Free Goods - PRODH1 and PRODH2 are not populating

Hello,
We setup the Free Goods and created new access sequences with PRODH1 and PRODH2. While the whole PRODH is working,
PRODH1 and PRODH2 are not. They don't seem to populate in KOMP. Which user-exit we need to populate them in?
Thank you!

Hello Mila;
I'm facing the same problem as you with the material hierachies. I need to set up a free good promotion based on PRODHx but the KOMP is not being populated.
We made already the adjusments in USEREXIT_MOVE_FIELD_TO_KOMP but still is not working. We are reading PRODHx from VBAP but now we have a problem with the UoM.
Could you please share with us how you solve this issue?
Thank you in advance.

Similar Messages

Why Pages, keynotes, and Numbers are not free? I bought my mac Oct 14, 2013

Why Pages, keynotes, and Numbers are not free? I bought my Mac at Oct 14, 2013. With the new OS X Mavericks relaeaed, Apple said that these three Apps are free to new buyers, I bought Macbook Air last week. Why I didn't see these three Apps free after I logged in the Mac App Store?
Please, Help!

***For those that purchased iWork 09 not on the app store but as a retail disk copy you can get the update for iWork even though it may show $19.99 for all the apps:
You can reupdate to iWork 9.3 by going here http://support.apple.com/kb/DL1563
then after it is updated close the app store if opened then open it again and sign out then sign in and then all the iwork 2013 apps should show as update rather than $19.99 cost each. This worked for me. I bought iwork '09 on disk but it showed 19.99 each after I upgraded to Mavericks so followed the above steps and it worked. I am now updating all my iWork suite I bought on disk, NOT on the Mac app store and now I have a Mac app store set!
Apple sure has a problem that needs to be fixed otherwise iWork will eventually be free for everyone...
Someone at Apple forgot all of us old retail people before the Mac App store existed!

Why Pages, keynotes, and Numbers are not free?

Why Pages, keynotes, and Numbers are not free? I bought my Mac at Oct 14, 2013. With the new OS X Mavericks relaeaed, Apple said that these three Apps are free to new buyers, I bought Macbook Air last week. Why I didn't see these three Apps free after I logged in the Mac App Store?
Please, Help!

Don't keep reposting this over and over! Or you posts will be deleted.

Benefits and Payment - overview table and drop down are not populated

Hi All,
Overview dropdown and table are not getting populated. I have checked the flow of code in Web Dynpro
1)Vcrem2Comp
2) Component FcRepFramework
Tried to check whether these values are coming from ABAP side by using
wdcomponentapi message manager.
Please guide
Regards,
Ganga

Below is the code i am using:
    @Override
    public void start(Stage stage) throws InterruptedException {
        // create the scene
        stage.setTitle("Test");
        Pane stackPane = new Pane();
        Browser browser = new Browser();
        stackPane.getChildren().add(browser);
        Rectangle2D primaryScreenBounds = Screen.getPrimary().getVisualBounds();
        webScene = new Scene(stackPane, primaryScreenBounds.getWidth(), (primaryScreenBounds.getHeight()-50), Color.web("#666970"));
        //webScene.getStylesheets().add(this.getClass().getResource("main.css").toExternalForm());
        stage.setScene(webScene);
        stage.show();
class Browser extends Region {
    final WebView browser = new WebView();
    final WebEngine webEngine = browser.getEngine();
    public Browser() {
        //apply the styles
        getStyleClass().add("browser");
        // load the web page
        String url = "http://localhost:8000/myApp";
        webEngine.load(url);
        //add the web view to the scene
        getChildren().add(browser);
When i run with normal url, the drop down are coming in bigger font size and bold. But when i run through Javafx, the drop down list items are coming as small size and normal font. I can provide the screen shots but not sure how to paste the images here or attachments. Let me know if any more information is required.

