Fra01 100 percent full/services down

can someone help in this
asmcmd 100 percent
deleted all archives
still database services are down
its urgent pls suggest me to make service up
pls

Make sure you really have space in the fra, and
alter system switch logfile;and backup the DB ASAP because after deleting archivelogs, you will not be able to use the previous backup to completely restore the db
Edited by: thtsang on Jun 16, 2011 12:53 PM

Similar Messages

  • Failed 3x crash service down

    I'm running Final Cut Studio 7. I have an Dual Quad Core Intel Xeon 2.66 Mhz Mac
    I'm using Leopard 10.5.8 Ever since I got Final Cut Studio 7 Installed, I have not been able to use Compressor. I have tried clearing the batch folder, repairing permissions, un-installing and re-installing Qmaster & Compressor.
    All I get is Failed 3x crash service down.

    Same problem here. But I am using final cut studio 2 (final cut 6.0.6, compressor 3.0.5). Running on MacBook Pro 2.33 dual core, OSX 10.6.3.
    In order to see the "Failed 3x crash" I have to manually start the batch monitor and click the icon:
    Job Type: Compressor
    Priority: High
    Time Elapsed: 2:26:20
    Time Remaining: 0:00:00
    Percent Complete: 100
    Status: Failed: 3x crash service down
    I tried to set destination to various disks - the source disk (usb) and the system disk (internal HD). Both failed.

  • My iPhone 5s with iOS 7.1 become very hot when charged almost reach 100% and will shut down itself.

    My iPhone 5s with iOS 7.1 become very hot when charged almost reach 100 % and will shut down itself. Then I need to off the power and let it cool down first before I can on the phone back. Please help me to solve this problem. Thanks.

    Hi Limfromsi,
    It is normal to an extent for the iPhone to get warm during charging. If your iPhone is currently in a case, you may want to try charging it without one and see if the issue occurs, as the design of the iPhone uses the exterior of the device as a cooling surface. For more information about iPhones and temperature, you may find the following article helpful:
    iOS devices: Keeping device within acceptable operating temperatures
    http://support.apple.com/kb/ht2101
    If you continue to have issues with your iPhone in the default config (no case, using the included original cable and power adapter), you may want to have your phone evaluated for service. The following page may be of use:
    Service Answer Center - iPhone
    http://support.apple.com/kb/index?page=servicefaq&geo=United_States&product=ipho ne
    Regards,
    - Brenden

  • IPhone 4s battery stuck at 100 percent. How do I get it back to normal?

    iPhone 4s battery stuck at 100 percent. How do I get it back to normal?
    Ever since the update, I am having issues with the battery. Phone shuts down while it still shows 100 percent battery life. Normally not a big deal because I don't use it all the time but lately an issue when I'm working in Manhattan and it shuts down while in the middle of conversation or emailing.
    I can't go around charging it every hour wondering what my battery life really is.
    Please help!

    My phone now is not working at all. It only works for a few minutes while it is plugged into the wall and then it shuts down and pops right back up showing it has 75% battery. It has been doing this since yesteday afternoon.
    I tried the reset and it is still acting up. Dreading having to take this to the Apple store since it is past the initial 90 days and I will probably get charged for it. :( Dont want to shell out money for a new one since I just got this one in October.
    Thanks for your help.

