Framemaker 9 PDF exports with red boxes around text areas

I have a doc, made in FM 7, using version 9
When I make a PDF i get boxes around some of the text. It wasn't there during FM design.
example
(see red)
Please help

AxialInfo wrote:
you might consider saving the FM file as MIF and then looking at the MIF using the wonderful freebie MIFBrowser, from Graham Wideman, from here:
Wideman Adobe FrameMaker Topics
to find the problem area do a search for the string that is in the title
"Downblast Centrifugal
Exhaust Ventilator
Roof Mounted
Belt Drive"
although just pasting it here it looks like you might have soft carriage returns in it which will make it necessary to just search for the two-word segments.
After you find the phrase, use the left navigation area to walk "up" the MIF file, looking for the specific structure that those words are in (is it a text box, or rather a graphic frame inside a text box, correct?) Is this an anchored frame, or is it just floating? If it's anchored, where is it anchored?
In the MIF, see if you can identify any odd sounding properties of the text box or graphic frame. The MIF reference manual is a PDF found in the FM documentation folder.
Also, one other possibility is that there's something funky with the red swash that goes across the page that's somehow "contaminating" the text frame. What kind of graphic type is the red swash? Could you take a copy of the FM file and remove the swash and then make a PDF, to see if that solves the red outline.
edit: additional questions: are the swash and the text frame on the body page or on the master page? When Arnis suggested checking for graphics behind the text frame, did you also check the master page(s) as well as the body pages?
Sheila
I tried the program:
<TextFlow
<Notes
> # end of Notes
<Para
  <Unique 1291794>
  <Pgf
   <PgfTag `Body'>
   <PgfUseNextTag No>
   <PgfNextTag `'>
   <PgfAlignment Right>
   <PgfFIndent  0.0">
   <PgfLIndent  0.0">
   <PgfRIndent  0.0">
   <PgfFIndentRelative No>
   <PgfFIndentOffset  0.0">
   <PgfTopSeparator `'>
   <PgfTopSepAtIndent No>
   <PgfTopSepOffset  0.0">
   <PgfBotSeparator `'>
   <PgfBotSepAtIndent No>
   <PgfBotSepOffset  0.0">
   <PgfPlacement Anywhere>
   <PgfPlacementStyle Normal>
   <PgfRunInDefaultPunct `. '>
   <PgfSpBefore  0.0 pt>
   <PgfSpAfter  0.0 pt>
   <PgfWithPrev No>
   <PgfWithNext No>
   <PgfBlockSize 1>
   <PgfFont
    <FTag `'>
    <FPlatformName `W.Arial.R.700'>
    <FFamily `Arial'>
    <FVar `Regular'>
    <FWeight `Bold'>
    <FAngle `Regular'>
    <FEncoding `FrameRoman'>
    <FSize  14.0 pt>
    <FUnderlining FNoUnderlining>
    <FOverline No>
    <FStrike No>
    <FChangeBar No>
    <FOutline No>
    <FShadow No>
    <FPairKern Yes>
    <FTsume No>
    <FCase FAsTyped>
    <FPosition FNormal>
    <FDX  0.0%>
    <FDY  0.0%>
    <FDW  0.0%>
    <FStretch  100.0%>
    <FLanguage USEnglish>
    <FLocked No>
    <FSeparation 0>
    <FColor `Black'>
   > # end of PgfFont
   <PgfLineSpacing Fixed>
   <PgfLeading  3.0 pt>
   <PgfAutoNum No>
   <PgfNumTabs 0>
   <PgfHyphenate Yes>
   <HyphenMaxLines 2>
   <HyphenMinPrefix 3>
   <HyphenMinSuffix 3>
   <HyphenMinWord 5>
   <PgfLetterSpace No>
   <PgfMinWordSpace 90>
