FPGA Compile error and cannot find the compilatio​n server

Hi,
My name is Bonghun. I recently installed the Labview 2011; previously, I installed 2010 and Labview worked very well.
I am using a Compact Rio (cRIO 9022 and chassis 9114).
I installed Labview 2011, Real time and FPGA modules including crio 4.0, Xilinx 10.1 and 12.4.
When I compile a FPGA.vi, it doesn't compile FPGA.vi.
Labview requests the message which ask to select compile server. After selecting the local compile server, Labview
requests at each step again and again.
Error number is Error - 123002. occured at niFpgaCompileFarm_OpenJob.vi
I tried to remove all programs and re-install several times but still I could not find the solution.
Please help me and let me know what is problem in my system.
Thank you.
Attachments:
Trouble in compile.ppt ‏179 KB

I am having this issue with LabVIEW 2012 running in Windows XP on a PXI-1042Q to run an FPGA on cRIO-9075.
I had no problem running through the process on my office PC with the same Software/Modules/Drivers installed. Compiler ran without problems.
I ported my project over to the PXI Chassis and cannot compile because CompileWorker closes right after intermediate files finish generating. I am using Local Server and all the necessary modules including Xilinx are installed (I uninstalled EVERYTHING and did a complete reinstall also and still get the same result). 
When the Compilation Status Window comes up, it says Attempting to connect to compile server and CompileWorker immediately says it has Encountered a Problem and needs to close. The Compilation status Window gives me a message saying:
"LabVIEW FPGA: The compilation cannot be performed by the compile worker. The compile worker may be configured incorrectly for this compilation, or it may be in an error state."
I also tried making a new project with a simple FPGA VI and tried compiling and got the same results.
Any thoughts?

Similar Messages

  • Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"

    Can not receive Mac mail -error Outlook cannot find the server. Verify the server information is entered correctly in the Account Settings, and that your DNS settings in the Network pane of System Preferences are correct.  Account name: "MacMail"
    What are the correct mail account settings and more importantly the correct DNS settings
    Thank you for any help you may be able to provide
    Cheers
    Chris (iMac i7)

    Do not delete the old account yet. sign up for an iCloud account if you haven't.
    I understand .mac mail will still come through. Do not delete the old account yet.
    You cannot use .mac or MobileMe as type of Account, you have to choose IMAP when setting up, otherwise Mail is hard coded to change imap.mail.me.com to mail.me.com & smtp.mail.me.com to smtp.me.com, no matter what you try to enter.
    iCloud Mail setup, do not choose .mac or MobileMe as type, but choose IMAP...
    On second step where it asks "Description", it has to be a unique name, but you can still use your email address.
    IMAP (Incoming Mail Server) information:
              •          Server name: imap.mail.me.com
              •          SSL Required: Yes
              •          Port: 993
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    SMTP (outgoing mail server) information:
              •          Server name: smtp.mail.me.com
              •          SSL Required: Yes
              •          Port: 587
              •          SMTP Authentication Required: Yes
              •          Username: [email protected] (use your @me.com address from your iCloud account)
              •          Password: Your iCloud password
    Also, you must upgrade your password to meet the new criteria:  8 characters, including upper and lower case and numbers.  If you have an older password that does not meet these criteria, when you try to setup mail on your mac, using all of the IMAP criteria listed above, it will still give a server error message.  Go to   http://appleid.apple.com         then follow directions to change your password, then go back to setting up your mail using the IMAP instructions above.
    Thanks to dpepper...
    https://discussions.apple.com/thread/3867171?tstart=0

  • I have installed Adobe packages and cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?

    I have installed Adobe Creative Cloud for teams CC Packages which says that Acrobat XI Pro is installed. Your support page says it does not install Acrobat and I have to look in the Extensions folder for an MSI file.  I have run a number of searches and  cannot find the Acrobat extension folder please advise how can I get these applications to load onto my computer?
    Also I now administer the teams and have accepted the invitation to I received to be a team member and download the apps.  The admin page shows that I have been sent an invitation but does not show my account as "ACtive" unlike my other team members.  I tried to use the link in the invite to accept it become active but the link displayed an error saying I had already accepted the invite... why is no account not active?
    Finally what other product downloads in Creative Cloud do not actually download as part of the Creative cloud Packager for downloading the apps? e.g. acrobat and what else?

    My apologies Eadeszoo I believe our support agents are unavailable on January 1.
    Are you able to copy the contents of the DVD to your computer?  Are you receiving any particular error messages when you are trying to install?  Finally which operating system are you using?

  • Acrobat startup error 3: Cannot find the path specified (citrix)

    If a user logs in an error is generated: Error: 3 - The system cannot find the path specified. 'OK' has to be clicked, otherwise Adobe Acrobat and Distiller do not work.
    The system is a Citrix environment. Not all terminal servers experience this problem.
    Thank you in advance for your help.