  • Compressor Crash Log for 3x crash service down

    I keep getting 3x crash service down when compressor fails. My previous work around was to reinstall everything and go back to Final Cut Studio 5.1 (Compressor 2.1, Qmaster 2.1). Well, I'm at a point where I want to get this worked out. Here is the compressor crash log - it looks like it crashes in Thread 4. I hope someone can tell me what this is and how to resolve it. If more info from the log is needed it can be supplied. Thanks.
    Command: compressord
    Path: /Library/Frameworks/Compressor.framework/Resources/CompressorTranscoder.bundle/ Contents/MacOS/compressord
    Parent: qmasterd [158]
    Version: ??? (???)
    PID: 344
    Thread: 4
    Exception: EXC_ARITHMETIC (0x0003)
    Codes: EXCI386DIV (divide by zero)
    Thread 0:
    0 libSystem.B.dylib 0x90009857 machmsgtrap + 7
    1 com.apple.CoreFoundation 0x908292f3 CFRunLoopRunSpecific + 2014
    2 com.apple.CoreFoundation 0x90828b0e CFRunLoopRunInMode + 61
    3 com.apple.Foundation 0x9262adc6 -[NSRunLoop runMode:beforeDate:] + 182
    4 com.apple.Foundation 0x9262acc2 -[NSRunLoop run] + 75
    5 com.apple.qmaster.SwampService 0x000c551b swamp::CSwampService::run(int, char const**) + 1819
    6 compressord 0x000028d3 0x1000 + 6355
    7 compressord 0x00001d7a 0x1000 + 3450
    8 compressord 0x00001c95 0x1000 + 3221
    Thread 1:
    0 libSystem.B.dylib 0x90019d3c select + 12
    1 com.apple.AECore 0x00217919 threadProc(void*) + 17
    2 libSystem.B.dylib 0x90023d87 pthreadbody + 84
    Thread 2:
    0 libSystem.B.dylib 0x90019d3c select + 12
    1 libSystem.B.dylib 0x90023d87 pthreadbody + 84
    Thread 3:
    0 libSystem.B.dylib 0x90019d3c select + 12
    1 com.apple.AECore 0x00217919 threadProc(void*) + 17
    2 libSystem.B.dylib 0x90023d87 pthreadbody + 84
    Thread 4 Crashed:
    0 libgcc_s.1.dylib 0x90bd068a __divdi3 + 382
    1 ...pple.compressor.transcoding 0x004ce157 Mpeg2TsMultiplexer::adjustTspDuration() + 195
    2 ...pple.compressor.transcoding 0x004d1241 Mpeg2TsMultiplexer::muxOneGroup(unsigned char*, int, int, unsigned char const**, int const*, int, unsigned char const**, int const*, signed char const*, MpegSystemsObject::PictureCodingExtensionInformation const*, signed char, int const*, int, int) + 5913
    3 ...pple.compressor.transcoding 0x004e6c9d M2V::MuxingClient::writeEncodedData(M2V::EncodedData const&) + 1925
    4 ...pple.compressor.transcoding 0x004dd643 M2V::EncoderImpl::encode_gop() + 1601
    5 ...pple.compressor.transcoding 0x0049a1f1 stomp::CM2VEncoderWrapper::encodeSequence(int, bool) + 437
    6 ...pple.compressor.transcoding 0x0049d084 stomp::CM2VTranscoder::run() + 4774
    7 ...pple.compressor.transcoding 0x00492093 stomp::CStompTranscoder::_processRequest(swamp::IServiceRequestRef const&) + 4933
    8 ...pple.qmaster.ServiceControl 0x01028ded swamp::CServiceControllerThread::runOnce() + 1213
    9 com.apple.AECore 0x0021a26c aecore::CThread::runThread() + 34
    10 com.apple.AECore 0x00217919 threadProc(void*) + 17
    11 libSystem.B.dylib 0x90023d87 pthreadbody + 84
    Thread 5:
    0 libSystem.B.dylib 0x90019d3c select + 12
    1 com.apple.AECore 0x0021a26c aecore::CThread::runThread() + 34
    2 com.apple.AECore 0x00217919 threadProc(void*) + 17
    3 libSystem.B.dylib 0x90023d87 pthreadbody + 84
    Thread 6:
    0 libSystem.B.dylib 0x90037697 machwaituntil + 7
    1 libSystem.B.dylib 0x90037319 sleep + 121
    2 com.apple.AECore 0x0023e6eb aecore::CIdleSleepPreventor::threadProc(void*) + 119
    3 libSystem.B.dylib 0x90023d87 pthreadbody + 84
    Thread 7:
    0 libSystem.B.dylib 0x90024427 semaphorewait_signaltrap + 7
    1 ...pple.compressor.transcoding 0x0053077b ThreadPool<M2V::SliceEncoder, M2V::SliceEncoder::Job, M2V::SliceEncoder::Factory>::workerthreadentry(void*) + 101
    2 libSystem.B.dylib 0x90023d87 pthreadbody + 84
    Thread 8:
    0 libSystem.B.dylib 0x90024427 semaphorewait_signaltrap + 7
    1 ...pple.compressor.transcoding 0x0053077b ThreadPool<M2V::SliceEncoder, M2V::SliceEncoder::Job, M2V::SliceEncoder::Factory>::workerthreadentry(void*) + 101
    2 libSystem.B.dylib 0x90023d87 pthreadbody + 84
    Thread 9:
    0 libSystem.B.dylib 0x90024427 semaphorewait_signaltrap + 7
    1 ...pple.compressor.transcoding 0x00530857 ThreadPool<M2V::SliceEncoder, M2V::SliceEncoder::Job, M2V::SliceEncoder::Factory>::workerthreadentry(void*) + 321
    2 libSystem.B.dylib 0x90023d87 pthreadbody + 84
    Thread 10:
    0 libSystem.B.dylib 0x90024427 semaphorewait_signaltrap + 7
    1 ...pple.compressor.transcoding 0x0053077b ThreadPool<M2V::SliceEncoder, M2V::SliceEncoder::Job, M2V::SliceEncoder::Factory>::workerthreadentry(void*) + 101
    2 libSystem.B.dylib 0x90023d87 pthreadbody + 84
    Thread 4 crashed with X86 Thread State (32-bit):
    eax: 0x00000001 ebx: 0x004ce0a2 ecx: 0x00000000 edx: 0x00000000
    edi: 0x00000000 esi: 0x00000000 ebp: 0xb022e1e8 esp: 0xb022e1b0
    ss: 0x0000001f efl: 0x00010246 eip: 0x90bd068a cs: 0x00000017
    ds: 0x0000001f es: 0x0000001f fs: 0x00000000 gs: 0x00000037