   <PgfOptWordSpace 100>
   <PgfMaxWordSpace 110>
   <PgfMinJRomanLetterSpace 0>
   <PgfOptJRomanLetterSpace 25>
   <PgfMaxJRomanLetterSpace 50>
   <PgfMinJLetterSpace 0>
   <PgfOptJLetterSpace 0>
   <PgfMaxJLetterSpace 10>
   <PgfYakumonoType Floating>
   <PgfAcrobatLevel 0>
   <PgfPDFStructureLevel 5>
   <PgfLanguage USEnglish>
   <PgfCellAlignment Top>
   <PgfCellMargins  0.0 pt 0.0 pt 0.0 pt 0.0 pt>
   <PgfCellLMarginFixed No>
   <PgfCellTMarginFixed No>
   <PgfCellRMarginFixed No>
   <PgfCellBMarginFixed No>
   <PgfLocked No>
  > # end of Pgf
  <ParaLine
   <TextRectID 119>
   <String `Downblast Centrifugal'>
  > # end of ParaLine
> # end of Para
<Para
  <Unique 1291795>
  <PgfTag `Body'>
  <Pgf
   <PgfAlignment Right>
   <PgfFont
    <FTag `'>
    <FPlatformName `W.Arial.R.700'>
    <FFamily `Arial'>
    <FVar `Regular'>
    <FWeight `Bold'>
    <FAngle `Regular'>
    <FEncoding `FrameRoman'>
    <FSize  14.0 pt>
    <FUnderlining FNoUnderlining>
    <FOverline No>
    <FStrike No>
    <FChangeBar No>
    <FOutline No>
    <FShadow No>
    <FPairKern Yes>
    <FTsume No>
    <FCase FAsTyped>
    <FPosition FNormal>
    <FDX  0.0%>
    <FDY  0.0%>
    <FDW  0.0%>
    <FStretch  100.0%>
    <FLanguage USEnglish>
    <FLocked No>
    <FSeparation 0>
    <FColor `Black'>
   > # end of PgfFont
   <PgfLeading  3.0 pt>
  > # end of Pgf
  <ParaLine
   <String `Exhaust Ventilator'>
  > # end of ParaLine
> # end of Para
<Para
  <Unique 1291796>
  <PgfTag `Body'>
  <Pgf
   <PgfAlignment Right>
   <PgfFont
    <FTag `'>
    <FPlatformName `W.Arial.R.700'>
    <FFamily `Arial'>
    <FVar `Regular'>
    <FWeight `Bold'>
    <FAngle `Regular'>
    <FEncoding `FrameRoman'>
    <FSize  14.0 pt>
    <FUnderlining FNoUnderlining>
    <FOverline No>
    <FStrike No>
    <FChangeBar No>
    <FOutline No>
    <FShadow No>
    <FPairKern Yes>
    <FTsume No>
    <FCase FAsTyped>
    <FPosition FNormal>
    <FDX  0.0%>
    <FDY  0.0%>
    <FDW  0.0%>
    <FStretch  100.0%>
    <FLanguage USEnglish>
    <FLocked No>
    <FSeparation 0>
    <FColor `Black'>
   > # end of PgfFont
   <PgfLeading  3.0 pt>
  > # end of Pgf
  <ParaLine
   <String `Roof Mounted'>
  > # end of ParaLine
> # end of Para
<Para
  <Unique 1291797>
  <PgfTag `Body'>
  <Pgf
   <PgfAlignment Right>
   <PgfFont
    <FTag `'>
    <FPlatformName `W.Arial.R.700'>
    <FFamily `Arial'>
    <FVar `Regular'>
    <FWeight `Bold'>
    <FAngle `Regular'>
    <FEncoding `FrameRoman'>
    <FSize  14.0 pt>
    <FUnderlining FNoUnderlining>
    <FOverline No>
    <FStrike No>
    <FChangeBar No>
    <FOutline No>
    <FShadow No>
    <FPairKern Yes>
    <FTsume No>
    <FCase FAsTyped>
    <FPosition FNormal>
    <FDX  0.0%>
    <FDY  0.0%>
    <FDW  0.0%>
    <FStretch  100.0%>
    <FLanguage USEnglish>
    <FLocked No>
    <FSeparation 0>
    <FColor `Black'>
   > # end of PgfFont
   <PgfLeading  3.0 pt>
  > # end of Pgf
  <ParaLine
   <String `Belt Drive'>
  > # end of ParaLine
> # end of Para
> # end of TextFlow
I don't see the red in there
I made another pdf, after deleting the red bar (it's a eps.) and the reb boxes are still there
        I'm not using any master.
Thanks for the advice anyhow    
-Matt

