data source "Workflow Variables and Parameters" to their respective Field from Source parameters
15 - Went back to the "Path and Name" and modified the basic name of "Letter to" to include the first and last name parameters.
16 - Saved - published and ran the work flow.
17 - As expected, Initiation Form prompts for First and Last Name. ("John Doe") Then click "start
18 - Go to document library "Letters" and see a new Word document created titles "Letter to John Doe"
19 - Go to open / edit the Word document and receive the following error
thoughts? Any info or advice would be greatly appreciated.

See this MS support article for SP2010 workflows and generating Word docs:
https://support.microsoft.com/kb/2889634/en-us?wa=wsignin1.0
"This behavior is by design. The Create
List Item action in the SharePoint
2010 Workflow platform can't convert Word content type file templates to the correct .docx format."
I've had success in using SP 2013, Word 2013 (saving a .docx as the template instead of .dotx for the document library content type), and an SP 2010 workflow using SP Designer 2013.

Problems with auto upgrade Anyconnect 3.1

Hello,
I'm having problem with auto upgrade of Anyconnect 2.5 to 3.1.
Here is the situation :
I have ASA5510 running ASA 8.4.5 and clients are running Anyconnect 2.5.3055 and 3.1.00495 with 2 different profiles.
Clients with 2.5 can upgrade to 3.1 but then receive an "Invalid host entry" when they try to connect with new client. It works if they use FQDN instead of profiles. It's the same situation with Windows 7, Mac OS X and linux.
If I configure client software back to 2.5 on ASA, it works again for every client.
Do you have an idea ?
Thanks for your reply.
Yann

I have seen the same behavior on Mac OS X. A couple of points for me:
If I delete the profiles from /opt/cisco/anyconnect/profile then I can connect once (using the FQDN) but it then downloads the client profile and on next attempted connection it receives "invalid host entry." My profiles use the FQDN of my ASA and both forward and reverse DNS resolution are configured properly.
My workaround is to remove the AnyConnect Client Profile entirely, but I can get away with that because I have a very simple setup, with all users in one default group. If I had to pass different profile information to different users that would not be a solution.
Second, better workaround: I just exported the client profile, imported it under a different name, edited the new client profile to remove the server address, and assigned the new profile to the group policy. At their next login, users get all the profile settings and since the client remembers the FQDN they used to connect it doesn't adversely affect the user experience.

Problem with "new page as a copy" function in 4.2

Hi all,
I found several problems with version 4.2 in the functionality of "new page as a copy".
In particular, copying a page from another application, you lose the references to the template (eg template region, button ...) and these are replaced by a numeric code (eg 426589173 ... instead of "Region without Buttons and Titles") and, worst of all, the reference is lost to the buttons on the process conditions and branches.
Has anyone encountered the same problem? I never had any problems with version 4.1.1
Thanks
Stefano
Edited by: Stefano_i0600006 on 18-ott-2012 7.52
Edited by: Stefano_i0600006 on 18-ott-2012 7.52

Hi Stefano,
Thank you for bringing this issue to our attention. I've logged bug *14786585* to track this issue. We'll endeavour to identify a resolution as soon as possible.
Regards,
Hilary

Keynote conversion: Powerpoint found a problem with content....

Hi all,
MS office is killing me and I'd appreciate any pointers and comments
Here's the situation:
1. Keynote file (multi-revised over the years) exported to powerpoint file XYZ in New-MBP
2. New-MBP opens XYZ and gets "found a problem with content in..."
3. Click on "repair", open up XYZ, and get bunch of blank pages
4. Same XYZ file copied to Old-MBP(freshly installed, now my home media server, not many apps installed).
5. Same version of Office 2011 installed in Old-MBP, opened the file just fine!
(so the problem is not NewMBP Keynote)
6. Created a test account in New-MBP
7. Attempted to open XYZ with Powerpoint
8. Same "found a problem with content in..."
9. Click on "repair", open up XYZ, and get bunch of blank pages
(so the problem is not user/privileges, but the NewMBP system-wide issue?)
10. In New MBP, created a brand new Keynote file, did some light work
11. Exported new keynote file to powerpoint file RRR
12. In New-MBP, RRR opened under Powerpoint 2011 just fine!
(so the problem might be the original multi-modified Keynote file?)
(But its powerpoint file XYZ opened in Old-MBP just fine!)
I've uninstalled and reinstalled Office 2011, with SP1, still cannot open XYZ properly.
I've copied all Office 2011 files from Old-MBP to New MBP, still cannot open XYZ properly.
I"ve googled the problem and tried anything I could find, still cannot open XYZ properly. (deleting presenter notes... etc)
My current conclusion: some kind of software system conflicts in the New-MBP.
Anyone with any ideas?
Thanks a lot in advance.
Will