    No..this is not the crash log from when Logic Pro crashes..
    What we are looking for is.. when Logic crashes you will see a dialog box saying Logic as crashed and would you like to send a report to Apple.. press that and then copy and paste the log here...
    Here is an example of what it should look like...
    https://discussions.apple.com/thread/5380263?start=15&tstart=0
    However, what you posted is actually full of issues such as corrupted data with your Mail program... and various other errors going on with file operations. Have you repaired your permissions recently and checked the disk for errors via the disk utility? If not I highly recommend you do so....

  • CSS Service Down - Why?

    I am setting up a basic service on my CSS but it is showing as DOWN even though I can reach it fine directly and from the CSS.
    I'd appreciate any hints on why. I am running sg0810106 (08.10.1.06) on a CSS 11501. Other services on the same backend subnet are working fine.
    Here is the service definition and status:
    CSS11501# sh run service vmi-82-100-8000
    !************************** SERVICE **************************
    service vmi-82-100-8000
      ip address 10.10.82.100
      protocol tcp
      port 8000
      keepalive type tcp
      keepalive port 8000
      active
    CSS11501# sh service vmi-82-100-8000   
    Name: vmi-82-100-8000   Index: 37   
      Type: Local            State: Down
      Rule ( 10.10.82.100  TCP  8000 )
      Session Redundancy: Disabled
      Redirect Domain: 
      Redirect String:
      Keepalive: (TCP-8000   5   3   5 )
      Keepalive Encryption:      Disabled
      Last Clearing of Stats Counters: 10/21/2010 07:24:59
      Mtu:                       1500        State Transitions:            0
      Total Local Connections:   0           Total Backup Connections:     0
      Current Local Connections: 0           Current Backup Connections:   0
      Total Connections:         0           Max Connections:              65534
      Total Reused Conns:        0        
      Weight:                    1           Load:                         255
      Weight Reporting:          None       
    CSS11501#
    Debugging in the CSS seems to indcate the service should be up:
    CSS11501(debug)#  icp probe service  vmi-82-100-8000
    Probing 10.10.82.100:8000(-) KeepAlive probe..
    IP Address:       10.10.82.100
    Port:             8000
    URL:              /
    HTTP Version:     1.1
    Server Model:     Apache/2.2.9 (Unix) mod_ssl/2.2.9 OpenSSL/0.9.8h
    Server Date:      Thu, 21 Oct 2010 16:11:37 GMT
    HEAD Response:    404 Not Found
    HEAD Support:     Yes
    Persistence:      Yes
    Keep-Alive:       Yes
    Request Depth:    100
    TBR:              5
    Connect Time:     1 ms
    Rqst/Rsp Time:    4 ms
    Pipeline:         No
    SSL:              No
    CSS11501(debug)#  icp probe host 10.10.82.100      
    Probing 10.10.82.100:80(-) KeepAlive probe..
    IP Address:       10.10.82.100
    Port:             80
    URL:              /
    HTTP Version:     1.1
    Server Model:     Apache/2.2.3 (Unix) mod_ssl/2.2.3 OpenSSL/0.9.8h
    Server Date:      Thu, 21 Oct 2010 16:12:34 GMT
    HEAD Response:    403 Forbidden
    HEAD Support:     Yes
    Persistence:      Yes
    Keep-Alive:       Yes
    Request Depth:    100
    TBR:              5
    Connect Time:     1 ms
    Rqst/Rsp Time:    13 ms
    Pipeline:         No
    SSL:              No