Similar Messages

  • When i add text to PDFs and work on the file for awhile, my red added text starts to turn into red X's with a box around them. I have OCRs turned off, i have the latest update, and i have registered the product. What is happening to my text while i'm work

    When i add text to PDFs and work on the file for awhile, my red added text starts to turn into red X's with a box around them. I have OCRs turned off, i have the latest update, and i have registered the product. What is happening to my text while i'm working on these files? On top of this, my red arrows get moved around also.

    Hi ,
    Could you please update me with few details like what version of Acrobat are you using?
    What OS do you work on ?
    Do you experience this any particular PDF or happens with all of them?
    Did you try the same with turning on the OCR ?Please check the same and compare the outputs .Does that help you in anyway ?
    If the file is not confidential ,could you please share the file with us so that we can analyse it our end and revert you with the appropriate answer .
    Please share the file on [email protected] and please cc [email protected] as well .
    Regards
    Sukrit Dhingra

  • Hyperlinks show up with a box around them in Pages 2 PDF's.

    I am excited that web links now show up as hyperlinks. However, when I export a .pdf of the document, the hyperlinks end up with a box around them that makes them unreadable.
    Any idea how to get rid of the box. It doesn't show up in the original document. Only when you view invisibles.
    iBook 1.2 GHz PowerPC G4   Mac OS X (10.4.3)   1.26 GB DDR SDRAM
    iBook 1.2 GHz PowerPC G4     1.26 GB DDR SDRAM

    Dennis,
    you are right with your thought. I am thankful for every info to get better in every way. The posts in the Pages Discussions are easy to understand and so it should be. Wow, I can tell you, that this is very different to some 3D forums.
    After I know how to start the English version of Pages (thank you Matthias, this was a very good advice), I think most people can follow my explanations better, without the time of waiting for your title translations
    Frank.

  • Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy

    Looking to create editable PDF forms with drop downs and text boxes for use on a Mac computer and iPad. Which product do I need to purchase? Do not need anything fancy

    Basically you would need Acrobat. However, it is now also possible to create basic form fields using just the free Reader. In fact, I've been working on a tool that allows you to do it, so if you're interested in it please contact me privately.

  • Creating boxes around text....

    Hi,
    I'm hoping there is a better solution to this problem then what I've using.
    I would like to be able to create a box around text that is able to resize when increasing/decreasing font.
    My working solution is to create a text box with text then use direct selection tool to select the anchors and convert that into a shape, either a rectangle or rounded rectangle. This isn't bad since it allows an equal amount of space around the text but it does have problems. If the font size increases or decreases, the box remains the same. I have to use the Area Type Option to resize the box. Also, if I wanted to do this for lots of boxes then I have to select all of the individual anchors which will be time consuming.
    Is there a simpler solution?
    Thanks.

    Use the Selection Tool (Black Arrow) to select the text and then add a new Fill via the Appearance Panel.
    Move the new fill below the Characters item in the Appearance Panel
    With that fill highlighted choose Effect > Convert to Shape > Rectangle

  • Using text entry Box or Text are button

    Hi,
    How do I do these?
    using text entry box or text area widget.
    to describe:
    in my first slide I have text entry boxes for
        1. User name
         2. name of superior
         3. email of the superior
    let say: 1. refer to varialbe V_UserN
                 2. refer to V_sup
                 3. refer to V_emailS
    next slide would be a video
    next slide would be a text entry or a text area..this is where the user writes anything
         Text entry box with submit button
    What I want from this text entry box is..if the user doesnt write anything, upone clicking the submit button, the interaction wouldbe "please write a review on the text area"..if the user write something the something, the submit button will execute continue.
    how do I do this?
    next slide would be a text entry box or a text area..wherein the user write something based on question (this is not a quiz slide). The message would be sent to the superiors email. how do I do this?
    hope you can help me.
    Thanks