Hi Will,
Met the same issues and spent hours to find the problem. And guess what ? I found it :-)
For some reason, groups are not supported by Powerpoint converted files.
This is why every slide that contains group is not converted.
The workaround is to ungroup all the groups in your keynote file (alt+cmd+shift+G) and you'll see your slides being converted again.
I'm not sure where the issue is coming from. I would tend to think it should be resolve by the Apple Keynote team.
Not sure whether it has been escalated so far.
There might be some other small issues. One or two slides were not properly converted although they were not containing group, but this should fix most of them.
Have fun degrouping your slides

Problems with new catalyst

I Have a problem with newer catalyst version 4.7 and 4.8..sometimes the screen goes totally black,it's like the montitor goes into sleep mode or screensaver.
This can happen at startup or after while the only thing i can do is to restart the computer by turning it off(or reset).
With cat 4.6 and the drivers before everything works fine.
I tried fastwrites on/off(no good)
Disable Vpu recover(no good)
Raise agp voltage to 1.6V(no good)
I also tried asus own driver but the same thing happens.
However i came to think of if there is anything i should change in power managment in bios because the comp won't wake up from sleep mode when pushing on the keyboard or moving the mouse(this is with cat 4.6 wich works great otherwise)
I hope someone have an answer to my mysterious problem

Quote
Originally posted by Ycore
This is my exact problem. Computer has been running ROCK solid for the last few months with 4.7 catalysts. I install the 4.8's, reboot, load up Doom 3, and the computer hard locks within seconds of 3D mode being activated. Reboot, run 3dmark2001, and again, hard lock within a few minutes into the demo (screen goes black into power savings). At this point I figure it's a problem with the 4.8's, so I reinstall the 4.7's, fire up Doom 3, and IT FREEZES AGAIN.
At this point, I'm loathing my decision to mess with my vid drivers at all, and wondering how come the vid card has started to lock up in 3d.. I start messing with all sorts of settings.. Finally, tuning the AGP speed from 8X to 4X totally resolved the freezes.
QUESTION: WHY ALL OF A SUDDEN DID 8X AGP STOP WORKING???
AMD 64 3200+
K8T-NEO
Antec 430W PSU
ATI RADEON 9600 PRO AGP
SB LIVE
1GB CORSAIR C2 DDR (2x512)
Lite-ON DVD/CD+RW
Windows XP SP2
I have never got my 8x AGP to work, its always hard locks when I use it...dunno why I don't really care. When I upgrade to a pure 8x AGP card i might if it still happens. Actually if it continues to happen there is a good chance I will get rid of this board and get the nforce probable. But at any rate, setting AGP to 4x has always fixed every video card problem I have had since putting this computer together. So try that I suspect it will fix your problem as well.
Also note that we have very similar setup's so try it and let us know if that works out for you.

Problem with new version 4.3.2 apps not working " after update to the new version "

Problem with new version 4.3.2 apps not working " after update to the new version "
i was in 4.3.1 then i do the update , but now after update i face this problem , so what i Supposed to do ?!!

Hi There
Had the same problem as you. App would terminate when launched.
Solution to working You Tube app:
-Go to playstore
- Uninstall app (it doesn't remove the app, only removes the update)
- "Et Voila", working again.
This doesn't correct the problem, it's just a workaround for you to be able to use youtube app again.
Hope it helped.
Best Regards

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add

I bought new i phone 5 3 days back, after that asked for new update which is 6.1.4, after updating my iphone i am not able to use cellular data services. I called up data provider, they says its the problem with new software update. There is no option add APN. Now when i switch to safari its showing you are not subscribed for cellular data. But I am able to use data on other phone.
Will you please help me in this regard?
Another issue, since i bought my new iphone there is dust inside back main camera.
Your advises are highly appreciated.

Hey Shaiju isac,
I'd take a look at the following article, it'll guide you though steps to you troubleshoot cellular data issues on your iPhone:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
Cheers,
David

Wifi problems with new ipad

I'm trying to learn how to correct wifi problems with new iPad. It is the wifi only, 64GB model. I want to be able to use it at work, where we have a great wifi network. I can usually connect to our network with no problem, but after an hour or so my iPad loses the network. When I try to reconnect, I see that the network is showing full strength reception, but I get the error message from the iPad that I am "Unable to join" the network. My iPhone connects to the same network seamlessly, as do all of the other iPhones of my co-workers and the older generation iPads that some of our staff has.
At other locations, I typically have no problems (home, apple store, etc.) but I have had the same situation pop up at a coffee shop where I could see that there was a wifi network available, but I could not join it even though it was the shop's free wifi.
I have tried turning the iPad off, turning off wifi and turning it back on again, and forgetting the wifi network in question. I can't think of any other methods that are available to an end user to correct the problem.
I have already gone to the Apple store to swap out the unit, and the newer one is having the same symptoms.
Can anyone offer any advice here? This is quite frustrating.