    Hi,
    When you say "I can reach it fine directly and from the CSS." I'm assuming you mean ICMP reach correct?
    From your PC when you do C:> telnet 10.10.82.100 8000 what do you get?
    ICP probe is not a good test here as it's trying to reach the site with a HTTP HEAD and not getting a response as shown in the output..
    HEAD Response:    404 Not Found
    HEAD Response:    403 Forbidden
    Is this a HTTP service that you're trying to probe?
    Are you able to connect using the command:
    CSS11503(config) socket connect host 10.10.82.100 port 8000 tcp
    Regards
    Pablo

  • No service - Reboot - Full service

    I typically get 5 bars of service indication on my daily commute to/from work. But strangely I have noticed at least 2 times thus far that the phone says no service. I power down the phone and restart then it's back to full service. One occasion happened at home and I did not move. Today, I was listening to the iPod part of the phone when I noticed the No Service indication.
    Any one else experience this?

    My Iphone will lose cell service, then start searching and never find service. It will then display No service. At this point it won't recover and will have to be completely powered down and powered back-up. This has happened at least 5 times. I took it to the Verizon store and the tech told me to synch to iTunes and update the firmware. This was about the time that there was an update on the Feb. 10th. I did as requested but the problem reoccured again this week. I took the Iphone back to the Verizon store without rebooting to show them the problem with No service displayed and the iPhone not "self-recovering". The person behind the counter wanted to do a complete wipe and have me resynch it at home to correct the problem. At that moment another person came in with the exact same problem. I asked the Verizon agent if anyone else has reported the problem and she said yes a few people. Coincidentally, the other person in the store with the problem had bought the Iphone off the initial pre-sale. My Iphone was also bought off the pre-sale. Is there a coincidence? I plan on doing the complete reset (erase all content and settings) tonight and see if that corrects the problem. It would be interesting to hear if anyone else is experiencing the same problem.

  • My weather widget keeps saying "weather offline" when im on wifi or have full service?

    on my iphone 4 in the notification centre, my weather widget says "weather offline" sometimes, most of the time is shows the weather, but sometimes it is offline even when im on wifi or have full service. its so annoying. how can i fix this?

    I'm seeing it too, and I know of no fix. So it's not just you. And, I'm in the US so it's not a problem in your country only.
    I have found no pattern as to why I get "Weather Offline" but other times it's updated just fine.
    Sometimes the Weather app refuses to update the local weather, other times it gets updated. I assume the issues are related. All the other weather locations I create in the app are updated, so I know it's not the weather server that's the problem. It's just the local weather in the app and notification center (or centre!)
    Guess it's another iOS 5 bug. Let's hope it gets fixed in the next release.

  • A process by the name of avgcmgr is loading the CPUs by up to 100 percent. At least 5 of them have appeared on the activity monitor. I've removed them with forced quit but they return! How do I permanently get rid of them? CPUA temp is now 194F.

    A process by the name of avgcmgr is loading the CPUs by up to 100 percent. At least 5 of them have appeared on the activity monitor. I've removed them with forced quit but they return! How do I permanently get rid of them? Three of these processes has now driven the CPUA temp to 194F.
    Ray

    Hi Ray-
    I'm having the exact same problem and have searched the web for hours looking for a solution (multiple spawned avgcmgr processes that consume cpu).
    Did you find any solution?
    Thanks so much!
    Steve

  • HT1212 i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?

    i havnt changed my passcose and using the same passcode which i have been using since ages , its still not working, and i am 100 percent sure i am using the correct passcode ?.,

    Either way the result is the same... if you forgot (or don't know) your passcode, restore the device from backup on the last computer it was synced with when the passcode was turned on... this will remove the passcode. If you do not have access to the last computer it was synced with, you will have to force it into recovery mode & restore as a new device.

