FPGA dynamic read of memory item

I am using a flex rio PXIe-7961R/NI-6585. When I try to complie my code i get
An internal software error has occurred. Please contact National Instruments technical support at ni.com/support with the following information:
Error -61175 occurred at
Possible reason(s):
LabVIEW FPGA: FPGA FIFO Node not wired with constant FPGA FIFO Name.
=========================
LabVIEW FPGA: FPGA FIFO Node not wired with constant FPGA FIFO Name.
I am trying to read from block memory in a subvi that gets a memory name passed into it. I get the error in the writeTxFifo vi. The tlmMessageBuilder is the calling the vi. Any ideas on how to fix this problem?
Attachments:
tlmMessageBuilder.vi ‏56 KB
writeTxFifo.vi ‏41 KB

I just took another look at the VI you posted.
The error message you're getting probably has nothing to do with the case structure. The error is a result of using a control as the source of your reference rather than a constant.
National Instruments
FlexRIO Product Support Engineer

Similar Messages

Changing ISA Product Catalog VIEW ITEMS Dynamically - Read COMM_PCAT_VITM

Hi,
I need to change the ISA Product Catalog Items Dynamically. Depending on certain criteria, after the user logs into the ISA, the items in a User VIEW needs to be filtered.
I found that the View Items are stored in table COMM_PCAT_VITM. Also after Debugging ISA, I found that the following FUnction Module is used to read the View details : COM_PCAT_VIEW_GETDETAIL_O
However I did not find which FM is used to read the VIew ITEMS .. that is Table COMM_PCAT_VITM.
If I can find the FM, I can enhance this FM to filter the Items Dynamically...
Second Question is ...whats the GUID field in the Table COMM_PCAT_VITM ?
Thanks

Hello WDA Portal,
In the ISA, the catalog search and display list are done through RFC calls to TREX directly. Only the attribute names and product detail are read from theCRM system. So, if you are trying to manipulate the Catalog search and results, you have to do it in the Java layer only.
You have to extend / modify the web flow and work with the following classes.
<li>Catalog Business Object,
<li>WebCatInfo,
<li>CatalogFilterFactory,
<li>IFilter,
<li>WebCatItemList,
<li>IQueryStatement,
<li>IQuery
<br>
The enhancement is not for the faint hearted. You must have a development environment setup and you must have good developers with you to do this type of stuff.
Easwar Ram
http://www.parxlns.com

Memory item as shift registers

Hello, I am new in LabVIEW Programming. Can I use memory item to make a large array of shift register inside a SCTL in LabVIEW FPGA? Large array of shift register consumes a lot of slices when i compile it. Can data be read and written(in different addresses) on a memory item in a single clock cycle? thank you

I am not sure I understand exactly what you are asking. If you are trying to use a Memory to implement a shift register you can certainly do that but I would recommend using a FIFO instead.
If you are trying to use an Array, Loop, and Shift Register to implement a memory that will work as well. Note that only LabVIEW FPGA 2012 and newer can infer block ram from this construct. In older versions the array will always be implemented in the standard FPGA logic using registers and utilizes more resources.
The above diagram will infer a block ram for larger array sizes.
Either way, the read and write addresses do not have to be the same in each clock cycle.

How to insert horizontal line dynamically after every line item in sapscrip

Hi All,
I have to insert a horizontal line after every new item in sap script.
How to do this .
In some material there is2 line item or in other line item it ay be more .
How to insert horizontal line dynamically after every line item
Point will be rewarded
Regards
Niraj

Hi Niraj,
You can get your work done by keeping the horizontal line (&ULINE&) after all the item level fields, in this case once each item line is written you will get a horizontal line.
In case you have different fields for the item lines which are optional (not printed every time) then you can have them in an IF....ENDIF condition and below the endif use a horizontal line.
Some thing like this:
/E ITEM_HEADER
IL <TI>Item,,Material,,Description</>
IP <TI>,,,,Quantity,,,,Price,,Price unit,,,,,,Value</>
/ &ULINE(71)&
Let me know if this helps, else please describe your problem with an example.
Luck.

Dynamically changing the list item based on another list item

Hi all,
I have two fields that are list items.
First list item contain two list values: Regular and One-time
In second list item if user select the Regular then below values should appear:
Daily wages
Activity Linked
Fixed Contracts.
Contract Staff
Outsourced
if user select the one-time then below values should appear:
Projects
Repairs & Maint.
Please do the needful.