I HAD AN IPHONE AND DOWNLODED MANY PAID AND FREE APPS.MY IPHONE AND LAPTOP ARE NOT WORKING NOW.HOW DO I DOWNLOAD THE APPS INTO MY NEW LAPTOP SO THAT I CAN SYNC WITH MY NEW IPAD

I HAD AN IPHONE AND I DOWNLOADED MANY PAID AND FREE APPS FROM ITUNES STORE.NOW MY IPHONE AND LAPTOP ARE NOT WORKING.HOW DO I GET THESE APPS INTO MY NEW LAPTOP SO THAT I CAN SYNC WITH MY NEW IPAD

How to redownload purchased apps from the App Store

Free goods by header net value not Quantity

Regards
My client wants to make a sales promotions as the free goods SD. The difference is that free goods should not be given by the bought quantity of certain material, they should be given from the header net value of an order.
For example:
If a customer have an order with header net value of 100$ from only materials that has certain material pricin group, it should receive one free good.( All the materials in the order have the same material pricing group)
If a customer have an order with header net value of 200$ from only materials that has certain material pricin group, it should receive two free goods.
If there are ways to make this happen please let me know i would really appreciate it.
Thanks
Edited by: Ronald Caroli on Feb 13, 2008 9:13 PM

Hi ronald,
The userexit option is very tough to do.
You are using a right userexit, but how are you coding it? Whats your design and flow?
The BDC are programmable recordings of a standard transaction. Hence you will be able to record the way in which you add a line item to sales order. Ths recording is automatically converted into lines of code by SAP. Then you insert your checks and balances between these lines of code to make it behave the way you want the sequence of transactions to work.
My thought was to make a recording of adding a new line item, in change sales order transaction(va02), with item category as Free of Charge(FOC). Then in the code, I wanted to check for material pricing group, if found correct, then would go finding the net value of sales document. If the value is above the limit, calculate the target quantity. Then follow the rest of the recording and add a new line with FOC as item category.
But this was a seperate transaction, which could be applied seperately and not to be done automatically in sales order. This was becuase say if you switch off the promotion tomorrow, then you will not have to worry abt removing the same functionality from sales order, you just need to de-activate the transaction.
Then there would be issues of doing hardcoding the net value limits, free good quantity in the user exit which is not at all recommended.
Hope this helps.
Abhishek

Cyan and yellow are not printing on HP officejet pro 8500 all-in-one printer A909

I have an Officejet Pro All-in-One 8500 A909a printer, using OS X operating system. Cyan and yellow are not printing. I've ran the Print Quality Diagnostics Page and they do not show up there or on the align page. My ink levels are good.
Can you help me find and fix the problem?
Thanks

Hi DavidM2,
Welcome to the HP Forums.
I see that you are having issues with the Cyan and the Yellow ink cartridges as well.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
If you are still having issues then try to replace the cartridges.
Let me know how you make out and if you have any other questions, feel free to ask.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP

IPhoto - pictures are not populating

All of a sudden, my pictures within iphoto are not populating. I can see the outline, but the pictures are not there.

Hi Van,
did you do anything right before this started happening?
did you have a crash or have to force quit iPhoto?
Did you rename any photos or folders in the iPhoto Library folder in the finder?
do you have the latest version of iPhoto?
have you tried a rebuild yet?
Try this:
Before doing a rebuild make sure iPhoto's trash bin is emptied. You can do this by control clicking on the trash bin, or from the menu bar under iPhoto.
Close iPhoto
Duplicate the iPhoto Library folder
Drag the duplicate to the desktop (hopefully you have enough room on your hard drive for the duplicate.)
Launch iPhoto holding down the Command and Option keys until you see the rebuild options screen.
Choose the first three options. If you were missing photos in your library, also choose the last option. Be advised that you will get a roll of orphaned photos and it might be quite huge. Most of them will already be in your iPhoto library, but use caution when deleting anything from this roll until you are sure the photos are still in your library in another place. It might be a good idea to share/export this roll of photos just in case you need to import them again.
Back to the rebuild, depending on the size of your library it might take some time. When it is done, hopefully your photos will be there.
You might see some unexpected results as I did when I did a rebuild. Photos had been moved to wrong dates, video clips had lost their duration info and some were even orphaned from the jpg pointer file. It took me some time to straighten it out again.
This is the reason to make a duplicate before you rebuild, in case you do not like the result. If you don't like the result, close iPhoto, then delete the rebuilt library and drag the duplicate back into the Pictures folder making sure the name is iPhoto Library. Launch iPhoto and it should open the library in the Pictures folder.
iPhoto 4 or later: Rebuilding the iPhoto Library
Lori