No problem! Have a read at this most interesting article which has special significance as regards your models!
http://edition.cnn.com/2012/04/05/tech/gaming-gadgets/ipad-wi-fi-issues/index.ht ml
However, I attach an extract from another thread for your perusal. You can disregard any suggestions/links you have already explored -
created by Texas Mac Man in Using iPad - View the full discussion
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom ;)

List of Problems with new Web Mail

List of Problems with NEW Web Mail :
- At first doesn't open full page message list or retain full page as default setting, have to drag down bar
- Only shows 20 message lines after “pulling down” the divider, screen partially empty until I scroll down. It should show at least 26, preferably all available
- After moving bar, bar moves back up after going back to inbox (not delete message) after reading a message, have to move it down again, and again...
- Doesn't go to next message when delete message on screen is selected, no setting option for default to do this.
- There is a drop down to select which folder to move a selected email to. The initial display shows 7 usable choices, with the usual slider and arrow to show more choices. The space on the slider clearly shows more choices are present (actually about 20 or so are there), but any attempt to use the slider or arrow to see more choices causes the drop-down to instantly disappear. I can't move the selected field with arrow keys either. I can select any of the visible 7 choices, and move an email to only one of the 7. NOTE: This one works in both IE and Firefox, but if Verizon Webmail was fully web standard (see http://en.wikipedia.org/wiki/Web_standards) compliant it would also work in my preferred browser, Mozilla Seamonkey, the direct descendant of the original Mozilla browser. Webmail should be FULLY web standard.
- Occasionally a message will move from inbox to trash, without NO indication or command to move them.
- Emails occasionally flash an error message and simply disappear - not to trash or other findable place, just disappear. No time to read the error message either.
- No way to set a whitelist for supposed spam emails, unless the whitelist for “Blocking” is the same. Very unclear.
- How can I switch my service back to the original, basic, email which works ok? I know it’s still there, since some of my other accounts still access it!!!
This seems my only way of getting this info direclty to the programming staff. If it doesn't actually do this, will SOMEONE PLEASE FORWARD THIS MESSAGE TO THEM !?!
Thanks!

vz_ric wrote:
The majority of websites are set up the same way for all browsers. It's the software manufacturers responsibility to make their software compatible with websites, not the other way around. Otherwise everyone who has a website will have to make 10 different sites to work multiple browsers.
Contrarily, it is Verizon's, as well as other companies like Verizon whose customer base uses a wide variety of web browsers, web page designers' responsibility to use only standard W3C-recognized code and not to use non-standard non-W3C-recognized code, e.g., Microsoft's Internet Explorer specific code, when designing their web pages. In my opinion based on my observations, Verizon's web page designers are too often guilty of using IE-specific code.

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.?? y apple is nt working on dis problem wen users are facing problems with new os x .....

I suggest you contact Adobe tech support or their Mac forums for assistance.

Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple

Reposting this If your having problems with new Windows 8.1 do a full uninstall of all Apple iTunes programs but uninstall them in right order and then do restart of computer then reinstall newest iTunes and it will all be fixed up syncing problems or other problems this is thanks to Apple phone support

What is your technical support question for these user to user technical support forums?

I think I found a problem with the calculator application.

I'm a south korean highschool student and I think I found a problem with calculator application. I use iPod touch 4th generation with iOS 5.0.1. I was playing with calculator app and I found out that 0.1!(factorial) is 0.951350769866873. This can't be right bacause factorial calculation can only be definrd whan n is natural number or 0(in n!). I want apple to correct this error.
And if you are someone working with apple, please let me know the algorithm of factorial calculation(if possible). I would be grateful if I can have a chance to study the algorithm and find out what made 0.1! possible.
so question.
do anybody know how to send an email to apple? I tried but I couldn't find the address.

Apple doesn't dialogue with users via email the way you want, but you can report such problems to them via
http://www.apple.com/feedback/
But in this particular case you should be aware that factorial can in fact be done for non-integers:
http://en.wikipedia.org/wiki/Factorial#Extension_of_factorial_to_non-integer_val ues_of_argument

Found a problem with new upgrade

Similar Messages

Maybe you are looking for