    Hi,
    Before going further, what's the specific error code?
    The following article provides information on Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and can be worth taking a look.
    Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003
    http://social.technet.microsoft.com/Forums/en-US/38953e87-52de-460a-a6a9-1865ee9ab3b1/error-system-cannot-find-the-path-specified?forum=windowsbackup
    Besides, the following thread also relates to the error "The system cannot find the path specified" and can be referred to for more information.
    Windows 7 backup "The system cannot find the path specified. error 0x80070003"
    http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
    Best regards,
    Frank Shen

  • (Error) System cannot find the path specified

    I am getting a error of "The system cannot find the path specified when I try to run windows server backup utility on windows 2008 standard
    I have done a upgrade on one of my poweredge 2900 server from windows server 2008 standard to R2 Enterprise. Now I would like to push a backup from the 2008 standar to the enterprise and on the 2008 standard i am getting the error The system cannot find
    the path specified  when I run the backup utility. Please Help 

    Hi,
    Before going further, what's the specific error code?
    The following article provides information on Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003 and can be worth taking a look.
    Windows backup or restore errors 0x80070001, 0x81000037, or 0x80070003
    http://social.technet.microsoft.com/Forums/en-US/38953e87-52de-460a-a6a9-1865ee9ab3b1/error-system-cannot-find-the-path-specified?forum=windowsbackup
    Besides, the following thread also relates to the error "The system cannot find the path specified" and can be referred to for more information.
    Windows 7 backup "The system cannot find the path specified. error 0x80070003"
    http://social.technet.microsoft.com/Forums/windows/en-US/629597bb-7be0-455c-b81e-a149472d3f9b/windows-7-backup-the-system-cannot-find-the-path-specified-error-0x80070003?forum=w7itprogeneral
    Best regards,
    Frank Shen

  • I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need!  Anybody out there with a similar problem?  Help!

    I have a 160GB Hard Drive in my MBP and use VMWare Fusion and had a 60GB Virtual Machine running Windows XP. Deleted the Virtual Machine and CANNOT find the 60GB space I desperately need!  Anybody out there with a similar problem?  Help!

    Thanks - Of Course the first thing I checked and did.
    Disc Utility reads as follows:
    Capacity : 159.18 GB (159,182,127,104 Bytes)
      Format : Mac OS Extended (Journaled)  Available : 11.47 GB (11,472,896,000 Bytes)
      Owners Enabled : Yes  Used : 147.71 GB (147,709,231,104 Bytes)
      Number of Folders : 139,540  Number of Files : 511,832
    Activity Monitor(Disc Usage) shows something quite interesting.  Mac HD and Ramanan (Main User) - My hard drive is only 160GB!  Would the retired engineer gentleman please note as well.  Many thanks. Rams

  • I bought the Adobe Exportpdf license and cannot find the link how to use it

    I bought the Adobe Exportpdf license and cannot find the link how to use it

    Hi Pedro,
    To use the ExportPDF service, simply visit http://exportpdf.acrobat.com and click 'Sign in' at the top right corner.  Enter your Adobe ID (email address) credentials to log into the service.  As ExportPDF is web-based, you simply utilize the tool through your web browser.  After you're logged in, you should see the ExportPDF interface, with a button saying 'Select PDF file..' to get the process started.
    You may also access ExportPDF via Adobe Reader by choosing File > Save as Word or Excel Online.
    Please let us know if you have any questions.
    -David

  • PPT has found an error and cannot save the file in Microsoft Powerpoint2010

    I have been working in 2010 for 6 months and this is the 3rd time I have experienced this error.  I am using my own 2010- created, macro-enabled template - I want to save the file but I get an error message stating PPT
    has found an error and cannot save the file. 
    This has happened on both newly created files using this template, and files previously successfully saved.  The template has been used without error many, many times.
    I have on occassion been able to save as a 97-2003 file and then resave (with some loss of function) as a 2010 macro-enabled file, on another occassion I was not able to do this and lost some work.
    Copying into a new document didn't solve the problem. Copying into a different template didn't solve the problem.
    Any ideas what is happening, and how I can stop it happening?
    Kind regards

    Hi,
    Have you tried saving the file in *.pptm format (basically this extension is for powerpoint presentation with macros)
    Maybe try Save As and see if you can save it under a different name.
    Once you get the file closed, then reopen PPT and go to Office Button | PPT Options | Resources. Run Office Diagnostics there.
    In addition, make sure you have a local printer driver installed and set as the default printer. And it really might fix the issue.
    Here's info on what to do:http://www.pptfaq.com/FAQ00952.htm
    Sincerely

  • I had to replace my hard drive. Need to re-install office and pages and cannot find the cds. Any help will be appreciated

    I had to replace my hard drive. Need to re-install office and pages and cannot find the cds. Any help will be appreciated

    Replacement System Discs can be obtained from Apple's Customer Support - US (800) 767-2775 for a nominal fee. You'll need to have the model and serial number of your Mac available.
    If you're not in the US, you may need to go through the regional Apple Store that serves your location to find the contact number - http://store.apple.com/Catalog/US/Images/intlstoreroutingpage.html
    Or you can purchase the applications from an Apple retail outlet, App Store or the Apple online store.