Keyboard and trackpad are not working, Keyboard and trackpad are not working

I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".

Please help! I defragged my hard drive and now Illustrator CS6 is trying to open all of my complex Illustrator files with a "Text Import Options" box as if they are text files, and they are not opening!

Please help! Illustrator CS6 started trying to open all of my complex.ai files with a "Text Import Options" box as if they were text files, and they are not opening! Help!

Hi Monika,
I have spent the last two or three days trying to do what you suggested. I uninstalled Adobe 6 from Windows. Some files that CS6 placed on my system during installation remained, including fonts and .dll files.
I had to abandon the Cleaner Tool you suggested because in one screen it allowed me to specify removing CS6 only, but on the following screen it only gave on option to remove ALL Adobe programs. I could not do that because I didn't have the serial number handy for CS3 in case I want to reinstall it at some point.
I tried to get technical help with the Cleaner Tool problem but no definitive help was available, so I reinstalled CS6 again without having the benefit of the Cleaner Tool. I tried to get the serial number for CS3 so I could use the Cleaner Tool but spent 2 wasted hours in chat. Even though I had a customer number, order number, order date, place of purchase, the email address used AND 16 digits of the serial number, in two hours the agent couldn't give me the serial number. After two hours I had nothing but instructions to wait another 20 minutes for a case number.
Illustrator CS6 is still trying to open some backups as Text and otherNone of the problems have been fixed. I have tried to open/use the .ai files in CS6 installed on another system and am getting the same result, so I don't think the software was damaged by the cleaner. The hard drive cleaner is well-known and I've run it many times without any problem to previous versions of Illustrator or any other programs.
When I ordered, the sale rep promised good technical support and gave me an 800 number, but after I paid the $2000, I learned that the 800 number she gave me doesn't support CS6 and hangs up on me. Adobe doesn't call it a current product even though they just sold it to me about 3 weeks ago.
Would appreciate any help you experts can offer. If I can't solve this, the last backup I can use was from June and I will have lost HUNDREDS of hours of work and assets that I cannot replace.
Exhausted and still desperately in need of help...

Deduplication: how to identify which files are "in-policy" (and which are not)?

Dear experts,
in eventlog I find the following information for one of my deduplicated volumes:
Volume: F: (\\?\Volume{9794e270-fb08-487e-979b-8a08fa9ca311}\)
Error code: 0x0
Error message:
Savings rate: 24
Saved space: 853327714684
Volume used space: 2681869406208
Volume free space: 66771247104
Optimized file count: 1199618
In-policy file count: 1188049
Job processed space (bytes): 0
Job elapsed time (seconds): 2
Job throughput (MB/second): 0
Some things look strange to me:
- The savings rate is only 24% which looks odd because I get about 40% on other file shares with similar characteristics.
- The "Optimized file count" is higher than the "in-policy" file count.
- The volume has about 3.5 million files but only 1.1 million files are "in-policy".
My understanding of "in-policy" files is that all files are in-policy which are older than 3 days (if not configured different, which is not the case) and which are not contained in an excluded folder (nothing configured here) and which have no
excluded file extension (nothing configured here apart from the default). Right?
I'm sure that only a small fraction of the files on this volume are younger than three days, so something seems to be wrong there, but I have no idea how to find the cause of the problem.
Is there any way to identify the files (full path) which are considered to be not "in-policy"?
How can I find out if the optimization process really looks at all files - and doesn't skip a million?
Thanks!
Regards
Christoph