First list item contain two list values: Regular and One-timeYou simply need to add a conditional check to the When-List-Changed (WLC) trigger to see which value was selected. Then, as Manu suggests, you will populate the Poplist based on the selected value.
For an example of how to dynamically populate a Poplist item, take a look at: Forms: How to Dynamically Populate a Poplist.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Dynamically create document type Item Attribute using WF_ENGINE.AddItem API

Hi
Is WF_ENGINE.AddItem API , supported to create document type Item attributes dynamically ? If yes how do we set the display name of the attribute. If no then is there is any other method to dynamically create document tyoe item attribute?
Thanks

Hi,
If the document is stored on a file system, then I would replace the message body with a PL/SQL document which includes links to the files as straightforward URLs. There would be no need to include them in the Workflow in any way. For example, I recently worked with a client where all the (file) attachments made within eBusiness Suite were then migrated into Oracle Universal Content Management and the attachment was replaced with a URL to the new document. Any notifications now just reference the URL link to the document within the document management system in an HTML notification. While the processing is going on, the user is given the list of files that exist as attachments, but no links because the document is being processed by the management system.
If the attachments are going to be stored in Workflow as documents, you won't be able to change the display name though - display name is set for the attribute on the message, not for each specific notification. Changing the value of the display name for the message would impact all notifications that use that message, which isn't what you want.
What you need is to dynamically build the notification (either using PL/SQL or OA Framework) and include a list of attachments in the notification. This may be a direct link to the document (either in a document management system or on a file system somewhere) that you can render as a URL, or a link to code that can retrieve the document from the database and serve that to the user. This is not a straightforward piece of work.
If this is purely internal, you might be better off having a custom form / screen which displays the different documents, and link to that from the notification. Or you could link to a standard form for the transaction and have the users pick up the attachments directly from the transaction.
HTH,
Matt
WorkflowFAQ.com - the ONLY independent resource for Oracle Workflow development
Alpha review chapters from my book "Developing With Oracle Workflow" are available via my website http://www.workflowfaq.com
Have you read the blog at http://www.workflowfaq.com/blog ?
WorkflowFAQ support forum: http://forum.workflowfaq.com

Dynamic action to change item label

Hi All,
How can I use dynamic action to change item label?
thanks.

Hi,
fac586 wrote:
Why and when do you want to dynamically change a label? This would have a detrimental effect on usability and accessibility.
Consider a visually impaired user of your app using a screen reader. The screen reader identifies a checkbox labelled "Free Cake". They like the sound of that, so navigate to the checkbox to tick it. Your dynamic action fires when it gets focus and changes the label to "Give all my money to Fadi".I think this would confuse even a sighted user! I don't know the OP full requirements or constraints but I can bet the OP does not want to change the item label when the user navigates to it.
I have to say that I don't like forms that change as the user enters data. I think that enabling and disabling fields is OK, but not hiding or showing or changing labels or field types.
In any case, if you have to do it, an alternative to changing an item label is to have 2 separate items: one hidden and one shown. Then, using some triggering event, you can hide one and show the other.
Because there are built-in dynamic actions to hide and show items but not to change item labels, one might thing that one approach is more acceptable than the other. However, if those 2 separate items occupy the same spot in the page, from a user point of view (or screen reader for that matter) I don't see any difference between those two approaches (in my view, both bad practices.)
And because of its lots of nested tables, lack of headings etc, apex pages are not screen-reader friendly anyway... This is an interesting plugin for firefox that shows how your page would be read by a screen reader:
http://www.standards-schmandards.com/projects/fangs/
fac586 wrote:
You can use an "execute javascript" dynamic action type to do it.Yes, you can. But should you?I don't know. As I mentioned above, I don't like the idea. However, as I also mentioned above, I don't know anything about the OP constraints or requirements.