    To check if the user didn't write anything you'll have to compare the value of the associated variable of that TEB or Text Area with a user variable v_null. You have to create that user variable and just leave it empty.
    Have a look at my blog post:
    Where is Null?
    You'll have to create the custom question slide with standard objects. There is an mail widget included with Captivate, but didn't try out if you can insert the value of a variable as an email address.
    Lilybiri

  • PDF Export with Outlined Text, keeps non-outlined text box behind

    I work with a printer that needs all text outlined and the file saved into a PDF.
    Everytime I outlined my txt another box with non outlined text remains in the background.
    I have to go through my document deleting the non outlined text boxes...seriously.
    Anyone have a solution for this or have experienced anything similar?

    I agree with the gentlemen above, but have on occasion been forced to outline fonts for printers as I have no authority to choose which printers my company works with.
    Well put, Allison. I don't have any control over the printers used by my clients' clients, either. Or my clients' clients' clients. So occasionally the word comes back up the chain "All of the Arabic turned into question marks; please outline and resend."
    Speaking of which: the cases in which live text is duped when converted to outlines, with one copy remaining live, are in my experience 1) when tables are used, and 2) when almost any Middle East version of InDesign is used. I think that maybe the leave-live-text-behind bug/feature has been fixed in ME edtions of CC but I'm not sure.

  • Boxes around text in PDF's

    Sometimes I get a white hairline box around some text when I export to PDF doc. Is there any cure for that?

    That's a transpaerncy flattening artifact called "stitching" that normally doesn't show up in high-resolution printing. The obvious answer is to stop flattening the transparency by exporting to PDF using Acrobat 5 or higher comaptibility.
    If you search for stitiching in this forum you will find more information than you can read in a week.

  • Questions about PDF exporting with InDe CS5.5

    Hey all,
    A couple questions about exporting to PDF from the latest version of InDe.
    First, I have noticed that it seems to take a lot longer to get to a PDF. Any suggestions for how to speed up the process? It took 8 minutes or so to generate a low-res PDF (for print) of a 24pp document with a few placed images and vector graphics. Wow, that's a long time to wait, especially for a proof.
    Second, the background task... if I get it going on making that 8-minute PDF and then work some more on the document, what exactly is in the PDF? Usually I save before making a PDF or printing. So, is the last version saved what will be in the PDF?
    (As an aside, this ability to work on the doc while generating a PDF seems kind of weird. Generally one makes a PDF for proofing, or even for printing, when all the changes have been made and everything is "final". So, I see no benefit to being able to work on my document while it's making a PDF, as I'm probably finished making revisions for the time being. I have to say that I kind of like the progress bar you get when you make an interactive PDF, as you know you can't work on the document when that's on the screen... )
    Thanks as always.

    First, I have noticed that it seems to take a lot longer to get to a PDF. Any suggestions for how to speed up the process? It took 8 minutes or so to generate a low-res PDF (for print) of a 24pp document with a few placed images and vector graphics. Wow, that's a long time to wait, especially for a proof.
    Yes, this is abnormally long (and too long), something is wrong. What's the full version of InDesign you are running, as reported by holding down Cmd or Control and selecting About InDesign?
    Second, the background task... if I get it going on making that 8-minute PDF and then work some more on the document, what exactly is in the PDF? Usually I save before making a PDF or printing. So, is the last version saved what will be in the PDF?
    Saving is not related. InDesign makes a database snapshot of your document the moment you begin the PDF export, and makes the export relative to that snapshot, regardless of edits you continue to make during the export process, and regardless of saving. Of course saving first is a good idea, for several reasons, not the least of which it sounds like something's fairly seriously wrong with your document or your InDesign installation.
    We recommend you trash your preferences and export your document to IDML and see if either of those things changes this 8-minute behavior...err, assuming you're running 7.5.2.318.
    (As an aside, this ability to work on the doc while generating a PDF seems kind of weird. Generally one makes a PDF for proofing, or even for printing, when all the changes have been made and everything is "final". So, I see no benefit to being able to work on my document while it's making a PDF, as I'm probably finished making revisions for the time being. I have to say that I kind of like the progress bar you get when you make an interactive PDF, as you know you can't work on the document when that's on the screen... )
    Yeah, I think the primary benefit is if you are likely to work on 2 or more files in parallel, so you can finish A and export A and then switch to B. If you'd like a dialog box to pop up when export is done, check out my exportPop script from this post: ANN: automatic dialog after background export (exportPop.jsx.

