um.... seems no one have met the same problem...

Similar Messages

Apple ID and PW changes create problems on IPad ICloud

I changed my Apple ID and password on the apple website but changing it on Ipad to connect with Icloud using new parameters seems to be a problem, will not accept new pw for deleting old account. Please help

Of course not. You need to first enter the old password to disconnect the old Apple ID.
What is it you are trying to do? Why do you need a NEW Apple ID instead of just changing your current Apple ID to use a new email address for example?
I hope you know changing your Apple ID - at least for iTunes - will remove your ability to use any apps that you have purchased using the old ID.

I have iphone 3gs having ios 4.1 and its really creating problem for me to install application like watsapp, viber and etc. when i was trying to install any apps the msgs comes on my screen to install ios 4.3 so can anyone guide me plsss

After installing ios 6 i lost all my data from iphone 3gs. now i hav ios 4.1 os and it doest support any application like watsapp viber and etc to install. can anyone guide me what can i do ?

After installing ios 6 i lost all my data from iphone 3gs. now i hav ios 4.1 os and it doest support any application like watsapp viber and etc to install. can anyone guide me what can i do ?

Need some help with cfoutput and a tag

hey there,
got meself into some issues with <a> and <cfoutput> tags.
Problem:
myResult = <a href="http://www.mysite.co.uk" rel="nofollow">mysite</a>
<cfoutput>#myResult#</cfoutput> outputs "<a href="http://www.mysite.co.uk" rel="nofollow">mysite</a>" (surprise isn't it?)
now is there any way to output it as html so it would display a link to "mysite"???
cheers,
Simon

thanks!
I've missed the fact that it was xml data. Just added .xmlText at the end and that sorted my problems. However I'll write down cfsavecontent solution for the future reference.
cheers,
Simon

Problem with Frameset and page session

All,
I am having a problem with Framesets and page session attributes. I
have a client who's application uses a three frame frameset. They
have a requirement on several pages that when a button is pushed two
different pages load into the right and left frames. The way they
are accomplishing this is that on the pages were this is required,
they are adding target="_top" to the form declaration in their JSP.
Then they store the page names they want to display in session,
forward the request to the frameset, the frameset then determines
which pages to display based on the session variables. This works
exactly how they want it to.
Here is our problem. We need to store some information in page
session attributes. We have tried to get a handle to the desired
view bean and call the setPageSessionAttribute method. However,
since we are forwarding to the frame and the frame handles displaying
the desired JSP, that view bean we had the handle to is not the one
that is created to hand the display of the JSP.
The next thing I tried was to use the request object. In the
handleBtnRequest method, I set an attribute in the request object. I
then query the request object in the beginDisplay event of the view
bean. When the frame is reset the request object does not contain
the attribute that I have set. I'm confused by this because I
thought the request object would be available to me throughout the
life of the request.
Given the above information, does anyone have any suggestions? Also,
am I going about this in the wrong manner.
The client had been storing this information in user session, which
seemed to work. However, since the data being stored dealt
specifically with data for the requested page, we felt that storing
it as page session was more appropriate.
Thanks,

The script on your page web page has some obvious bugs.. Best
fix those
first before looking to blame Flash.
Jeckyl

In the Firefox browser, when i click button in ADF page, then popup the OAF page in iframe tag,and then when i click the PPR bean in OAF page, then Firefox browser reload to ADF page. This is not the right response,browser should not reload the ADF pa

In the Firefox browser, when i click button in ADF page, then popup the OAF page in iframe tag,and then when i click the PPR bean in OAF page, then Firefox browser reload to ADF page. This is not the right response,browser should not reload the ADF page.It should stays in OAF page or goto another OAF page. and in other browser such ad IE,We get the right response.

hello, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
[[Fix problems connecting to websites after updating Firefox]]

Problem in creating New masthead iView

Hi,
I am trying to create a new Masthead iView from the par "<b>com.sap.portal.navigation.masthead</b>". I have opened the PAR in Developer studio with different name say "NewMasthead". I didnt change anything in the PAR and deployed the "NewMasthead" PAR.
Then i have created a new iView from the deployed PAR .I have selected the "default" component present it.
The problem is when i preview the iView it shows the Portal runtime error
An exception occurred while processing a request for :
iView : N/A
Component Name : N/A
com.sapportals.portal.navigation.HeaderiView.
Exception id: 05:32_24/05/06_0179_38431050
See the details for the exception ID in the log file
Can anyone help me to solve this run time problem. Thanks in advance.
Rgd,
Saravanan

Hi,
I have downloaded com.sap.portal.navigation.masthead. i renamed project as MyMasthead.par after importing it in NWDS and the deployed the .par file. Now I want to create a masthead iview for this newly deployed .par file.
What type of iview should I select and how will I select MyMasthead.par for this Iview. I mean should I go for a iview template or webdynpro iview or portal component iview and then where will I select the Mymasthead.par .
Please give me the detailed steps for creating the iview for masthead from newly deployed par file..

I want to go back to the previous 2014.2 version. .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

2014 .3 is much too buggy and full of error messages. Creating problems as I am on a timeline with my client and I don't have time to fool around with all the problems.

You didn't mention what error(s) you've encountered? A workaround for the most commonly hit problem is here Re: error in Muse : Object UID:U6875 has two (or more) owners: U3633 and U3165
If you have a copy of your .muse file that has not been saved using 2014.3, you can downgrade by uninstalling Muse and then choose Previous Version in the Filters drop down in the Apps panel of the Creative Cloud desktop app. There will be a popup next to Muse where you can select a prior version to install.

