Testing activities during Scrum

<<This site is a SAP site, with this particular forum for asking questions about ABAP. I suggest you post your question in a Scrum forum>>
Hello All,
What are the various testing activities involved in different phases of Product Innovation Lifecycle with Scrum?
Thanks a lot in advance.
Best regards,
Mishuti
Edited by: Matt on Nov 17, 2010 2:11 PM

HI,
Please follow the below.
Delete Delta queues from RSA7
Delete LBWQ
Delete Setup tables
Stop the R/3 transactions (Creation/Changing of Sales Documents).
Fill The setup tables
Run Init
After successful Init, transactions can be started.
Schedule V3 Jobs in the Job Control
Regards,
Srikanth

Similar Messages

Test Activities in BW after ABAP /JAVA Stack Split

Hi All,
We have recently EHP upgrade in our system .Now to improve performance we have done ABAP/JAVA stack split .
1.Can you please suggest what are the test activities should be done from BW side after upgrade ?
2.Can you explain what issue we might face ?
Please provide list of checks need to be performed specific to this split .
Thanks in advance .
Regards,
Jaya Tiwari

jaya tiwari wrote:
Hi All,
>
> We have recently EHP upgrade in our system .Now to improve performance we have done ABAP/JAVA stack split .
> 1.Can you please suggest what are the test activities should be done from BW side after upgrade ?
> 2.Can you explain what issue we might face ?
> Please provide list of checks need to be performed specific to this split .
>
> Thanks in advance .
>
> Regards,
> Jaya Tiwari
There are no standard issues in this split. Only thing you need to do is integration testing for scenario like SSO, Bex Reports etc.
Thanks
Sunny

Disable a test socket during execution (Batch Mode)

We are running a Batch Model with Batch Synchronization. I am wondering if it is at all possible to totally disable one or more of the test socket during execution. I know that the opening screen allows you to choose which sockets are active, but in the event that something goes astray like the RS-485 communication is non-responsive, I would like to disable one or more at anytime during the test. Thank you in advance for any ideas you come up with.
Regards
Scott
Environment: TestStand 2010
Solved!
Go to Solution.

I am not aware of how to stop a socket which is already running and facing an error midway.
But this setting will ensure that the socket is disabled for the next runs.
1) Override the preBatch callback.
2) Call this statement in the current executing thread to stop the socket from next run. ( precondition = on error)
RunState.Caller.Parameters.ModelData.TestSockets[RunState.TestSockets.MyIndex].Disabled=True

Activities during BW realization phase

Hello,
I want to know the details on what activities are performed during the realization phase of BW. If you have any document on this pls send it to me on prettyinkypinky at yahoo.com
Thanks,
Pal

Hi,
Adding to what is said above.
Realization ( Develop; Do a configuration review after this phase)
Check & Apply Latest Patches/Packages ...in BW & R/3 systems.
Activate/Build & enhance the cubes/ODS as per data model designs...maintain the version documents.
Identify & activate Info objects / Master data info sources / attributes, prepare update rules
Assign data sources .prepare transfer rules, prepare multi providers. Prepare Info packages.
Perform the unit testing for data loads?.both for master data & transaction data.
Develop & test the end user queries.
Design the process chains, schedule & test
Create authorizations / Roles ?assign to users..And test
Apply necessary patches & Notes if any freeze & release the final objects to quality systems
perform quality tests.
Re design if required. (Document changes, maintain versions)
Project Plan
http://help.sap.com/bp_biv270/documentation/BWProjectPlan_EN.mpp
http://help.sap.com/bp_biv270/index.htm
thanks,
JituK

Details on Data cutover activities during merger of 2 company codes

Hi all,
Basically we have 2 companies which will be merged to one. what would be
the data cutover activities (MM perspective) during merger?
May I know more details (particularly transaction details) on
Inventory upload,
physical inventories and value adjustments,
other open items/ balances in financial accounting,
Open PO and PR
Thanks in advance
Regards
JJ