  • White box around text in pdf

    Hi. In InDesign CS3, Photoshop 7.0 & of course Acrobat 7.0
    I made a Photoshop PDF & brought it into InDesign to export it into a PDF so I can make crop marks.
    The PDF in Acrobat & InDesign both had a white box around some of the text. I had embedded the fonts in Photoshop, so I do not understand why that happened. I went back into Photoshop & just retyped over where the box was appearing & this had solved the problem after I repdfed & imported it into ID. Acrobat viewed the text perfect then.
    I want to prevent this from happening in the future, does anyone know what I can do to look out for things like this?

    Very sorry--that's certainly information I should have included. I have Adobe  Acrobat 9 Standard, version 9.3.3. I'm creating the PDFs from within Microsoft  Word 2007 via the Acrobat tab on the ribbon, clicking "Create PDF."

  • Aliased text on PDF export with blending modes

    So I've had this issue with a pdf, I tried to export it CMYK, RVB, interactive pdf, regular pdf, with tons of different other options, the text was still very aliased.
    I decided to take it back from scratch, openned a new document with the same size, and copied/pasted element after element from the old one to the new one, exporting as pdf between each copy/paste. The first exports went really well, the render was great… until I pasted a vector element that was applied with a blending mode (overlay).
    When I switched it to normal, the pdf export was smooth again. Tried every blending mode, everyone makes the text jaggy. Switch back, it's ok. So I'm 100% sure that this comes from blending modes, as opposed to what I could have read on other forums.
    This is a request, please, InDesign team, take care of this problem, this is quite annoying in many cases.
    Thank you for your attention!
    Twitted here as well : https://twitter.com/grinderlabs/status/448381486627311616

    To minmize the possibility of rasterizing or outlining text when transparency is flattened, keep the text above any transparent objects. Blending modes, along with most effects, use transparency.
    You can also minimize the risk by exporting the PDF with live transparency, which is supported in Acrobat 5 or higher compatibility.

  • PDF prints with little boxes and question marks

    I prepared a document in Microsoft Publisher 360 and created a pdf with creative cloud.
    Looks great and prints great for me.
    I emailed it to a few people and it looks great on their screens. However, when they print it,
    it comes out with little boxes and question marks. 
    If I email them the publisher file it is fine.
    How I can get them the PDF file without all the odd markings?

    You probably used a font that is not on their system and did not embed the font in the PDF when you created it.  Don't feel bad.  We all have done it.  Just  make sure to embed your fonts in the Joboptions settings before you recreate the PDF.

  • PDF export with russian characters

    I'm too having issues with Russian Character pdf export even after using latest jars from this site.
    I am using RAD embedded crystal reports. I design the report in RAD in Russian Characters, Font Tahoma Size 8. The report Looks fine on screen. But after I export to PDF using Crystal Reports java APIs, some characters look jumbled and displace their positions.
    It gets worse when I take a print out of the generated PDF. It shows some extra characters which are not present in report
    I have arranged for screen shots.
    Here is how the report looks in Crystal Reports editor in RAD:
    http://picasaweb.google.com/Kumar.R.Anand/RussianPDFExport#5312667851561871138
    It looks perfect here.
    Here is how the report looks after pdf export:
    http://picasaweb.google.com/Kumar.R.Anand/RussianPDFExport#5312667851826410162
    some Characters moved to left leaving their original position empty.
    here is how the pdf looks after a print:
    http://picasaweb.google.com/Kumar.R.Anand/RussianPDFExport#5312667853461427426
    See extra characters inserted by printer.
    Please help me solve this issue.