"Setup encountered a problem while validating the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run se

Team,
I am trying to Install Exchange on my Lab, getting below error
message.
The Schema Role is installed on Root Domain and trying to install
exchange on Child domain.
1 Root Domain - 1 Child domain. both are located on single site.
“Setup encountered a problem while validating
the state of Active Directory: Exchange organization-level objects have not been created, and setup cannot create them because the local computer is not in the same domain and site as the schema master. Run setup with the /prepareAD parameter and wait for
replication to complete.”
Followed below articles:
http://support.risualblogs.com/blog/2012/02/21/exchange-2010-sp2-upgrade-issue-exchange-organization-level-objects-have-not-been-created-and-setup-cannot-create-them-because-the-local-computer-is-not-in-the-same-domain-and-site-as-the-sche/
http://www.petenetlive.com/KB/Article/0000793.htm
transferred the schema roles to different server on root domain, still no luck.
can someone please help me.
regards
Srinivasa k
Srinivasa K

Hi Srinivasa,
I guess, you didn't completed the initial setup schemaprep and adprep before starting the installation. You can do it as follows:
1. Open command Prompt as administrator and browse to the root of installation cd and run Setup.exe /PrepareSchema /IAcceptExchangeServerLicenseTerms
After finishing this,
2. Setup.exe /PrepareAD /OrganizationName:"<organization name>" /IAcceptExchangeServerLicenseTerms
3. To prepare all domains within the forest run Setup.exe /PrepareAllDomains /IAcceptExchangeServerLicenseTerms. If you want to prepare a specific domain run Setup.exe /PrepareDomain:<FQDN of the domain you want to prepare> /IAcceptExchangeServerLicenseTerms
4. Once you complete all of the 3 steps, install the pre-requisities for Exchange 2013
5. Finally, run the setup program
Hope this will help you
Regards from Visit ExchangeOnline |
Visit WindowsAdmin

I have been creating forms in InDesign and pulling into Acrobat XI Pro to do form fields. My client would like to fill in the PDF form, save under a different name locally on their device, and redistribute. The problem I have is that, sometimes, they want

I have been creating forms in InDesign and pulling into Acrobat XI Pro to do form fields. My client would like to fill in the PDF form using Reader, save under a different name locally on their device, and redistribute. The problem I have is that, sometimes, they want to redistribute the form as Read Only. I know how to flatten the form on a mobile device, but uncertain how they can do that with a PC or Mac using Adobe Reader. I looked at FormsCentral thinking there might be a solution going that route, but don't believe there is. Any advice?

FormsCentral won't help with flattening a form. You could set up the form in Acrobat so that the fields are set to read-only, using JavaScript. Not quite the same as flattening but it's the best Reader can do.
Note that when Reader is used to e-sign a document, it gets flattened, but this won't be possible if you need to Reader-enable the form and under certain other conditions.

When firefox checking for updates and updates found but due to proxy restrictions it unable to download the updates then it continue trying to download that and this time it creating problem on running javascript

When firefox checking for updates and updates found but due to proxy restrictions it unable to download the updates then it continue trying to download that and this time it creating problem on executing javascript and raising errors.

What are the error messages you are seeing?

HT1386 I replaced my iPad and now don't see the iPad backup in iTunes. Any advice? Should I use my latest iPhone backup or will that create problems?

I swapped out my broken iPad for a new one, and went to sync in iTunes and only see my iPhone backups. Should I use those to back it up (most of the apps are the same across both, and same with the email, calendar, and contacts settings). Will that create problems if I use the same backup for two devices? Thanks!

No it will not create problems but if the iPad that you got is running an iOS less than what you are running on the iPhone, you will have to update the iPad first, before you can restore from the phone backup. You can't use the backup of a newer iOS on a device running an older iOS without updating the device first.

Adding iframe tag problems

In my application I urgently need to add iframe and display it correctly. I have tried this in two ways: 1. tomahawk:htmlTag and 2. http://jsftutorials.net/htmLib:iframe. Using first option I can not set frameborder properly. The second one does not rednder end tag </iframe> so the page becomes corrupted. Using f:verbatim is not an option. Is there any other tag library which allows using <iframe> tag in jsf framework. Any other ideas? Please help.
Thanks and regards, Simy

Try Jenia - http://www.jenia.org
They have a popup iframes - http://www.jenia.org/TestPopup/

I create a project w/iMovie and I have two problems: When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen. Help!

I create a project w/iMovie and I have two problems: When I try to finalize the project iMovie crashes; when I share to DVD sometimes it crashes also; if I can successfully send it to DVD and then burn a DVD there are wavy lines on the screen. I'm uising photos in my project, not video. Help!

You can split a project in two by doing this.
1) Go to the Project Library View.
2) Select your project, and click FILE/DUPLICATE PROJECT. Give it a name like "your project name - part 1".
3) Do this again. This time name it "your project name - part 2"
4) Open Part 1 for editing. Delete everything in the second half.
5) Open Part 1 for editing. Delete everything in the first half of the project.
At the end you should have your original project, plus the same project in two parts.

I have an Itel based iMac on which I created a Wifi network using Airport. My iPhone5 uses the Wifi on my iMac and still works.My problem is that I can't remember the Wifi password and it is not in my Keychain.

I have an Itel based iMac on which I created a Wifi network using Airport. My iPhone5 uses the Wifi on my iMac and still works.My problem is that I can't remember the Wifi password and it is not in my Keychain. What can I do so that I can connect other devices to my Wifi?

Read the router's user manual on how to change your password.
If you are going to select another password, make sure it's one that you will NEVER forget AND no one else can figure it out. Print it out & keep in a safe place. A place that ONLY you know about AND never forget.

Frameset and iframe tags creates problem in IVIEW

Similar Messages

Maybe you are looking for