  • Usage of BODS Functions (NVL,DECODE...) are stopping the FULL PUSH-DOWN

    Hi,
    It seems that the usage of BODS Functions like NVL and DECODE are leading to the partial PUSH-DOWN to the database.
    Is there any way to achive to the FULL PUSH DOWN (INSERT INTO DBTABLENAME)?
    Regards,
    Sudhakar

    Hello
    The optimiser determines if the whole dataflow can be pushed-down.  NVL and DECODE can be pushed-down to most databases, so its something to do with how you've built the dataflow.
    Things that stop full push-down
    1 - custom functions
    2 - complex statements
    3 - datatype conversions
    3 - complex dataflows with many transforms
    4 - some specific tranforms (DQ, pivot,etc.)
    With a bit of trial and error, you should be able to figure out which is stopping yours.
    Michael

  • OAM alerts setup for Concurrent services down using workflow mailer

    Hi,
    We have ORacle Ebiz 12.0.6 with 10.2.0.4 database.
    Can some one please provide details how to end notification email for Concurrent services down using OAM in R12 with workflow.
    I have done the setup in clone with workflow up and running... and have also setup the alerts for example say:
    Service manager ---Down,Up in OAM through sysadmin user but when i bring down the Service manager form
    Concurrent manager administer form ...No email notifications are fired.
    Please share knowledge on this issue...
    Help is appreciated
    Regards,
    Milan

    Can some one please provide details how to end notification email for Concurrent services down using OAM in R12 with workflow.
    I have done the setup in clone with workflow up and running... and have also setup the alerts for example say:
    Service manager ---Down,Up in OAM through sysadmin user but when i bring down the Service manager form
    Concurrent manager administer form ...No email notifications are fired.Have you verified your Workflow setup before trying to troubleshoot the alert issue about the CM?
    How to Perform a Meaningful SMTP Telnet Test to Troubleshoot Java Mailer For Sending Email Notifications [ID 753845.1]
    Example Of Configuring Workflow Java Notification Mailer With Oracle Applications [ID 249957.1]
    Oracle Workflow Release 12 Diagnostics [ID 469822.1]
    Oracle Workflow ATG Support: R12 Java Mailer Setup Diagnostic Test [ID 748421.]
    Thanks,
    Hussein

  • In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. Help

    In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
    I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
    I am running a 64 bit version of Photoshop from the CS6 Masters Collection
    I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
    The document size is 2100 by 1500 Pixels at 300 PPI   only two layers

    In Photoshop CS6 Hue Saturation does not work with forground/background Jitter set at 100 percent no change in color is observed. I have Added a screen Shot of the Brush settings and a demonstration of what the brush produces.
    I also notice That when I make a pattern of a single color, when I fill a selection with the pattern I get a rainbow of different colors.
    I am running a 64 bit version of Photoshop from the CS6 Masters Collection
    I am on a PC with a Intel i7 1366 4 physical cores and 8 threads, 24 Gig of DDR memory, A Crucial 512 Gig SSD and a NVIDIA GTX 570 with 2 Gig of memory.
    The document size is 2100 by 1500 Pixels at 300 PPI   only two layers

  • Transcoding Failure when using H.264 (3x crash service down)

    I am compressing a video for the web. The original video is 720P DVCPro HD 23.98fps with exactly 2 minutes and 30 seconds length. I'm trying to compress it down to 480x270 (16:9) with H.264 using Compressor 3.0.1. For some reason it keeps on giving me this Failure with error code (3x crash service down). Any help in resolving this problem. Thanks

    hey L. Steele. Thanks for the info. I was finaly able to solve the problem. For some reason Compressor doesn't like DVCPro HD's frame and pixel size. This is what I did to resolve this issue. First the problem. When I bring in DVCPro HD media into Compressor, it is recognizing it as 960x720, which is correct but FCP handles it properly and views it as 1280x720 for that widescreen look. When I compress it as 50% source, it outputs the video as 480x360 which results in squashed picture. If I select custom 16:9, to get to 480x270, it gives me those errors. To solve this issue, I exported out of quicktime as 10-bit uncompressed HD file which resulted in 1280x720 pixel. I brought that back into compressor and it finally worked. I was able to get 480x270.

  • TS3367 phone does not always  ring. I have full service. All sound settings are working.

    phone does not always  ring. I have full service. All sound settings are working.

    Follow basic troubleshooting found in your user Guide for your phone.
    http://manuals.info.apple.com/en_US/iphone_user_guide.pdf
    Reset, restore, Service.
    http://support.apple.com/kb/HT1430
    http://support.apple.com/kb/HT1414

Maybe you are looking for