Hi
There are lot of issues that you need to take care of:
1. is there any relation bwteeen the two company codes before merger. have they done any transactions between them? If yes, what wewould be the accounting treatment for the same. Would it be transferred at cost or Cost+Price (Transfer Price)
2. If you are in India, there would be effects of taxation like excise and vat calculations
3. One of the most important issue, is that of the new fiscal year. What strategy would you follow for the merged entity? In Sap, changing a fiscal year is a critical issue. Request you to refer SAP Help for the same. There are notes available for the same
4. What would be the strategy for Asset valuations? Are there different asset valuation procedures followed in the two company codes?
Thanks & regards
Sanil K Bhandari

Loading test steps during execution

Hello,
I am using the operator interface from the example. I have modified to suit my application. I run the test using the Single Pass entry point. I have 46 steps in my main sequence. When I press the Single pass execution, Initially it takes a lot of time (I think it compiles all the steps) to start the actual execution.
Why does it take long time to start execution? Is it possible to configure test stand such that it compiles each step as and when it reaches it?
Regards
Gopal

Hey Gopal,
As Ray said, TestStand does not actually compile your modules. That being said, most likely this load time that you're seeing at the beginning of execution is due to your load options set to load the module when execution begins. If you go to the step properties, notice under "Run Options" there's a "Load Option" drop-down. You can look at the help for a description of this property, but in general this setting refers to when the module is loaded into memory. For time-critical tests, you would want to load either at the beginning of execution or when the sequence file is loaded (as this would extract the load time from the step so that the step could be executed quickly); this is especially important if you are looping on a particular step. There is an option to "Load dynamically" as well. With this option, you would see a slight delay before each step during which its module is loaded - rather than a longer delay at the beginning (in which all step modules are loaded).
Note that the default is "Preload when execution begins"; that is why I'm guessing that this is responsible for the delay that you're seeing.
Thanks,
Andy McRorie
NI R&D

ABAP activities during EHP6 Upgrade

Hi All,
During EHP6, upgrade apart from SPDD, SPAU & UCCHECK adjustments, obsolete FMs - WS_UPLOAD, UPLOAD, WS_DOWNLOAD & DOWNLOAD should be replaced with the latest one from Z-programs.
What are the other ABAP activities & obsolete FMs that should be taken care for Z-developments in the system during EHP6 upgarde?

Dear Munish,
PF the SS as below. It is asking to do the ASU/Upgrade. .......One more thing From where i can see what will be the minimum SP of ECC 6.0 to Upgrade to Ehp6 ..
Regards
RK

Sequence of activities during Cutover and Go-live

Hi SDN team
Can you please help me on list of activities in sequence to be done during Cutover and during Go-live?
I would be grateful, if you can provide me the details at the earliest.
have a great day
Regards,
Sasi

Hi,
the general activities..
1. Cutover meeting with the steering Committe
2. Ask the client to stop his activity for cutover period.
3.Transporting the requests one by one...to prod
4.Analysis of the Configu
5.uploading the Master data
6.uploading transactional data
7.Analizing the request status..
8.Checking various Tcodes without Saving..
apartment from the above there will be various documentation activities...etc....
Thx
Raju

Hardware test bypassed during startup with yosemity

I have a mid 2007 20" iMac that I just rebuilt with a new 1 TB hard drive and 4GB of ram. Afterwards I upgraded to Yosemity 10.10.1. Today (3 days latter) it froze up, tried everything but had to hold power button in to shutdown. After restarting I tried doing the hardware test thats in my operator's manual holding the "D" key during power up. It was bypassed and opened straight to my desktop. Can I perform a hardware test with the new operating system?

That old AHT requires that you boot the computer from the AHT disc that came with your computer when it was new.
You might look at this article for how to get the old method back: Get Apple Hardware Test Boot Mode Back on Some OS X Lion Macs.

Interface test fails during mapping - Resource not found

Just upgraded from 7.1 SP8 to EHP1 SP3. Testing of the existing interfaces has been successful. I have created a very simple HTTP -> RFC Sync interface to complete the testing. When testing it in the integration builder I get the following message.
+Unable to find resource 5e0ce8a0-b99a-11de-9eb4-c576ac120353 in the following software component versions: urn:xxxxx.com:PI71com/sap/xi/tf/_MM_ONE_.class-1+
I've checked cache status overview in the ID and ESB and the updates were successful. I've checked the cache (SXI_CACHE) and the objects are there - correct object ID's. I;ve also performed a full cache refresh and that works. I then recreated the objects under a new SWCV and Namespace and get the same problem. It looks like the mapping object cannot be found. Checks of SDN and SAP help have mentioned a cache problem but we've ruled that out.
Any help you can offer would be appreciated.