Unable to Read Calendar List Items through CAML

Hi All,
* I have created two columns in calendar one Year and other Month.When new event is added in calendar through (Item Added) event receiver I am setting the values to this columns as Name of Month to(February) and Year as(2014) .So that I can fetch the
data easily based on month and year
* Through this Columns Secondly when I try to fetch the data to count number of items of particular month and year using caml query I am getting error as below .
"Error:One or more field types are not installed properly. Go to the list settings page to delete these fields."
*My below caml code is working fine if i applied to custom list,But not to calendar.Can any one help me for what reason I am unable to fetch data
Code
string year="2014";
string month="February";
SPSite mysite = SPContext.Current.Site;
SPWeb myweb = mysite.OpenWeb();
SPList mylist = myweb.Lists["Calendar"];
SPQuery myquery = new SPQuery();
myquery.Query = @"<Where>
<And>
<Eq>
<FieldRef Name='Year'/>
<Value Type='Text'>" + year + @"</Value>
</Eq>
<Eq>
<FieldRef Name='Month' />
<Value Type='Text'>" + month + @"</Value>
</Eq>
</And>
</Where>";
SPListItemCollection totaltiems = mylist.GetItems(myquery);
Label1.Text= "Total Number of Items is "+" "+totaltiems.Count.ToString();
Thanks, Quality Communication Provides Quality Work. http://siddiq-sharepoint2010.blogspot.in/ Siddiqali Mohammad .

Hi,
According to your post, my understanding is that you got an error when read calendar list items using CAML.
I created two single line of text columns in the Calendar( Year and Month), then add items in the Calendar to check with your code. The CAML query worked well as below.
string year = "2014";
string month = "February";
using (SPSite oSiteCollection = new SPSite("Your site URL"))
using (SPWeb myweb = oSiteCollection.OpenWeb())
SPList mylist = myweb.Lists["Calendar"];
SPQuery myquery = new SPQuery();
myquery.Query = @"<Where> <And> <Eq> <FieldRef Name='Year'/> <Value Type='text'>" + year
+ "</Value></Eq><Eq>+ "
+ " <FieldRef Name='Month' />+ "
+ " <Value Type='text'>" + month + "</Value>+ "
+ " </Eq> </And></Where>";
SPListItemCollection totaltiems = mylist.GetItems(myquery);
Console.WriteLine( "Total Number of Items is " + " " + totaltiems.Count.ToString());
Console.ReadLine();
Which type of the two columns in your Calendar? Were they text type?
Are you sure the field name(<FieldRef Name='Year'/>,
<FieldRef Name='Month' />) is same as internal name?
We should only use internal name while refrencing columns in CAML query. If you have space In you column , replace it with "_x0020_", such as
News_x0020_Category.
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

I can't print an item,and each time I attempt to do so a message reads that the item is either spam

I can't print an item,and each time I attempt to do so a message reads that the item is either spam or contains a virus.
What gives?

What is the format of the item you are attempting to print (via ePrint?)? Is it a supported format? See an updated list here.
Although I am an HP employee, I am speaking for myself and not for HP

Binary Search in Dynamic Read

Here is the code
      read table <fs_it_crv> assigning <fs_wa_crv> with key
                                  ('objty') = wa_plfh-objty
                                  ('objid') = wa_plfh-objid
                                  binary search.
If i use binary search system giving error while activating as
You cannot use explicit or implicit index operations on tables with
types "HASHED TABLE" or "ANY TABLE". "" has the type "ANY
TABLE". It is possible that .
How could i use Binary search in dynamic read
a®

Hello,
how do you create your internal table "<FS_IT_CRV>" ?
i found this thread [here|Need help regarding Dynamic Read Table statement;.
You can try the code lines of David Klotz.
If you insert a sort statement before read and change read adding binary search it might work.
SORT <gt_itab> BY (ge_key_field1) (ge_key_field2) (ge_key_field3) .
* Finally, perform the search
READ TABLE <gt_itab> ASSIGNING <gs_result>
          WITH KEY (ge_key_field1) = pa_cond1
                   (ge_key_field2) = pa_cond2
                   (ge_key_field3) = pa_cond3 BINARY SEARCH.
I tried the following code in my own program and it works:
SORT <wlf_t_data> BY (c_trkorr).
read table <wlf_t_data> assigning <wlf_header> with key
         (c_trkorr) = 'DRR' binary search.
Where   <wlf_t_data> is a dynamic table created by method create_dynamic_table of class cl_alv_table_create.
Cordialement,
Chaouki

Is there a way to read All UI Item Values through XML?