  • Labview executable error - system cannot find the file specified

    Hi
    I am trying to create a stand-alone application and I'm getting the error message below:
    "System cannot find the file specified"
    This error message occurs when I run the setup.exe. Does any one know why this is happening? I've also attached the error message screenshot.
    Thanks
    Attachments:
    Specified file error.png ‏34 KB

    What type of hardware are you using? What do you mean by stand alone? Are you using any RIO device? (Just trying to understand)
    The best solution is the one you find it by yourself

  • I purchased an iPad 3 this summer.  I have looked and searched that thing and cannot find the sim card tray - where is it????

    I purchased an iPad 3 this summer.  I have looked & searched that thing and cannot find a sim card tray, where is it?? does it have one??

    If your iPad does not look like this on the side, you have the Wi-Fi only iPad.

  • I had icloud set up perfectly well on my vista operating system, but when it had to be reconfigured I lost my icloud and cannot find the version I need to set up again.

    I had icloud set up to work perfectly between my vista PC, ipad and iphone.  However when I had to have a service and reconfigure on my PC, I lost the connection with icloud and cannot find a download.  Is there one available?

    Go here: http://support.apple.com/kb/DL1687.

  • HT4061 I bought an ipad mini and cannot find the serial number?

    I have vbought an i pad mini and cnanot find the serial #.INstructions say if i tap home screen. But there is no home screeb. They also say it  is negraved on the back. But nothing is engraved on the back. They say if I have th eoirignal nox I can find it (whatever it is) above the  bar codes. But there are 4 long numbers. I have no idea which is which. Help!

    Serial Number
    http://support.apple.com/kb/HT4061
    Sign in to My Support Profile to get Serial Number
    https://supportprofile.apple.com/

  • Compile Error: ld: cannot find -lgcc C compiler cannot create execut

    I've just get my system change to arch64 from arch32.
    When I try to build wine. It shows:
    checking for C compiler default output file name...
    configure: error: C compiler cannot create executables
    See `config.log' for more details.
    make: *** No rule to make target `depend'. Stop.
    ==> ERROR: Build Failed. Aborting...
    and see this part of config.log
    gcc: '-V' must come at the start of the command line
    configure:2366: $? = 1
    configure:2389: checking for C compiler default output file name
    configure:2416: gcc -m32 -march=x86-64 -O2 -pipe conftest.c >&5
    /usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/./libgcc.a when searching for -lgcc
    /usr/bin/ld: skipping incompatible /usr/lib/gcc/x86_64-unknown-linux-gnu/4.1.2/./libgcc.a when searching for -lgcc
    /usr/bin/ld: cannot find -lgcc
    collect2: ld returned 1 exit status
    configure:2419: $? = 1
    configure:2457: result:
    configure: failed program was:
    | /* confdefs.h. */
    | #define PACKAGE_NAME "Wine"
    | #define PACKAGE_TARNAME "wine"
    | #define PACKAGE_VERSION "0.9.22"
    | #define PACKAGE_STRING "Wine 0.9.22"
    | #define PACKAGE_BUGREPORT "[email protected]"
    | /* end confdefs.h. */
    |
    | int
    | main ()
    | {
    I run "ld -lgcc"
    [root@sgu wine0922]# ld -lgcc
    ld: cannot find -lgcc
    When i was building another package, i get this err info:
    conftest.cc:14:28: error: ac_nonexistent.h: No such file or directory

    wine needs a 32bit environment to run/get compiled or a multilib x86_64 system. watch the gcc -m32 call - so no way without touching the pure 64bit philosophy behind arch64!

  • I just bought Photoshop Elements 13 and cannot find the Magic Extractor.  Where is it?

    I watched a video online and thought this would be a really cool tool to have since I'm preparing images for Amazon and they require a white background on the main product photo.  I thought buying Version 13 would be smarter than 12 or less as it would be more up-to-date, but I cannot find it!  So frustrated and overwhelmed at this point.

    Yes, the magic extractor has been removed from PSE12 and not reintroduced in PSE13.
    Elements: Magic Extractor in version 12?

Maybe you are looking for