I've just noticed something unusual about the entry in SXI_CACHE. Under mapping the type of mapping appears as 'JAVA_JDK'. When you click on the drop down box next to the entry the possible types of mappings are...
R3_ABAP
JAVA
Xi_TRAFO
XSLT
RS_XSLT
I'm not sure if this is an issue or not. I've checked SDN and SAP SUPPORT and I can't find anything.

Apple Hardware Test Freezing During Probing...

How long does the Apple Hardware Test to Probe?
I only have the keyboard and mouse plugged in...
and it still takes ages...
What is going on?

Well upon doing everything I can think of...
I use a Microsoft Mouse... and I removed it and replaced it with my old mighty mouse and now it doesn't freeze! and my mac is ok! It passed all the tests

Test fails during build - flex-pmd-ruleset

Hi, I have followed the developer documentation for how to build the project, on step 7 it fails because the following tests are failing inside flex-pmd-ruleset:
Failed tests:
testProcessViolatingFiles(com.adobe.ac.pmd.rules.unused.UnusedLocalVariableRuleTest)
testBuildMessageName(com.adobe.ac.pmd.rules.core.EmptyRuleTest)
testProcessViolatingFiles(com.adobe.ac.pmd.rules.naming.WronglyNamedVariableRuleTest)
testProcessViolatingFiles(com.adobe.ac.pmd.rules.unused.UnusedPrivateMethodRuleTest)
Tests run: 219, Failures: 4, Errors: 0, Skipped: 0
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD FAILURE
[INFO] ------------------------------------------------------------------------
[INFO] There are test failures.
I'm not sure how to fix these failures, any clues as what the problem may be? I ran "mvn package" from the flex-pmd-parent from the command line.
TIA,
Magnus

Thanks, I got past that. Unfortunately I am still having a problem comiling the PMD Flex Lib, I get these errors:
[ERROR] C:\MyProgramming\Flex\FlexPMD\src\flex-pmd-flex-lib\src\main\flex\Version.as:[1,1] Definition __AS3__.vec:Vector
could not be found.package{ public class Version { public static const BUILD_NUMBER : String = '1.0.RC4-SNAPSHOT'; publ
ic static const BUILD_TIME : String = '08:56:45'; public static const BUILD_DATE : String = '2009-09-16'; }}
[ERROR] C:\MyProgramming\Flex\FlexPMD\src\flex-pmd-flex-lib\src\main\flex\Version.as:[1,1] Definition __AS3__.vec:Vector
could not be found.package{ public class Version { public static const BUILD_NUMBER : String = '1.0.RC4-SNAPSHOT'; publ
ic static const BUILD_TIME : String = '08:56:45'; public static const BUILD_DATE : String = '2009-09-16'; }}
[ERROR] C:\MyProgramming\Flex\FlexPMD\src\flex-pmd-flex-lib\src\main\flex\com\adobe\ac\model\IDom ainModel.as:[1,1] Defin
ition __AS3__.vec:Vector could not be found./**
[ERROR] C:\MyProgramming\Flex\FlexPMD\src\flex-pmd-flex-lib\src\main\flex\com\adobe\ac\model\IDom ainModel.as:[1,1] Defin
ition __AS3__.vec:Vector could not be found./**
[ERROR] C:\MyProgramming\Flex\FlexPMD\src\flex-pmd-flex-lib\src\main\flex\com\adobe\ac\model\IPre sentationModel.as:[1,1]
Definition __AS3__.vec:Vector could not be found./**
[ERROR] C:\MyProgramming\Flex\FlexPMD\src\flex-pmd-flex-lib\src\main\flex\com\adobe\ac\model\IPre sentationModel.as:[1,1]
Definition __AS3__.vec:Vector could not be found./**
[ERROR] C:\MyProgramming\Flex\FlexPMD\src\flex-pmd-flex-lib\src\main\flex\com\adobe\ac\pmd\model\ ViolationPriority.as:[1
,1] Definition __AS3__.vec:Vector could not be found./**
[ERROR] C:\MyProgramming\Flex\FlexPMD\src\flex-pmd-flex-lib\src\main\flex\com\adobe\ac\pmd\model\ ViolationPriority.as:[1
,1] Definition __AS3__.vec:Vector could not be found./**
[ERROR] C:\MyProgramming\Flex\FlexPMD\src\flex-pmd-flex-lib\src\main\flex\com\adobe\ac\pmd\contro l\events\GetRulesetCont
entEvent.as:[1,1] Definition __AS3__.vec:Vector could not be found./**
[ERROR] C:\MyProgramming\Flex\FlexPMD\src\flex-pmd-flex-lib\src\main\flex\com\adobe\ac\pmd\contro l\events\GetRulesetCont
entEvent.as:[1,1] Definition __AS3__.vec:Vector could not be found./**
[INFO] ------------------------------------------------------------------------
[ERROR] BUILD ERROR
[INFO] ------------------------------------------------------------------------
[INFO] Error compiling!
[INFO] ------------------------------------------------------------------------
[INFO] For more information, run Maven with the -e switch
[INFO] ------------------------------------------------------------------------
[INFO] Total time: 1 minute 42 seconds
[INFO] Finished at: Wed Sep 16 08:56:47 CDT 2009
[INFO] Final Memory: 42M/508M
[INFO] ------------------------------------------------------------------------
Any ideas?
TIA,
Magnus