    There's "E"s in the first screen shot you have.
    The "E"''s in the printed output, on the third screen shot, appears to be shifted to the left by 1/2 inch from its original location (in comparison with the first screen shot). 
    So my assumption is that this is a font glyph displacement issue.
    The last that I've encountered this issue was with TrueType fonts not entirely compatible with Java.  What happens if you look at the fontset using the Font2D sample app that comes with the Java SDK?
    Does this happen if you use a different font?
    Note that the old Crystal Designer in RAD uses ActiveX, so the comparison is not exact.
    My inference of font size difference is relative - differences between the non-bold and bold characters - how would the screenshot affect that?
    Sincerely,
    Ted ueda

  • Illustrator cs6: pdf export with hks colours creates b/w pdf...

    hello forum,
    i have a illu cs6 document with 2 hks colours and black. with »save as...« i want to create a printable pdf. but this pdf only has black-and-white, no hks, no colours.
    then i changed the hks to cmyk. now the export as pdf works with the cmyk colours.
    help, please, whats wrong?
    thanks :-)

    Try using the PDF/x-4 preset. If an all CMYK PDF is required, set the Color Conversion to Convert to Destination, and the Destination to Document CMYK.

  • CS3: PDF-Export Transparency Issue when Image-Links are missing

    I have a Layout with a transparent Frame on the top most Layer. For this Workflow-Step I do not have access to the original Image-Links, so I guess that all I see are the embedded Preview-Pictures and InDesign reports that all Object-Links are missing.
    If I export this Layout as JPG, the resulting JPG looks like the WYSIWYG in InDesign, which is suitable for this workflow-step. However when I export as pdf, the Frame is not transparent anymore. Instead it is filled with white color and covers the rest of the Layout. In Adobe Reader I can actually select the wrongly covered Picture at the border of the frame and copy&paste it somewhere and it looks fine.
    When I provide the original Frame-Picture and repair the missing Link in InDesign, PDF-Export works fine.
    I have installed & updated InDesign on a new Mac OS X 10.4.11, so all settings should be default.
    Transparency Blend Space is set to CMYK. I tried all default PDF-Export Profiles and tried a lot of different settings in the pdf-export dialogue including different PDF-File-Versions, Simulate Overprint on/off, Color-Conversion disabled, disabling Picture-Compression and much more. I also tried to Print a PS-File and then use the Distiller: same result.
    I use Adobe InDesign CS3 V 5.0.2 and tried Adobe Reader 8.1.2 and Adobe Acrobat Pro 8 to display.
    Any Ideas?

    Transparency flattening REQUIRES having access to the high-resolution images to get good results. One of the slogans I teach printers is "Fatten before you flatten." Meaning, replace the low-res images with high-res images.

Maybe you are looking for

  • Delta in source system doesn't work

    I've created delta-enabled generic datasource. The delta field is timestamp field. I've done Initial Delta run, posted couple new records with appropriate timestamps, tried to run delta but it doesn't work. Even on test delta run RSA3 in source syste

  • Livecycle Business Activity Monitoring - realtime

    hi I installed BAM on my dev server following the documentation ADOBE.and till now everything is OK Once connected to the dashboard I can see all processes with a few metrics already. but when  I try to invoke some process to see if I have some new i

  • Testing activities during Scrum

    <<This site is a SAP site, with this particular forum for asking questions about ABAP. I suggest you post your question in a Scrum forum>> Hello All, What are the various testing activities involved in different phases of Product Innovation Lifecycle

  • View on XmlType

    I am trying to create a view that flattens certain parts of a chunk of XML in Oracle 9i r2, e.g. create view cdp ("PNO") as select xmltype.extract( datapoint, '/*/data:PNO/text()', 'xmlns:data="urn:acq-osd-mil:damir:data"'). getstringval() from incom

  • Creating projects in Issue Tracker 0.9 application

    How do I create a new project from within the applicationin in the Issue Tracker application available at OTN? Right now I manually enter the project into the ht_projects table