Mandy, thanks for your feedback! I've read these technet articels, but I couldn't learn something really helpfull related to my problem there. To make investigation of the problem easier I did the following:
- created a brand new empty volume (x:) on the same server
- enabled data deduplication on that volume with a minimal file age of 0 days
- copied about 2GB of data from the problem-volume in 15450 files to this new volume
- started "Start-DedupJob x: -Type Optimization -Memory 50"
After a few seconds that job completed and I got the following result:
Volume: X: (\\?\Volume{d1ba9ed8-28f1-44d1-9535-fe603d6a70c6}\)
Error code: 0x0
Error message:
Savings rate: 0
Saved space: 12360718
Volume used space: 3091664896
Volume free space: 7610097664
Optimized file count: 153
In-policy file count: 153
Job processed space (bytes): 46095214
Job elapsed time (seconds): 9
Job throughput (MB/second): 4.88
The question is: why are only 153 files in-policy?
All files (of more than 15000) are of course "older than 0 days", there are no excluded folders configured, there are no excluded extensions configured, no file has one of the default excluded extensions and more than 1000 files are bigger than 100kB
(minimal size for deduplication is 32kB). So what makes only 153 files qualify for deduplication?
My impression is that there are further undocumented requirements which have to be met by a file to qualify for deduplication. But if there's no detailed log of an optimization run available how to find out what's going on?
(Or is something going wrong on my server?)
Kind Regards
Christoph

My headphones speakers and microphone are not working please help

hi i have had my hp windows 7 lap top for 2 years and never had a problme but recently my speakers and microphone are not working even if i put in my headphones i have installed new audio drivers checked my sound settings and did a restore to a date and a factory reset and still no sound ( my speakers say there working the geen bar goes up and down showing the volume but still no sound) please help me thanks

Hi,
Please use the following instructions to check and fix:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01912228&cc=ad&dlc=en&lc=en&jumpid=reg_r1002_us...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Report Painter values are not populating for a particular cost center

Report Painter(GR55) values are not populating for a particular cost center for the months of April 1 2011 where as for May onwards values are displaying correctly..We have check the transaction code KSB1 for this cost center there are some values posted for the period of April..
Can any one help me to find out where exactly the issue is and how to resolve the same..

Please check your variables in your report.

Chain and store data not populating properly in BPARTNER

Hi all,
There is a field 0bpartner2 in the data source name 0BP_RELATIONS_ATTR. This field is also there in DSO1 which fetches the data from the mentioned datasource. Then using routines this field 0bpartner2 splits into two-->chain and store which are getting populated in the next level of DSO, DSO2 which finally goes into 0bpartner infoobject.
But for two particular bp nos the values of chain and store are not getting populated.
Checked in RSA3, the data is OK, but in the PSA level the data is not there.
This is happening only for this two particular bp nos.
Kindly help.

Hi,
at info package data selection don't have selection please check the below options.
1. go to ECC -> enter the t code- RSA5 -> select the data source -> go to change mode -> select the check boxes possibility.
2. if not there come to BI system select the data source go to change mode -> select selection menu -> browse and choose the X- selection possible.
now it available selections at info package - while seeing the RSA3 data give the selection at info package
Thanks,
Phani.

Entity Attributes are not populating while creating EO using EO wizard.

Hi,
I am using JDeveloper version 10.1.3.3.0.3 and E-Business suite12.1.2.
I am facing problem while creating EO using EO wizard.
In Entity Object Editor Entity Attributes are not populating while creating EO.
Please help me resolve this issue.
Thanks & Regards,
Sagarika

Please ensure you click on Tables and Synonyms check box and select proper schema.
Try to select the table from the list after this instead of writing as in 10.1.3 when we write table name it automatically selects from the list if it exists in the list.
Thanks
AJ

Free Goods - PRODH1 and PRODH2 are not populating

Similar Messages

Maybe you are looking for