Automating Hyperion Planning Testing Activities

Hi All,
I would like to automate the following operations in Hyperion Planning from testing prespective.
1.Data retrival in web forms,
2.Calculation script execution,
3.Data sheet comparision
Could any one post your experiences on how we can go about with automating these stuffs.
Thanks a lot !
Mohan Mahadevan
Edited by: 909916 on May 15, 2012 3:22 AM

Hi,
Guess you have asked same question in essbase forum too- requesting the test process in essbase.
In Planning also, we do have the following
Unit testing,functional testing ,Performance testing , SIT and UAT..etc
Be specific If you have a specific concern .
Sandeep Reddy Enti
HCC
http://hyperionconsultancy.com/

Error in "Test IMPORT" during applying BASIS Support Package

Hi All,
I'm applying basis support package from SAPKB70014 to SAPKB70018,
now it hangs in Import phase: TEST_IMPORT, there maybe something wrong with the import object.
For detail screenshots, please kindly have a look at URL: http://nickfiles.150m.com/Question_1.html
And for the detail import log, please have a look at http://nickfiles.150m.com/SAPPB70015.html.
I think the root cause is located in:
2EETW165 Function "TMW_TAOAGENT (TMW_TAOINTERFACE|01)" does not fit into the existing function group "(TMW_CLIENT_INTERFACES|06)".
2 ETW167 Please transport the whole function group.
But I do not know how to solve it. Could anyone help me?
Thank you very much.
Best regards,
Nick

Hi Nick,
This is the solution to your Issue..
Note 1156706 - Function TMW_TAOAGENT (TMW_TAOINTERFACE 01) does not fit...
Other SAPnote you can read .. for your help..
Note 42379 - SPAM aborts at step TEST_IMPORT
Note 1092979 - TMW_TAOAGENT: Repairing function group after SAPKB70013
Hope it will solve your issue ....
All teh best !!

Activities to be avoided during Planned Order conversion

Hi,
I would like to know whether we need to avoid any other activities during production order creation by converting the Planned Order. Actually we faced a issue that one component is missing in the Production Order that is created by converting the planned order. When we check the BOM explosion and BOM components details, everything is ok, moreover backflushing is enabled for the missed component.
So i would like to know does we need to avoid any other activites during convertion of a planned order to a Production Order to avoid missing comonent in the Production Order. If yes, please mention what activities need to be avoided so that both produciton order and planned order components matches.
Thanks in advance

Hi,
Check your BOM and its components valid from date. For the missing component may not be valid on the day when you have created the planned order. If you want to select the BOM again, in the order you can read the master data, then the system will reexplode the BOM and it will copy the latest components.
If some BOM component is not copied in the planned order or production order, the reason is that particular material may not be valid on that particular day. Please check and correct the same.
Regards,
V. Suresh

Testing activities during Scrum

Similar Messages

Maybe you are looking for