We do a lot of validations before adding or updating AR documents in SAP 2007 (soon to be 8.8). Since these updates have not yet been sent to the database, we are reading the UI item values one by one off of the form, and this is slow to write and not much faster to run.
Is there a way to get the entire form, a Sales Order for example, as an XML document with the item values? The best we can find is by going to the File menu and choosing Export Form to XML. It gives a relatively concise XML file that includes the values for each item on the form. The only problem is that it saves it as a physical file on the file system.
So, is there any way to get the equivalent result of Export Form XML programmatically through the UI-API?
Thank you,
Mike

Hi Michael,
You can use the GetAsXML method of the form object:
e.g
SAPbouiCOM.Form F = SBO_Application.Forms.ActiveForm;
String XMLString = f.GetAsXML();
System.Xml.XmlDocument XmlDoc = new XmlDocument();
XmlDoc.LoadXml(XMLString);
Regards, Lita

How to read Sales order Item Text of item node?

Hi Sap Guru's,
I have urgent requirement, i want to read Sales order item text of item node.
can anybody give detail code.
Thanks in Advance,
Venkat

hi venkat,
take a look at this code
data:
git_line type standard table of tline.
data:
gwa_head type thead,
gwa_line type tline.
data:
v_first type c.
CALL FUNCTION 'READ_TEXT'
EXPORTING
CLIENT                        = SY-MANDT
    id                            = '0002'
    language                      = sy-langu
    name                          = '1000000122000010'
    object                        = 'VBBP'
IMPORTING
    HEADER                        = gwa_head
tables
    lines                         = git_line
EXCEPTIONS
   ID                            = 1
   LANGUAGE                      = 2
   NAME                          = 3
   NOT_FOUND                     = 4
   OBJECT                        = 5
   REFERENCE_CHECK               = 6
   WRONG_ACCESS_TO_ARCHIVE       = 7
   OTHERS                        = 8.
loop at git_line into gwa_line.
at first.
    move 'X' to v_first.
endat.
if v_first eq 'X'.
    write: / gwa_line-tdline+10.
    clear v_first.
else.
    write: / gwa_line-tdline.
endif.
endloop.

Increasing Crashes "Read Only Memory Exception" HELP please!

Over the past month and a half I'm starting to get regular and increasing crashes, mostly in my Adobe CS3 programs with this error:
Read-only memory exception. A memory reference was made to an address that cannot be written to.
unresolvablePageFaultException
I am starting to get towards my wit's end and want to rule out hard drive or logic board problems. Today after I got this crash in Dreamweaver and Fireworks (for the first time in FW), all my programs stopped opening and responding. I am noticing in Activity monitor 2 continuous stalls:
175 UserEventAgent (Not Responding) 0.0 3 4.10 MB 722.06 MB
168 colormunkid (Not Responding) 0.0 1 8.20 MB 766.86 MB
Even after reboots.
Console said:
5/19/08 9:13:55 AM [0x0-0x182182].com.adobe.dreamweaver-9.0 2008-05-19 09:13:55.462 Adobe Crash Reporter[9245:10b] (null)
5/19/08 9:14:03 AM com.apple.launchd[152] ([0x0-0x183183].com.macromedia.fireworks[9240]) Exited abnormally: Segmentation fault
5/19/08 9:16:20 AM Acrobat[9259] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
Crash reporters say:
Version: Adobe Fireworks CS3 version "9.0.1.1213" (9.0.1)
Code Type: PPC (Native)
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x00000000935dde9c
Crashed Thread: 0
Application Specific Information:
* Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[NSCFType count]: unrecognized selector sent to instance 0x1283b740'
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0x24836e70
Thread 0 Crashed:
: Dreamweaver
Path: /Applications/Adobe Dreamweaver CS3/Dreamweaver.app/Contents/MacOS/Dreamweaver
Parent: WindowServer [84]
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0x283040ff

I am having a very similar problem with Dreamweaver 8 running
on OS X10.4.11.
If I choose passive FTP, Dreamweaver appears to upload a
file, when in fact the error logs reports that the file could not
be upload because it was not found, or because of permission
problems.
If I do not upload with passive FTP , Dreamweaver 8 crashes
& Dreamweaver 8 loses the site's root folder, informing me that
it cannot be found and I must use the manage sites feature to
recreate the cache for the site that was there.
If I use FETCH, no problem... all files are uploaded
successfully.
I recently had a hard drive failure on my Mac, had a new HD
installed by the folks at the Genius Bar, and thought perhaps my
new HD was buggy... however, now it seems there must a a
permissions problem built into the Dreamweaver FTP protocols.
I have not seen a patch for this, although when I reinstalled
the software, I did download all updates.
I know my reply offers no solutions, but I do thank you for
your post.

Dynamically read data from a txt document

I try to dynamically read data from a txt document
in swf
stop ();
var pafh=this;
import flash.events.*;
var Araray_id:Array =new Array();
var v_length:Number;
var myTextLoader:URLLoader = new URLLoader();
myTextLoader.dataFormat=URLLoaderDataFormat.VARIABLES;
myTextLoader.addEventListener(Event.COMPLETE, onLoaded);
function onLoaded(e:Event):void {
        Araray_id = e.target.data.araray_id.split(",");
        trace("Araray_id: "+Araray_id);
        v_length=Araray_id.length;
        trace("v_length: "+v_length);
        for (var i:Number=0;i<v_length;i++){
            pafh["Id_"+i]=new Array();
            trace("pafh[Id_+i]: "+pafh["Id_"+i]);
            var v_help:Object="id_"+i;
            trace("v_help: "+v_help);
            //pafh["Id_"+i]= e.target.data.v_help.split(",");????? Here stops the script
            //pafh["Id_"+i]= e.target.data.(v_help).split(",");????Here stops the script
            //pafh["Id_"+i]= e.target.data.[v_help].split(","); ????Here stops the script
        play();
myTextLoader.load(new URLRequest("myText1.txt"));
in text
araray_id=aa,bb,cc,dd,ee,ff
&id_0=aa1,aa2,aa3,aa4
&id_1=bb1,bb2,bb3,bb4,bb5
&id_2=cc1,cc2,cc3
&id_3=dd1,dd2,dd3,dd4,dd5,dd6
&id_4=ee1,ee2
&id_5=ff1,ff2
output
Araray_id: aa,bb,cc,dd,ee,ff
v_length: 6
pafh[Id_+i]:
v_help: id_0
TypeError: Error #1010: A term is undefined and has no properties.
    at skuskaceatarraybiforas3fromtext_fla::MainTimeline/onLoaded()
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at flash.net::URLLoader/onComplete()
Can you help me with this problem

More suggestions.
1. If you align naming conventions between data and your application - reading data could be practically a one-liner.
If you write pafh["id_" + i] (with small case i) instead of pafh["Id_" + i] (with capital case I) the function can be just:
function onLoaded(e:Event):void
          for (var prop:String in e.target.data)
                    pafh[prop] = e.target.data[prop].split(",");
          play();
2. If changing conventions is not feasible, here is another thing you can do:
function onLoaded(e:Event):void
          for (var prop:String in e.target.data)
                    pafh[prop.replace(/^\w/, String(prop.match(/^\w/)).toUpperCase())] = e.target.data[prop].split(",");
          play();

BB Curve 9220 not reading the memory card

Hello,
I have a Blackberry Curve 9220
v7.1.0.746 , Platform 9.50.0.80
1 week ago I was using this phone and that time i didnt have a memory card in this device. I opened wechat and it showed either to insert memory card or to disable usb mass storage in this device. I didnt have a memory card that time, so, i tried todisable the usb mass storage and I did that.
Today, I inserted a memory card in this device, it shows that "Media Card is presently not inserted in this device"
When I searched the internet I got some solutions. They showed that to enable mass storage mode and check media card support on.
I turned Media Support set to ON.
I have made sure that the media card is formatted and inserted properly.
BUT
When i pressed the option (BB Logo key) button , it didnt show the option to enable usb mass storage. It just showed these options : "Switch app" ,"Select Text" , "Save" , "Help" , "Close".
There is no option to enable usb mass storage and it is not reading the memory card
Please tell me what to do !
Thankyou

Hi Manabb04
Enable or disable USB mass storage mode
If you connect your BlackBerry smartphone to your computer using a USB cable but does not appear as a drive on your computer, you may need to activate the USB mass storage.
On the Home screen or in a folder, click the Options icon.
Click Device> Storage.
Press  > Enable USB mass storage.
If necessary, type the password for the smartphone.
Your smartphone appears as a drive on your computer.
To disable USB mass storage mode, press  > Disconnect.
BBM Channels PIN: C0007093A
Do not forget to give LIKE   Those people who help you and advise you about your doubts.  if the review has been SOLVED** # 4LL  #ÉliteRoad  Make a backup of your BlackBerry
BlackBerry Protect and BlackBerry Link constantly. #ichooseBlackBerry10 Gutijose14 Forums Veteran I

FPGA dynamic read of memory item

Similar Messages

Maybe you are looking for